Contact Center anywhere When running the TCPIPBUS in debug mode
hi all,
i am not able to make the outbound call,through cca interface is there any way how i can debug to make the outbound call.
wen i keep th etcpipbus in debug mode "it's not showing any erors "
http://www.onsip.com/onsip-articles/what-is-my-sip-address
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Accepting new connection
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Starting
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - ioctlsocket(FIONBIO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient - setsockopt(SOL_SOCKET, SO_SNDTIMEO) success
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::InsertClient() Complete
14/04/2011 10:56:04.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:04.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:05.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.317 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:08.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.333 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:09.349 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.255 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.270 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:10.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
http://www.onsip.com/onsip-articles/what-is-my-sip-address14/04/2011 10:56:13.270 : 0 : 4036 : CTcpIpBus::Run() Activity
detected
14/04/2011 10:56:15.271 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:15.271 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:17.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:17.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:18.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:23.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:23.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:25.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:26.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:31.005 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:31.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:31.286 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:33.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:34.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:34.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:34.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:39.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:39.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:41.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:42.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
http://www.onsip.com/onsip-articles/what-is-my-sip-address14/04/2011 10:56:47.287 : 0 : 4036 : CTcpIpBus::Run() Activity
detected
14/04/2011 10:56:47.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
http://www.onsip.com/onsip-articles/what-is-my-sip-address14/04/2011 10:56:49.287 : 0 : 4036 : CTcpIpBus::Run() Activity
detected
14/04/2011 10:56:49.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:49.302 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:49.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:49.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:49.318 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:50.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:55.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
14/04/2011 10:56:55.287 : 0 : 4036 : CTcpIpBus::Run() Activity detected
=========== [s: to stop application] ===========
14/04/2011 10:56:55.740 : 0 : 4300 : SignalHandler(): Received signal = 2 ... Stopping the TCPIPBus Service
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 14, id = 32, group = 102,
socket = 932]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 21, id = 7, group = 1, so
cket = 948]--
14/04/2011 10:56:55.787 : 0 : 264 : ExitThread: FileName[S:\development\version8.1.3.0\projects\TCPIPBUS\source\MainProg
.cpp] LineNumber[394]
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 5, id = 10, group = 1, so
cket = 964]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 16, id = 14, group = 1, s
ocket = 980]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 16, id = 38, group = 102,
socket = 996]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 2, id = 27, group = 17454
5677, socket = 1012]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 19, id = 35, group = 102,
socket = 1028]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 26, id = 39, group = 102,
socket = 1048]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 23, id = 37, group = 102,
socket = 1064]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 10, id = 1, group = 17454
5677, socket = 1080]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 23, id = 13, group = 1, s
ocket = 1096]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 97, id = 5, group = 17454
5677, socket = 1112]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 26, id = 15, group = 1, s
ocket = 1128]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 20, id = 12, group = 1, s
ocket = 1144]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 11, id = 33, group = 102,
socket = 1160]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 5, id = 34, group = 102,
socket = 1176]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 21, id = 41, group = 102,
socket = 1192]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 6, id = 3, group = 174545
677, socket = 1224]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 14, id = 8, group = 1, so
cket = 1240]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 20, id = 36, group = 102,
socket = 1256]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 11, id = 9, group = 1, so
cket = 1272]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 19, id = 11, group = 1, s
ocket = 1288]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 101, id = 29, group = 174
545677, socket = 1304]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 98, id = 1302698446, grou
p = 174545677, socket = 1472]--
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.787 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 98, id = 1302698440, grou
p = -174545677, socket = 1488]--
14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Remove client on [type = 12, id = 4232, group = 17
4545677, socket = 1504]--
14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::RemoveClientFromList: Client removed
14/04/2011 10:56:55.803 : 0 : 4036 : CTcpIpBus::Run() Leaving...
14/04/2011 10:56:55.803 : 0 : 4036 : Exit CommunicatorThread: FileName[S:\development\version8.1.3.0\projects\TCPIPBUS\s
ource\MainProg.cpp] LineNumber[168]
14/04/2011 10:56:55.803 : 0 : 5168 : BUS Exit
http://www.onsip.com/onsip-articles/what-is-my-sip-addresshttp://www.onsip.com/onsip-articles/what-is-my-sip-address^Aht
tp://www.onsip.com/onsip-articles/what-is-my-sip-address
Voice stream debugging is done at the call center level.
Set the calls centers to trace level 5.
This will then output all messaging for the voice portion of CCA.
Similar Messages
-
How to run the forms under debug Mode?
Hi,
I run my form under debug mode by introducing a break point on a trigger. But i am receive the following error how to solve this issue.
JVM aborting and followed by the following one.
FRM-92101: There was a failure in the forms server during startup.
This could happend due to invalid configuration.
Please look into the Web-server log files for details.and additional information from Java console.
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
oracle.forms.net.ConnectionException: Forms session <5> aborted: unable to communicate with runtime process.
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)I am running on my standalone machine.
Where and what file i want to look into this to solve this issue.
Good help will be appreciated. Thank in advance.
kanishKanish,
Lets start with a few of the basics, shall we. What JVM are you using (Jinit or Sun JRE and the version)? Based on the error you posted, I can infer that you are using Forms 10.1.2.0? Are you running a custom configuration in the formsweb.cfg and default.env? This could be the cause if you have modified the CLASSPATH setting in the default.env excluding core .jar files.
Typically, the FRM-92101 error is caused by a Java error; either a .jar is not found or invalid or not compatible with JVM, etc.
Have you tried clearing your Java Cache to check for a corrupt .jar?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
How to run labview program in debugging mode in windows 95 version
Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.VijayRespected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay -
Error message when running the FSPCCURR - PS/Fin MultiCurrency Process
error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks. -
Error in the Informatica when running the DAC load( Prebuilt Analytics)
Hi All,
Please help me with the below issue with the informatica i am getting when running the DAC load:
Below are the details:
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST(F0006.MCRP10 AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST(F0006.MCRP08 AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST(F0006.MCRP14 AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST(F0006.MCRP01 AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST(F0006.MCRP15 AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST(F06.MCRP16 AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,---------------------------Table name should be F0006
CAST(F0006.MCRP12 AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST(F0006.MCRP27 AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST(F0006.MCRP03 AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST(F0006.MCRP13 AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST(F0006.MCRP23 AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST(F0006.MCRP21 AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST(F0006.MCRP24 AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST(F0006.MCRP19 AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST(NULL AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST(F0006.MCRP12 AS CHAR(10)) AS STATE_REGION,
CAST(F0006.MCRP04 AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
As mentioned in the SQL the table name should be F0006 instead F06, I have checked the Source Qualifier transformation and below is the SQL issued
SELECT F0006.MCMCU,F0006.MCSTYL,F0006.MCCO,F0006.MCAN8,F0006.MCDL01,F0006.MCRP06,F0006.MCUPMJ,F0006.MCUPMT,F0006.MCUSER,F0101.ABAN8,F0101.ABLNGP, F0101.ABEFTB,F0101.ABUPMJ,F0101.ABUPMT,F0116.ALAN8,F0116.ALEFTB,F0116.ALADD1,F0116.ALADD2,F0116.ALADD3,F0116.ALADD4,
F0116.ALADDZ,F0116.ALCTY1,F0116.ALCOUN,F0116.ALADDS,F0116.ALCTR,F0116.ALUPMJ,F0116.ALUPMT,
CAST($$FLEX_ATTRIB_1_CHAR AS CHAR(10)) AS FLEX_ATTRIB_1_CHAR ,
CAST($$FLEX_ATTRIB_2_CHAR AS CHAR(10)) AS FLEX_ATTRIB_2_CHAR,
CAST($$FLEX_ATTRIB_3_CHAR AS CHAR(10)) AS FLEX_ATTRIB_3_CHAR,
CAST($$FLEX_ATTRIB_4_CHAR AS CHAR(10)) AS FLEX_ATTRIB_4_CHAR,
CAST($$FLEX_ATTRIB_5_CHAR AS CHAR(10)) AS FLEX_ATTRIB_5_CHAR,
CAST($$FLEX_ATTRIB_6_CHAR AS CHAR(10)) AS FLEX_ATTRIB_6_CHAR,
CAST($$FLEX_ATTRIB_7_CHAR AS CHAR(10)) AS FLEX_ATTRIB_7_CHAR,
CAST($$FLEX_ATTRIB_8_CHAR AS CHAR(10)) AS FLEX_ATTRIB_8_CHAR,
CAST($$FLEX_ATTRIB_9_CHAR AS CHAR(10)) AS FLEX_ATTRIB_9_CHAR,
CAST($$FLEX_ATTRIB_10_CHAR AS CHAR(10)) AS FLEX_ATTRIB_10_CHAR,
CAST($$FLEX_ATTRIB_11_CHAR AS CHAR(10)) AS FLEX_ATTRIB_11_CHAR,
CAST($$FLEX_ATTRIB_12_CHAR AS CHAR(10)) AS FLEX_ATTRIB_12_CHAR,
CAST($$FLEX_ATTRIB_13_CHAR AS CHAR(10)) AS FLEX_ATTRIB_13_CHAR,
CAST($$FLEX_ATTRIB_14_CHAR AS CHAR(10)) AS FLEX_ATTRIB_14_CHAR,
CAST($$FLEX_ATTRIB_15_CHAR AS CHAR(10)) AS FLEX_ATTRIB_15_CHAR,
CAST($$FLEX_ATTRIB_16_CHAR AS CHAR(10)) AS FLEX_ATTRIB_16_CHAR,
CAST($$FLEX_ATTRIB_17_CHAR AS CHAR(10)) AS FLEX_ATTRIB_17_CHAR,
CAST($$FLEX_ATTRIB_18_CHAR AS CHAR(10)) AS FLEX_ATTRIB_18_CHAR,
CAST($$FLEX_ATTRIB_19_CHAR AS CHAR(10)) AS FLEX_ATTRIB_19_CHAR,
CAST($$FLEX_ATTRIB_20_CHAR AS CHAR(10)) AS FLEX_ATTRIB_20_CHAR,
CAST($$STATE_REGION AS CHAR(10)) AS STATE_REGION,
CAST($$COUNTRY_REGION AS CHAR(10)) AS COUNTRY_REGION,
'0' AS X_CUSTOM
FROM F0006
LEFT OUTER JOIN F0101 ON
F0101.ABAN8 = F0006.MCAN8
LEFT OUTER JOIN F0116 ON
F0116.ALAN8 = F0006.MCAN8 AND
F0116.ALEFTB=F0101.ABEFTB
The error code and error message in the workflow monitor says:
Message Code: VAR_27028
Message: Use override value [F06.MCRP16] for mapping parameter:[mplt_BC_SDE_JDE_InternalOrganization_BusinessUnits.$$FLEX_ATTRIB_10_CHAR].
Some how it is overridng all the values so please let me know what i can do.
Thanks in AdvanceOracle Support
-
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
Hard drive is missing. I can boot from the cd but when running the disk utility, no hard drive shows up.
This is a problem that suddenly appeared.Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?
I'd ask that on the iPad forum.
-
How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0
Hi,
Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
Regards,
Pawan -
My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.
Core dump when running the Proc Application
I have client that has decided to upgrade from Oracle 10g to Oracle11g version. Presently the client code is compiled with Oracle version 11.1.0.7. We have tuxedo version as 9.0 patch02. When running the ProC application, I am getting the core dump. The stack trace for dump is as follows :-
core 'core' of 7784: bp_Customer -C dom=KenanFX -g 5 -i 225 -u dsesun10 -U /users/denver/pc
ffffffff6e8d9bbc kill (2, ffffffff7ffe002c, 1, ffffffff7de3b9a0, ffffffff7ffe0028, ffffffff7e10b5a0) + 8
ffffffff7d27b1f4 skgesigCrash (ffffffff7ffe09a8, ffffffff7e10a070, 1a0c00, ffffffff7dfdbc40, d60a7c, 1) + 34
ffffffff7d27b81c skgesig_sigactionHandler (ffffffff7d6fb9a0, ffffffff7ffe1800, ffffffff7ffe0990, ffffffff7e10b578, ffffffff7ffe0998, ffffffff7ffe09a8) + dc
ffffffff6e8d62e0 __sighndlr (b, ffffffff7ffe1800, ffffffff7ffe1520, ffffffff7d27b740, 0, a) + c
ffffffff6e8c9e44 call_user_handler (ffffffff75f00200, ffffffff75f00200, ffffffff7ffe1520, 8, 0, 0) + 3e0
ffffffff6e8ca03c sigacthandler (0, ffffffff7ffe1800, ffffffff7ffe1520, ffffffff75f00200, 0, ffffffff6ea3c000) + 54
--- called from signal handler with signal 0 (SIGEXIT) ---
ffffffff7c24bb24 sqlrlc (ffffffff7e0f9fc0, 0, 60, c0, 4, 8) + 4
ffffffff7c253594 sqlbrl (ffffffff7e0f9fc0, 1004bc630, 1004bc658, 1004bc5d0, ffffffff7ffe1b30, 2) + 114
ffffffff7c2745ec sqlhvdsc (1004bc5c0, ffffffff7e0f9fc0, 8, ffffffff7fff27a0, 0, 1d676b0) + ac
ffffffff7c274e68 sqlshv (c, 0, e, 0, f, 1c) + 128
ffffffff7c25bd8c sqlsel (ffffffff7fff27a0, 1002d0850, 1002d0d80, 1, ffffffff7e0f9fc0, ffffffff7dd09d70) + 38c
ffffffff7c24ed18 sqlcmex (1, ffffffff7ffe1e80, 0, c, 1002d0850, 0) + 278
ffffffff7c24f724 sqlcxt (0, ffffffff74fd3800, ffffffff7fff27a0, ffffffff74e5d3e4, 16400, 0) + 44
ffffffff74c65aec selectCMF_XIDDB (788, 16450, 2, ffffffff74fbb978, ffffffff7fff4344, ffffffff7971de60) + f14
ffffffff79f5743c bp_AccountFind (0, 0, 1002b6118, 1002b6118, 1002b6118, 1002b6118) + 137c
000000010001748c commonServiceWrapper (30, 0, 558, 1, 100140428, ffffffff6fa08560) + cac
000000010001d1a4 I_AccountFind (100188220, 12336c, 2e60, 100186b80, ffffffff7fffa440, ffffffff6fa08560) + ec
ffffffff7f25ea34 _tmsvcdsp (100186b80, 0, 1001f7b60, 800, 100186b80, 1400) + 11ac
ffffffff7f28241c _tmrunserver (2bb4, 0, 100186b80, 10017c480, 10017d5a0, 0) + 11ac
ffffffff7f25d47c _tmstartserver (1, 2c00, 100144c90, 800, 10017ebe0, 1001444e0) + 1ac
0000000100014e4c main (1b, ffffffff7fffab18, ffffffff7fffabf8, ffffffff6e84b8e0, ffffffff75b05200, ffffffff75f00200) + 14
0000000100014d9c _start (0, 0, 0, 0, 0, 0) + 17c
Can you please help what is causing problem in the applications. Thanks in advanced.
This forum is about C programming in general, and about using Oracle Studio C in particular.
Your question seems to be about a database application that now crashes when run on an updated version of Oracle database.
You mention "Proc" and ProC". If you are referring to the Pro*C compiler, that would also be a database question, since the Pro*C compiler is not related to Oracle Studio or Oracle Studio C.
You are more likely to find a helpful answer in a database programming forum. Start here:
https://forums.oracle.com/forums/category.jspa?categoryID=18
RE: my input fields does not display when running the page
my input fields does not display when running the page
why is that so?
Hi,
Can you send the HTML code for us?
Afonso
When installing a NI 5112, I get an error message when running the test panel.
I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
Thanks,
Thomas
Hello Thomas,
The error code you are getting is related to the board not recording enough samples in the given time interval. May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
LeeM
AE,
National Instruments
Message Edited by LeeM on 10-31-2006 10:47 AM
Error when running the ant task
Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java] at java.lang.Win32Process.create(Native Method)
[java] at java.lang.Win32Process.<init>(Win32Process.java:66)
[java] at java.lang.Runtime.execInternal(Native Method)
[java] at java.lang.Runtime.exec(Runtime.java:566)
[java] at java.lang.Runtime.exec(Runtime.java:491)
[java] at java.lang.Runtime.exec(Runtime.java:457)
[java] at weblogic.utils.Executable.exec(Executable.java:227)
[java] at weblogic.utils.Executable.exec(Executable.java:156)
[java] at weblogic.utils.Executable.exec(Executable.java:142)
[java] at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java] at weblogic.ejbc20.runBody(ejbc20.java:517)
[java] at weblogic.utils.compiler.T
Hi,
I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
[java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
[java] at java.lang.Win32Process.create(Native Method)
[java] at java.lang.Win32Process.<init>(Win32Process.java:66)
[java] at java.lang.Runtime.execInternal(Native Method)
[java] at java.lang.Runtime.exec(Runtime.java:566)
[java] at java.lang.Runtime.exec(Runtime.java:491)
[java] at java.lang.Runtime.exec(Runtime.java:457)
[java] at weblogic.utils.Executable.exec(Executable.java:227)
[java] at weblogic.utils.Executable.exec(Executable.java:156)
[java] at weblogic.utils.Executable.exec(Executable.java:142)
[java] at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
[java] at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
[java] at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
[java] at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
[java] at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
[java] at weblogic.ejbc20.runBody(ejbc20.java:517)
[java] at weblogic.utils.compiler.T
Error when running the apxldimg.sql to update the images direct from rel3.0
Hi everyone,
I'm new to APEX. I'm upgrading from v3.0 to v3.1. I'm on the post-installation, section on "Updating the Images Directory When Upgrading from Release 3.0", I ran into error below when running the apxldimg.sql script. Has anyone run into the is error before. If yes, how did you fix it?
Directory created.
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
ERROR at line 15:
ORA-06550: line 15, column 36:
PLS-00306: wrong number or types of arguments in call to 'XMLTYPE'
ORA-06550: line 15, column 25:
PL/SQL: Item ignored
ORA-06550: line 38, column 15:
PLS-00302: component 'EXISTSRESOURCE' must be declared
ORA-06550: line 38, column 3:
PL/SQL: Statement ignored
ORA-06550: line 52, column 46:
PLS-00320: the declaration of the type of this expression is incomplete or
malformed
ORA-06550: line 52, column 3:
PL/SQL: Statement ignored
My team member found another post that ran into the same problem and the section is for 11g only. My db is 9.2.0.5.
Maybe you are looking for
-
Exit/BAdi for COPA char's in VF01
Hi all, Based on the Billing document no. and reference no. , i need to populate the COPA characteristic (a field). I tried to use exit COPA005 but its updating the COPA char's of Billing document Profitability section. I need to populate the COPA ch
-
Is there a difference between ipad demo and normal ipad except the software?
Helli, i want to ask if someone know is there any significant difference between ipad demo version and normal ipad for selling ? Except the software difference and is true that ipad demo can be erased to a normal OS And worked normally after that? Th
-
I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play. Does anyone know how I can make this work?
-
Hello everyone, I need my report ro show dates with HH:MM:SS. But the report only shows dates as DD-MON-RR. I think I chose all the correct format masks in the report builder (DD-MON-RR HH24:MI:SS), and in the rtf tags. Another point is that all the
-
When I've installed Cheese on my KDE5 setup, it failed on start with errors as follows. 1: ** (cheese:7857): WARNING **: Icon 'video-webm' not present in theme 2: (cheese:7857): GnomeDesktop-WARNING **: Unable to create loader for mime type video/web