Contact showing online when they are offline

Same problem. Maybe it is depending on version/OS running.The situation is as follows: Using Skype (last version) simultaneously on laptop, running Ubuntu Raring, and tablet PC, running Android 4.2.2. Skype is switched on on both machines, but active contacts differ - three of my contacts are seen as offline on the Android, and are unaccesible. At the laptop more people are activeAt the same time I just did a Video Call with one of them on the PC/Ubuntu. The other person is running Skype on his I-pad. Another of them is running Skype on his Android phone (Samsung Galaxy S? - not sure about the exact model).Please helpPS Uninstall and reinstall Skype changed nothing. Changing the status to offline and back to online caused one conact to appear, but the other, running iOS did't change

Here's the reality of this PROBLEM. It has nothing to do with your software on your phones or tablets! Even when your friend powers right down (phone or tablet not even on) and/or disconnects from the net, you still can see them on line. You can completely exist Skype and remove it from memory totally (so that none of its services are running) and when you log back on, you see your friend show as on line again, even though their phone/tabelet is powered right off. THIS IS A SERVER PROBLEM ON SKYPE'S SIDE! When you log off, or better, completely power down, Skype's servers are not polling your device properly and logging off the server-side account. As an example, when I Log off Skpe then power down, the server SHOULD also disconnect the session.  But it's not. Also, the server software should check all "active" connections periodically and poll the device to confirm it's actually even on line (the entire device and the Skype client).  Again, it's not doing that or if it is, it's not doing it correctly. In my case, we have 2 smart phones (both brand new).  I use my phone all day long.  The other phone, is used from about 3.40pm to about 4.30 pm and then powered down. Yet, like this morning, when I go into MY phone and into Skype (logging on), I can see that no one is connected.... then the "Echo / Sound Test Service" becomes available (green dot) as it should, showing me that I am connected to the net, but then, our other connection also pops up with the green dot showing on line.  The other phone is not even powered on. The server did not release the session, even over night. The other problem I'm seeing is that Skype is VERY VERY VERY unstable!!!  I honestly HATE IT!   Like yesterday, and everyday, actually, both phones are on the net and skype is logged on.  On each phone, we see the green dot for each other.  That SHOULD mean that we are both connected to Skype's server. Yet, when one tries to call the other, it just rings and rings (video), but on the other phone Skype never sees the incoming call!!! We've done this standing side by side.  Yesterday in fact. So then, we ended that "call" and tried from the other phone to mine.  This time, it worked. So then, we tried again from my phone to the other phone and that now worked. After that, we powered down both phones and then I powered up mine. Yup, the session of the other phone still has green dot.  And NO, there's not a Skype service running.   I'm a Certified Computer Tech and control what's going on with our equipment. As this thread has been going on for over 1 year, it's clear that Skype either doesn't give a rat's petutie or has no clue how to fix this problem. I've hated Skype for a long time because I find their software and system so unstable.  I had hoped that by now they would have figured things out.  Which is why I installed Skype on the 2 new smart phones.  Clearly, I was wrong. It's time to see what other options are out there that actually work. So ya'll can stop believing that the problem is on your phone... it's not! (well, as far as the server session staying active).    

Similar Messages

  • Skype contact showing online when offline?

    One of my contacts is being shown online but in reality they are offline. How is this even possible and is there a way to fix it? I'm running the newest version of Skype and I've tried re-installing it many times but it just keeps doing the same thing :S 
     Also, when I try sending them a message when they are online the message just goes to pending and never sends. 

    There are 2 issues here which may be related, they may not be. I was only commenting on the first which is the apparently 'incorrect' status showing. That has been the case for mobile devices for quite a while ... maybe from when the functionality to identify mobile devices was introduced into Skype for Windows.
    If the problem of not being able to send messages is only affecting one of your contacts, it makes me wonder whether the problem is with their account.
    You say the problem started "randomly". Does that mean that sometimes you can send to that contact and sometimes you can't? Or it always affects that person but nobody else which makes it feel 'random'?

  • Showing my contacts as online when they're NOT

    It's really getting into my nerves. My contact has his skype automatically answering calls from me so I can can call him even when he's sleeping without disturbing him because our skype calls always get cut after a few minutes. This has happened all the time before, it always shows that he's online even when he's not! When I call, the voice message shows up and it's getting pretty annoying. I found a solution before, I quit skype and open it again. or I look at my iPhone's skype because it USED to show if someone really is online or offline, or I sign out on skype and sign in again, or I even turn off my wifi and turn it on again. I even changed my laptop from the Microsoft Surface 2 to an Apple Macbook Air because I thought the Surface 2 was the problem. BUT NO. SKYPE WAS THE PROBLEM. I did all 4 methods even when they're really annoying to do, and they worked fine for a few days, BUT NOW THEY DON'T DO SH**. I looked at my phone's skype, logged out my phone's skype and logged in again, logged out my laptop's skype and logged in again, turned off my wifi and turned it on again, quit my laptop's skype and open it again, and again and again and again! Note that everytime I do each method, I try to call him incase he's online, but that FFFFFing video message thing shows up EACH TIME. 
    I'm seriously pissed off. Skype was the only thing connecting us because we're in a long distance relationship. Skype isn't helping at all. I am on the verge of switching from this crap to Viber because I heard viber was WAY BETTER. Fix this man. Uggghhhh!!

    Hi Daniel:
    Try this:
    Complete the following steps to enable presence in Microsoft Outlook for individual users with the Active Directory User and Computers administrative tool:
    Step 1       Start the Active Directory User and Computers administrative tool. You must have administrator permissions to run the Active Directory User and Computers administrative tool.
    Step 2       Select View in the menu bar and then select the Advanced Features option from the drop-down list.
    Step 3       Navigate to the appropriate user in the Active Directory User and Computers administrative tool.
    Step 4       Double click the user to open the Properties dialog box.
    Step 5       Select the Attribute Editor tab.
    Step 6       Locate and select the proxyAddresses attribute in the Attributes list box.
    Step 7       Select Edit to open the Multi-valued String Editor dialog box.
    Step 8       In the Value to add text box, specify the following value: SIP:user@cupdomain.
    For example, SIP:[email protected]
    Where the user@cupdomain value is the user's instant messaging address. cupdomain corresponds to the domain for Cisco Unified Presence or Cisco Unified Communications IM and Presence.

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • When i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

    when i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Required queries to start services when they are in offline

    two node rac
    10.2.0.4
    windows
    asm(to prepare document)
    when services went offline to start the services i got below command
    To start, stop and manage services
    srvctl status service -d dbname
    srvctl config service -d dbname
    srvctl start service -d dbname -s servicename
    srvctl stop service -d dbname -s servicename
    Check Oracle Listener on nodes
    $ srvctl config listener -n orarac1
    orarac1 LISTENER_ORARAC1
    $ lsnrctl start LISTENER_ORARAC1
    please let me know for other services
    to start other services with crsctl and also if any queries can you list out pls one by one
    thanks..............you can check the services belwo
    D:\oracle\product\10.2.0\crs_home\BIN>crs_stat
    NAME=ora.info-iww-com-06.ASM1.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.LISTENER_INFO-IWW-COM-06.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-07.ASM2.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.LISTENER_INFO-IWW-COM-07.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.OSOD.cs
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.OSOD.osondemand1.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.OSOD.osondemand2.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.db
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osod_srv.cs
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osod_srv.osondemand1.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osod_srv.osondemand2.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.osondemand1.inst
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osondemand2.inst
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.osservice.cs
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osservice.osondemand1.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osservice.osondemand2.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07

    aman before i had services offline
    i used some crs_start commands
    i am not familar which command for which service i am only familar with few ,which i have listed above
    to make document for safe side....................as oracle insited when services are offline please start manually
    to start manually i am preparing document
    can you please provide each srvctl command and crsctl command to make service online.
    just i need is for above services when they come offline to come online what commands to use(srvctl and crsctl)
    thanks for help

  • I use an iphone 5 ..my problem is whenevr i set a picture of my contacts in their contacts info..the picture never shows up when they call me..i even added my country code to their no. but it still didnt solve the problem..so wat shud i do now?

    I use an iphone 5 ..my problem is whenevr i set a picture of my contacts in their contacts info..the picture never shows up when they call me..i even added my country code to their no. but it still didnt solve the problem..so wat shud i do now?

    Do you see your contact's number?
    What carrier are you using?

  • I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually.

    I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!

    Have you tried deleting the songs from Settings?
    Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

  • How can I watch my tv shows when they are in the cloud and I am not near wifi?

    I can't watch my tv shows on my phone when they are in the cloud and I am not near wifi.  How can I get them out of the cloud?

    You have to download them or sync them to your phone ahead of time.

  • I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

    I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
    After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
    How to pair show in a certain order, for example, sorted by name.
    grateful
    Julio Cesar

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • How do I show the details of a customer when they are logged in a secure zone?

    How do I show the details of a customer when they are logged in a secure zone?
    I want to show the customer details as well as some customer CRM fields that are applied to the customer. None of these are entered via a form, they would be entered by the client. The customer would need to be able to log in to view the information and get an email alert when it is updated. Help!?

    Hi,
    You might want to look into customer service zones which allows customers once logged in to see their case, order and own details. 
    - http://kb.worldsecuresystems.com/133/bc_133.html
    - http://kb.worldsecuresystems.com/kb/customer-service-area-orders.html
    - http://kb.worldsecuresystems.com/kb/allowing-customers-view-update-crm.html
    Kind regards,
    -Sidney

  • Bridge CS3 shows different colour on previews when they are selected

    LS,
    Problem, all of a sudden: Bridge CS3 shows different colours on previews when they are clicked and selected. At first, they are ok, they look the same as they are on camera. When I click an image and select it, it looks like there's a colour profile being applied to it, making the colours dull, its also pulls back the contrast of the image. Can this be corrected in prefences or something? So that the previews are the same as non corrected raw processed files?
    David

    Oh, good grief…  Sorry.  I forgot you haven't updated yet.  My bad.  
    In CS3 you'll find the Auto Tone adjustments in the Camera Raw preferences, and the use of high quality in Bridge preferences.  You won't have all the options available in CS4.
    If you are shooting raw, the upgrade to CS4 just to be able to use ACR 5.3 (and now 5.4) is a no-brainer.  Well worth the money.
    If you don't upgrade, you'll be leaving a lot of raw image quality on the table, as Jeff Schewe says. ACR 4.6 is light years behind 5.3 and 5.4.
    In addition, Bridge 2.x (CS3) is easily the worst piece of software ever released by Adobe or any other major software developer.  It should have been fixed for free by Adobe, but shamefully, it wasn't.  I would not hesitate to call it an unusable, worthless piece of cr@p.  Fortunately Bridge 3.x (CS4) is much better.
    However, I repeat:  What you are seeing is perfectly normal, expected behavior.
    Message was edited by: Ramón G Castañeda

  • WOT and Webutation is showing as disabled when they are not

    WOT and Webutation is showing as disabled when they are not .The icons show,but no color on icons. Says WOT is disabled when its not. Also the same on Webutation. Tried uninstalling then reinstalled both and the same thing happened. Tried Wot on another users account and theirs work. Can someone help me on these issues?

    capaho wrote:
    That's like saying a boat is an airplane because it's not a car.
    SMH
    In other words, how does your explanation account for ED (enhanced definition)?
    ED is generally considered to be 576p or 480p, but this is not universally accepted and these resolutions are often accepted as HD also. Additionally an ED signal uses non square pixels just as SD does so the horizontal pixel dimensions should be no more than 720. Exactly how the tv would treat these resolutions I don't know (yet).
    If you have a copy of the source code for the function that displays the HD icon, please post it so I can take a look at it.
    Why should I have such a copy and why is it relevant. The issue here is that the OP believes his video is incorrectly labelled HD which is not the case. There may or may not be anomalies in the way the tv attributes the HD label to some files (although it isn't the case for me), however the OP has incorrectly converted his source video and they are no longer SD, they are also not ED by whichever definition you wish to apply and any such anomalies should they exist are not responsible for the OP's files being labelled HD.

  • When I try to view my photos it says they are offline.

    When I try to open my pictures it says they are offline, how do I correct this?

    You could also try the following so see if you can recover your photos.  If they are in the Masters or Original folder of your library but can't be recovered by the conventional rebuild/repair procedures perhaps this method will get them for you.
    Starting over from scratch with new library
    Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
    1. Open the library package like this.
    2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
    3. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window.
    This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
    Note:  your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • HT204150 I deleted my duplicate contacts one by one on my iPad but have lost over 600 contacts on my iPad they are all on my iPhone but when I sync my iCloud I only have 200 contact on my iPad but have all 820 on my iPhone can any one help

    I deleted my duplicate contacts one by one on my iPad but have lost over 600 contacts on my iPad they are all on my iPhone but when I sync my iCloud I only have 200 contact on my iPad but have all 820 on my iPhone can any one help

    Welcome to the Apple Community.
    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Maybe you are looking for

  • Lines in a Illustrator-created PDF

    I am having issues when some people print a PDF I created from Illustrator. It looks like the border around the page is going through the page diagonally. It does not appear like this when viewed as a PDF. This is a multi-page printout tiled 5 pages

  • I have installed flash player on my imac but it won't work?

    flash player will not work after i installed it on my imac?

  • Jca adapter in SOA & OSB

    HI, iam new to OSB .For file,ftp,jms,db adapters can be integrate in SOA & as well as in OSB also(as Protocols) in which scenario we will  go for SOA in which scenario we will go for OSB.,if we use both technologies in one project. Any one can provid

  • Master data transport steps

    Hi expert, What will be the steps to transport master data in BI 7? I have transported relevant R/3 data source and then replicated data source in BW. Then I start collecting BW info objects for the master data. When collecting BW info objects for tr

  • Average Based on 12 months

    I am trying to calculate an average rate base on 12-month income and working days. However, due to the calculation method is different historically, part of the 12-month income and working days need to be manually input. I cumulated the manual input