Contact ringtones don't work after changing main ringtone

It's a minor problem -- which is great! -- but I'd like to resolve it if possible.
I assign a ringtone to a contact.
It works.
I change the main ringtone.
When contact calls me, their ringtone doesn't sound. The new main one does.
I have to go into each contact with a separate ringtone and reselect it for it to work again.
Any ideas?

Yes, you can change the default without effecting the personal ringtones.
If you are using an App to download and store ringtones, you should access 'Files' when changing a ringtone rather than the App or the installed ringtones.

Similar Messages

Vacation Messages Don't Work After Changing Password

I have a Snow Leopard Server (10.6.2) setup and the vacation message feature works fine as long as the user hasn't changed their password. Once they have changed their password then the feature doesn't work. You can set it up but it doesn't work, when you send an email to the user with the message set the email sends but you don't get the vacation message.
I have also noticed that when you try and load the server side mail rules for a user that has changed their password you get an error (from memory it's something about can't get info from server).
Does anyone know why this might happen.
Thanks

There is a one-response-per-day limit imposed by mailsieve and dovecot. Once a vacation response has been sent to any address, it'll throttle any future responses for 24 hours to the same address.
Once you change the password, are you either using the same address to send e-mail as before? Have you tried triggering the vacation notice from a different sender address?
A.

I can not get my mouse to work after changing the batteries

I can not get my wireless mouse to work after changing the batteries

Some ‘dumb’ questions just so we don’t assume what you have done:
Batteries installed with both + poles pointing to the top as you hold the mouse?
Mouse switch has been returned to the ‘on’ position - do you see a green light? First it will be solid green and then flashing green as the mouse tries to pair with the computer.
Try clicking the mouse a few times as it’s trying to pair.
If you don’t see a green light, try wiping off all battery contacts and reinserting the batteries. If still no green light and the mouse switch is ‘on’, are these old rechargeable batteries that been recharged many times or are they fresh normal batteries (not rechargeable batteries)?

Since upgrade my ringtones don't work

ringtones don't work on my iPhone since upgrade. It shows them on my contacts, but I get normal ring when I get a call.

hello, make sure your ringtones are still in your itunes library under the "ringtones" area.
Then if they are in your library, try dragging them again to your phone... especially if you are missing you music too!
That should fix it!
For some reason, some of the music/ringtones ddn't make it on the upgrade of iOS 5.
Good luck!

Macbook pro 13inch,mid2010 qwertyu keys don't work after upgrade os x Yosemite

macbook pro 13inch,mid2010 qwertyu keys don't work after I upgrade os x 10.10 Yosemite. but it works on keyboard viewer. I'm not sure if it's hardware or software problem, how can I fix it?

Hello there, kipolo.
Great job using the Keyboard viewer to troubleshoot your issue so far. The following Knowledge Base article provides a great checklists of steps to pinpoint the issue a bit further:
One or more keys on the keyboard do not respond - Apple Support
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Buit in ethernet don't work after installing Lion

Built in ethernet don't work after installing OSX 10.7 on my MacBookPro 2.4 Ghz Intel Core 15.
Someone else has the same problem?
On my MacPro 2 x 2.6 GHz Dual-Core Intel Xeon it's not working good, i have to do a restart to get internet connection.
Is there somebody who has te same problem and has a solution?

Something does look odd to me unless it's a typo in your post.
This look like what I'd expect from the NetGear Router - not form the modem. That is when You browse the router stats (http:/192.168.1.1)
I work with a modem with te folowing preverences:
Wan IP address    87.211.205.210
Lan IP address     192.168.1.1
Primery DNS server       62.58.50.5
Secondary DNS server   62.58.50.6
and a separate router Netgear WGT624v3
This is not exactly what I would expect from System Preferences/Network
the system preferences for the network are
Configure       by DHCP
IP address     192.168.1.15
Subnetmask 255.255.255.0
Router           192.168.5.1 <<<<<<<<<<< this should be 192.168.1.1??????
DNS              208.67.222.222
                     208.67.220.220
The Router address in System Preferences/Network should be the same as the LAN IP Address. In this case it's on a different network.
If this is not a type then this is a problem!
Not sure how it got to be that way.
Does it persist when resetting the modemand router?/
Steve

IPhone 3GS apps don't work after 4.3 upgrade

Some apps like mail, safari, app store, ipod don't work after upgrading to iOS 4.3. itues is up to date and have never had issues before. tried to downgrade to 4.2 but was unable to. Help!

I have the same issue, half the apps no longer work, just stays in 'updating' mode. I've tried uninstalling some but now the app store is freezing. THe ones I am able to reinstall give me error message saying I'm not logging in correctly (I am). I'm guessing some apps versions aren't compatible with the new software but a few I was able to use after the software update and now I can't

All Mac apps don't work after cloning on new hd.

All Mac apps don't work after cloning on new hd.
I used CCC to clone 10.6.8 then onto new drive. Everything works BUT all Mac apps.
Error: You can't open the app(s) because it is not supported on this type of Mac. (On MacBook 2011)
Thanks for your help.

All good. Just drag and dropped each application and they worked until I did a restart. Then repaired permissions and everything works.

My apps don't work after synching music files from my PC

My apps don't work after synching music files from my PC through Itunes....though all the apps are shown in the Apps window in Itunes (The Apps match the iTunes account on the iPhone).....
Disconnecting after the sync and After downloading any app from Appstore through Wi-Fi all my apps start working.....
Please Help.....

What happend is your phone forgot it was authorized to work with items associated with your apple id. If it happens again, download any free app to prompt the sign in, once you install the free app the others should work.

Card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej

card reader don't work after installing win 7 ultimate on pavilion dv-6 1260ej.
Tried downloading this driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75456-1&cc=il&dlc=he&lc=he&...
still dont work.

Hi,
Download and install the Chipset driver on the link below.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45041.exe
After the installation has completed, restart the notebook.
Next, download and install the Card Reader driver on the following link.
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45046.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My ipod shuffle (4th gen) don't works after hard reset with itunes

My ipod shuffle (4th gen) don't works after hard reset with itunes, it don't reads too like USB by Windows.
Before that i've seen error (-50) in iTunes, so i reset ipod.
I've read all tips on this site, but nothing helps me.

No, USB works good. I've tried reset on my friend's PC, and it saw my ipod and reset was done. But when i tried to load music, it wrote me, that i've installed incorrect software.

PL/SQL don't work after install Oracle 9204 patch set

I'm using Oracle 9.2.0.1.
some pl/sql don't work after i install database patch set 3 (9.2.0.4).
code--------------------------------
BEGIN
dbms_aqadm.stop_queue(
queue_name => 'WB_RT_SERVICE_QUEUE');
exception
when others
then
null;
END;
error message is: ora-03113 end-of-files on communication channel.
please help. thank you !!

Can you please tell me the soluation of this problem as I am also facing the similar problem ?
Thanks in advacne ?
Regards
Satpal

Webmail in Safari don't work after updating to iOS6.

Webmail in Safari don't work after updating to iOS6. Logging on to office webmail account are redirected. Webmail works with Google Chrome, but it doesn't sove the issue with Safari. Any suggestions on how to configure Safari?

Try this
I was having this problem, seem to happen when waking computer, once finally connected network works great.
You need to edit your network preferences to order the network selection list. Goto this support page Using network locations (Mac OS X v10.6 and later) and edit your selection list.
I also created a "HOME" location and deleted all networks except wifi. Put MB to sleep woke and safari worked great. Still I re-ordered the networks under Automatic putting wifi at top, sequence is from top down. Don't forget to click Apply. Have fun

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

Contact ringtones don't work after changing main ringtone

Similar Messages

Maybe you are looking for