Contact Person and Business Address and Home address

Could anyone explain me how Business and Home address are determined for Contact Person. Are this data stored with different person number for specific contact person? Is there any maintenance which tels which data should be copied to Business and Home address from Contact Person address data?

Hi Tomasz
Contact Person Info is maintained in the table KNVK.
It is maintained through VAP2 transaction.
When you assign a contact person to a Customer in XD02/01 the home and business addresses get copied from VAP1 (KNVK table).
Pushpraj

Similar Messages

  • Relationship Between ECC Customers (Contact Persons) and CRM BP

    Hello,
    I am new to middleware and need some help with the relationship between ECC customers/contact persons and CRM business partners.
    We are transferring via bdoc this information from ECC to CRM.
    Which bdoc types are used when transferring customers/contact persons? I believe it is BUPA_MAIN but am not too sure. How is the relationship between customer its contact person transferred? Is this done through BUPA_REL? I looked at the segment fields in SBDM but am not too sure how to understand the relationship...
    Thanks for the help!
    Regards,
    Tiffanie

    Thanks! With the initial load, how do I check what fields are being passed in the bdocs?
    I tried to look for customer_main, customer_rel in SBDM  and couldn't find it. Instead I used BUPA_MAIN and found some segments but couldn't find all the data that was being transferred (e.g. customer name, address, etc...) Where do I find all the fields contained in the bdoc?
    I see them in SMW01 when I view the bdoc contents but can not find the actual structure (data fields) that are being brought in from ECC.
    Thanks!
    Tiffanie

  • How to maintain the contact person in Business Partner ?

    Hi Experts,
    Could you help to resolving the below Requirement.
    __  +Requirement:+__
    How to maintain the contact person in Business Partner ?
    How to get the Contact person in Is-Media Documents?
    Thanks& Regards
    Venkat

    Dear Venkat,
    In SD Customer Master data, we can maintain Contact Person in General Data tab page.
    For my knowledge, we can not find u201CContact Personu201D field in ISM Business Partner u2013 General Data. Correct me if I am wrong.
    Mostly user enters the contact person details in u201CSearch Term 1/ 2 fieldu201D in Address tab page in ISM Business Partner u2013 General Data tab page. While creating ISM Billing Document for this Business Partner, system prints this contact person details in ISM Invoices.
    (Or)
    While creating ISM Order, user can maintain Contact Person name in Header Details(Click on u201CGo to >Header>Details>Purchase Order Data>Cont.Person)
    If you maintain Contact Person name in Header Details also, system print this contact person details in ISM Invoices.
    Check from your end.
    Best Regards,
    Chandramohan

  • Contact person for Business

    Dear Skype team, we would like to know contact person for business purpose. we are interested to work together with skype .
    thank you

    Hi, Higumaisme, and welcome to the Community,
    Please see this:
    Using Skype in your business
    Transform the way your business works with cost effective and collaborative tools.
    Contact our solutions team
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Multiple contact persons for Business Partner

    Hi,
    I'm searching for an extractor which can extract all contact persons beloging to a Business Partner. The customer would like to make a query on business partner and their contact persons related to a marketing campaign. Any suggestions?
    Regards,
    CB

    Using the DTWQ to update the new additional contact person. No need to use add option. It is because you just only add the additional contact persons and no new BP
    jimM

  • Contact Person within Business Partner?

    Hi,
      I have replicated vendors from ECC to SRM, but the contact person for Business Partner didn't come. So, when I go to Shopping Cart, the Vendors List don't show any results.
       Version: SRM 7.0
       Any tips?
       Thanks in advance.

    Hello,
    The functionality of BBPGETVD and BBPUPDVD doesn't include the
    replication of contact persons allocated to a vendor.
    The only way to do this is to maintain the assignment manually.
    Concerning this issue please also see the informations of the following
    note (and related notes to it):
    1384267 SRM Business partner field enhancements: Prerequisites
    I hope this helps.
    Kind Regards,
    Edel.

  • Changing Contact person's Work Address to his own Address

    Hi everyone,
    In an Account, I want to change the Work Address of a Contact to his own address.
    By default, the contact's address comes up as the Account's address(which is a known thing).
    How and what should I do so that I can see Contact's own address in the Work Address column in the CONTACTS assignment block in an Account..?
    Please suggest if there is any solution for this.
    Thanks,
    Abhi

    Can anyone please give some suggestion how could this be done??
    Thanks,
    Abhi

  • S-User against Contact Person and installation no in table V_AINSN

    Hi Guru
    1.     We have assigned S-user which belongs to full authorization in SAP portal but when we maintained sap customer numbers in SPRO and choose activity generate sap customer numbers from support portal, the system automatically chose SAP-OSS as default value and when we submitted execute button and waited a minute, we have found that the system only getting SAP customer numbers in which belong to our sap customer number only and when we looked into table V_AINSNRS, we have found only 2  installation number which belong to our company without customer installation number that lead to the var system canu2019t automatically create customer business partner type organization and person when running the standard report.
    Question: What should I do in this scenario ? Please advice
    2.      When we have assigned s users for each message processors and assign to SAP customer no in t-code AISUSER
    Question: Do the s users for each message processors have to create and maintain under our SAP customer number or actual SAP customer number from the customers? Please advice
    Thank you very much
    Edited by: rravikran on Mar 28, 2011 12:39 PM
    Edited by: rravikran on Mar 28, 2011 12:40 PM

    Hi
    while performing the activity  "generate sap customer numbers from support portal" in spro
    have you set the "Generatee all " flag. If you do not set the flag, only the systems of the installations are included which you selected in the maintenance view V_AIINSNRS.
    Please select the flag and try.
    and for the 2nd query,
    "If you manage several SAP customer numbers, and do not have overall (CCC) authorization for them, you must maintain the SAP customernumber for which each S user is authorized. The system can then get the S user for each SAP customer number. Activate the Business Add-In AI_SDK_SP_RFC_RP under the IMG node Several SAP Customer Numbers"
    please check the the docuemt under SPRO ->Select refernece IMG->solution manager->Configuration->basic Settings->Wizard based initial Configuration of initial settings->Soluion Manager->General Configuration->Assign S-user for sap support portal functionality
    read carefully and proceed.
    Thx
    Jansi

  • All my contacts have suddenly disappeared!! I just changed my email exchange details as have changed my company and 5 mins  after that my contacts were all gone.!! am going through messages to understand the contact person and saving numbers.

    I just changed the details of my mail exchange and suddenly after 5 min.s all my contacts are gone??!!!!! I am trying to go through all messages to recognize the people who have sent me their messages.. PLEASE help. How can I get my contacts back??
    I dont really have my backup. The laptop I used to sync with, is with my old company now.
    Cheers,
    Shivani

    I just changed the details of my mail exchange and suddenly after 5 min.s all my contacts are gone??!!!!! I am trying to go through all messages to recognize the people who have sent me their messages.. PLEASE help. How can I get my contacts back??
    I dont really have my backup. The laptop I used to sync with, is with my old company now.
    Cheers,
    Shivani

  • Transfer of Phone no to another person and home

    my Gran who is the account holder is now been taken into a care home, is it possible to transfer Gran number to me, I have a old BT line i n house (with VM at present) but I am not prepared to pay £120,connection fee, can this been done with out the charge. pls can you help.

    You would need to go manually for this , there is no direct way from Muse for this.
    Thanks,
    Sanjit

  • Delivery address and contact person

    Hello,
    Running ECS SRM 5.0
    Business requirement is to have many delivery addresses pr. org unit (which is fine) and a contact person for each of these addresses. How can I enter a contact person on an address or link these?
    rgds
    GAR

    Hi
    This can be possible by SRM Web transaction - BBPMAININT (Edit Business Partners)...
    Have you used USERS_GEN transaction in SRM to create users ? Please read the SAP documentation in this case associated with the transaction using SRM GUI logon..
    Which option do you use in USERS_GEN : file upload ?
    In your case where the "US" (User) link is missing: is the SU01 user created ? Wasn't is already created before USERS_GEN ?
    If the system is not able to create the CP <-> US relation, you should get back an error message in USERS_GEN.
    Please go through the related very helpful pointers ->
    Central Person
    Re: Error while assigning user to a position
    Re: How to assign contact person user id to Vendor uploaded from ECC?
    Re: Central Person already exists
    Re: Correct relationships not being created from USERS_GEN
    Business Partner(BP) and Central Person(CP) distribution
    Contact person of vendors created inconsistently in my organizative structu
    Do let me know.
    Regards
    - Atul

  • Address formats and contact persons

    Hi
    With a number of our customers (not the majority) we have the requirement to have the following address format:
    Company Name
    c/- Contact Person
    Address Line
    Suburb
    City and Zip Code
    Of course we don't want to actually use the contact person field as we don't always want to have contact person in the address for all customers. 
    I would have thought this was quite a standard requirement for most businesses but cannot see a STANDARD solution for it in SBO. 
    Also is there an easy way to hide address fields when they are null as per the unanswered question: /thread/61000 [original link is broken]
    Kind regards
    Andrew

    Thanks Jose
    I was already aware of this functionality.  However, I find this fairly limiting.  I have two questions:
    1)  Can you get blank lines in the standard address format to be skipped?
    For instance if you have a standard address format of:
    STREET
    BLOCK
    CITY
    PROVINCE
    And it is a small town in a province which means you either leave the Block or the City blank then a blank row is shown when the address is printed on the invoice.
    Is there a simply way where if a row is blank then it can be ignored in the address layout?  I notice that there is a line length row but don't know if there is a special code you can enter in there to say skip if blank or something like that - so that it moves onto the next field with data.
    I recognise that you can't strip and rebuild the address fields in the Print Layout Designer but was wanting to know if there was something standard.
    2)  I am not sure how SBO handles mail that is sent c/- a person in a company in terms of standard functionality.
    Cheers
    Andrew

  • How can I delete the home address of the contact person

    Hi Experts,
    I want delete the home address of the contact persons in the ERP.
    Which data and where can you found it:
    In Tx xd02 in the general data of customer - register "contact person" and then button "home address".
    There I want delete all fields. When I looked in F1 - technical information I don't get the information in which table the data are included. I know only the structure.
    I think the general data of the contact person I have to look in the table knvk.
    The private and the business email address I can find in the table ADR6.
    In the table knvk there is a field "address number". I  know when there is a number then the contact person has a home address and when this field is empty then for this contact person isn't maintain a home address.
    Could I delete this field "address number" in the table knvk? Is then the home address automatically deleted?
    I don't know how can I delete this field. Can anybody tell me how can I do this? I looked in the Tx xd99 this field isn't available there.
    Or does anybody know how can I delete the home address of the contact persons on another way?
    Thank you in advance.
    Best regards, Jasmin

    Hi,
    I am sorry, I forgot to say I don't want delete only one home address. Yes, you are right, then I could delete it manually.
    But I want to delete all private addresses, so I should have a tool for mass deletion.
    Does anybody know how can I do this?
    Best regards, Jasmin

  • No address data found in contact person

    Hi all
    I am getting an error while creating a transaction No address data  in the contact person.
    I am able to see the bp id of the contact person.
    I have maintained the first name and last name  and other details including the standard address in that bp.
    Kindly let me know from where the system picks the address and where do i maintain that.
    Thanks in advance
    Kumar Hari

    Hello,
    This is a common mistake when processing Contact Persons. In fact, the address data you see in the WebUI for your contact person is the address of the Company - Contact Person relationship and not the contact data of the contact person itself. The error message is probably referring to the address data of the person itself.
    Eg I work for my company, my address data as a contact person for my company will the the company's address, fax, e-mail, ... Beside that I also have my personal address, where I actually live with a private e-mail and so on.
    My company -_-_-_ has the contact person  -
    > Me
    Address data         (=address data eq to comp)       My personal address
    Hope this helps,
    Joost

  • Contact Person address Data not found

    Hi All,
    I am finding an strange error in Partner determination process for Contact Person.
    System is able to pick the contact person, but it always says no address data found for contact person. I had checked all config in partner dtermination procedure and can see that all setting related to address detremination is available. But still i am not able to get this data in my transaction for activity/lead or contract.
    Please suggest.

    Hello,
    This is a common mistake when processing Contact Persons. In fact, the address data you see in the WebUI for your contact person is the address of the Company - Contact Person relationship and not the contact data of the contact person itself. The error message is probably referring to the address data of the person itself.
    Eg I work for my company, my address data as a contact person for my company will the the company's address, fax, e-mail, ... Beside that I also have my personal address, where I actually live with a private e-mail and so on.
    My company -_-_-_ has the contact person  -
    > Me
    Address data         (=address data eq to comp)       My personal address
    Hope this helps,
    Joost

Maybe you are looking for