Contact addresses not showing up after upgrading to ios 7

Contact addresses not showing up after upgrading to ios 7

Contact addresses not showing up after upgrading to ios 7

Similar Messages

  • Contact list not showing up after upgrade to iOS5

    Just upgraded to iOS5 now my contact list is blank but the contacts still show up on incoming calls and text messages. I have the iPhone4 and yes I have reset the phone. Any clue how to get them to list again in the contact area? Thanks for any help!

    My contacts were still in place after upgrading to 5, but I could not get into them.  Clicking on a name would just freeze the Address Book.   Some other thread here suggested the "soft reset", holding down the Home and Power buttons at the same time and power cycling the phone.   That solved the problem for me. 

  • Siri not showing up after upgrade to IOS 6

    I have an IPAD 3. I updated to IOS last night. But I am not seeing Siri anywhere. Even Settings>General>Siri is not showing. I am wondering if I made an error in installing as another Ipad is showing Siri correctly. How do I fix this?

    Rang Apple support. They asked me to do a full restore. After an hour of effort, it promptly restored my backed up settings without giving a chance to choose SIRI again. I could have set-it up as a new Ipad but then all my data would have been lost.
    Think this is a bug. Hope Apple fix is sometime soon.

  • HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

    My iphone 5 does not ring anymore after upgrading to ios 7.0.2.  It did not happen right away, but maybe 2 weeks ago.  I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in.  I also turned my phone off and it still only vibrates when calls and messages come in.

    I found another feed and said there is a silent button next to volume bar.  That was the problem.

  • IPhone 5s not receiving iMessages after upgrading to iOS 8

    After upgrading to iOS 8 my iPhone 5s is not receiving iMessages from the rest of the family. My phone shows up green instead of blue on the other phones. I have tried all kinds of resets, turning off/on iMessages, etc. Nothing has worked so far. Any suggestions will be appreciated.

    Hi there eyab2010,
    I have an article for you that outlines some troubleshooting steps related to this issue with Messages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Anyone else having volume icon on ipod touch 4gen just popping up and not working properly after upgrading to ios 6.1?

    Hi, has anyone experienced issues with there volume control icon randomly popping up after upgrading to ios 6.1 from 6.0 .
    I have a 4th gen ipod touch which  until upgrading to 6.1 from 6.0 was working perfectly.
    Minutes after the upgrade I noticed the volume icon just popping up for no reason. I can turn the volume up now, but not down and it randomly appears on screen without anyone touching it. Weird!  Can someone shed some light on this issue,I have reset and reloaded to factory several times now to no avail.
    thanks!

    I am having this same issue on my iPhone 4. The most recent update to iOS 6.1 didn't fix it either. Has anyone found a fix for this problem? It doesn't happen often, maybe every third day or so but requires power off, power on to bring the sound back. 

  • I5 can not connect wifi after upgraded to IOS 6.1.2

    i5 can not connect to my laptop share-wifi after upgraded to IOS 6.1.2, while it's ok before upgrade. How can I solve it?

    FIXED!!!!
    I have iPhone 4s running 6.1.2 Everything worked great before the lovely update. My wifi did the same thing that everyone else's seems to be doing. It would not recognize my home router.
    Evidently, in the update, Apple changed how the "Ask to Join Networks" button operates. Previously, I didn't have to have the button toggled to on, my phone would just automatically lock onto my router. I have fought and fought with this update. I have done several "network settings resets". I have even restored my phone twice. I have tried every crackpot, and not so crackpot, suggestion on these forums and NOTHING has worked. I could go to settings and connect to the router each time I used the phone, but it would only stay connected for a few minutes.
    Today, I toggled the "Ask to Join Networks" button to "on", then opened Safari. My phone then asked if I wanted to join the network, I responded with "join". My phone has been on wifi all day! I left home and came back several hours later, and FINALLY... my phone locks on automatically.
    Go to settings>, Wi-Fi>, toggle "Ask to Join Networks" button to "on". Then click on your router/network in the list.
    I realize that everyone's problems are not the exact problems I had, but maybe this will help some of you having problems.
    Good Luck!

  • IPhone 4 does not catch signals after upgrading to iOS 7

    I am a iPhone 4 user. It does not catch proper signal strength in home after upgrading to iOS 7 whereas it does catch it on the outside. It worked perfectly with previous iOS versions. Please help me out.

    Does anyone have any solution???
    Reply ASAP...
    My iPhone has turned into an iPod since l upgraded...

  • Texts are not showing up after upgrading to version 11

    Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
    Before (version 10.3.183.7...)
    After (version 11.0.1.152...)
    The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
    Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
    You will see the changes with Flash player version 11, and everything working fine with older versions.
    I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

    This is a known issue and we have a fix for this in our next release. Thanks for posting.

  • Mail.app time machine backup not showing anything after upgrade.

    Hi,
    I have gone from Snow Leopard to Mountain Lion, and I have a concern that my Time Machine backup now does not show any of my emails since the upgrade.
    Is this by design or has something more sinister occured?
    Gavin.

    Hi,
    No, thats the point the only email visible is from after the upgrade a week ago.
    My emails on this computer go back over a year, but I cannot seem to see them.
    Gavin.

  • External drive does not show up after upgrade to 10.8.3

    My external drive that has my Time Machine files do not show up on the display after I upgraded to 10.8.3

    This did not work.  I finally reinstalled OS X.  Now some drives will show up.  I still have oe that will not.  I have two laptops and all of the drives show up on the other machine.  My last problem drive is a seagate 1tb. 
    Right now I have too much other stuff going on to worry about this so I have put it on the back burner.
    sig thanks for trying to help. 

  • Contacts address not showing on pad

    When I add the following address (not mine) :
    5 Disa Hill Close
    Knysna
    WC
    South Africa
    and click on it, the map app launches, but dpit finds the wrong address ...it gives 2 suggestions, but they are both incorrect.
    If I click cancel, and immediately click 'search' on the search bar, the address is found every time.
    I trust this is enough information for you to replicate my problem and to assist in the solving it.
    Many thank,
    Sprogget

    thanks, you solved myproblem.  i looked in utilities and there it was.  what a strange place to put it

  • SXMB_MONI does not show payload after upgrade to SP15

    Hi there,
    We have installed SP15 in our system, everything seems to be working OK with exception of the SXMB_MONI which now does not show the Payload in the SOAP output/response.
    Does anyone know if this is a know bug/functionality of SP15?
    Thanks,
    Roberto

    The other OSS note:
    SAP Note Number: 917885
    XI: Attachments werden im Message-Monitoring nicht angezeigt
    Version: 1, Note Language: EN, Released on: 01/27/2006 
    Symptom
    An XML message contains attachments with mime types different from application/xml. When clicking on the attachments in Message-Monitoring for that message, the attachments cannot be displayed!
    Error message is: "Format of the document cannot be displayed"
    Other terms
    SXI_MONITOR, SXMB_MONI, Runtime Workbench, XI, RWB, Message Display Tool, MDT
    Reason and Prerequisites
    Before displaying an attachment, Message Monitoring checks the mime type of the message with a list of supported types. Since there are several mime types for some applications, like powerpoint or excel, the check is not exhaustive.
    Solution
    The attached correction instruction adds additional mimetypes for powerpoint, excel, and word. The patch is included in SP17 for NW04 and SP7 for NW04s.
    Actually both of these notes don't exactly indicate that the issue will be fixed in terms of the payload.  We are going to apply it and see if it fixes the issue.  I will update this forum when i try it out.
    Regards,
    Jay

  • IPhone 4s will not back up after upgrading to IOS 8.1

    My phone is supposed to be backing up automatically, but I keep receiving a message saying that I have not backed up in over 4 weeks.
    Each time I try backing up manually, the screen pops up asking for my ICloud ID and password, I enter that, then it looks like it starting the backup, but then the screen pops back up asking me to sign in again.  It seems to be in a virtual loop that will not allow my phone to complete the backup.

    Hello Brenden,
    I followed all the troubleshooting tips.  Everything is set properly, so my phone should be backing up automatically, but is not.
    When I try to back up manually, it will start, then a pop up asks for my ICloud Password (again! which it already did), I enter the password and it returns me back to the screen that gives me the option to back up manually.  The message at the bottom say "Last Backup could not be completed".
    I keep going through the same motions over and over and over again with no results.
    I am in a perpetual loop with this and the phone will not back up, either automatically or manually.
    -My device is connected to a power source (the computer)
    -The device is connected to the internet (my home Wi-Fi)
    -The device screen is locked
    Is there a way to go back and down load IS 06?  I did not have these problems until I upgraded to IOS 8.0, then 8.1.
    I thought the bugs were FIXED!
    As you can tell, I am quite frustrated with this problem and am concerned that I am unable to back up my phone.
    Can someone please help!
    Thank you,
    Cweiss2

  • Camera lock screen iPhone 5 not working properly after upgrade to iOS 8

    After I installed iOS 8 on the iPhones 5 of my and my wife's the camera on the lock screen isn't working properly anymore. When I swipe up, the camera starts but the screen turns black within less then a second.
    On the iPad 2 and the iPad Air (both upgraded to iOS 8) I don't have this problem. It seems to be iPhone 5 specific.
    Has anyone else experienced this problem?

    Having the same problem.  I'm on an iPhone 5 and I have updated to 8.0.2.  When I go to apps directly from the lock screen (timer, calculator, camera) it opens up then immediately turns into a black screen.  It appears that removing my passcode fixes this bug, but I can't have an unsecured phone.  Please help Apple!

Maybe you are looking for