Contact fields mapping

I am working with an Imagio that is connected to an Exchange Server for email
When the contacts are listed, the persons name is blank, but it shows that there is a contact
If I drill into the contact information, it shows all the pertinent information, name, address, email address etc.
But the listing does not show the name, only a blank entry it looks like.
I spoke with Verizon tech support and they seemed to think it was a mapping issue.
However, there are some of the entries that are in his local Outlook contact listing that ARE showing up.
I'm not sure why some show up correctly and some don't.
Any ideas on how to resolve the mapping of the fields coming from Exchange?
Any ideas are welcome!
Thanks
Mark

A page full of iSync Tips, particularly for Sony Ericsson users is here:
http://www.feisar.com/isync_tips.html
Julian
Aluminium 20" iMac 2.4Ghz, 2GB RAM Mac OS X (10.5.2)
Apple Required Disclaimer: "I may receive some form of compensation, financial or otherwise, from my recommendation or link." (but only if you choose to click on the Google Ads on the linked page).

Similar Messages

  • Contact fields mapped to NOKIA 6230i

    What version of Windows is being used? Windows XP
    What Service Pack is installed? SP2
    What version of PC Suite is installed? 6.82.22
    What is the connection method, cable, bluetooth or IR : IR
    General Outlook synchronisation question...
    I was used to working with the Siemens CX75 so I can only speak of how it was done there.
    In general I'm missing the following functionality. Which fields in Outlook contact objects are mapped to which Nokia phone fields.
    Some contacts are personal, business, friends, VIP, customers etc... It is very nice to have some personalized ringing tone when somebody who belongs to a certain group calls. In the past with my Siemens phone I had the possibility to map the Outlook COMPANY field to a GROUP field in my phone. If I filled out OFFICE in the company field of my Outlook contacts, my phone records could immediately map that contact to the GROUP OFFICE with all personalized group settings applied.
    How can I do this with my Nokia phone? It can't be that I have to adapt this in my phone each time I add a new contact to my Outlook contact folder... there has to exist some automated way?
    If somebody knows a direct or indirect automatic way to map an Outlook Contact item to a Nokia phone GROUP id it would be a great help.

    They also sometimes appear with a dash or minus sign infront of them.

  • IPhone4 iTunes sync Contacts w/ Outlook: field mapping?

    Where can I find something documenting the field mapping that iTunes uses to sync Contacts with Outlook?
    Thanks...

    Good question. Someone screwed up. I thought it was Outlook, but I think this is an itunes/Apple prob.

  • Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Then I suggest you post your question the Microsoft Mac forums since it's their products you're having trouble with
    http://answers.microsoft.com/en-us/mac

  • ActiveSync Outlook to iPhone contacts field mappings

    With the iPhone 2.0 release, is the mapping of the contact fields between Outlook and iPhone when using over-the-air ActiveSync published anywhere?
    It feels to me that the mappings are different for over-the-air ActiveSync versus in the old way of syncing via iTunes.
    For example, I can not find any "Other Phone" field any longer on the iPhone. The iPhone 1.x releases had this field.

    Here is what we have found through testing. The following lists the names displayed in Outlook 2007 and the corresponding name on the iPhone running 2.0.1. We did not find that any fields from Outoll overwrote any other field on the iPhone, even though the field might have a duplicate name, like "work" and "home". In the case of the Home and Home 2 numbers in Outlook, we ended up with two (2) "home" entries on the iPhone. If there is only a "-" under iPhone it is because it did not sync:
    Outlook iPhone
    ========= =========
    Assistant assistant
    Business work
    Business 2 work
    Business Fax work fax
    Call Back -
    Car car
    Company company main
    Home home
    Home 2 home
    Home Fax home fax
    ISDN -
    Mobile mobile
    Other -
    Other Fax -
    Pager pager
    Primary -
    Radio radio
    Telex -
    TTY/TDD -

  • How to add a new field in the Field Mapping

    Dear Freinds,
                   I have two un used fields in the  Source fields to the Target Fields ,
    i have to add the 3   fields which r there in the my source fields to that
    of the target fields ( as per the change in the requirement) in the 5th Step
    i.e Maintain Field Mapping and Conversion Rules
    the Target strucutre & the Source fields( by clicking the button
    Source field and selcting the fields from the popup menu) in the mapping and conversion step  ,i want to  add  3 fields which are availabe in the list of th source list  which i want to map to the Target strucutre  .
    When i tried it is adding in the othe target field
    presently i have mapping (5th sept ) as below.
       ZPA30_08                       LSMW
           Fields
               TABNAME                      Table Name
                                   Source:  ZP0008_STRC-PERNR (Personnel Number)
                                   Rule :   Default Settings
                                   Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
               TCODE                        Transaction Code
                                   Rule :   Default Settings
                                   Code:    ZPA30_08-TCODE = 'PA30'.
    now i want to add 3 fields Pernr,wage type and Amount  , but when iam trying it is
    getting and saved in the TABNAME .
    How can i map please let me know .
    Regards
    syamla

    Hi,
    So you need that this new field have data in old records?
    1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
    2.- If condition "1" is not yours.
    First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
    Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
    To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
    Hope it helps. Regards, Federico

  • How to auto-populate the Contact field from a Custom Object

    Hi,
    I am working on a project where the Contact record is the main focus. I have setup the Contact record as having a one-to-many relationship with CO4. From the Contact Details page I can click on the New button in the Related Record section for CO4 and the Contact from the Details page is auto-populated (which is what I want). I then enter the data into CO4 and click on Save so that the record is displayed in the Related Record section, and then I click into it so that I'm now on the CO4 Details page.
    My page layout for CO4 has both Activities and Service Requests as related records, and the page layouts for both of these include the CO4 field and the Contact field. When I click on New for either of these record types, the CO4 field is populated from the previous record but the Contact is not. I realize this is because there is a one-to-many relationship between CO4 and the Activity/SR, but is there any way to also pull over the value in the Contact field?
    I also tried this using CO1 which does have a many-to-many relationship (if I understand it correctly), but the Contact field is still not pulling over. Is there a way to make this happen?
    Thanks!

    This functionality is not available at this time. I would recommend that you submit a enhancement request to customer care.

  • In XI Mapping multiple fields mapping to single target field.

    Hi Friends,
    In XI Mapping multiple fields mapping to single target field.
    For example my requirement is :
    Source Fields:(This RFC BAPI Structure)
    Empno                0-1
    EmpName           0-1
    Address             0-1
    Taget Field is:
    Details               0-1
    The above three fields passed to the Details Field. Here i am using Concat function
    But i have one query on that on,Every field having "line Break" required.
    Can you please help me out above this requirement.
    Thanks in Advance,
    Sateesh N.

    If you want a line break between the three fields, then try
    passing a,b,c to the udf and in the udf you would have
    return a+"\n"+b+"\n"+c;

  • ABAP code which will use function module during field mapping in LSMW

    Hi,
    During field mapping in LSMW, for one of the field called field, I want to use a function module 'QF05_RANDOM_INTEGER', which will generate random numbers and map that random number to that field.
    How do I write ABAP code which uses function module, during filed mapping for a particluar field in LSMW ?
    Please help...
    Regards,
    Tushar.

    Hi Tushar,
    You can write in FORM ROUTINE and LSMW.
    I hope you know how to write ABAP code at field level.
    If not ...
    Come to change mode->select the field->Rule->ABAP Code
    write a perform statement in ABAP code at field level.
    <b>PERFORM test</b> using val
                 changing valu.
    Go to Utilities(at menu)->switch layout-> extras ->select Layout->check Form routine-> it will display a FORM Routine... at bottom
    this is the place where you can write some code for
    <b> FORM test</b> using value
              changing value1
      FM call....
    .ENDFORM  
    Get the value1 returned and use for the Field population.
    Reward points if this Helps.
    Manish
    Message was edited by:
            Manish Kumar

  • How to create Rules with Flex Field mapping in the bpm worklist

    I Have created a flex field label and was able to map to the flex field attributes .
    But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
    Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
    Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
    Any pointers or suggestion is highly appreciated .

    Hi,
    SE38 -> Enter program
    Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
    Now the selection screen will display with a button "Variant Attributes" at the top.
    Click on that button.
    In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
    In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
    Now whenever you run the prgrm with this variant, date will be displayed by default.
    Regards,
    Subramanian

  • LDAP Field Mapping in 4.6C - Using WebAS 6.10+ as an LDAP Gateway

    Dear All,
      We have a need to enable CUP Functionality (we use GRC AC 5.3) for one of our oldest R/3 systems - on 4.6C. All other R/3 backends are on 4.7+ releases, so it's a multiple backend configuration for GRC AC.
      However, LDAP Field Mapping functionality is missing in 4.6C. It was enabled through LDAPMAP in the higher releases only.
      At the same time, I discovered in one SAP HR document a diagram, which shows that indeed 4.7+ can map and post data directly to LDAP, but for 4.6C and below you can use WebAS 6.10+ as an LDAP Gateway. Meaning that 4.6C calls through RFC some functions in the higher release R/3 system to use its functions for Field Mapping and further transfer of user data to the target LDAP server.
      But... I can not find anywhere how to configure 4.7 / 6.0 servers to act as an LDAP Gateway for the older 4.6C server to bypass its limitation - absence of built-in LDAP Field Mapping functionality.
      Advice on how to realise this concept will be highly appreciated.
    Thanks,
    Laziz

    Hi,
    In order to migrate users, groups and password you have to use the command ldapaddent as you did with this sintax:
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/group group
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/passwd passwd
    # ldapaddent -D "cn=Directory Manager" -w secret -f /etc/shadow shadowNote that you must use passwd instead of people container.
    I suggest you to check this article from BigAdmin http://www.sun.com/bigadmin/features/articles/nis_ldap_part1.jsp
    G.

  • Example of a custom field mapping?

    Ok, I admit it I am struggling here. I have simplified my example from
    what I actually have.
    I have a table that models a flat hierarchy
    ID | START_DATE | END_DATE | CLASSNAME | FIELD1 | FIELD2 | ...
    one of the objects in my hiearchy (CashFlow) has a field that is in fact
    another object called DatePeriod that contains two fields startDate and
    endDate.
    I understand that what I am trying to do is embed the DatePeriod object
    inside of the larger object when it get's persisted.
    I have the following metadata set-up
    <class name="CashFlow" persistence-capable-superclass="InstrumentFlow">
    <extension vendor-name="kodo" key="table" value="INSTRUMENT_FLOW"/>
    <extension vendor-name="kodo" key="pk-column" value="ID"/>
    <extension vendor-name="kodo" key="class-column" value="none"/>
    <extension vendor-name="kodo" key="lock-column" value="none"/>
    <field name="accrualPeriod" embedded="true"/>
    </class>
    and for my DatePeriod object
    <class name="DatePeriod">
    <extension vendor-name="kodo" key="table" value="INSTRUMENT_FLOW"/>
    <extension vendor-name="kodo" key="pk-column" value="ID"/>
    <extension vendor-name="kodo" key="lock-column" value="none"/>
    <extension vendor-name="kodo" key="class-column" value="none"/>
    <field name="startDate">
    <extension vendor-name="kodo" key="data-column" value="START_DATE"/>
    </field>
    <field name="endDate">
    <extension vendor-name="kodo" key="data-column" value="END_DATE"/>
    </field>
    </class>
    Every time I try to fetch a CashFlow object I get an error as KODO is
    trying to select the column 'ACCRUALPERIODX.'
    What am I doing wrong? Do I need to use a custom field mapping? If so
    where is the documentation to help me write a custom field mapping?
    A second question would be what happens if the DatePeriod object is used
    in a couple of places, I don't want to tie it's persistence to the
    INSTRUMENT_FLOW table.
    All help gratefully received
    Cheers
    Matt

    As you suspect, Kodo 2.x does not support embedded class mappings. Kodo
    3.0 will support embedded mappings.
    In the meantime, you can create a custom mapping, but unfortunately our
    documentation for custom mappings is lacking right now. Given how simple
    your DatePeriod object is, you're probably better off with something
    simpler (and as a bonus, less bound to Kodo):
    Just make your DatePeriod class and the field that holds the DatePeriod
    instance non-persistent. In the class that has the (now non-persistent)
    DatePeriod field, add two new persistent fields for the startDate and
    endDate. Then just use internal logic to construct the DatePeriod from
    the startDate and endDate. You can do this using the
    javax.jdo.InstanceCallbacks methods, or just do the logic in your setter
    and getter methods for the DatePeriod.

  • How to change field mapping in IDOC

    Hi Experts,
    My requirement is to create a purchase requisition automatically through an interface using the IDOC sent by a *source client*.
    For this i have used PREQCR as the message type, PREQCR02 as basic type.
    E1BPEBANC & E1BPEBANTX are the segment type i have to use.
    I have created a Z process code in which the function module that i have used is IDOC_INPUT_PREQCR.
    With the help of this i can map all the field values to PR.
    Now there is a field in this idoc called vendor which comes from the source client.
    Now the value that is maintained in this field(vendor) should go to the Text Id that is maintained at the header level. ( i.e. the header text. i.e. In transaction ME51N, the text IDs which we can see at header level, the vendor value should go in one of this text Id ).
    Now how do i do this, because I am using standard funciton module IDOC_INPUT_PREQCR in which there is already field mapping that this vaue should go in this field and so on...
    Do I have to use an exit for the same ?? If yes then which is the exit ??
    Please suggest.
    Regards,
    Priti.

    Hi,
    I think there is no userexits available during the processing using function module "IDOC_INPUT_PREQCR".  You have to copy this function module to a Z function module.  Change as per your requirement and attach the new function module with the Z Process code created by you.
    Regards
    Vinod

  • Field Mapping of CREMAS05 IDoc..!!

    Hi Gurs ,
    Iam trying to map the following fields in CREMAS05 Basic IDoc Type but unable to find the correct mapping field segments in the IDoc.
    Fields need to be mapped are:
    1.Building Code
    2. Pan No
    Can anyone suggest me which segment and field i need to use for the above fields mapping..? or if i extended my idoc with some custom table how i will map into Standard field .
    Thanks .
    Hemant Gulati(A1)

    Hi Jurgen  ,
    Thanks for Reply .
    Vendor Master Idoc  CREMAS05
    i have extended my idoc with some zfields . in zfield i have Building code and Pan no
    like zbuild and zpanno i need to map these in ADDR1_DATA-BUILDING and J_1IMOVEND-J_1IPANNO respectively .
    Thanks & Regards
    Hemant Gulati(A1)

  • LSMW field mapping Rule-ABAP code

    Dear Guru!
    I'm new to ABAP, but I have to write a little in ABAP.
    I create a LSMW project using BAPI for changing standart price of material.
    Input data: material, price, posting date.
    The point is: system should found in table MBEW all valuation areas and valuation types fo which the material record is exist and cang price for all these records.
    I wrote a code for these fields in Field Mapping menu. But it puts in only one record whereas I need it to execute BAPI for all records.
    I wrote the folliwing:
    VALUATIONAREA                Valuation Area
                       Code:    tables MBEW.
                                select * from MBEW
                                 where MATNR = ZHEADER-MATNR.
                                E1MATERIALVALUATION_PRICECH-VALUATIONAREA = MBEW-BWKEY.
                                endselect.
    VALUATIONTYPE                Valuation Type
                       Code:    select * from MBEW
                                 where MATNR = ZHEADER-MATNR.
                                E1MATERIALVALUATION_PRICECH-VALUATIONTYPE = MBEW-BWTAR.
                                endselect.
    May be it's simple, may be not. But I don't know how do do it.
    Will be grateful for any hints.
    Thanks.
    Edited by: assoli on Aug 3, 2011 3:51 PM

    select endselect goes like a Loop, so if you don't store the value in some table (internal table), only the last row will be available to you as it will be overwritten everytime in the loop.
    There is no need of using 2 selects, one select itself will give you all the data for that material in MBEW table. I don't understand what you are doing with
    E1MATERIALVALUATION_PRICECH-VALUATIONAREA = MBEW-BWKEY
    Is E1MATERIALVALUATION_PRICECH a structure ? You need somethng like
    select * from MBEW
    where MATNR = ZHEADER-MATNR.
    E1MATERIALVALUATION_PRICECH-MATERIAL             = ZHEADER-MATNR
    E1MATERIALVALUATION_PRICECH-VALUATIONAREA = MBEW-BWKEY.
    E1MATERIALVALUATION_PRICECH-VALUATIONTYPE = MBEW-BWTAR.
    Append E1MATERIALVALUATION_PRICECH to itab.             "(itab is internal table)
    endselect.
    Then use that itab for your purpose.

Maybe you are looking for

  • Need a decent Disk Printer!

    There was no proper forum for this question, so I figured I'd post here, since most of my work comes from FCP Studio. I'm looking for a decent Disk Printer. Don't need a burner or anything, but if it has one, no big deal. I've searched everywhere for

  • Final Cut Studio 2 and Sony HDR-HC5

    Hello, my name is Marc Bostian. I'm a new Final Cut user, have shot some video on my HD Video on my Sony HDR-HC5. I have hooked it up with a FireWire 800 cable. to my Dual 2.3 G5 tower. I am able to control the camera in the Capture windows, but I'am

  • 10.5.3: Dock of RD clients reverts to default everytime user log in.

    After updating from 10.5.2 to 10.5.3 clients conectet to an OD Directory with remote home directories the dock of all users returns to default. The changes one makes in the dock will not be saved anymore. We are running 10.5.2 server with newly updat

  • Can I isolate part of a shape path to simplify if?

    Hello, I want to simplify part of a complex shape.  Is it possible to isolate part of a shape path and simplify it, leaving the rest of the shape with the original number of anchor points? Thank you

  • Help i need to recover deleted videos off of an sd card

    can someone plz tell me an application that works that i can use to recover these videos