Contact bug : contact phone numbers in edit mode are not shown in "dial" mode
Contacts can have seemingly unlimited phone numbers as seen in the contact edit mode, though very few are shown in the corresponding non-edit mode. Of course, Dialing is not supported in the edit mode.
I have found that contacts that include pause characters or block characters are not properly displayed in the contact "dial mode". If you every try a conference call service, this is important to you.
At&t uses the comma as a pause, and Verizon uses the letter "t" as a pause. *82 temporarily blocks your caller id. Somehow the WebOS software that chooses which items to allow me to dial has bugs and worse, there is no clear way to prioritize so I am completely at the whim of the software.
I have tested entering 12 phone numbers on my own Pre Plus and all the numbers display in the normal contact field. How many phone numbers are you trying to to display?
The dialing options on the Palm Pre Plus are as follows:
To insert a two-second pause in the dialing sequence, enter a T where you want the pause to appear. To add a + symbol in the dialing sequence for international dialing, press and hold 0 (zero) in the location where you want the + symbol to appear. To insert a stop in the dialing sequence, enter a P where you want the stop to appear; to dial the next set of numbers after the stop, tap the screen.
As far as 3rd party special dialing character entry you would need to check with the 3rd party on how to enter this information into you device for your conference calling service.
Similar Messages
-
LR 4 edit Camera-RAW-Image in PS CS 6 - edited photos are not shown in LR
Platform Win 7 SP1 64 bit german, LR 4.1 german, PS CS6 german with Camera RAW 7.1, catalog with 66800 images
When I select a RAW-Image and select edit in PS CS 6 the image is opened in photoshop and everythings seems to work find. But after saving the image (as tiff, using default settings) nothing habens in LR - the image is not imported into the catalog.
When trying to sync the folder manually, the first dialog shows that one image (this image) will be added, but then an error message is shown that no image has been imported.
This is a problem with my big main catalog which has been migrated from LR 3, but it works fine when creating a new catalog.
Also importing the existing huge catalog into a new catalog did not solve the problem (but the images edited within the old catalog were shown).
So it seems that LR does only a partial "import" when editing images in CS6.
Any hints to solve the problem are welcome
Thanks, ChristianSome further reflection on this issue.
If "sync folder" shows the edited TIFF in the filesystem but is then not importing anything, one explanation may be: this image IS already in the Catalog; but Lightroom's current view has filtered it out so it is not displayed.
This might not be the case - and I hesitate to suggest the too-obvious (though the too-obvious is often what trips us up , even the most experienced). But it does at least fit with having the problem in one Catalog but not in another... if one Catalog happens to be set to show its images in some selective way which excludes these image versions.
Library screen / Catalog panel / "all photographs"; then Grid view / Filter bar / "None"; then Photo menu / Stacking / "expand all stacks"; then View menu / Sort / "Capture time" (or the same operations done another way) should either eliminate, or confirm. You should then see each and any edit version that is present, right next to its related original.
It may be that the Catalog, and its contents, are fine. -
Hi
Iam New in SAP xMII. I created newly one Query Templates using TAGQuery. When i select the Data Source, it will shows the Servers details like Simulator(Simulation Server) in the server column but in the Modes column only iam getting "No Data Avilable", the default modes are not displaying in the modes column.
What is the problem actually i did ? How can i get the default modes ?
Can i have create new modes in these servers (Simulator, SQL , Aggregate, Alaram) ?
Anybody can give me the solutions for this.
Regards
Prakash TPrakash
First of all, in the Query Template Editor (if u hv not already <b>SELECT</b> the server name from the list) just simply click on the server name available in Servers' list, then u'll get the list of modes for the server
if still not shows, then
in the xMII Menu, check the Roles assigned to the server 'Simulator'. It can be checked from the option <b>Data Access</b> under the tab <b>Security Services</b> in the xMII Menu. Be sure if this server is assigned with Everyone, Administrator. if not, then assign those roles to that server.
Then also check the configuration of that server 'Simulator' specially whether or not it is enabled. this can be done from the option <b>Data Servers</b> under the tab <b>Data Services</b> in the xMII Menu.
Regards
Som -
I updated my iphone 4 and my daughter's iphone 4s. It's a family share plan - same bill, different phone numbers. My texts are showing up on her phone, and vise versa. Only to contacts that we both have - ex. my mother I'm sure I've done something wrong in the icloud share ........help.
ON either device go to settings - message - send&receive - either uncheck or remove the apple id.
-
Contact issue w/ phone numbers
I have a user that is syncing her iPhone with her Enterprise Exchange account (Exchange Server 2010). For some reason some of her contacts are missing phone numbers. They show up in her Outlook 2010 just fine but not on her phone. She can manually input the numbers on the phone but this becomes a pain when she sync's several thousand contacts.
Any ideas/help as to why this is happening would be great. Thanks.Hi,
yes, I have a contact with several phone numbers (home, office, mobile...) .
When I want to call him,
I select the entry from the contacts list and
press e.g. the green dialing button.
Now I would expect that the 3 numbers of the contact will be displayed and I have to select one of them.
But the phone starts dialing with the first number from the contact.
I found a way to select the right number:
Select the entry
press "options"
press "show details"
select the right number
press the green button
But if this is the way to handle it, it is not very user friendly.
Thanks for a reply.
Roland -
Does anyone know how to recover contacts that have been gone missing or have been deleted somehow. The contacts that are missing are the ones where I only had phone numbers (no email address). The ones where I have both phone numbers and email addresses are ok. They are the same ones I have on my laptop. I dont know what I did to cause the ones with phone number only to disappear.
Good Afternoon irish357,
I know the importance of saving and updating your contacts. What type of phone do you have? If you are using Backup Assistant, you have the ability to sync the contacts between your laptop and phone. You will also be able to see if all your contacts are stored on the online portion of the application versus the phone itself. The contacts should be the same for both online and the phone.
I have attached a link below for your reference.
http://bit.ly/rKiyOf
I hope this information is helpful in resolving your concerns.
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
I just purchased an iPhone 5 and my phone has many duplicate contacts on it. I want to edit my contact list that's saved on the cloud and then replace the contacts on my phone with the edited list. I have spent hours but no success yet.
Okay
So when you edit in iCloud you are not seeing an update on your iphone?. I just did a test in iCloud.com and it changed my iPhone contact list in less than 1 second. So iCloud is functioning fine.
If you delete all the contacts on your iPhone and if you are properly synced they will all be wiped out on iCloud.....ugh! So let's not do that...
Your plan should be to make all the changes in iCloud and have them flow down to your iPhone. That sounds what you are trying to do anyway.
So. if you delete a contact in iCloud or edit a contact in iCloud then you are not seeing the changes on your iPhone?
If so then they are not properly synced..... but I wonder how you have any contacts in iCloud.
Let me know if you are seeing any changes, if mot then we can review the syncing set-up.
Cheers -
HT4906 When I synched my phone to the iCloud, I lost my contact list and phone numbers.
When I synched my 3G phone to upgrade the operating system and to join i cloud, I lost my contact list and phone numbers
How can I get the list and phone numbers back???
allen8844If they aren't in your contacts on icloud.com when you check from your computer, you would have to restore them from a backup source.
-
Ok I’m completely lost here....
I’m running Microsoft Windows XP Home Edition Service Pack 3 (Build 2600), I updated iTunes to 11.0.2.25 and some other updates for windows last night on my laptop. I try connecting to download the iOS 6.1.2 update for my iPhone 4 and my iPhone 5 via iTunes. I am getting this message for both "iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connection is active and try again." Everything was fine with connecting prior to running these updates because I downloaded the 6.1 update with no problems when it came out.
What I have done so far with which has made no difference:
Checked my internet connection
Changed my internet connection
Signed out of iTunes and then signed back in
Ran diagnostics via iTunes, comes back with: Network interfaces verified- Internet connection failed- Secure link to iTunes store verified
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-02-20 20:40:48.
Disabled firewall, spy sweeper, virus scanner
start>run>cmd> typed "netsh winsock reset"
Rebooted
Checked the parental controls in iTunes
Start>control panel>internet options>connections tab> lan settings> selected the "automatically detect settings"
Deleted iTunes and reinstalled iTunes
When I would "ping gs.apple.com" it would come back with "request timed out" no matter what internet connection I was on, so I went into the hosts file start>my computer>(C:)>WINDOWS>system32>drivers>ect>HOSTS and added "# 127.0.0.1 gs.apple.com". Now it will ping gs.apple.com just fine but still comes up with the "iTunes could not contact the iPhone software update server because you are not connected to the internet" message in iTunes when i try to download the update.
If anyone can come up with any ideas that I haven’t tried, please let me know. This is keeping me back from updating both of my phones along with if anything should ever happen to them; restores as well.im computer is connected i can go to the apple store through itunes but when i plug my phone in i keep getting that alert... i plugged my phone in to update it after the apple loaded the itunes icon and a usb showed up.
-
Hello all, new to the forums.
I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
I've already scanned through numerous websites and forums for help, but none of them worked.
This set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
# Open Internet Options from control panel.
# Click the Connections tab.
# Click the LAN Settings button.
# Select the Automatically detect settings checkbox.
Others include installing IE7, which that didn't work either.
Can anyone help?Here it is:
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
LENOVO 2537FC4
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DB3100363E3C0
Current user is not an administrator.
The current local date and time is 2011-06-16 17:03:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 3100M
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
Description: Intel(R) Centrino(R) Advanced-N 6200 AGN
IP Address: 192.168.0.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Thu Jun 16 16:54:56 2011
Lease Expires: Fri Jun 17 16:54:56 2011
DNS Servers: 192.168.0.1
68.94.156.1
Adapter Name: {610821DE-0532-4C65-839B-B74B65859FBA}
Description: Intel(R) 82577LM Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: Broadband Connection
Connected: No
Online: No
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-16 15:35:33. -
After I update my Iphone to ios5 I have a contact that was messaging me but his messages are not grouped
on my Messages it looks like this
222
Update
Person1
Message me often
Person1
Hey!
Person1 has totally same number but after I restore from backup they are not group togetherYou need to get the owner's manual for your Ford's bluetooth system to see how to put your system into discovery mode for the iPhone as well as the appropriate steps to take.
In addition, you should see if the iPhone is supported. -
Updates to my IPad contacts are not shown on my desktop PC ( I don't have a Mac)
updates to my IPad Contacts are not shown on my desktop PC ( I don't have a mac)
If your iPad is disabled due to misentry of a passcode, you must restore it via recovery mode by following the instructions in http://support.apple.com/kb/HT1212 but f you do not have a computer you can use, you may be able to get help by visiting an Apple store genius bar and see if they will do the restore for you.
-
Will the I Pad 2 connectr to a Samsung TV to play a movie from I Tunes. Samsung sent the following.
Dear Phillip,
Thank you for contacting Samsung Electronics.
We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can connect devices which are DLNA compatible and PC or laptops which are
installed with PC Share manager. If the iPad supports DLNA, you can connec it to the TV and play the files
supported by the TV. The TV supports following file video types : MKV, AVI, MP4, WMV, MPEG, MPG, ASF, 3GP, TS, TP, TRP. If you have any other questions, please feel free to contact us.
Thank you.
Samsung Online Support.
Any help?What method of connection are you trying to use? DLNA looks like a standard for sharing media between devices over your home network, but I'm fairly certain the iPad doesn't support this protocol. Apple sell adaptors to connect your iPad directly to TV using composite or HDMI connectors. I'd be surpsied if your TV won't support either of those.
tt2 -
I have iphone 5 and the latest iO7.1. Since upgrading to IOS7.1 birthdays added to a contact are not shown in calendar anymore. It use to show automatically before. Can anyone help?
Click on calendars at the bottom of the screen. Make sure that birthdays are checked.
We may think we have 1 calendar, but iPhone puts things in different calendars. Sometimes we can somehow lose one. Well not really lost, but somehow it just gets de-selected. So just make sure that all that you want to see are checked.
One cool thing I like about this is that they have added US Holidays which didn't used to be there like on most paper calendars. Nice to have them available now! -
Hello,
I am trying to upgrade my iOS to version 5 but receive the message noted below ("iTunes could not contact the iPhone software update server because you are not connected to the internet"). I click update on iTunes. My internet works fine. Does anyone know what may be causing this error?Try disabling firewall and virus scanning software
Maybe you are looking for
-
Media Keys Not Working - Apple Wireless Keyboard - Snow Leopard 10.6
Hello, I am a new user to this Support Area and i tried calling but as its Christmas Day i cant get through because there closed so i decided to join here. Ok basically my problem is that i have a iMac and i recently installed Snow Leopard and on Chr
-
Why is optimizer different in sql than in pl/sql?
Hello, I am running Oracle database 9i, it is running on an On-Demand hosted server, its purpose is to serve our Oracle Payroll application. I have a certain query, and first tried it as a stand-alone query. It displayed the results almost immediatly
-
How to kill parent and child thread in sequnece
Hello freinds, I have one class FirstClass which creates one thread Pserver and Pserver creates three threads then how to kill parent Pserver and child threads.........
-
hello everyone, I am new to java and learning core java and want to make 'ONLINE JOB PORTAL' project in java. so pls solve my queries 1. what are topics of advance java help in completing this project OR it requires html, dhtml,xml, java script etc.C
-
PowerView - scatter plot with an Equation of the line
Hi guys --here is what I'm trying to accomplish in either powerview or powerpivot : i) a 3d scatterplot, ii) with the axis driven by the data model, iii) with the equation of the line (polynimial, log, power etc) adjusting dynamically. I can find pi