Consumption value updated for zero value materials

Hi Masters
I have maintained value of a material in material master as zero.Although it is maintained zero, When the material is issued using 261 accounting document got generated and showin the following entries
  Inventory a/c
Consumption a/c(+)
How it is happening?
Regards
Mohan

hi,
Check your price control it would be MAP...
REASON :
Suppose you post the GR at price of 100/pc...where as in MMR the price is ZERO...
Now when you post the GR at 100/pc...the MAP changes in the MMR automatically...ie. via total value / total stock...so the MAP doesn't remain ZERO now...
So, now when you post the GI, the current MAP is taken from MMR ie. Non-ZERO value and so system post the accounting document while GI...
I hope the matter is clear now..
Regards
Priyanka.P

Similar Messages

  • Stacked 100% bar chart - Problem with datatips for zero value data points

    I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
    data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
    Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
    Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
    <?xml version="1.0"?>
    <s:Application
    xmlns:fx="
    http://ns.adobe.com/mxml/2009"xmlns:mx="
    library://ns.adobe.com/flex/mx"xmlns:s="
    library://ns.adobe.com/flex/spark"creationComplete="initApp()"
    height="
    1050" width="600">
    <s:layout>
    <s:VerticalLayout/>
    </s:layout>
    <fx:Script><![CDATA[ 
    import mx.collections.ArrayCollection;[
    Bindable] 
    private var yearlyData:ArrayCollection = new ArrayCollection([{month:
    "Aug", a:1, b:10, c:1, d:10, e:0},{month:
    "July", a:1, b:10, c:10, d:10, e:0},{month:
    "June", a:10, b:10, c:10, d:10, e:0},{month:
    "May", a:10, b:10, c:10, d:0, e:10},{month:
    "April", a:10, b:10, c:0, d:10, e:10},{month:
    "March", a:10, b:0, c:10, d:10, e:10},{month:
    "February", a:0, b:10, c:10, d:10, e:10},{month:
    "January", a:10, b:10, c:10, d:10, e:10}]);
    private function initApp():void {}
    ]]>
    </fx:Script>
    <s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
    <s:layout>
    <s:HorizontalLayout/>
    </s:layout>
    <mx:BarChart id="myChart" type="stacked"dataProvider="
    {yearlyData}" showDataTips="true">
    <mx:verticalAxis>
     <mx:CategoryAxis categoryField="month"/>
     </mx:verticalAxis>
     <mx:series>
     <mx:BarSeries
    xField="a"displayName="
    aaa"/>
     <mx:BarSeries
    xField="b"displayName="
    bbb"/>
     <mx:BarSeries
    xField="c"displayName="
    ccc"/>
     <mx:BarSeries
    xField="d"displayName="
    ddd"/>
     <mx:BarSeries
    xField="e"displayName="
    eee"/>
     </mx:series>
     </mx:BarChart>
     <mx:Legend dataProvider="{myChart}"/>
     </s:Panel>
     <s:RichText width="700">
     <s:br></s:br>
     <s:p fontWeight="bold">The problem:</s:p>
     <s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
     <s:br></s:br>
     <s:p fontWeight="bold">For example:</s:p>
     <s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
     <s:br></s:br>
     <s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
     <s:br></s:br>
     <s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
     <s:br></s:br>
     <s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
     <s:br></s:br>
     <s:p fontWeight="bold">Challenge:</s:p>
     <s:p>How can we hide/remove datatips for zero value data points?</s:p>
     <s:br></s:br>
     </s:RichText></s:Application>

    FYI.
    Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.   
    Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
    http://bugs.adobe.com/jira/browse/FLEXDMV-2478
    Which is a clone of a similar issue with Flex 3 ...
    http://bugs.adobe.com/jira/browse/FLEXDMV-1984

  • Transfer within a company for zero value assets

    Hi experts,
    I am transferring zero value assets (no acquisition cost, no depreciation, zero NBV) from 1 business area to another business area, therefore use tcode ABUMN (Transfer within company code) with transfer variant 4 (Transfer within a company code).
    However, the transaction is not able to take place with the following error message:
    "Retirement/transfer on asset xxxx 0 takes place with no values."
    Actually in performing asset retirement, the same message appear, but it is just information (yello) and could be ignored (transaction still go through sucessfully).
    Is there any configuration that needs to be done in order to perform retirement and asset transfer without error messages? Is there anything i need to enter when doing the transactions?
    Your sharing will be very much appreciated.

    Hi Paul,
    Thanks !
    In this case, the old asset will be showned as asset retirement instead of intracompany assets transfer. Is there any way to do a transfer for this type of transaction?

  • Import Procedure for Zero Value Materials (Free of cost)

    Dear all,
    Our client have business scenario that they are getting Import Materials for Rs. 0/- (Sample material), and we all know that at the time of receiving from the customs we have to clear customs duties based on the value of the material. Since for our client its free of cost, how to make process in SAP and to maintain the customs conditions.
    Normally we will make process if there is value in Purchase order.
    PO => MIRO => J1IEX => MIGO => J1IEX => MIRO.
    Kindly let me know if anybody have done this scenario.
    regards,
    Dhanu

    Dear Sir,
    I am also in Import dept and now working in SAP . hope the same problem will come to us in future.
    1. U rise the P.O for the exact value .
    2. Bill pass the customs duty in MIRO while paying duty.
    3. then amend the orderand make the value for the material in P.O as zero.
    Somasundaram

  • In ColumnChart, how to stop displaying small column for zero value?

    I'm trying to create a ColumnChart that does not display a column when the value is zero. The chart currently looks like this:
    This is a stacked column chart with red values representing Faults and green values representing Throughput. Each hour has an explicit value of zero for Faults. I don't want to see any red lines when the value is zero. Is there any way to accomplish this?
    My code looks like this:
    <mx:Script><![CDATA[
         import mx.collections.ArrayCollection;
         [Bindable]
         public var simpleStats:ArrayCollection = new ArrayCollection([
            {Hour:"0:00", Throughput:0, ThroughputThreshold:2000, Faults:0, MaxResponseTime:450, AvgResponseTime:200, MinResponseTime:180,
                 AuthenticationAcceptance:50, AuthenticationRejection:0, AuthorizationAcceptance:50, AuthorizationRejection:0},    
            {Hour:"1:00", Throughput:0, ThroughputThreshold:2000, Faults:0, MaxResponseTime:450, AvgResponseTime:200, MinResponseTime:180,
                 AuthenticationAcceptance:50, AuthenticationRejection:0, AuthorizationAcceptance:50, AuthorizationRejection:0},    
            {Hour:"2:00", Throughput:0, ThroughputThreshold:2000, Faults:0, MaxResponseTime:450, AvgResponseTime:200, MinResponseTime:180,
                 AuthenticationAcceptance:50, AuthenticationRejection:0, AuthorizationAcceptance:50, AuthorizationRejection:0},    
            {Hour:"3:00", Throughput:5, ThroughputThreshold:2000, Faults:0, MaxResponseTime:450, AvgResponseTime:200, MinResponseTime:180,
                 AuthenticationAcceptance:50, AuthenticationRejection:0, AuthorizationAcceptance:50, AuthorizationRejection:0},    
            {Hour:"4:00", Throughput:0, ThroughputThreshold:2000, Faults:0, MaxResponseTime:450, AvgResponseTime:200, MinResponseTime:180,
                 AuthenticationAcceptance:50, AuthenticationRejection:0, AuthorizationAcceptance:50, AuthorizationRejection:0}
      ]]></mx:Script>
                                     <mx:ColumnChart id="trafficChart"
                                        dataProvider="{simpleStats}"
                                        showDataTips="true" width="500" height="100%" seriesFilters="[]"
                                        type="stacked">
                                        <mx:verticalAxis>
                                            <mx:LinearAxis title="Messages" id="a1"/>
                                        </mx:verticalAxis>                                   
                                        <mx:horizontalAxis>
                                           <mx:CategoryAxis
                                                   id="TrafficTimeAxis"
                                                dataProvider="{simpleStats}"
                                                categoryField="Hour"
                                                />
                                        </mx:horizontalAxis>
                                        <mx:horizontalAxisRenderers>
                                            <mx:AxisRenderer axis="{TrafficTimeAxis}" canDropLabels="true"/>                                       
                                        </mx:horizontalAxisRenderers>                                            
                                        <mx:series>                                                                         
                                           <mx:ColumnSeries
                                                yField="Faults"
                                                displayName="Faults"
                                                fill="{sc2}"
                                                stroke="{s2}"
                                                 minHeight="0">
                                           </mx:ColumnSeries>                                                                                                          
                                           <mx:ColumnSeries
                                                yField="Throughput"
                                                displayName="Throughput"
                                                fill="{sc1}"
                                                stroke="{s1}"
                                                minHeight="0">
                                            </mx:ColumnSeries>                                      
                                        </mx:series>
                                     </mx:ColumnChart>

    Answered my own question!!
    The solution is to set the stroke for the ColumnSeries to {noStroke}, which I defined like this:
        <mx:Stroke id="noStroke" color="0xFFFFFF" weight="0"/>
    Note that if you define {noStroke} without a color property, black is used by default, which means that those columns that do appear show up in black stroke outline.
    If there's a more elegant solution to the problem, please let me know...

  • Export Excise invoice updating with zero value

    HI cin gurus.
    While creating excise invoice for Exports in J1IIN , after selecting the Export button Excise values getting changed as zeros . ARE1  form coming with zero
    Any reason for that.
    Expecting your support
    Thanks
    JA

    Dear Jaffer,
    i think you have to apply this user exit
    FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
    ""Local Interface:
    *" IMPORTING
    *" REFERENCE(YVBRK) TYPE VBRK
    *" EXPORTING
    *" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
    *If you do not want the excise duty to be calculated for a particular
    *transaction then you need to mark the flag supress_calculation as 'X'
    *This flag when left blank will trigger calculation of ED during j1ii
    *When it is marked, the ED copied from billing will be left as it is
    SUPPRESS_CALCULATION = 'X'.
    ENDFUNCTION
    Regards,
    Anand.K

  • InDesign CS3 crash during document open (at XML Attribute Value update for locked item)

    OS: Windows XP
    InDesign: InDesign Release 5.0.0.458   
    Plugins: No additional plugins
    I am facing crash in InDesign at following workflow
    Steps:
    1. Create a new document.
    2. Create a graphic frame.
    3. Place an Image (C:\TESTDIR\images\test-image.jpg)
    4. Tag the graphic frame (Right Click -> Autotag).
    5. Lock the layer.
    6. Save the doc at (C:\TESTDIR\files\test-doc.indd).
    7. Move the image file to (C:\TESTDIR\)
    8. Open the same document.
    9. InDesign Crash.
    Crash log:
    Adobe InDesign Protective Shutdown Log
    06/01/09 14:48:51
    Unhandled error condition
    Session started up at 2:44 PM on Monday, June 01, 2009
    Version: 5.0.0 - Build: 458
    Error Code 0xbfcd: "Cannot modify elements that contain locked content, or are contained by locked content. Please unlock or check out the content and try again."
    Command Sequence:
    > kOpenFileWithWindowCmdBoss = ""
    > kOpenFileCmdBoss = ""
      > kOpenDocCmdBoss = ""
       > kSetDocNameCmdBoss = ""
       > kSetDocNameCmdBoss = ""
    > kSetAllUsedStyleCmdBoss = ""
      > kSetAllUsedStyleCmdBoss = ""
    > kRestoreLinkCmdBoss = "Restore Link" : kBeforeDoMessageBoss @ kDocBoss (IID_ICOMMANDMGR)
    > kSetAssetAttributesCmdBoss = "" : kBeforeDoMessageBoss @ kDocBoss (IID_ICOMMANDMGR)
      > kSetAssetAttributesCmdBoss = "" : kAfterDoMessageBoss @ kDocBoss (IID_ICOMMANDMGR)
    > kXMLSetAttributeValueCmdBoss = "Set Attribute Value" : kBeforeDoMessageBoss @ kDocBoss (IID_ICOMMANDMGR)
      > kXMLSetAttributeValueCmdBoss = "Set Attribute Value" : kAfterDoMessageBoss @ kDocBoss (IID_ICOMMANDMGR)
    > kRestoreLinkCmdBoss = "Restore Link" : kAfterDoMessageBoss @ kDocBoss (IID_ICOMMANDMGR)
    Please let me know how to stop XML tag updation (execution of  kXMLSetAttributeValueCmdBoss) at document open.

    Is the first time one of these files crashes always on one system or another, or is it random across systems?
    It is random and it's not related to a file (one time i can open the file andanother time it cause an InDesign crash);
    It sounds very much like a font problem. Are you using a font manager, and if so, which one?
    We have reproduced the problem also on machine with only system's fonts.
    I forgot to say that the crashes happen only with InDesign files with InCopy files linked in.
    Thanks
    Alessandro

  • Condition type value updation using characteristic value in sales order

    Hi Experts,
    We are implementing SAP for one of our Spain client. In that one of the Legal requirements is, whenever they are selling the finished products to domestic customers who contain OIL as one of the component then, some additional cost needs to be calculated and collected from customer and which needs to be paid back to Spain Government every month on Region basis.
           If OIL is not a component to produce the finished product then, not required to charge the customer additionally.
    The OIL content used to produce every finished product will vary based on product characteristic value. Meaning, for some finished product the OIL used will be 2.2 KG and for some products it will be 3.5, 4.3 KG and etc.
    Since various combinations of products are available for the client, during sales order creation we are planning to update some special characteristic which the data flow from u201CVariant Tableu201D. In the variant table we are going to maintain the OIL Quantity required making finished product.
    But we are not sure how to activate a new condition type with the value fetched in the special characteristic. This new condition type needs to be activated based on this characteristic value and multiplied with total order quantity and price to charge from customer.
    Example, the special characteristic fetched the value of 2.2 KG based on variant table. Total Order quantity is 10 PC and charge is 0.06 EURO per KG. in this case, (2.2 x 10 ) x 0.06 EURO = 1.32 EURO
    I need the expert opinion how to activate the new condition type based on characteristic value and achieve the above requirement.
    Thanks in advance.
    Warm Regards,
    VEL

    Hello,
    I have replicated the whole requirememt in IDES and getting the price calculation as needed but the only issue with the Conversion factor for the condition type. Either you need to maintian the conv factor in material master or need to enter manually for the condition type in SO. Some how you have to maintain the conversion factor to calculate the price for the condition type in different unit.
    For easy of understanding Lets make the whole requirement in 2 parts
    Part - 1
    Oil qty calculation. For convenience sake I have taken oil qty also in TO
    1) Created a num char OIL_QTY1 with length 9 and decimal places 5 and UOM as TO
    2) Created Variant table to infer the OIL qty in TO per piece of finished prod ( This oil qty data may be depends on various factors). For certain Finished products the oil qty may be 0 or blank
    3) Created a REF char SO_QTY  to pull the SO qty to configuration and add this char in class 300(Table:VBAP,Field :KWMENG)
    4) Created another char SO_OIL_QTY  (Num with length 9 and decimal places 5 and UOM as TO)
    5) Created a PROCEDURE say PROC_SO_OIL_QTY with code
    *$self.SO_OIL_QTY = $self.OIL_QTY1 * $self.SO_QTY*
    6) Create another PROCEDURE as mentioned earlier with modified code
    $SELF.A_VARCOND = 'TEST_001' if OIL_QTY1 specified,
    $SET_PRICING_FACTOR ($SELF,A_VARCOND,'TEST_001', SO_OIL_QTY)
    Note: Maintain proper seq of the procedures in profile. The Qty cal proc should be before the price related procedures.
    PART-2
    1) For the condition type maintained 60 EUR per TO (0.06 EUR per KG)
    Now if you create SO for the Finished product of 10 PC
    the Char values will be
    OIL_QTY1  = 0.00022 TO (inferred from Variant table th proc)
    SO_QTY    = 10
    SO_OIL_QTY = 0.0022 TO
    Get into conditions tab
    Here Condition type ZSIG will be displayed as error with Amount 60 EUR per TO and condition value will be blank. Just enter value 1 in the col NumC and CCon fields.
    Now the Condition value will appear as 1.32 EUR.
    Hope this gives some more clarity
    Regards
    Brahmaji D

  • Profit center update for stock existed materials!!!

    Dear forum,
    We are in ECC 6 and new GL is activated; now we are planning to implement profit center accounting. While updating the profit center to material master we are getting the error message “You want to change the profit center but material stock still exists”
    It is the standard behavior of the system with stock existed material, but we are not changing the profit center first time we are adding the profit center to material master, we have thousands of materials with stock.
    In this situation what is the best approach to update the profit center to material master?
    Regards,
    Ravi

    Hi...
    Mukthar Ali  suggested two options for you..
    The first Option will not be accepted by PP, MM guys.
    Because they need to perform many tasks, such as creating material master and modifying BOM.
    You will need to review the second option. With FI guys.
    First, you change the message as a warning message in OMT4 for message no. 335.
    Second, you update profit center in material master..
    Third, you manually generate fi document which have inventory adjustment between profit centers.
          dr) Stock-profit center xxx,xxx,xxxx   cr) Stock-space xxx,xxx,xxx

  • OMS2 setting for quantity & Value update.

    Whenever new plant is  created (after go live), we have to do the the Qty & Value update (OMS2)  for that new plant/valuation area for each individual material type.
    While doing this we have select the material type  individually for each material type & then checking the Qty & Update field which takes lot of time.
    I like to understand is there any smart way to update the quantity & value update for all material type in single screen. Currently we have to go to individually for each material type.
    This will save lot of time & Smartness in consultant work.

    Hi,
    Plant is considered as an operating area or a branch or a location within a company which concerning with production facility or branch office or large warehouse storage .
    When a new plant is created – it is always better to check OMS2, OMWD and other related assignment or copy from existing running plant. Also there are other related factors individually involved to plant only for which a new plant is required; all are needs to be attended. So instead of saving time, better check all settings (excise registration, if any) for anew plant to work business effectively.
    Regards,
    Biju K

  • PO with zero value.

    Hi,
    My client requirement is to create a Purchase order with zero price, But as per SAP standard system will not allow to process a PO with net price = 0. How to sort out this scenario.
    Note: Free indicator cannot be used for this scenario for some purpose.
    Pl suggest.
    Regards,
    RitiG

    Hi,
    The scenario where POs are raised for zero value exists in many companies, the items may be free of charge samples or replacements for damaged stock, or simply free gifts.
    As Yogesh corectly pointed out this can be done if the "invoice " indicator is unflagged on the PO item.
    One further comment though, it is up to the person posting the question to decide if it has been fully answered and also it is up to them to decide if they WANT to award points.
    Steve B

  • Is there a way to not include zero values in sums and an average?

    I'm working on a new performace evaluation & would like to sum the score of each line, then get an average of the total scores.
    example:  stength (1 value), Solid Performer (2 value), Performer (3 value), Recommend Development (4 value), N/A (zero value)  then a total score of all the values, not including the zero value. 
    Then an average score of all the scores given.
    Hope this makes sense! 
    Thanks in advance for the input!!!

    If you use the calculation option "The field is the ____ of the following fields:", nulll values and zero values are included as zero and the number of number of items use is the number of fields selected.
    If you want a different calculation, then you will have to write a custom script to sum and count the fields you want to include in the calculation.

  • No Quantity/ value update at Movement type

    Hello All,
    At Material type level with valuation area SAP controls check / uncheck Quantity/ Value updating (OMS2)
    In our specific business scaenraios, we use material type (HALB) with valuation area combination with / without Quanity & Value updating. Hnece, above setting will not work in our scenario.
    is it possible to have control of Quantity/ Value updating by using a custom movement (ex: copy of 101 to 1Z1)?
    Really appreciate your thoughts!
    Thanks
    Siva

    Hii shiva, lots of threads are available regarding this .
    have u gone thru.plz search sdn, u will get good reply.
    quantity and value update
    Quantity update and value update in case of account assignment category
    Material Type that updates Value but no Quantity
    Quantity and value updates for stock.
    quantity/value updation query
    hope u will get sm idea.
    Note : Do not use SMS Speak.Avoid links while answering,try to give your own suggestions.
    Edited by: Jeyakanthan A on Jul 22, 2011 10:25 AM

  • Scales for 0 values

    Hi Folks,
    Greetings !
    Here is my requirement for service conditions;
    for 0-200 calls per month - - free
    from 201-500                       -- @Rs 1.00 per call
    for > 500                                -- @Rs 1.20 per call
    Rental charges                  -- Rs 200 per month..
    I am aware that we need to configure Scales for PRS condition type. But how this scale can be achieved for zero value for 0-200 calls??
    Points for sure!!
    Regards
    Kumar

    Text properties> format >custom > custom format script> place bellow code
    if(event.value <= 0)
        event.value = "";
        event.target.textColor = color.white;
    else
        event.target.textColor = color.black;  

  • Report is showing "null" string for null values.

    hi ,
    I am new to BI Publisher and creating a report in BI Publisher. In the result set for null values, report is printing as "null". I checked the query , it gives blank (empty value) data for null values. But in report it is coming as "null" value (string "null"). I require to show the report as blank data for null values. Can you please help me to find solution for this ?.
    Thank you very much in advance.
    Regards
    Gayathri.

    it shouldnt happen like that
    try these
    <?xdoxslt:ifelse(ADDRESS3!='',ADDRESS3,'')?>
    or
    <?xdoxslt:ifelse(ADDRESS3!='null',ADDRESS3,'')?>
    if those didnt work send me your template and xml to my email i can try that at my side .
    Email [email protected]

Maybe you are looking for