Contact name changes when saving

Just tried to add another doctor to my contacts with the name "Dr Smith" and when the contact is saved it drops Dr and just saves it as Smith... does the same thing with Mr and Ms... I previously entered other contacts with the Dr at the begining and it worked fine. Something from the GB update? Anyway to fix? Thanks

Searski,
I have researched this device and I do not show that this is a known issue. I have a different device, but it does have the Gingerbread software. I entered the same name mentioned in your posting and it did stay as "Dr Smith."
Please complete a master reset of the device and then try entering the number again.
This setting erases all data from your phone, including your Google or other email account settings, system and application data and settings, and downloaded applications. It will not erase current system software and bundled applications, or files stored on an optional installed memory card, such as music or photos. For this reason, please make sure the data on your device is backed up.
Below are the steps on performing the reset.
Please post back with your findings.
Thank you,

Similar Messages

Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

There is another setting for "Start Conversation from", that needs to be set to phone number.

Contact names change to facebook names

As the tite suggests, my contact names change to their facebook names, I have to contiunessly change certian names back, namely 'mum', I'd much rather call my mother that than her real name.
How do I stop the contacts from reverting to facebook names ever few hours?

If you go to Settings - Facebook you have an option to turn off Contacts.
All it does is not add your Facebook friends to your contacts on your phone, which theoretically should solve your problem of the names being changed.
Sorry the solution isn't more precise to your problem but it should at least work as a temporary fix

Why didn't my iCloud account name change when I changed my Apple ID?

Why didn't my iCloud account name change when I changed my Apple ID (because I got a new email address)?

It doesn't change on your device automatically. To change the iCloud ID on an iOS device you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
To change the ID on your Mac, go to System Preferences>iCloud, sign out, then sign back in with the new ID.

Saving/exporting issue in Windows 7-file name changes when trying to navigate

I just got Windows 7 on my computer and am running ID CS5. The weirdest problem happens when I try to save as or export a file. The dialog box comes up and normally, I would be able to select a folder I want to navigate to just by typing the folder name, but what is happening is that the first letter goes to a folder, but upon typing the second letter, it starts changing the name of my file.
So for example, I am saving a file ABC.indd and I go to navigate to save it in a folder called Project XYZ. When I type in "P" to get to that folder name, it jumps right to the first folder starting with P. However, upon typing "r" my file name changes from ABC.indd to "r.indd." If I kept typing, it would become "roject XYZ.PDF."
This happens when saving as a file or if I am exporting a PDF. Our entire marketing department or 6 people was recently upgraded from XP to 7 and we all have this problem in ID. This does not happen in Illustrator or Photoshop and it has our IT department baffled. It is driving us crazy though because we make dozens of files a day and now have to manually scroll through long file structures when exporting PDFs, which is so time consuming, not to mention aggravating.
In searching for this problem, I found another poster on a different website who has the same issue, but no one had any suggestions.

Tell whomever is emailing the file to zip it first.

Why does the PDFs' name change when i view them in the iBooks app?

i have some past papers and marking schemes in my iTunes library....when i sync them to my iPad, they appear just fine....they are there just the way i named them and all...
but when i open them, the name changes to some coded-ish name with lots of numbers and all that....
is it possible for me to change some setting and save the name i want for those PDFs? Or am I going to have to live with this madness?
please help!

Hello, I wanted to follow up on this issue after reviewing some of the changes with the current update. [https://bugzilla.mozilla.org/show_bug.cgi?id=1049521] This bug addressed some Windows HKEYs that are changed when Firefox is updated/or installed.
As an update, a patch has been made and changes are on the way for fresh installs of Firefox :-)

File name changes when I sync videos

As title says, when ever I load a video into my 3Gs Iphone the file name changes to a numerical one.
How do I keep the original file name?
As it is I can only sync 1 video at a time then rename it before adding another.

Oops, Just realised I put this n the wrong forum. Just to clarify this is prerecorded video files.

Nokia 6220c - Contact name display when text messa...

Hi,
When I receive a message my Nokia 6220 classic says "1 message received" but my friends come up with "New Message" and then the name of the sender - or else another friend's Nokia gets "1 message received" with the contact name below.
Is there any way I can get my phone to do this either by adding software or choosing various phone options?
I have the latest 5.15 firmware.
Please help

hi hadimassa,
what is this " E63-1(260.02) RM437 V: 200.21.012"
i see these from my mobile :
Before firmware update:
100.21.110
14-11-2008
RM-437
Nokia E63-1(27)
After firmware update:
200.21.012
18-06-2009
RM-437
Nokia E63-1(27)
what is that E63-1(260.02) in your signature ? is my firware updated properly ? how to know this other than *#0000#

Contacts' Status Changes when I change mine

I'm a newbie to Skype. I mostly use the desktop version on a Windows 8.1 laptop but also have the Skype app on my Android phone. The problem occurs on the laptop.
When I sign into Skype and change my status to "online" the status of one of my contacts instantly changes to "online" as well. Similarly, when I manually change my status to "offline", my contact's status changes to "offline" immediately. So, when I think they're online and available for a video call, they're really not listening and my call goes unanswered. In fact, after this happened several times, I finally emailed the contact who promptly replied that their computer had been off during the days when I'd tried to call.
What's the fix for this, fellow Skypers?

There is no fix that you can apply. The issue is on Skype network.
http://community.skype.com/t5/Security-Privacy-Trust-and/Skype-invading-and-changing-people-s-online...

Color changes when saving

I have a PSD file that I've been working on. I've tried saving it as jpeg, png, and tiff, and every time it makes the colors more saturated and more red. I've tried opening it in Windows Photo Viewer, Firefox, and Chrome and the color is changed in all of them. Oddly enough however, if I open the photo on my iphone, in Windows Paint, or in Photoshop again, the colors remain unchanged.
Color Profile is sRGB and I have it set to embed the profile.
The proof setup is Working CMYK. I tried changing it to Monitor RGB and the picture looked the same.
Any help is greatly appreciated because this is driving me insane.

Thanks for the help twenty one and Noel but I think I need to be a little bit more clear on what it is I would like to accomplish. Basically I have a photo that displays two different ways: normal saturation and oversaturated. I would like it to always display at normal saturation, no matter what computer or what program it's being viewed with. Currently the only programs I've found that always display it correctly are Windows Paint and Internet explorer, neither of which are color managed. Is there any way to accomplish this or do I just have to accept the fact that it will always look different depending on what it's being viewed with?
Information I think may be relevant to accomplishing this goal:
The PSD always appears oversaturated in photoshop now whereas it used to look fine. I have no idea what I did to change this but I've tried doing a system restore and resetting my photoshop settings to default and it has had no effect.
Under Color Settings, it shows the RGB working space as sRGB IEC61966-2.1. However the info panel shows the PSD as being untagged RGB. The image mode is RGB color.
I've messed around with assigning new color profiles and nothing works. The only thing that makes photo look normal again is turning on proof and setting it to Monitor RGB.
I tried saving two different jpeg files, one where I checked ICC Profile sRGB IEC61966-2.1 in the save as dialogue box and one where I did not. Upon opening both files in photoshop, the file that had the sRGB box checked shows up as being sRGB in the info panel and the file that did not have the box checked shows up as untagged RGB in the info panel, as one would expect.
Both the untagged RGB and the sRGB show up the way I want them to in Windows Paint and Internet Explorer (normal saturation), neither of which are color managed programs.
Using Firefox (color managed), the untagged RGB shows up correctly and the sRGB file is oversaturated.
Using photoshop and Windows Photo Viewer (color managed), both the tagged and the untagged photos are oversaturated.
It should also be noted that the above results hold true on my computer and a second computer that I tested. However, on two other computers that I tested, both the tagged and the untagged photos appear correctly using Windows Photo Viewer, Paint, Firefox, and Internet Explorer. Based off of what I've read about Color Management I find these results very peculiar. Particularly the fact that sRGB and untagged RGB files show up differently on Firefox but the same on Windows Photo Viewer since both programs are color managed. I also find it very odd that after years of using photoshop without any knowledge of color management I've never had a problem with it until now.
Again, I would like the photo to always look the way it does when using Paint or Internet Explorer or when saving it as an untagged RGB and viewing it on Firefox. Thanks again for any help you can provide because this is driving me insane.

Color Changes when saving psd to jpg

Some of my psd when saved to jpg take on a distinctly bluish cast. Has anyone seen this? What is the cause? How can it be defeated?

When You save a jpg with profile embedded does the appearance still change?
Photoshop uses the Color Settings’ Working Space for displaying files that are not Color Managed, therefore one should embed the profile – unless space considerations (especially for internet-use) speak against it, in which case one should usually convert the image to srgb anyway.

The arguments' name change when I re-import the model

Hello
Some times, when I re-import Java bean model in developer studio (SAP NetWeaver 7.1 Composition Environment SP06 PAT0001), the arguments' name change to arg0, arg1u2026.
For example:
I have some method in the EJB model, such:
public String getCustomerName( String customerId);
Some times the reimport is ok, but some times the reimport changes the arguments' name, like:
public String getCustomerName( String arg0);
What are Iu2019m doing wrong?
Regards
Janeth

Hi everybody,
i have the same problem. i also tried to reimport different ejbs into different wd-projects. allways the same problem. and i didn't found a workaround for this.
i also deleted the model and made a complete new import. same result.
i also created a new fresh web-dynpro dc and created a new model there, also same result.
I assume that it maybee has something to do with an nwds-update i made last week (so between last model-import and new model-import).
does anybody has a solution for this so far?
regards
matthias

RGB Colours change when saving for Web

I'm saving work in RGB for Web, but the colours come out muted when saving through "Save for Web" also when saving as normal. Does anyone know why this happens? Normally this occurs through RGB to CMYK conversion, but can't figure out why it's happening, they look fine on screen before saving, but look all muted when saved.
Cheers

Two things: you could be working in Adobe RGB and saving directly to JPG, without converting to sRGB first. When the sRGB profile is assumed (Windows), or your narrow-gamut display profile is assumed (Mac), you get a color shift. So make sure you converting to sRGB as or before you save the JPG. Also, if you're on a Mac, then the display profile is assumed or assigned to images from the web. If you're using a laptop, the display gamut is much narrower than even sRGB, so you will see a color shift. The way around this is to use a browser capable of assigning sRGB to untagged images (like Firefox with color management enabled).
You can always embed sRGB profiles in your images, which would be fine for portfolio pieces, but impractical for smaller images. Embedding a color profile will ensure that Safari displays the images correctly.
Read here for a start:
http://www.gballard.net/psd/saveforwebshift.html

File name generated when saving a process file

When I choose to save a file (save as for instance) I get an odd
looking default file name with a ~ in it such as; ne6e29~1.l4p. Why?

Leo,
I agree, that is an odd file name. I am not sure where the "~" is coming from. I am using Lookout 5.1 on a Windows XP machine. If I open a new process and use the default process name "Process1", the same name is appears in the "File name:" field of the "Save Process File As..." window when I navigate to File >> Save As. Even if I choose another name for my process, that name is then used as the default file name when I go to "File >> Save As."
If you save your process with another name, such as "myprocess.l4p", does the same default name appear when you go to "File >> Save As"?
I have seen the "~" character used in other applications when a file name exceeds the maximum length but I do not recall having that problem on newer OSes like Windows 2000
or XP. I tried to save a process with a really long random file name on my machine and I was still unable to reproduce the behavior you are seeing.
What version of Lookout are you using and what OS are you running. If your process is running on an older OS or you are using an older version of Lookout, it may be that the file name is limited to fewer characters.
Regards,
Aaron C.
National Instruments
Applications Engineer

File name changes when I click on another file.

Regardless of which application I'm in (CS2, Quark etc.... When I go to save a file, if I accidentally click on a grayed out file while I'm navigating to the folder where I want the file to be saved, the file I'm trying to save assumes the grayed out files name. I assumed this was a bug with OSX and Apple would fix it but now that we're up to 10.4.5 I'm dumbfounded.

That's not a bug, it's a feature.
Seriously, it's intentional. It could be that they made that change at the request of many Windows switchers, or it just came along with the BSD version of Unix that OS X is built on top of. Either way, it's part of OS X. You need to be careful not to click on a file name in the save dialogue.
For long time users os OS 9 and earlier, this is a headache, as you never had to watch for that before. But once you get used to it, it's actually very handy at times.

Contact name changes when saving

Similar Messages

Maybe you are looking for