Contact name already exists is not displaying

Hi all,
This is vimal, am using iphone 5 and iOS7.0.2. While am adding new contact, its not alert me if I give the name which already exists.

Have a look at this excellent user post iMessage on iPad and iPhone Explained...: Apple Support Communities

Similar Messages

  • HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

    Still  using the @mac.com   mail  address and up   to date on everything, but have not gone to Maverick.  All of a sudden Mail wouldn't let me delete.  Said that title of email was already in trash.  And sure enough it was.  Clicking on the help button on the message gets Nothing.
    The selected topic is currently unavailable.
    The topic you were trying to view could not be found.
    "couldn’t be copied to “Messages” because an item with the same name already exists."
    Any ideas.  My mail is not tied to gmail etc.. just all by it's lonesome.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Quicktime displaying "A file by that name already exists."

    When I try and play a video on my MacBook Pro off the internet that isnt youtube I get this stupid messsage from quicktimeX (A file by that name already exists.) and then it doesnt play the video.
    Can anybody help me as this is really annoying.

    Hi, not sure if this is the answer to your problem but maybe it will help. I was having this same issue the other day. I was trying to convert some movie files into iPhone format and I kept getting this error right near the end of the conversion. I have done these conversions many times with no trouble but this time it just wouldn't work. I tried everything and it kept happening. Then I got another weird error message. And then I finally realized that the destination disk for the converted files didn't have enough room on it for the file! I guess I just assumed that Quicktime would tell me there wasn't enough room when I tried to start the conversion, not pretend that it was working then crap out when the disk reached its fill level.
    Who knows, maybe the same thing is causing your error. Hope this helps!

  • Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists.

    each time I open Fire Fox I get this error "Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists." and
    I can't search for anything. HELP!!!
    Thanks
    Tom

    That is a problem with an extension that tries to install a search bar. The tnt2toolbar should give you a clue about which extension. You didn't add troubleshooting information with the list of installed extensions, so I can't give a suggestion about which extension is causing this.
    You can check for problems with preferences.<br />
    Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • The application could not be installed because an application with that name already exists at the s

    The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.

    1.   I am trying to install:  Adobe - Download free trial version
    AdobeAcrobat
    XI Pro <http://www.adobe.com/go/tryacrobatpro/>
    Operating system:  Windows 7
    Current software:  see attachment
    <Removed by Moderator>

  • Messages could not be moved to the mailbox "Trash - "122730.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

    Cannot move messages from mail to trash.  Get the following message:    messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.

    I just started having the same problem but have found no solution.

  • Folder name already exists error when activating feature

    HI,
    I am creating a document library and adding folders to it using elements.xml in VS 2012.
    First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
    Below is the elements.xml of List Instance, which was modified to add the folders.
    <ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
    <Data>
    <Rows>
    <Row>
    <Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
    <Field Name="FileLeafRef">Test_One</Field>
    <Field Name="Title">Test_One</Field>
    <Field Name="FSObjType">1</Field>
    </Row>
    <Row>
    <Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
    <Field Name="FileLeafRef">Test_Two</Field>
    <Field Name="Title">Test_Two</Field>
    <Field Name="FSObjType">1</Field>
    </Row>
    </Rows>
    </Data>
    </ListInstance>
    How to fix this?
    Thanks

    Hi,
    According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
    I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
    <?xml version="1.0" encoding="utf-8"?>
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <ListInstance Title="LibTest"
    OnQuickLaunch="TRUE"
    TemplateType="10000"
    Url="Lists/LibTest"
    Description="My Lib Instance">
    </ListInstance>
    <Module Url="Lists/LibTest/Folder1" />
    </Elements>
    http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
    Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
    If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Domain Name already exists

    When trying to add the domain name *mcpctv.com* so I can launch my website as CCF Consulting for the register, in Business Catalyst, this happens ***error: domain name already exists, please delete any records of previous domain.*** There are no other records...... So how can I put in the Domain name so I can luanch my website?

    hi Guys,
    need to create a mailbox for a tennant "service" but get this error
    This display name already exists. Please use a different display name
    any idea ?
    We have come across the same issue with the Service@ email account under tennant mode.and we've tried it under multiple domain names that we host..with the same resulting "display name already exists" error.
    The Suggestions above by Fiona do not work, and yield :
    [PS] C:\Windows\system32>Get-user -id service |FL
    The operation couldn't be performed because object 'service' couldn't be found on '<AD Domain Controller>'.
        + CategoryInfo          : NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
        + FullyQualifiedErrorId : FC39465B,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
    Yet... if we create another user and add Service@ as an alias it works .. we just cant create it as a primary user name.
    Steve

  • Email: Warning Account Name Already Exists

    The other day when I clicked on my mail app (not the yahoo mail app) I got the sign in screen. I clicked on Yahoo. Signed in and I keep getting this message "Warning: The acct name already exists." The app on my screen says I have 99+ emails but I can't check them. Help?

    Yes, that didn't work.  I called Verizon Wireless and finally got it back up and running correctly.  Here are the steps:
    1. make sure contacts are backed up through backup assistant (see contacts on your account)
    2. power down
    3. remove battery and card under battery (sim card?), replace battery and power on
    4. pull up settings, SD and phone storage, Factory data reset, reset phone
    5. follow prompts, power phone 
    6. add mail accounts back
    7. replace card under battery
    8. power back
    Everything appears and mail is back in business
    I am so happy.  This has been so frustrating for at least a month now.  I should have called instead of visiting the store. 

  • Operation can't be completed because an item of same name already exists - Mavericks

    I am trying to copy a large file folder (of a large iTunes library of music files) from a WD Live NAS drive to a new AirPlay Time Capsule via Finder on my Retina MBP. Every time I try it, I get the same error "operation can't be completed because an item of the same name already exists."
    I have tried a number of the following solutions:
    1. I cleared my cache out as in this thread:
    https://discussions.apple.com/thread/2231287?start=120&tstart=0
    2. I tried using the Terminal app, as in this thread:
    https://discussions.apple.com/message/21786245#21786245
    3. I tried closing both Finder windows once I started the copy operation, as in this thread:
    https://discussions.apple.com/thread/2231287?start=105&tstart=0
    4. I tried deleting/renaming all files that contained a ~ as in a thread I can't find right now.
    All of these things are not working. I was able to copy several other large file folders (mostly of videos) without a hitch. I can't figure it out. Can anyone assist?
    Many thanks...

    subcrapper wrote:
    "have you tried using Disk Utility to erase 1TB HHD and reformat before trying to copy the data back?"
    Yes, I had to format the 1TB to FAT before I use it.
    whoa there. why did you format the drive FAT? that's an obsolete windows drive format and OS X is known to have various issues with it. this may easily account for your problems. strongly suggest you reformat the drive mac os extended.
    "have you tried using the restore option within Disk Utility to copy the data back instead of doing it manually?"
    There's nothing on the 1TB to restore because I sent it in for warranty exchange. So its brand new, nothing in it.
    he was suggesting that you use the restore tab in disk utility to copy the 640GB drive to the new 1TB one. that's what I suggested too but I mentioned using superduper or CCCloner.
    but you really should reformat the drive first. the only reason to use FAT is if you want to use the drive from both mac and windows. but then you'll likely have to live with the quirks of FAT and OS X.

  • File name replaced with Tilde (~), name already exists error

    When exporting jpg files in Lightroom 4 I've recently had an issue with some of the files containing a tilde (~), the 43rd file in the series often gets it as well as a few others. So in the series one might be named 43-MA~1.jpg instead of the 43-Maegan-details.jpg that I originally named the file.
    When I've tried to rename these files from the finder I get the error "name already exists". If I rename it to something totally different it works but if I then try to rename it the original filename I wanted it gives me the error again or reverts to the name with the ~.
    I'm running 10.6.8, and the problem has been happening the past few weeks but I've never had the problem before. I can't figure out what is causing the problem and it's not every export but it's a huge hassle to try and rename the files.

    This is the one error message that I have gotten in years with Encore. In my case, I had created a Project to be used as a "template," and had done the layout, Imported the common Assets, and then used this as the basis for a 17 DVD set, just Importing the unique Assets to each. Everything went perfectly, until disc 15. Maybe I was sloppy, as I had just completed 14 such Projects that day, but when I went to Build, I got that error. I tried un-Linking and re-Linking Assets, and checked all Menus. Nothing - just that error. Flushed Media Cache, and only the error. I posted here, with the details and asking for ideas.
    In the meantime, I just grabbed my "template" Project and Imported those same, unique Assets. Used my altered Menus from bad Project and did my linking, exactly (or so I thought) as I had just done. This time, the Build was successful and # 15 thru 17 went without a hitch.
    I had Saved that bad Project, and several folk offered suggestions. I tried them all, but never could get it to Build. I always got that error. I finally gave up testing and chalked it up to OE on my part, but I never figured out what I had done wrong, as I really thought that it was by the numbers.
    Based on my experience, I would just start a new Project, being careful in the workflow. That was the only thing that worked for me.
    Good luck,
    Hunt

  • Media Source - 'file of this name already exists' transfering tracks from Zen Micro to

    I've come home for the weekend, and I'm trying to transfer a few albums from my Zen Micro to my Mum's PC for her. Normally this works fine, but for some reason today I keep getting the message 'A file of this name already exists' for about 80% of the tracks I try to transfer. One or two tracks from each album will work and the rest will fail.
    These are new tracks and they definitely aren't already in her music library - I've double checked the C dri've too.
    I'm given the option to overwrite the exisiting tracks, so I gave that a try with one album, but the tracks still aren't didn't show on there once I'd transfered, despite the track number not going up, so god knows what's been overwritten with those!
    Can anyone help?
    Cheers!

    Your firmware is not the PlaysForSure version.
    Anyway, I just want to make sure that you have set up the directory and file naming convention correctly for MediaSource. Here is what you should do:
    - Launch Creative MediaSource Oragnizer.
    - Go to Tools->Settings->PC Music Library and click Properties. Set your preferred folder and file naming convention. Close the setting page.
    - In the Sources window, click to view PC Music Library.
    - Go to View->Right Panel View and select to view your MP3 player.
    - Transfer the tracks from your MP3 player to MediaSource's PC Music Library by clicking the arrow pointing from right to left.
    - If you have updated the track information of the tracks in your MP3 player, the updated track information will also be imported into the PC Music Library database. However, the tags of the files are not updated. Here is what you need to do. Right click the PC Music Library node in the Sources window or right click on any tracks in the PC Music Library window and select "Update Tag". This will update the tag of all the tracks or the selected tracks with the track information as seen in the PC Music Library.

  • Home network name already exists in Home Hub's dat...

    Hello,
    How do I delete this database as it's causing so much trouble/problems by assigning multiple names to same static IP address. How do I connect to the database and delete all the record or create new static address assignment. Each time i tried to rename it back, i keep getting the error "Home network name already exists in Home Hub's database." Remote desktop is now connecting to different machine due to this issue
    Thanks

    Hi,
    Thanks for your reply. I have some computers with static IP physically assigned to them (not via home hub but on physically on the computer itself), when I go to Hub manager, advanced settings and home network, the device name with static IP are mapped to wrong IP, if i click on the name and change it, I then get errorr about the database. I am not talking about or refering to DHCP/DHCP table. My problem is with static IP I physically assigned to some devices but coming up on Home Network with a diffrent name mapped to assigned IP on those computer. Really I should be able to change the name to the right one and click on save.
    I have some server with static IP and when I RDP (using netbios name) into them, they're connecting to wrong system, checking the hub gave me visibility that those system are mapped to those IP of connected system
    Example:
    System A - IP 10.10.10.10 (physically assigned on the machine)
    System B - IP 10.10.10.11 (Physically assigned on the machine)
    RDP to System A, you get system B desktop, checked Home HUB, system A is mapped to system B IP (not sure if I'm making sense here)
    Please forget about DHCP, those are all fine and not really worry about those one
    My question is: How do I clear Home Hub database as described in the error, is this possible

  • Error: Domain name already exist

    I have got the dreaded Domain name already exist error. So I need to have support to clear the server cache.
    I have raised a ticket: Request #120826 for about 5 hours ago!
    There is no live chat online.
    For my users/visitors it is the best time to do this over the weekend. But probably not the best time if you need support... :-(
    Soon i have to point back my DNS to the old site...
    Regards,
    Göran

    Hi GS1234
    Our Business catalyst technical support team is available on chats and cases 24*5 during weekdays . On weekends support remains closed.
    However, for any emergency/urgent issue,  you may file an emergency ticket with us, by checking the emergency option while you create a ticket as shown : http://prntscr.com/5fc55m  

  • Project Server 2010 and Report Builder 3 : the same name already exists

    Hi,
    I created my first report in Report Builder, and,
    although it's not perfect, I tried to save it. But I get the error :
    Impossible to save the report "No title.rdl". A file from another type with the same name already exists".
    I tried to change the name 5 times but I always got the same error.
    Any idea ?
    Thanks

    Hi WLID,
    I have taken a sample test in my environment, it works well. If there is already another type file named “No title” on report server, then it can be saved on report server. If there is already a report named “No title” on report server, then it would prompt
    that “An item named ‘http://servername/reportserver/foldername/No title’ already existed. Do you want to replace the existing item?” when we want to save the report in the same folder.
    What’s the location that you want to save the report? Is it a report server or others? Could you please provide us more information about the issue? You can try to reopen the Report Builder, then create another simple report to text the issue again.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for