Contact info not showing in messages

Since upgrading to IOS7 my ipad will not show contact info for messages. On my iphone the upgrade works fine.

Hi, In such case, try to check the things below:
1> Make sure all contacts are stored in unique memory : sim or phone memory (recommend phone memory)
2> Try to avoid 1 contacts has few numbers and other case, similar or same names for fews contacts
3> Add your country code into the normal number format, eg: 0123455678 --> saved as +60 12345678 (+60 is the country code for MY)
4> Check the settings under Contacts folder: Contacts > Settings > Contact view or Display contacts > try to change Last name/ First name view option one by one

Similar Messages

  • Contact names not showing in messages, only number

    nokia 6121  no names will show when ringing or recieving texts so I dont know who they are from etc, very frustrating, how do I change it to show the contact name not number? I cant find any settings to help me? thanks

    Hi, In such case, try to check the things below:
    1> Make sure all contacts are stored in unique memory : sim or phone memory (recommend phone memory)
    2> Try to avoid 1 contacts has few numbers and other case, similar or same names for fews contacts
    3> Add your country code into the normal number format, eg: 0123455678 --> saved as +60 12345678 (+60 is the country code for MY)
    4> Check the settings under Contacts folder: Contacts > Settings > Contact view or Display contacts > try to change Last name/ First name view option one by one

  • One Contact Name Not Showing In Messages?

    Hiya, for as long as I can remember my girlfriends name has not shown up in my messages/recent calls etc - only her number. I've tried deleting the conversation and her contact and re-adding again - didn't work.
    Tried disabling iCloud Contacts sync while doing it, no luck.
    Also tried resetting my network settings and still no luck
    Any ideas? Thanks!
    iPhone 4, 5.1.1

    I've entered it exactly as I have done the other contacts in my phone, with her name in the right fields but where 'Joe Bloggs' would appear in messages or missed calls list, her number does. I've tried it with both '0' and '+44' (im in England). The contact shows up fine in my address book. I've just tried changing her name to 'Joe Bloggs' and it's still not displaying it in messages.
    However I've just added a '1' to the end of her number, sent a message to it and it's displayed her name! So it's something to do with the phone not liking her number...
    It's very, very confusing!

  • Contacts names not showing in messages

    I need help with this.

    still same with iphone 4s 6.1.1 --- no contact names during receive call if registered with country code and still no contact names on sms if registered without country code
    please replay if you see this message
    please replay if you see this message
    please replay if you see this message
    please replay if you see this message
    Registered numbers with country code on ios 6.1 during incomming call is just number no name!!! And in sms incomming names appear if only number is registred to phone book with country code. Monaco +377...
    I have been waiting to fix this bug since ios 6. Till 5.1.1 worked perfectly now i feel apple is going down and that didnt fix for next 5 months. Even cheapest phone would never have that mistake. I never got feedback i never believe apple read this at all or they take seriously. Having phonebook in iphone they make big deal in every ios they release but the thing is shame it not workinggggggg and is like pain in my .......beeeep... My family calling me and i see only numbers. That shameeeeeee. I feel so sad for you apple. I was so optimistic this will fix in 6.1 but i think thumbs down for 3rd time ;(.
    iPhone 4S, iOS 6.1, Fix this ..........t.
    iPhone 4S, iOS 6.1, Fix this ..........t.

  • TS2326 Contact Names not showing in Messages

    I have the above mentioned problemfor ages & have been saving the numbers twice as +947.... & 0777.....has a solution been found, I have saved them for only few contacts, it's a time consuming exercise....

    Hi, In such case, try to check the things below:
    1> Make sure all contacts are stored in unique memory : sim or phone memory (recommend phone memory)
    2> Try to avoid 1 contacts has few numbers and other case, similar or same names for fews contacts
    3> Add your country code into the normal number format, eg: 0123455678 --> saved as +60 12345678 (+60 is the country code for MY)
    4> Check the settings under Contacts folder: Contacts > Settings > Contact view or Display contacts > try to change Last name/ First name view option one by one

  • The names of my contacts are not showing up when I receive text messages

    The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

    This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • My contacts are not showing up on the PC app or the web interface.  Why isn't this working?

    My contacts are not showing up on the PC app or the web interface.  Message+ works fine on my Note 4 though.  My contacts are saved in my Google account.
    I've tried several things but message+ acts like there are no contacts in the app yet there are names and pictures in my conversations.  Can anyone help me?

        matthttam,
    Let's make sure that we get you up and running with no issues. I want to make sure that we are on the same page. Are your contacts actually listed in the address book on your phone? Are you using Verizon Messages? Or the third party Messages  from the Play Store? Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Some messages sent/received on my iphone and ipad do NOT show in Messages Beta. Why?

    In the past 4 weeks I started experiencing this issue: some of the messages I send from my iphone and ipad will NOT show in Messages Beta for Mac OSX. Likewise, some of the messages received on my iphone and ipad often don't show on my Messages Beta.

    HI,
    The best I have on this at the moment is that the Messages App is still Beta.
    Secondly there have been some changes to the way the iMessages parts are syncing.
    This may be due to Apple making changes to the iMessages server and the resultant sync issue to do with that.
    Of course in the change over, if my guess is right, some messages may have been lost.
    Some of this seems to be altering the  way Messages get Flagged as to whether they were delivered or not.
    8:22 PM      Wednesday; April 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Contact names not displaying in messages

    On my N9 while in messages (sms) my contacts names are not showing up for some people randomly.  It just diplays the number, but it does show the correct contact picture and when i go into the message thread it does show the contact name there.  Anyone else experience this issue and know of a fix?  I've tried adjusting the way the phone number i stored in my phone but it does not appear to help.  I am on pr 1.1

    I have the same. I see that new message come, I see only number. But after some time correct name is shown.
    More probematic thing is that contact is not showing when someone calls me. I see that someone is calling, there is only number shown, I answer, (still no contact name) i talk few seconds and then i look at phone i see that contact is shown. Why it takes so long for my phone to recognize contact?
    I don't need to say how annoying this is, I must recognize all my friends by voice. 

  • Compressor does not show success message

    Compressor finishes job but not give message. Message is 0:00:00 remaining.
    Does not give success message even though the job is finished.
    Compressor 4.0.7 on iMac 21,5, Core i5 2.5, 4GB RA,  OS X 10.8.3 (12D78) - Mountain Lion
    Not long ago it worked normally.
    Now, finishes rendering, however, does not show the message finished

    I know what you mean. When it has happened to me, I have been able to get it to complete by hitting cancel. Then in the file info field of the job pane, adding a numeral to the name. Then re-submitting. The encoding progress bar would quickly go to the end and complete,
    Russ

  • All of my contacts are not showing up

    Once I updated my phone to to iCloud, now all of my contacts are not showing up in my contact list but if I type in the number, they show up.  How do I fix this?

    I also have this problem, just from the iPhone 5s which makes my life crazy, too.
    The problem of having multiple devices doesn't seem to help, but the odd part is when everything I am doing is correct, it still doesn't sync like it used to do before iCloud, and when we had to USB wire connect the iPhone to the Laptop to make contacts sync.
    Might I add that I am not using MAIL on my LAPTOP?
    but ?Britty sounds like her issue is easier as gmail sometimes can create duplicates so you are in good if you are not having that problem or nightmare...
    IF ANYONE ELSE can PLEASE ADD to this THREAD? I would be thankful
    as there seems to be a TRENDING on iPhone 5s not syncing with other devices or backwards.....(I have added contacts to the iPhone 5s and they never get added to the iCloud or the iPad or the Addressbook or CONTACTS on the LAPTOP....
    This should be working and I have checked the CONTACTS on the laptop GROUPS , iCloud, vs ALL ON MY MAC
    it just isn't syncing and in some cases I am getting a WEB DAV error or CAL error...-1
    what is that? iCloud will not sync all contacts?
    something is crazy
    but I want to remain at 10.8 MOUNTAIN LION and not upgrade to MAVERICKS......or use MAIL on my LAPTOP...just CONTACTS ONLY......

  • All of my contacts do not show up in icloud

    All of my contacts do not show up in the Icloud. The contacts that do show up only show the phone number.
    I would think that all of the contct information would show up.
    What am I doing wrong?

    Open your contacts and tap Groups.  Here, check to see if any of your contacts belong to non-iCloud groups such as On My iPhone, Google, Yahoo, and Exchange account or something else.
    Also, check to see if the contacts that only show the phone number belong to a particular account or group.

  • MB1B: Variant transaction is not showing the message of document creation

    Dear MM EXPERTS n GURUS,
    When we create any document using T-Code MB1B, on successful posting it gives a message: Message no. M7060, Document 4900556951 has been saved and is stored in the database.
    Now, we have created an variant of this Transaction (ZMB1B) and assigned this Z-Transaction to the user. Original Transaction (MB1B), has been blocked for that user, because - user should use only ZMB1B.
    Problem is that after saving the document in Z-Transaction, user come out to main screen (SAP EASY ACCESS Screen) with a message You are not authorized to use transaction MB1B Message no. S#077
    While document has been saved in database.
    Why it is not showing the message - Message no. M7060, Document 4900556951 has been saved and is stored in the database.
    Thanks in advance.
    DSC

    Dear GURUS n EXPERTS,
    As I have mentioned in my previous thread - After creation of Variant if I block or not assigned the original T-Code i.e. MB1B, system gives message  Message no. S#077 You are not authorized to use T-Code MB1B.
    If I don't block the or assigned the Original T-code, there is chance to user will use original T-Code instead of variant.
    How can we solve this problem.
    Please advice.
    With thanks,
    DSC

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • Mail not showing new messages on 10.8.3

    Mail not showing new messages on 10.8.3, but messages show just fine on iPhone. Nothing changed to make this happen, not sure where to start. Thanks.

    Back up all data.
    Select the problem mailbox in the mailbox list, then select
    Mailbox ▹ Rebuild
    from the menu bar.

Maybe you are looking for

  • A problem when I try to create a application view throug a Bea MQSeries Adapter8.1

              Hi, guys!           I have installed Weblogic platform 8.1 beta, and try to use the MQSeries Adapter           which provide by Bea weblogic, and it's seems I must deploy the .ear file which           is an application include the MQ Adapte

  • Why does airport express force me 2go wired with my laptop-to-netgear setup

    This is what I had and wanted to do: My laptop was connected wirelessly to my netgear router. i wanted to have airport express join my wireless network. after many many hours of trial and error, I've succeeded getting airport express to work with net

  • Many pages not displayed correctly in non-IE browsers

    Some pages, especially those part of the PDK, are not displayed in non-IE browsers. An example is: http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/sdk22pkg.htm Viewing the source shows a very badly formatted IMG SRC tag (al

  • Locate me error

    When I push the locate me button on my wife's phone it zeroes in on her old address which is 240 miles from here. In Address book her address is the current one. This phone was never at the old address although the iMac was originally installed there

  • Blank / partially blank export result from Motion via Compressor

    Hi all! Final Cut Studio 3 / Mac OS 10.6.8 I have a set up of two semi-old iMacs. One is a white 2006 iMac, the other is a 2007 iMac. I work with the 2006 iMac because the screen is better, but as it is slower I would like to send processing jobs to