Contact Import Issue - Only 8 Contacts got imported

When i went into my iphone's settings, and imported all of my contacts from my old motorolla phone (simcard) only 8 apeared and at random. I have over 100 contacts and doing this by hand would be painfull. I have put the simcard back into my old phone to check where all contacts where saved, and there all saved to sim card. Includeing the 8 that showed up in my iphone3g.
Anyone think of anything i cant?

Hi, I had the same problem where it randomly picked 10 of my contacts when I had over 200. Read this please.

Similar Messages

HT1766 I have manually back up my iphone few days back, and my contact got missing the next day. i restored my back up from iTunes, however, my contact did not get restored. How do i check if the manual back up did actually back up my contact or not?

I have manually back up my iphone few days back, and my contact got missing the next day. i restored my back up from iTunes, however, my contact did not get restored. How do i check if the manual back up did actually back up my contact or not? How do i get back my old contact in my phone?

Your entire second paragraph is so confusing I am going to ignore it.
But I may be able to answer your first and third paragraphs, which seem to address the same question.
I wonder where your iPhone states it was backed up yesterday. I am going to assume that you see this under Settings > iCloud > Storage & Backup.
If that is true, then the backup from yesterday is in iCloud. The one and only way to restore an iCloud backup is to do this on your iPhone:
Settings > General > Reset > Erase All Content and Settings
That will cause your iPhone to begin a setup process. As part of that process, assuming you enter the same Apple ID you used when you created the iCloud backup, you will be offered the opportunity to restore from it.

How do i get icloud contacts back into Outlook contacts? My outlook contacts got wiped off in a pst export.

How do i get icloud contacts back into Outlook contacts? My outlook contacts got wiped off in a pst export.
I think i want to tell icloud to sync with Outlook and make icloud the controlling account. NOT outlook to iclout. there are 6325 contacts in icloud. only 12 in outlook. about 10 days ago i had same amount in OL and icloud. i had to restore my computer PC. My iphone is correct. My PC/ Outlook i not. thanks for any help.

Hello Otienogo,
Try the below steps on your iPhone,
Go to settings>iCloud and Login with your Apple Id.
Contacts should be on, click on it to turn it off and choose keep (even if it shows you no contacts)
When the process is done go ahead and turn on contacts again, choose merge. All your contacts should show up if you had a previous backup to icloud.
Hope this helps you.

I just updated my mom's 3GS to the iOS5 and somehow my 4's contacts got deleted. How do I restore my contacts?

I don't understand how my contacts got deleted if we do not have home sharing. Is there somethinfg on iTunes that I can do to redownload my contacts onto my phone?

simms1 wrote:
Just updated my wife's phone to iOS 7 and the 4 dot tracker underneath 'Enter Passcode' does not appear.
That's funny... on mine, it's above the keypad...

My contacts got deleted. How do I get that from my iCloud

My contacts got deleted how can I get them back from iCloud

olgz wrote:
i gave my apple user name and password to a friend to download music
That's not legal.
Change your password. Re-enter your contacts. Your "friend" set up her phone using your Apple ID and deleted your contacts in iCloud.

Contact from my phone book just disappeared.dont know how ..and it happen second time in 1 month time. Apple customer service in India is crap... Sorry to say but 700 contacts got disappeared.can someone tell me how to get this contacts back on my phone.p

contact from my phone book just disappeared.dont know how ..and it happen second time in 1 month time. Apple customer service in India is crap... Sorry to say but 700 contacts got disappeared.can someone tell me how to get this contacts back on my phone.plz

the same problem happened to me also, i felt that while playing hay day, if some calls came in between and if i answered the call, the setting of all the icloud items turns off. (i have backup of all the items on icloud), after deleting the account and making settings of mail, contact, calander etc on on mode and after rebooting the phone, it again download from icloud server. but it is just a headache. do not know how to handle this.

HT204150 My iphone contacts got synced with my daughter's ipod contacts and she deleted my contacts and now they are gone from my iphone. How do I recover my contacts?

My iphone contacts got synced with my daughter's ipod contacts and she deleted my contacts and now they are gone from my iphone. How do I recover my contacts?

First, your daughter needs her own iCloud account, otherwise her ipod will sync will all your data (email, calendars, contacts...). If you have a backup or a copy on your computer, you could turn off iCloud syncing on your iphone, then restore from your contacts via iTunes. After you get a new account for daughter, you can then turn on iCloud.

Contacts got mixed up help pls

i used an itunes account for 2 iphones, mine and my dads, then somehow all my dads contacts got on my phone as well, i was wondering how can i cancel it , like get rid of all my dads contact off my phone, i tried to look at setting andstuff and couldnt find a solution. any suggestions would be appreciated

Stop using the same Apple ID for iCloud on both devices.
Do not delete the contacts from your device, they will be deleted from iCloud and all connected devices.

TS1718 I have purchased two complete albums in the last three weeks, old Bob Seger and new Maroone 5, both have the same issue, only a few songs will play and will skip over the rest of the songs on IPod and on computer????

I have purchased two complete albums in the last three weeks, old Bob Seger and new Maroone 5, both have the same issue, only a few songs will play and will skip over the rest of the songs on IPod and on computer????

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the corrupt tracks from the music section of your iTunes library, close & then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked. This seems to help with partial downloads...
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

I have lost my ipad in the lecture room just 2 hours ago, but i donot have any other apple divices and i donot instoll itues in my computer, the only thing i got was my account number and my email. so what can i do to find it??

i have lost my ipad in the lecture room just 2 hours ago, but i donot have any other apple divices and i donot instoll itues in my computer, the only thing i got was my account number and my email. so what can i do to find it??

Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with your bank or any savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. This requires action before the device is lost/stolen. If the device has significant personal information, it should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

HT1848 I bought Turbo for my kid but the only thing that got downloaded was the iTunes extras. Is there a way to redownload the movie?

I bought Turbo for my kid but the only thing that got downloaded was the iTunes extras. Is there a way to redownload the movie?

You say that 'the only that got downloaded was the iTunes extras' - have you ever download the actual film ? If not then does the Store > Check For Available Downloads menu option on your Mac's iTunes find it ? If that doesn't find it then see if it shows in the 'redownloading' area under Quicklinks :
Whether you can redownload the film depends upon what country that you are in, and if the studio/rights-holder allows redownloading. Does the film appear under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes
If you haven't been able to download the film, and the above doesn't let you, then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

ExpressCard (PCIe) hot-swapping issue only happened in MacBook Pro 6.1

ExpressCard (PCIe devices) with hot-swapping issue only happened in MacBook Pro 6.1. But there is no this issue at all in MacBook Pro 3.1 and MacBook Pro 5.2.
I had tried ExpressCard to SATA2 Adapter (Silicon Image 3132 ASIC), ExpressCard to 1394 Adapter (TI XIO 2200 ASIC), ExpressCard to USB3.0 Adapter (NEC D720200 ASIC) and ExpressCard to SDXC/UHS-I Adapter (JMicron JMB389 ASIC). I had got Kernel Panic (Sytem Crashed) for ExpressCard to SATA2 Adapter, Other three devices can not be detected when we process hot-plug / hot-removal these ExpressCard (PCIe devices).
We expect Apple can solve ExpressCard (PCIe) issue by updating EFI / OS Software. Awaiting for your kind reply~ Thanks in advance!

http://discussions.apple.com/thread.jspa?threadID=2665060&start=0&tstart=0

Error when opening a pdf by clicking a search result. Link works fine when opened any other way. IE issue only.

The issue:
www.norwich.gov.uk
When you carry out a search for "co-operative bank" and click the first result (which is a pdf), Adobe Reader is launched and the user sees this error: "There was an error opening this document, The filename, directory name or volume label syntax
is incorrect"
However, if you do any of these...
right-click the link and choose to open it in a new tab
right-click the link, copy the shortcut, paste it into the address bar and hit go
open the file directly from the library
open the file by clicking on a hyperlink
... you are prompted to Open or Save the file. On choosing 'Open' the file is opened in the browser window with no problems. It is only when clicking on the link in the search results that the issue arises. The issue only occurs with IE.
Current settings:
Client integration is disabled
Browser file handling is set to permissive
Default open behaviour for browser-enabled documents is set to open in the browser
DOCICON.xml is configured to show <Mapping Key="pdf" Value="icpdf.png" EditText="Adobe Acrobat" OpenControl=""/>
Disabling the Adobe Acrobat SharePoint Opendocuments add-on 'fixes' the issue, in that the user no longer sees the error, but instead sees the prompt. However, this doesn't help us as the site is public facing asn we cant control user's add-ons.
Hope someone can help.

I tried this from my laptop with IE8 and it worked fine.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Java.Lang.nullpointerexception issue only isolated to a repository on the job server

I am having the
"Java.Lang.nullpointerexception" error message issue only isolated to a repository on the job server.
This error message appearing when i try to execute or create a new schedule for a job on mgmt console.
I have few other repositories in the same server, with those repositories i am not having any issues, in terms of executing a job or creating a new schedule.
Does any one had the similar issue, and know how to resolve it.
Thanks a lot for the helpful info.

Hello George / Viacheslav, thks to both for responding.
BODS is based on 4.0 never was migrated from 3.2
Under this repository almost 30 jobs currently running with no issues, which were created and scheduled before this error started.
THis error message started just two months ago, since then it is not allowing any new jobs to be executed or creating any new schedules.
But all prior jobs are running fine no issues.
FRom designer i am able to execute with no problem, This issue is only happening on Mgmt console and only in this repository.
Repository name has no apostrophe, all repsositories have the same style naming convention.
"BODS_THENAME"
Here i am pasting the block from viewsoure, where the error is:
<span nowrap class="viewContext">Repository: BODS_JBROOK</span><table class="viewcontrollerarea" style="height:1"><COLGROUP><COL width="100%"/></COLGROUP><tr><td class="viewcontrollerheaderspacer"></td></tr><tr><td class="viewcontrollerheadertabarea"><table class="viewcontrollertabs"><tr class="viewcontrollertabs"><td class="viewcontrollertabs"><img border=0 src="../images/tab_sel_left.gif"></td><td class="selectedTab" nowrap background="../images/tab_sel_center.gif" ><a class="selectedTab" href="/DataServices/servlet/AwBatchJobExecute?REPOSITORY_NAME=BODS_JBROOK&GUID=7cb34824-6d1f-42cc-9968-6c69d006ee87&NAME=Job_TestRaghuRepo&HISTORY=%2FDataServices%2Fservlet%2FAwBatchJobHistory%3FREPOSITORY_NAME%3DBODS_JBROOK%26SHOWREPO%3D2%26ACTIVE_VIEW%3DBatch%2BJob%2BConfiguration&ACTIVE_VIEW=Execute+Batch+Job">Execute Batch Job</a></td><td class="viewcontrollertabs"><img border=0 src="../images/tab_sel_right.gif"></td></tr></table></td></tr><tr bgcolor="#7997CD" ><td height="2px" class="viewfont" VALIGN=CENTER width="100%"></td></tr><tr><td class="viewcontrollermain"><div id="tipDiv" class="tipdiv"></div><span class="viewMessage">java.lang.NullPointerException</span><br><span class="viewMessage"> </span><br>

How to set role which can issue only one command

I am thinking about setting role, which will be allowed to issue olny one command. I have created role test. Which has the following entries in the following files:
/etc/user_attr
test::::profiles=OneCommand;type=role
/etc/security/exec_attr
OneCommand:solaris:cmd:::/tmp/data.sh:euid=0
After this I sill could issue all comands, not only test command /tmp/data.sh.
When I issued comand profiles on test role I received the following:
bash-3.00$ profiles test
OneCommand
Basic Solaris User
All
So I commented line in the /etc/policy.conf to read:
#PROFS_GRANTED=Basic Solaris User
After that, when I try to issue /tmp/data.sh command as a test role I receive the following error:
$ /tmp/data.sh
pfexec: Exec format error
Does anybody know how to set up the role which can issue only one command ? Maybe there is a way to do this in the way which wil not affect another roles (ie, not to touch /etc/policy.conf).
Best regards

RadekW wrote:
I am thinking about setting role, which will be allowed to issue olny one command. I have created role test. Which has the following entries in the following files:They will need the ability to run at least a profile shell otherwise all bets are off. So now you're down to two commands. :-)
bash-3.00$ profiles test
OneCommand
Basic Solaris User
AllFirst you need to define what already exists by default. (policy.conf)
Then you get to change those defaults or create a new default list just for test.
Then you get to add a role or profile for test that allows the execution of a profile shell and one command.
Then you should test all of the user accounts to ensure that something didn't break. This step might be a little overkill.
alan

JNDI obj not binding to initial context--10gRel 2 issue only,works in rel3

hi all,
The issue I am writing about is an issue only in OAS 10g release 2 (10.1.2.0.2) and not in release 3. I have an issue where in I am trying to bind a data source object to the initial context. This data source object reference is created dynamically and is not specified in any XML file (say like web.xml or server.xml). The business requirement driving this is that for each user we need to create a data source dynamically and attach it to the JNDI and then this JNDI name is passed on to Crystal Reports which will use this data source to retrieve its data from the DB. The code for creating the data source dynamically is as below,
private String setDataSource(String username, String password) throws NamingException {
          String prefix = "jdbc";
          InitialContext ic = new InitialContext();
          // Construct BasicDataSource reference
          Reference ref = new Reference("javax.sql.DataSource", CustomDataSourceFactory.class.getName(), null);
          ref.add(new StringRefAddr("url", xxxxxx));
          ref.add(new StringRefAddr("schema",xxxxx));
          ref.add(new StringRefAddr("xxxxxx", xxxxx));
          ref.add(new StringRefAddr("password", xxxxx));
          try {
               ic.listBindings(prefix);
          } catch (NameNotFoundException exp) {
               ic.createSubcontext(prefix);
          String datasourceName = prefix + "/" + oneNumber;
          ic.rebind(datasourceName, ref);
          return datasourceName;
As you can see the reference to the data source is added dynamically. Now when I try to obtain this object by looking up the context for its JNDI name I get a object not found error. This is how I look up the object through my code,
private void testDataSource(String dsName){
          Connection conn = null;
          Statement stmt = null;
          ResultSet rs = null;
          try {
               InitialContext ic = new InitialContext();
               javax.sql.DataSource ds = (javax.sql.DataSource) ic.lookup(dsName);
               conn = ds.getConnection();
               stmt = conn.createStatement();
               rs = stmt.executeQuery("select sysdate from dual");
               String result = rs.getString(1);
               System.out.println("----YOGI----Result of query execution is AAA -----" + result);
          } catch (Exception ex ){
               System.out.println("----YOGI----the exception from this specific block is " + ex.getLocalizedMessage());
          finally {
               try {
                    if (null!= rs)
                         rs.close();
                    if(null !=stmt)
                         stmt.close();
                    if(null !=conn)
                         conn.close();
               } catch (Exception ex){
                    System.out.println("Hopeless");
When I do this I get this exception message --> jdbc/1562 not found in MyAPP
jdbc/1562 is the data source JNDI name I generated in the first method and "MyAPP" is the name of my application. I decided to make the JNDI globally available in the context and hence I used "java:global/jdbc/1562" for my datasource name and even that did not work even though the JNDI name is not bound to the application in specific.
I am really at a loss here as this is a simple add/retrieve operation to a object bound to the context. Can someone tell what is wrong here? The same code works fine in release 3 OAS and also in tomcat and websphere. Any help will be appreciated.
Regards,
Yogi

OK, I seem to be getting a new exception, not sure if I did any change but ran into this exception in the logs,
11/08/24 18:45:08 ----YOGI----the exception from this specific block is javax.naming.Reference cannot be cast to javax.sql.DataSource*
From what I read on the web, this is prevalent in glassfish and jboss. The reason could be that missing j2ee.jar in classpath or duplicate jdbc jars. I added j2ee.jar to my application library in oc4j dint resolve the issue. I removed jdbc jar from the OAS lib folder and restarted, it dint help.
Any other clues, anyone?

Contact Import Issue - Only 8 Contacts got imported

Similar Messages

Maybe you are looking for