Contact host (or someone) to remove erroneous info from post?

on this thread here I accidentally left a debugging line in the code (which happens to have my username in it). the next post by buddyjack2 copied the line, as well. is it possible to for someone to go in and delete the line that begins "set thisFolder to ..." (followed by an actual path specification), and delete or munge the path from buddyjack's subsequent post?
Sorry to post here, but I can't figure out how to contact a host from the interface or documentation given. this isn't a huge issue, of course, but it would be nice to get it resolved.
P.s. I should add that it's the post near the end that begins with "well, here's an alternate". the problematic line is line 7 in the first code block.
Message was edited by: twtwtw - details, details...

ali brown wrote:
"is this the way to deal with problems like this,..."
It is one method.
But Level 2 status members have the ability to report posts.
At least 150 points are needed to achieve Level 2.
You are currently a Level 1 with 145 Points so you are almost there!
Additional info HERE.
If you have not yet done so, you may also want to review the Apple Discussions Use Agreement.
Enjoy your stay in  Discussions!
ali b
EDIT: The removal does not seem to have been done so I alerted again.
oooOOOOOOooooo... points, huh? I see. ok, I'll mark this as solved and hope they get around to fixing it soon. thanks!

Similar Messages

  • What is the best way to remove all info from a MacBook Pro before passing it along to someone else?          passing it on to someone?

    What is the best way to remove all info from a MacBook Pro before passing it on to someone else?

    Read this: http://www.tuaw.com/2010/09/24/mac-101-preparing-your-old-mac-for-sale-or-recycl ing/

  • I accidently uploaded ALL my Contacts to iCloud. This removed them ALL from Microsoft Outlook Contacts. How do i egt them back to Outlook Contacts?

    I accidently uploaded ALL my Contacts to iCloud.This removed them ALL from Microsoft Outlook Contacts. How do i get them back to Outlook Contacts?

    Hello there inkystephens,
    It sounds like you are needing to sync your iCloud contacts that came from Outlook in the first place back to Outlook. The Outlook section of the following article should help you do that:
    Get help using iCloud Contacts
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How do you remove personal info from a dead AppleTV

    I had my ATV die on me and was planning to replace the hard drive to fix it. Once I got into the machine, I hooked up the HD to my computer and it looked just fine so my conclusion was it is NOT the hard drive. I bought a new ATV and am wanting to sell the old one, but am concerned about the purchaser getting my iTunes account info off the hard drive.
    Does anyone know how to remove that info without wiping out the HD? I know a HD without the ATV information reders the ATV pretty much useless. Would love any input. Thanks!

    Winston Churchill wrote:
    You're planning on selling the broken tv ?
    Perhaps he's selling it for 'spares', but in that case I think I'd reformat the hard drive - presumably if it doesn't start up he can't factory restore, but even that wouldn't necessarily pt off a determined person sniffing for info with appropriate software.

  • How do you remove sort info from your itunes library?

    itunes keeps adding sort information back to my library when I sync my ipod classic and my ipod touch. I want to delete all sort info from my library ( over 17,000 songs, of which over 3,000 purchased on itunes ) please help.

    Click here and follow the instructions. You may also need to turn off automatic downloads.
    (111585)

  • Removing Formatting info from a text var

    I have an input text box for the user to input a name. This box is linked to the variable "name". However when I call up this variable later (by linking "name" to dynamic textboxes), the size color etc. of the font are carried over from the input text box. How would I go about removing this formatting info, so the variable is simply set to the letters typed in by the user?
    thanks

    I suggest getting rid of the use of the variable assignment of the textfield altogether and just assign an instance name to the textfield and acquire the text from the textfield using the "text" property.  As you've already seen in one respect, using the var aspect of textfields can be problematic.  I stopped using it many years ago, but not due to the problems you are having.

  • How do I remove header info from .js without breaking?

    Hello,
    I've created a slider for Instagram using Dreamweaver.  I am trying to remove the text info under the slider which shows it is housed under <header></header> tags in the .js file.
    I've tried every which way from Sunday to try to remove the coding for the text, but end up breaking the entire thing.
    Any .js experts available to take a look?
    As always, your time and expertise is greatly appreciated.
    http://www.saintleo.edu/Instagram/Untitled-1.html
    Kind regards,
    JK

    open the js file jquery.instastream.js and find:
    if(data.data[j].caption == null){var myCaption = '';} else{var myCaption = data.data[j].caption.text;}
    if (data.data[j].comments.count < 2){var commentLabel = 'commentaire'} else {var commentLabel = 'commentaires'}
    if (data.data[j].likes.count < 2){var likeLabel = 'like'} else {var likeLabel = 'likes'}
    $('.slider-content').append("<div id='slider-item"+i+"' class='slider-item slider-col"+$nbrResults+"'><div class='frame'><a href='" + data.data[j].link + "'><img src='" + data.data[j].images.standard_resolution.url + "' alt='" + myCaption + "'><span class='frame-title' style='display: block; bottom: -50px;'><em>" + data.data[j].likes.count + "<i class='icon-like white'>" + likeLabel + "</i> " + data.data[j].comments.count + "<i class='icon-comment white'>" + commentLabel + "</i> " + data.data[j].created_time.timeconverter() + "</em></span><span class='frame-more' style='display: block; top: -38px;'>+</span><span class='frame-reflect'></span></a></div><header><h4>" + myCaption + "</h4></header>");
    j++;
    $slideStatus = j;
    Remove <header><h4>" + myCaption + "</h4></header> from the above.

  • HT201303 Remove billing info from iphone

    How can i remove my billing information from the i phone itself if i no longer have a card?

    Hi Frank,
    You remove your billing information from your iTunes account - not your actual device. You have to sign onto iTunes on your computer, then go to Account Information, and edit the Payment Type.
    Hope this helps!
    Cheers,
    GB

  • Removing STORAGE info from dmp

    Hi,
    I have a problem with a dmp file which was created on Oracle 10.2.0.3.0. I made this export to create a development/test database.
    For the export, I used the following option :
    file= mydmp.dmp
    log=mydmp.log
    rows=n
    owner=myowner
    compress=n
    feedback=10000
    statistics=none
    The problem, I have, is that this export contains all the "STORAGE" options of my production database. I want to remove these informations because the two databases have not the same disk space. The two databases have the same oracle version but the first database is 20 times bigger than the second.
    This is why I'd like to know how I could remove the "STORAGE" options by editing the dmp or add an option on the export.
    Thanks.
    Regards.
    Guillaume.

    Hi,
    I'm using a traditional export "exp user/pwd@db"
    The storage option I'm talking about are these ones : "STORAGE(INITIAL 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)"
    I'd like to remove them from my dmp file.
    Edit : You mean it'd better if I used an "expdp" instead of "exp". If it's that, I've seen too many times that "expdp" was no longer supported and that it was unrecommended for Oracle >9
    Edited by: schgui on 27 janv. 2012 05:10

  • Removing Calendar info from my Ipod

    I do not wish to clear all of my calendar entries from Outlook, but I want them off my Ipod. Help!

    I do not wish to clear all of my calendar entries from Outlook, but I want them off my Ipod. Help!

  • Remove AP object from WLC

    How to remove AP object from WLC 8500 ?  I had dismantle one AP so it is now no longer associated with WLC, I want to remove AP info from WLC. But unable to find any command for the same.

    Hi Scott,
    Thanks for your answer..  But it's not fulfill my question.  I want to remove some of AP entries which is not currently associated with WLC.
    Below are steps which I understood when new AP joins to controller in my case.
    1) We are configuring AP with static IP and capwap protocol thru console login of AP.
    2) We are connecting AP to WLC thru netwok.
    3) When A joins to controller, It will be visible at Monitor section > Access Point Summary
    4) It will start from AP.macaddress
    5) Now remotely we are applying AP name, HIgh availability and assign to appropriate AP group.
    Now My query is when AP joins to controller, somewhere there should be entry in database that this mac address of AP is joined to controller along with AP configuration. 
    I want to delete some of AP databases which are disassociates from controller due to media failure between AP and WLC/AP no longer available.
    Is there any command to remove AP entries from Controller ? or any other procedure ?
    Devang

  • Unable to Retrieve Contact Info from synch server - Gator wrote to try renaming file but I can't manage to find the pathway on my Win 7 computer for that file! got as far as my name under user but can't get to application data.  Can someone help?

    Hi, going crazy.  Can't get this fixed.  Unable to retrieve contact info from synch server.  I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
    I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step....  any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
    Pinina in Phoenix, Az

    Hi, going crazy.  Can't get this fixed.  Unable to retrieve contact info from synch server.  I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
    I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step....  any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
    Pinina in Phoenix, Az

  • If someone is removed from the contact list...

    If someone is removed from the contact list, but the other person has them on block. Can they view the previous messages? Can they still send messages even after being removed?

    To stop future emails, click 'My Stuff' at top right, select 'Preferences' , then in the next page select the 'Email Notification Preferences' tab and click all the 'No' radio buttons. Then click 'Save'.
    If you already have notifications set on some threads you will still get emails from them. Click on your username at the top, then under 'Actions' in the right sidebar, select "'Manage email notifications.' This will show the threads you've set up notifications on in the past. Select those you want to stop and click the 'Remove Selected Notifications' button at bottom.

  • Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message.  R6034 An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.

    Just did the iTunes update that iTunes said was available, now iTunes won't open.  I just keep getting a Runtime Error message. 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    Is anyone else having this problem?
    I tried to re-install and got the following message:  iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 1114)
    Does this mean I have now lost everything?

    I just had the same error: 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says.  I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
    Good luck!

  • How do I remove my credit card info from my account

    How do I remove my credit card info from my account

    You can try this:
    iTunes Store: Changing Account Information
    Also look at the previous discussions on the right side of this page under the heading "More Like This".
    Some users have reported the inability to sect None for payment method. You can always contact iTunes.
    Contact iTunes

Maybe you are looking for

  • Unable to run XPSDrv Driver and Filter Sample

    Hello I'm facing to a problem with XPSDrv Driver and Filter Sample on my Windows 7 x64 machine I installed Visual Studio Ultimate 2013 I installed WDK 8.1 I installed WDK 8.1 Test Pack I installed everything from this site and I think that's all what

  • Order based Intercompany Invoice w/o delivery

    All, your help will be appreciated. We have a scenario where we have to enter a line item in sales order to charge intercompany amout to the other company code for the service they provide .. this line item is relevant for billing but not delivery. I

  • [IDCS3 WIN] Assert while importing tagged text

    Hi,<br /><br />I use the following code to import a tagged text from a buffer into a text frame:<br /><br />IDataBase* database = frameUIDRef.GetDataBase();<br /><br />InterfacePtr<IHierarchy> frameHierarhy(frameUIDRef, UseDefaultIID());<br />int32 c

  • How to generate PDF using FDF file and the PDF form template (PHP)

    Hi Folks, I'm really sorry that I couldn't follow all the valuable discussions going on here, regularly. I need some immediate help. I NEED A PHP SOLUTION. I'm able to generate FDF files using the PDF Form Template in PHP. So, I have a collection of

  • Problem in inbound JDBC Adapter

    My scenario is like sending data from SAP to database through JDBC adapter. but when i tried to excute my program it is giving follwing message: Error processing request in sax parser: Error when executing statement for table/stored proc.  java.sql.S