Contact persons which are created in ECC but not replicated as employee

Dear Experts,
Where can i find the contact persons which are created in ECC but not replicated as employee in the CRM.
For example i created the 10000 personal no in that 800 should replicate to the CRM from ECC but only 600 is replicated and remaining 200 i have to find in the ECC to replicate again running PFAL.
If i have to down lode and compare in excel please provide the details. in which tables i have to down load in ECC and CRM which what input.
Best Regards,
Siva Anjith

Dear Gurus,
Can you please help to resolve my replication issue.
Best Regards,
Siva Anjith

Similar Messages

Active Directory User which can Create a User but not Allowed to Enable Disabled Users

Hi Guys, we have a requirement to create a User Group in Active Directory which will grant its members permission to 'Create Users' but not be allowed to 'Enable' 'Disabled Users'.
We have tried delegating control and assigning permissions by going to 'Security Tab>Advanced'.
It seems like when a group is granted permission to create users, it will also be allowed to enable, disabled users.
Kindly advise if it is possible to create a user group with permissions to 'Create Users' but not be allowed to 'Enable', 'Disabled Users'.

Hi,
According to my experience, you can assign permission with create/delete user objects. If you want to disable/enbale
a user, you must be a member of the Account Operators group, Domain Admins group, or the Enterprise Admins group in Active Directory, or you must have been delegated the appropriate authority.
In general, if you just give a user group the permission to create user objects, it cannot disable or enable user accounts. Please make sure that the permission you assigned is correct and the
user group are not the member of Account Operators group, Domain Admins group, or the Enterprise Admins group in Active Directory.
Best regards,
Susie

Linn kinsky does not show all music folders - only the one which was created with wma but not the flac files wich where created with winamp

Who can give me advice - do i have to change settings in i pod touch or in the folders from my computer ?

Linn Kinsky is a app which helps you to control your LINN audio - streamer
This Kinsky programm is available for computers and apple products as well. So the Kinsky programm runs perfectly on my windos computer and after reading articles i decided to purchase a more handy ipod touch to control my audio-streamer instead of using the notebook.
unfortunately wma files are shown only. Meanwhile i ripped some cds as AIFF because I expected the problem here but nothing has changed.
Anyway thanks for your answer Matthias

OBIEE 11g - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.

OBIEE 11g - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.
Appreciated if you could able to help as soon as possible as I don' have back up for these disappeared reports.
Pleas let me know if any additional information needed.

Hi
Thank you for the reply.
Here one thing I would need to mention that those are created by me on last week, but when I check those today, I could not able to see or even admin also not able to see those. For sure no migration and updations happend over the week end, really not able to debug whats the issue around. Unfortunately I haven't taken back up as well.
Please could you help and let me know whats the root cause and how I could able to restore.
Best regards,
Kumar

Why we cannot view the move orders which are created by the other user?

Hi,
Can any one explain me the below point.
Why we cannot view the move orders which are created by the other user.
Ex: From ABC user I have created a Move Order: 123456 in M1 Org If I login to the other user BCD I cannot view the same move order in the same ORG i..e M1 ORG.
But we can perform the transact move orders for move orders which is created by the other user.
What could be the reason? Why the system is restricting this? Is this the standard functionality of oracle?
Can any one explain?
Regards,
Kv.

This is due to a security function which allows to see the move orders created by the user only.
Please refer to the meta link document ID 280131.1 for detailed description.
I have tried these steps in one of my test instances long back and was able to see move orders created by other users.
Thanks
Karthik.

I have deleted some photos from camera roll which are taken by today but my icloud is bacuped on yesterday night.how can i get those photos.please anyone tell me because they are very important

I have deleted some photos from camera roll which are taken by today but my icloud is bacuped on yesterday night.how can i get those photos.please anyone tell me because they are very important

Are those photos on PhotoStream?

How to delete all TABLEs in Schema SYS which are created since 09:15?

Unfortunately a script created lots of tables in the wrong Tablespace (=SYSTEM) and Schema (=SYS).
How can I delete (in one DDL command) all TABLES which are created inTablespace=SYSTEM and SCHEMA=SYS
during the last 3 hours resp. since 09:15 of 25th Sep 2011 ?
Alternatively: How can I move these TABLEs to another Schema (e.g. ATEST) and Tablespace (USERS)?
Is this possible with Oracle XE or only with Oracle Enterprise?
Peter

user559463 wrote:
Unfortunately a script created lots of tables in the wrong Tablespace (=SYSTEM) and Schema (=SYS).
How can I delete (in one DDL command) all TABLES which are created inTablespace=SYSTEM and SCHEMA=SYS
during the last 3 hours resp. since 09:15 of 25th Sep 2011 ?
Alternatively: How can I move these TABLEs to another Schema (e.g. ATEST) and Tablespace (USERS)?
Is this possible with Oracle XE or only with Oracle Enterprise?
PeterYou can query dba_objects and join it with dba_tables where tablespace_name='SYSTEM' , then drop the tables result of the query; the idea is to use the following query;
SQL> select OWNER, OBJECT_NAME from dba_objects where OBJECT_TYPE='TABLE' and OWNER = 'SYS' and CREATED >= sysdate - 3 / 24;Please consider marking your questions as answered, when it is the case;
Handle:      user559463
Status Level:      Newbie
Registered:      Feb 18, 2007
Total Posts:      583
Total Questions:      266 (186 unresolved)Edited by: orawiss on Sep 26, 2011 4:03 PM

Where to see activities, which are created for the campaign with target group

Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
Hamid

Hello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes

Status are "open" in CRM but not same shown in replicated sales Doc.

Dear Experts,
Status are "open" in CRM but not same shown in replicated sales Doc ( R/3 ). please suggest with optimal solution.
Regards,
Sany

Hi Sai,
Thanks for your response, I am using PFAL transaction to transfer the employees from ECC to CRM. and I am using only one emplyee for execution, is there any other transactions to replicate employees.
In ECC, after executing the PFAL transaction, getting successful transfer of IDoc message with green light.
In CRM in WE02, it is showing yellow light for the same IDocs.
but even with yellow light (Warning) some employees are successfully converting into BPs, but some employees are not converting.
I could not trace the problem that, why it is happening. IDocs are reaching to CRM system, but some idocs are not converting into BP where as some IDocs are converting into BPs successfully.
Please help me to resolve this issue.
Your suggestions will be highly appreciated.
Best regard
Raghu ram

I have sent an attachment on my imac but the person receiving it can open it but not print it

I have sent an attachment on my imac (via email) the person receiving it can open it but not print it, any ideas !!

Not sure will check tomorrow. I think the attachment was sent via pages or word. It also depends which device I send it from depending on if it can be printed. Sent a copy to my work computer (windows vista) and it opened and printed no problem

WMI Objects Created By FEP But Not SCEP

We're moving from FEP to SCEP (2012 R2) in a server environment. Manual install using scepinstall.exe (v4.5.216.0), configuation via GPOs, monitoring via SCOM. No SCCM.
I've found that the following WMI objects, which are created when FEP is installed, are not created when SCEP is installed:
* Root\Microsoft\PolicyPlatform namespace
* Root\Microsoft\PolicyPlatform\WindowsFirewallConfiguration namespace (of course)
* FirewallState class in Root\Microsoft\SecurityClient
The MOF files which define these objects were installed by SCEP to C:\Program Files\Microsoft Security Client, and manually compiling them via mofcomp.exe appears to work fine. Bug? By design? Am I missing something?
(The WMI objects are retained on a FEP-to-SCEP "upgrade." It's only for newly built systems which have only had SCEP installed that the WMI objects are missing.)
Thanks,
Mark

In the SMSSETUP\CLIENT\<arch> folder on the SCCM 2012 R2 media, there's a WindowsFirewallConfigurationProvider.msi. The MSI installs to "C:\Program Files\Windows Firewall Configuration Provider" and contains the same FirewallConfiguration*.mof
files as "C:\Program Files\Security Client." Just with slightly different names and one or two minor textual differences. It also contains a version of WindowsFirewallConfigurationProvider.dll which is older than the one (currently)
in C:\Program Files\Security Client. Doesn't make a lot of sense to me.
Mark

HT201269 My Ringtones are in my Purchases, but not on iTunes download?

My Ringtones are in my Purchases, but not on iTunes download, and don't appear in Tones?

I know that there is a way to go into my ipod files and pull out all of the songs as I have done it before. Would it work to create a new library, pull all of the ipod music files into it, and then match that to my current iTunes match account? Also, do you know, if I do that am I starting the entire match process over again or will Match recognize the files that it has already matched from my previous librarly? If I have to start the entire process over again, I might reconsider as it has taken FOREVER due to my ISP.
Thanks again for your help and input.

How to use the dll created by c++ but not write a jni wrapper around

how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

Your question is unclear. (You haven't said what dll you are talking about.)
But:
If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

Email Alerts are working for some but not all users

If some users are getting the alerts and some not, it seems more likely that the issue is with your email server or email clients, not with your SW setup.
Have you checked SPAM / Junk folders on the server and on the clients?

We have alerts setup for multiple scenarios. All of our users are setup the same but not everyone is getting the alert. We are using the spiceworks mail servers and I have checked the Spiceworks App Notifications are set to Yes. Any ideas?
This topic first appeared in the Spiceworks Community

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

Contact persons which are created in ECC but not replicated as employee

Similar Messages

Maybe you are looking for