Contact notes: MFE lost formatting after edit with...

The text in my contact notes field loses the formatting. End of line is not being kept in the device. In Outlook the text remains normally formatted with proper end of lines.
I have this problem with MFE (I use the last versions of MailForExchange). The problem does not happen with Roadsync.
Tested with E65, E71.
In Outlook, I store lot of text in the Notes Field of each of my Contacts. After syncing with the mobile device, I check the content in the device and the text appears as one sentence. The End Of Line EOL (input by enter key) is being ignored.
If I create the contact on the mobile device and edit the contact notes only on the mobile device this does not happen. As soon as I edit the notes field in outlook and after the next sync, the text appears as all lines together without EOL.
Switching back to Roadsync and resyncing all data: all contact notes are properly displayed in the mobile device too.
Does anyone know how to avoid that Outlook messes up the formatting of the contact notes in the device?

i saved some information in the task boxes, which somehow do hold the original format. it is a better than nothing option since the contact details permitted in n71 are so sparse.

Similar Messages

Mail does not load the mail after opening with 10.10.3 on macbook air

Mail does not load the mail after opening with 10.10.3 on macbook air

Under Window in the Menu bar select Connection doctor. You will see green to indicate a connection and red to show there is a problem. Except for iCloud account you'll see two entries for each account 1) receiving and 2 SMTP for sending.
If it's red, this usually means it's missing the password.
For Incoming messages, set in the account window, under Account Information tab.
For Outgoing (SMTP) messages, follow these steps:
EDIT SMTP SETTINGS
In Accounts window > Outgoing Mail Server SMTP: select to Edit SMTP Server list... from popup.
Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
Under Advanced Tab:
Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587.
Verify if your server require SSL.
User Name. Enter full email address eg. [email protected]
Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password more info)
Open Connection Doctor under Window in the Menu bar.
Do you see green light now for your account SMTP?

I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

Hi
I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

On the iPhone tap Settings > iCloud
Switch Contacts off then back on then reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this?

One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this? is in final cut pro 10.1.4

Why are frame sizes increasing after editing with Nik plug-ins?

I’m using the Nik Collection of plug-ins with Aperture, and have discovered that the frame size of the resulting edits always end up larger than the original - sometimes much larger.
The original image starts as 4592 x 3448 but after editing, the longest side of the resulting image is typically over 5000, 6000 or even 7000 pixels.
I recently worked on a cropped image that started at 4138 x 2759 and ended up at 7361 x 4908, after editing with a combination of Dfine, Viveza, Color Efex + Silver Efex. If I export a version during the editing process, and then carry out futher editing, the frame size increases again.
I’m exporting from Aperture using the TIFF - Original Size (16 bit) setting.
Can anyone tell me what’s going on here? I’m concerned that the quality of the images is being compromised by the enlargement.
I'm using the latest set of Nik plug-ins, with Aperture 3.2.4 on a MBP running 10.6.8

Keli
In order to open Aperture in 32-bit mode by default you can right-click on the application icon, select "Get Info" and check the box marked "Open In 32-bit Mode" (or you can continue to run it by default in 64-bit mode and just get forced to re-open the app anytime you need to use plug-ins that can only run in 32-bit mode).
hope this helps!
Raf

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

After editing with photoshop and saving, can't find it

1) After editing a photo with Photoshop, save it, I can't find it. Only the original unedited photo is in my library.
2) I tried adding a name extension to the DSC...., but can't find that either.
3) Where can I resize photos using Iphoto editing?
Thanks for any suggestions.

Are you using Photoshop as described here:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
OT

Sony AVCHD clips "judder" after editing with iMovie9

The video plays back smoothly on a TV screen in 720p when played directly from the Sony HDR-TG7VE camcorder, but after editing in iMovie the panned shots judder. The movie looks so bad it is hardly possible to watch it. The picture also becomes much "softer". My workflow is: importing as Large 960x540 file, exporting to AppleTV via iTunes as Large file with the same settings. I am recording the movies on HD HQ setting, which I guess means 720p as well. I would appreciate any help how to fix it.

I feel your pain. I own a the previous model, a TG3 and was pretty dismayed by the amount of "judder" i saw after it had been through iMovie. As you state, when viewed natively off camera, image is smooth as silk. If you google AVCHD and Judder you will see a lot of comments on this (half of them mine!).
As a general comment, a lot of people have said with some AVCHD cameras and panning, the golden rule is DON'T. If you have to, do it at extremely slow speeds.
I wasn't really happy with this, as i'm convinced it's happening somewhere in the import/export of iMovie.
Look at my example i posted up a few months ago, is that what you are seeing?:
http://gallery.me.com/cosconstantinou#100376
This weekend, someone off a different forum presented me with a glimmer of hope. He also owns a TG3 and has been using Elgatos Turbo Hd usb convertor thingymebob. Look at this link, scroll down to the comments (at 9:46pm) and download his clips from yousendit:
http://techmoan.wordpress.com/2009/03/26/elgato-turbo264-hd-hands-on-user-test-a nd-review/
Check out the 720p 60fps at 10,000kps clip, it's STUNNING. I was so relieved to see the difference.
Trouble is, I don't know how to recreate this in iMovie. It's (the above clips) been encoded by the Elgato stick and not been through iMovie. If I view them on my Mac and open movie inspector it says it's "H.264/AVC" by format.
If i try and recreate these settings as an export in iMovie ("export to Quicktime) I don't get the same smooth pan-could be something to do with the "AVC" element mentioned in format.
I also noticed my picture getting far softer after being imported into iMovie. I guess as the AVCHD is being converted into AIC, that was always going to happen. It's basically 2nd generation from the off (AVCHD is too compressed for iMovie to edit it natively). If you are ever thinking of editing a larger size file, 1080i, then consider this guide and follow it to the T:
http://blog.davidglover.org/2009/03/creating-hd-video-with-imovie-09.html
except at step 4c (tick "both fields") and at 5a change the resolution to “1920 x 1080 HD” and increase the bitrate to 16200=makes it 1080p instead of 1080i and actually looks the same on your tv as straight off the camera (almost). I am using a PS3 to watch my movies back, which is more capable than Apple TV i believe.
I'm sorry I cant be of more help. I have been hunting high and low for an answer to the judder issue and still haven't found anything concrete. Some blame the AVCHD format, some say its our CMOS rolling shutter, none can tell me why it doesn't happen straight off the camera, but does via iMovie (or other video editing programs apparently).
If you are recording in 720p, then you video is progressive, so it cant be an interlacing issue.
Best of luck with your search, keep me posted/update this thread if you find any answers and if you do nothing else, download the clips from the Techmoan link above and check out the one i mentioned. It's taken me 3 months of searching to find anything close to that as a possible solution.
Cos.
Message was edited by: cos constantinou

CS3 file will not open in CS3 after editing in CS6?!?

Pardon the exclamations but we're creative folks not techies. After editing a CS3 file in CS6 we are unable to open it in CS3. Looks like CS6 will only save back to CS4? So once edited in CS6 then I can no longer use CS3 to work with the files? Can anybody confirm this for me? We also tried to export to IDML but CS3 would not read it.

When you open an older version of InDesign file within a newer version and edit them, the older version of file is first converted using some required plugins of the newer version of InDesign and then a consolidated new file is generated including the required plugins. Now, if you try to open this newer version of file back in an older version, the older version of InDesign looks for the required plugins used to edit the file and fails because InDesign older version did not use those plugins to create your file.
Please let me know if that explanation helped understanding why this behavior occurs.
-Shushobhan

Not updating database table after editing using theADFapplicationJdev10.1.3

Hi
I created the Sample Browse and Edit JSF JSP page oracle ADF application as explained in the cuecards in Jdev10.1.3.
After editing the department table rows in browser i am checking the database tables for the changes.
But my table are still with the old data.they are not updating with the values i changed in the browser.
i followed the steps correctly as explained in cuecards.
where i am going wrong.
What i have to do to commit the changes in to database in my ADFApplication.Did i need anything to add my code.

In Jdev 10.1.3,there is no operations folder directly under the Application data module control.
there is only constructors,merge entity,persist entity,refresh entity,remove entity and findalldepartments(),findallemployeeas() nodes under the application data module control.
In findalldepartments,findallemplloyees the operations node is there.under that i don't have the commit .i have only create,execute,first,previous,last,next,delete,removerowwithkey,setcurrentRowWithkey,setcurrentRowWithkeyValue under the operation node.
so how can i commit the operations in database.
Please help me.

Events not showing in iCal after sync with iPhone

A whole week of appointments don't show up in iCal after syncing with my iPhone - all the appointments are on my iPhone but they won't copy over.
Funnily enough, the week that is not showing up is changing every Monday...
Anyone seen this before?

I found this solution in another discussion. It's from this website: http://iphonewriter.blogspot.co.nz/2008/05/how-to-fixing-ical-iphone-sync-issues .html)
"You'll know the syncing issue when you see it, because the new events you enter into the Calendar on your Apple iPhone will not appear in iCal. Said another way, you'll enter a new event into your iPhone, use iTunes to sync with your Mac (or MacBook in our case) and the new event on your iPhone will not show up in iCal. Keep trying, synch as you might, iCal and the Apple iPhone just won't get along.
Here's the down and dirty fix:
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Restore your calendar. When prompted, use your notes from Step #1 to select the file your created earlier.
At this point all my appointments were showing up properly in iCal, and did not disappear after syncing again with the iPhone.

Plugins not showing up in Images - Edit With... menu

I've installed several Aperture 2 plugins (I currently and using Aperture 2.1). Every user guide states I can find the plugins in the following menu: Images -> Edit With...
The only plugin I ever see in the is Dodge and Burn.
Like I said, I run completely through the installer for the plugins. It asks for permission, says its installing packages, writing files, writing scripts etc. When I right click on Aperture and select "Show Package Contents", I see no traces of my installed plugins in the "Plugins" folder.
Anyone know how I can resolve this issue?

I just reread your OP. The plugins should be stored in: Root (not User) >> Library >> Application Support >> Aperture >> Plugins >> Edit (or just plugins w/o the edit folder)
Are they there?
I just installed that plugin you linked to, and it worked fine. Have you restarted, repaired permissions etc? Remember that the Aperture application HAS to be in the applications folder, not in a sub-folder and not renamed to function properly.
dls

I phone not saving itunes music after sync with imac

When I sync my Iphone 4 with itunes on my iMac, it does not save my playlists or all of my music. When it is connected with the usb cable it shows up on the iphone but as soon as I disconnect it is gone. For some reason it is showing up on my ipad2 but I cannot shuffle any of the songs on the ipad I have to hit them one by one to play them or they just keep repeating themselves over and over.I do have them set up to wirelessly sync, but when I noticed my music was not there I tried to sync with the usb cable.When I plug in the iphone to the imac, I get a message that says no camera found same thing with the iPad2. Anyone have any idea what the problem is?
Thanks Karen
Message was edited by: konak

-> iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad

Photos fail to print after editing with clone stamp tool and layers

After editing using the clone stamp tool and using layers the photos fail to print. I even tried a simple crop edit and the photo failed to print.
Photos print without editing.

Im working on a Mac OX 10.9.4 and Photoshop Elements 12 for Mac
I tried printing from Organizer and editor and I have the image saved on my desktop
I don't receive an error when I try to print. The message usually reads: Printing, 2% complete or 13% complete.
I have left it sit overnight but it never produced a photo.
The printer is new: HP Envy 5400 and I have no problem printing photos from I Photo.

Lost format after using text editing tool

Using Acrobat 9 Pro and the text editor on a scanned document. The edit works fine but when I save the altered file I lose the page format. The text has unwanted spaces and changes in the indentation. What am I doing wrong?

Probably nothing is wrong, other than your assumption that Acrobat is an editor. The editing it can do is very limited and is not recommended if it can be avoided. You might find it easier to save the OCR'd document to a DOC file and work on that, though you will probably have to fix the formatting and such.

Contact notes: MFE lost formatting after edit with...

Similar Messages

Maybe you are looking for