Contact - Account Relationship Mastery in UCM

Hi,
Does any one know if it is possible to link Contacts to Accounts in UCM?
I have populated EIM_UCM_CON.PAR_UCM_ACCNT_UID with EIM_UCM_ORG.UCM_UID, however, when I run the UCM batch job to populate the CRM both the account and contact record get created in CRM but the relationship does not get established. It would be important if any one knows what is a table in UCM that holds account to customer many to many relationship table and related EIM table (i.e. in CRM we have S_PARTY_PER table for the same).
I have managed to link Address to Accounts and Contact using the similar method described above by populating the 'PAR_UCM_XXX_UID' in EIM_UCM_ADRPER table, I am unable to work out why it doenst work for Account and Contacts. Any suggestions are much appreciated.
Thanks in advance
Jigar

Hi,
sorry that I bring this thread up again. But I am at the same point and have the exact problem. Has anyone figured out how to link Contacts to Accounts?
Is is even possible with EIM_UCM_CON or would I have to use EIM_UCM_ORGCHILD?
Is it essential to set a specific xxx_FLG field?
I tried PR_CHILD_FLG, as I also needed it to link addresses to accounts, but didn't work.
Columns populated:
IF_ROW_BATCH_NUM, ROW_ID, UCM_UID, EXT_SYSTEM_NUM, UCM_EXT_ID, IF_ROW_STAT, UCM_TYPE_CD, FIRST_NAME, LAST_NAME, INTEGRATION_ID, PAR_UCM_OBJTYPE_CD, PAR_UCM_ACCNT_UID, PR_CHILD_FLG
Thanks for your help,
Sebastian

Similar Messages

Clientbased Outlook-Integration: Import Contacts/Accounts from CRM to Outlo

Hi,
I set up the clientbased Outlook-Integration von CRM 2007. Everything works fine besides the synchronization of Contacts/Accounts from CRM to Outlook.
What are the requirements for a contact to be imported to Outlook?
Can anybody help?
Thanks in advance,
Ben.

Ben,
the standard relationship for this is BUR011. we have given a customizing under SPRO where you can maintain that.
Once that is done the contacts where the logged-in employee is correctly assigned to would go to the outlook folder.
if that does not work pls send me an e-mail and we can check your system remotely
martin

How can I remove my company's iCloud Contacts account from a former employee's iPhone and have the current information removed as well?

How can I remove my company’s iCloud Contacts account from a former employee's iPhone and have the current information removed from their iPhone at the same time as well? Will just changing the iCloud password be enough? Our company shares an iCloud account for convenience but when someone leaves we don't want the information to stay on their iPhone.

Changing the password would only block them from accessing the iCloud information. They would still have access to the local copy on thier phone. To delete the local information, you would need to go to Settings>iCloud on the phone, tap Delete Account, then choose Delete from My iPhone. (This only deletes the iCloud account and data from the phone, not from iCloud.) This, obviously, must be done during the exit process as it requires access to the phone.

Two iPhones, but iTunes makes me use one Yahoo 'contact' account

I have two iPhones. I use iTunes through a single Windows user account. iTunes lets me have separate sync configurations, e.g. different playlists, different picture options, for most sync options, but it is not allowing me to define separate accounts when syncing contacts. I'm trying to sync Yahoo! contacts. The sync part works fine, but I need to have different accounts configured for each iPhone. When I 'configure' the contacts account information for one iPhone, the contacts account information is changed for the other iPhone.
Is this a bug? Does someone know how to fix this issue? Please don't tell me to use another Windows user account for the second phone. There's no rhyme or reason why all the sync options but this one are per iPhone, and this one isn't.

Suppose I authorize another computer to use my current iPhone 5 and sync apps to that computer. Then I get my iPhone 6 and sync my apps to this new phone. Then I change the apple ID on one of the two computers. Would leave the installed apps on both devices? I don't have the new iPhone yet as I'm waiting to get an unlocked GSM version directly from Apple so I can't try this right away.

Contact Person Relationship not displaying in webUI

Hi,
I am facing an issue while creating the Contact Person relationship in webUI. It is displaying in back end (GUI) drop down box, but its not displaying in web UI dropdown box. All other relationships are displaying well in UI.Please suggest to overcome this.
Bob

HI! Bob,
I am in a fix, actually i cant upgrade to sp004(presently in sp002) because it probably would also affect compatibility with other servers as i am using NWDI TREX IPC, so it is not posible for me to upgrade to SP004............
I am still looking forward if you can provide me any help in
If you require to see also contact person-relationships
in "Relationships", you need to eliminate the filtering in BOL
(class CL_BUPA_IL_RELATION->FILTER_RELATIONSHIPS). By creating a new
implementation class (i.e. ZL_BUPA_IL_RELATION with superclass
CL_BUPA_IL_RELATION) and entering this class in viewcluster
CRMVC_BUIL for external object BuilRelationship), you can redefine
method FILTER_RELATIONSHIPS and implement logic according to your needs
I am not able to apply the above solution, as FILTER_RELATIONSHIPS is a private method of the class CL_BUPA_IL_RELATION so how can i redefine it.
Please help me out.............
Thanks a ton
Mayank

Account Relationships. Is it possible to do bulk imports?

Hi,
I would like to know if it´s possible to import csv files with information about Account Relationships. I need to create different types of accounts and then I need to import relationship between them (For instance: Company A will be a Suplier of CompanyB or CompanyB will be a customer of CompanyC).
Is there any way to do bulk imports with this type of information?
Also, what about reporting, is it possible to do reports or extractions of data to obtain this info?
Thanks in advance

Hi Antonio_A,
Just in case you are looking for an alternative to CSV upload, you can actually perform the imports of Account Relationships via Web Services.

Contact Person Relationship to SP.

Hi Experts,
I am faced up with a situation; where if am removing a Contact Person relationship for a Sold to Party; the relationship to the another contact person gets deleted. Possible reason could be both the contact person are identical.
Now, how can i identify whether both the Cont. Person are identical or not; even though GUID for both is different. Is there any field value that makes them identical.

Hi,
I have gone through your query. The question here is bit misleading. You have mentioned that when you delete the contact person relationship of a Sold to party, relationship to another contact person is deleted. No two contact persons can be identical in the system. Whenever you create a new BP in the CRM system, every one are unique in its own way with a New GUID and New BP number assigned to them.
Even though they can remain as duplicate, but 2 contact persons cannot be identical which will lead to a scenario like you have mentioned here. In my opinion this cannot occur. If you elaborate further i can help you out.
I hope this helps.
Regards,
Venkat

Relationship Type field in Contact Person Relationship Web Ui

Hi
In SAP CRM we can differentiate a relationship using relationship type. This field is available in SAP GUI, in "Contact Person Relationship" category, whereas it is not present in Web UI screen for contact. In our project there is requirement to make it visible in UI also. Please help me in this regards.
Thanks & Regards
Hitsm

Hi Hitesh,
Since Contact Person is a very common relationship, it has been removed from the relationship type and has moved into an assignment block. Invariably whosoever is a contact person will come under that assignment block.
Regards,
Harshit

How to uncheck Send Notification check box by custom script in supplier's contact Account management tab?

Hi Experts,
We have a requirement to uncheck the Send Notification check box by custom script in supplier's contact account mangement tab while page loading while creating new contact for the supplier. I have attached screen shot for reference.
I have searched several API Java classe for get and set methods for this Send notification field but no luck.
If anyone have an idea about get and set methods for this field please share.
Help would be appreciated and points awarded!
Thanks,
Lava.

Hi Lava,
Inorder to uncheck the Send Notification checkbox while loading the page you have to write the script targeting the class Contact(600) and target as Loaded.
Include below lines in your custom script (contact onload Script)
doc.getFieldMetadata("SEND_NOTIFICATION").set(doc,FALSE);
You can create it in On create Script also.
Hope it helps.
Thanks,
Raj.

How I can contact Account Security Advisor know that you contacted iTunes Store Support to let them know that I contacted iTunes Store Support by email

HowI can contact Account Security Advisor know that you contacted iTunes Store Support to let them know that I contacted iTunes Store Support by email ?

The case number that you were provided, which is linked to either your device or your contact information (like your email address), is how Apple Advisors keep track of your contact with their departments. When they bring up either the case number or your contact information, all of that is supposed to be linked together.

Coying contact between 2 contact account on iPhone

HI
I have two contacts lists on my iPhone (2 different contact accounts)
I would like to know how to copy one contact from on acoount to the other one (From my exchange contact list to my ME on, or inverse)
thank you for help

Not possible.
Exchange business contacts synced over the air and MobileMe personal contacts synced over the air are kept separate by design. Most companies that provide an Exchange account want/prefer it this way. You can't sync Exchange business contacts synced over the air direct with a supported application on your computer via the iTunes sync process either.
You can manually copy contact info for a contact with one to the other.

Validity range of contact person relationship BUR001 not changeable?

Hi guys,
Apparently it is not possible to change the validity range (Valid from and Valid to) of the BUR001 relationship.
The suggested workaround is a Z-copy of the BUR001 in which it is possible to change the validity range settings. The problem with this 'solution' is the huge amount of partner determination which takes place on several placed within the system (e.g. partner determination procedures on activities, search functionality etc).
What is the best way to use contact person relationships which can have a validity range?
We are on a CRM7.0 system.
All suggestions are highly appreciated!

The answer to the above question:
In CRM7.0 a flag is added to activate the time dependency on the BUR001 relationship:
CRM_BUT050 Time Dependency: Contact Person Relationship
This can be activated via the following path:
Cross-application Components --> SAP Business Partner --> Activation

Customer account relationship to Active

Hi,
we are facing issue when the calling this api for the update the customer account relationship to Active. We passed the CUST_ACCOUNT_ID, RELATED_CUST_ACCOUNT_ID and status = 'A' .
HZ_CUST_ACCOUNT_V2PUB.update_cust_acct_relate(
p_init_msg_list => p_init_msg_list
, p_cust_acct_relate_rec => p_cust_acct_relate_rec
, p_object_version_number => p_object_version_number
, x_return_status => p_return_status
, x_msg_count => p_msg_count
, x_msg_data => p_msg_data);
after calling this , we getting bellow error.
ERROR "SID:18697443 There are no active customer account relationships between accounts 131587603 and 131574889."
Please advice

If the relationship already exists, in my opinion, you should be passing cust_acct_relate_id too in the p_cust_acct_relate_rec.
HTH,
Alka

Collection contact persons relationship in FSCM

Hi All,
Request your help in creation of Collection contact persons relationship in FSCM and find them in process receivables screen.
We are not mantaining customer contacts in customer master. But only in FSCM
What is the use of collection contact person if they donot show up in process receivables screen?..Please help. i want collection contact person to show up in "Get contact Person" list in process receivables.
Thanks - Donny

Donnesh,
If you dont record the contact person in the customer/ BP then it needs to be stored somewhere for it to be defaulted.
The only way to do this is to add the name once in the process receivables screen and it will then stay there and also be copied through in to the create customer contact screen.
You could look for a BAPI to load the name and number into the process receivables screen, but this would mean processing the customer via the worklist.

BP relationship: validity period for contact person relationship

Hi all,
In CRM 4:
I wish that the Rel category "has contact person" (BUR001) will have from...to-date (validity period).
But even though view BUB020 is listed in the views of this category in Tx BUBA - the fields from...to...are not active when I create new contact person relationship in Tx BP.
what is the problem?
Thanks,

Hi,
Please go to transaction BUBN and in that one field group would be there called 'Relationship Category/Role Definition Category'.
Select that and go to "Field Group--> Fields" and add the following two fields:
Table                        FieldName
BUS050DFLD           DATE_FROM_STR
BUS050DFLD           DATE_TO_STR
Dont check any of the check boxes like "input field" and "not a required field".
Save it and come out and then again launch BP trx to get the desired result.
This is how i solved my problem in CRM 4.0.
Please let me know if you have problems.
Regards
Sidd

Contact - Account Relationship Mastery in UCM

Similar Messages

Maybe you are looking for