Contact Apple Support Welcome back. Do you need help with the same topic?

Hello I've got a problem in the security questions I do not know whether there are alternative email how to restore security questions and alternate email.
Thank you
<E-mail Edited by Host>

You are not talking to Apple support by posting here. This is a public user to user technical support forum and you should not post personal information on here.
If you want help, then go and contact Apple support and NOT a technical support forum.

Similar Messages

HT5312 i need help with the security questions is there some way to get you to remind me what they were from e-mail or other wise

I need help with the security Questions is there some way to get you to remember them by e-mail of other wise

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

I need help with the iPad Remote app to connect to apple TV 2

I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something

Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
 Cheers, Tom

Why contacts birthdays are being showed in iCloud calendar all with the same age (11 years)??

Why contacts birthdays are being showed in iCloud calender all with the same age (11 years) ?? There is a solution to solve this problem ??
Thank-you

I cannot agree more with your comments! What a way to frustrate your customers!
I have been having an issue with iCloud on Mac where it kept asking me for my password and sometimes would, sometimes would not continue to access my iCloud mail. Today it just refused to connect to iCloud mail.
I looked in the Mail, Contacts and Calendars in my MacBook Pro settings and discovered that 2 iCloud accounts were present. One with my original Apple ID (a gmail address) and a second with my new iCloud email ( an @me.com address). Having deleted the second account, using the new @me.com address everything is working fine.
So from my viewpoint when I moved over to iCloud I was asked to sign in with my Apple ID (the gmail address) then to create an @me.com address. However, as far as I can see all sign ins to the new @me.com account on Macbook, iPhone and iPad need to be done through the old Apple ID (the gmail address). Is that confusing and just plain crazy???
Further, after creating the new @me.com address I soon found out that this is apparently now forever bound to my old Apple ID and cannot be changed. I mean why can't I delete the iCloud account and start anew with a different @me.com address??? Also, as everybody using iCloud must create an @me.com address why on earth can I not get rid of my old gmail address and have my entire Apple ID accessed through the new @me.com address? Creating a whole new Apple ID will not solve this as we are unable to transfer purchases between accounts.
Apple products are great IMHO, but they do seem to not think things through in a very big way sometimes......

HT4528 Hi I need help with the volume on my phone even on speaker i can barely hear who I am speaking with

Hi I need help with the volume on my phone, even on speaker I can barely hear who I am speaking with . How do I make it louder /

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W.

I need help with the Web Application Certificate

Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
3. Getting Your Certificate Officially Signed
C. Select the self-signed certificate, then click File > Certification Request > Import CA Reply.
I can get the certificate in to the Filr appliance but from there I'm stuck.
Any help much appreciated.

Originally Posted by bentinker
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
ok when you have you self signed certificate and you requested an official certificate with the corresponding CSR then you just need to go back to the digital certificates console. To import the official certificate, select the self signed certificate, then click File > Certification Request > Import CA Reply. Then a new windows pops out to select the certificate from your trusted authority from your local hard disk. Find the file (.cer worked for me) and click ok. As soon as you do this in the digital certificates console the self signed certificate will change the information that now it is officially signed. Look at the second column and you should see the name of your trusted authority under "issue from"
I personally had a lot of issues across all platforms. Especially Firefox and Chrome for android. Needed to pack all the root cert, intermediate cert and signed cert into one file and import as CA reply. Not even sure if this is correct now. But at least it works.

I need help with the videos

Yea for the videos, I want to put some Red vs Blue videos on there. And so dar the only way that I see how to put them on there is to buy quicktime 7 pro. Cause it says you have to export them into Itunes. Is there any other way to do it because when I try to update my ipod with the Red vs Blue videos on my library list. It says," Some of the videos in your iTunes library, including the video [video name here], were not copied to the iPod [name of your ipod here] because they cannot be played on this iPod" It confused me when I have the fifth generation iPod.

Voden,
A quick search would have answered your question, as it gets asked about a dozen times a day.
Anyway, the iPod only supports 2 codecs for video, MPEG4 and H.264. On top of that, it needs to conform to the pixel dimensions and bitrate that the iPod will support as well.
Since you're on Windows, you can use Videora iPod Convertor to convert the videos to the correct format.
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: Videora iPod Convertor Guide
If you have questions: Videora iPod Convertor Frequently Asked Questions
If you have more questions, post them here: Videora iPod Convertor Forum
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.

I need help with the conditional build tag option RoboHelp 10

I need help with the conditional build tag option. I want to apply CBT to content in a topic. I looked at the Help topics and believed that I applied the feature correctly. Howver, it is not working as desired. In the 2nd sentence below I want the text highlighted in blue to only appear for the printed output and the text printed in purple to only appear for the .htm /online output. Please help.
There are common tasks used to manage the folders in the Navigator and the folders
in the BBS Folders Viewer Grid. For more information on these common tasks see Help
and Support in Success Enterprise. click the links below.

Hi there
Using tagging is a two part process.
Part One
You create and apply the tags to the information you wish to control.
Part Two
You create a Build Expression that is used when you generate your output. The Build Expression typically reads something like: NOT Tag1 (or whatever your tag name is)
Then when you generate and use the Build Expression, the information tagged is not included in the build.
Cheers... Rick

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

Need help with the session state value items.

I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?

You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM

Need Help with the Clone Tool

I need help with the clone tool, in that when I clone (let's say grass as example), the new cloned area does NOT come out as sharp as the area selected. It comes out much softer and somewhat blurred. I have the opacity and flow both set at 100%. This is very frustrating since I can not get a true clone.

what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
-janelle

I need help with the Quote applet.

Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param      name="bgcolor"      value="ffffff">
<param      name="bheight"      value="10">
<param      name="bwidth"      value="10">
<param      name="delay"      value="1000">
<param      name="fontname"      value="TimesRoman">
<param      name="fontsize"      value="14">
<param      name="link"      value="http://java.sun.com/events/jibe/index.html">
<param      name="number"      value="3">
<param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param      name="space"      value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan Pinno

JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

I need Help with the dynamic link feature in CS3

Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
Many thanks again guys.
Date: Tue, 24 Nov 2009 19:32:47 -0700
From: [email protected]
To: [email protected]
Subject: I need Help with the dynamic link feature in CS3
Harm is correct. For SD DVD, exporting as a DV AVI file from Pr will give you good results. Encore's Automatic Transcoding will give you maximum quality for the available disc space.
-Jeff
>

I am needing help with the final steps in restoring my iPod Touch 5

I need help with the final steps in restoring my iPod

I was told that the iPod would automatically go to restore mode when connected to wifi. It did not do that

Contact Apple Support Welcome back. Do you need help with the same topic?

Similar Messages

Maybe you are looking for