Contact Widget not allowing message to be left

Hi,
I am new to this, all seems to be going well except I have added the Contact form widget which includes the Message box with multiline reply. When I publish the site I am unable to enter information into that box. ANy ideas why?
CHeers.

Note that it's not allowing to enter the verification code and to use the submit button as well.
The most probably reason behind the issue is that some component (an image frame, or a rectangle or any other component or frame), is overlapping that part of the form. Please open this page in Muse in the design mode, and then look for the overlapping component. You may also want to "Select All" in that page and look for the same. Once located, remove it and republish the site, and that should resolve the issue.
Hope this helps.
Cheers
Parikshit

Similar Messages

  • HTTP Connection to ABAP System - Query String Not Allowed message

    Hi All,
    We are trying to create HTTP Connection to ABAP System on a SAP ECC system.
    Following entries are added
    1 Connection Type: H
    2 Target Host: Host name
    3 Service Number: HTTP Port name
    4 Path Prefix: /sap/XI/engine/?type=entry
    It is not allowing me to enter Path prefix as "/sap/XI/engine/?type=entry". It is throwing a warning message as "Query String Not Allowed message".
    As per the documentation it is mentioned that -<b> If the system displays the Query String Not Allowed message, you can ignore it.</b>
    It is not allowing me to save the entries succesfully . I need to remove the path refix entry then only i am able to save other wise it is not allowing me to proceed at all.
    Please let me know what entry i can put for the same or let me know how can i ignore and proceed by saving the path prefix as "/sap/XI/engine/?type=entry".
    Please provide your valuable help on this.
    Regards,
    Nanda

    Hi Aamir ,
    Thanks for the response.
    Tried both but still same issue .
    Any more inputs .
    Cheers,
    Nanda

  • HT4623 is anyone else having problems with receiving and sending text messages. most people in my contacts are not getting messages that i send to them.

    is anyone else experiencing problems with (SMS) text messaging. Most all of my daily contacts dont receive my messages.

    Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.

  • Note : Content Not Allowed Message

    I am trying to post a message regarding a problem I have with windows 7 and Reports builder dates formats. I keep getting "content not allowed"?????

    Thanks for the encouragement to persevere . . .
    the culprit was:
    f<colon>facetapparently an eff cannot appear alone or followed by a colon
    Edited by: lili5059 on Feb 27, 2011 2:40 PM

  • BAPI uppload to FB01 giving "Period not allowed" message

    Hi !
    As Im trying to upload FB01 with data through csv file I am getting the following messge , even when the file has the correct information to be uploaded.
    Message:
    Line          1    Error in document: BKPFF $ DEV010
    Line          1    Period  is not allowed
    The file that Im uploading is:
    09042009;KR;2000;09242009;;USD;151278;001096;31;924831;11331.4;Z005;09042009;A;210903;40;3998;11331.5;1;EA;054;730019;730019
    09082009;KR;2000;09242009;;USD;151298;001096;31;924831;11564.6;Z005;09082009;A;210918;40;3998;11564.6;1;EA;055;730019;730019
    Could anyone please guide me as to what does this message indicate and where the problem could be in my program or the file.
    Thanks

    clear wa_ap.
        wa_ap-itemno_acc         = 1.                  "Item No
        wa_ap-vendor_no         = tw_upload-newko.              "Vendor Account no
        wa_ap-item_text          = tw_upload-sgtxt.
        APPEND wa_ap TO ta_ap.
        CLEAR wa_gl.
        wa_gl-itemno_acc         = 2.                  "Item No
        wa_gl-gl_account         = tw_upload-newko_2.              "General Ledger Account
        wa_gl-item_text          = tw_upload-sgtxt_2.
        wa_gl-fis_period         = tw_upload-monat.
        wa_gl-pstng_date         = wa_header-pstng_date.
        wa_gl-costcenter         = tw_upload-kostl.              "Cost Center
        wa_gl-profit_ctr         = tw_upload-prctr.              "Profit Center
        APPEND wa_gl TO ta_gl.
        CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
          EXPORTING
            documentheader          = wa_header
          TABLES
             accountgl      = ta_gl
             currencyamount = ta_curr
             return         = ta_return.
    id          TYPE i,                 
            bldat(8)    TYPE c,                  
            blart       LIKE bkpf-blart,         
            bukrs       LIKE bkpf-bukrs,         
            budat(8)    TYPE c,                  
            waers       LIKE bkpf-waers,        
            xblnr       LIKE bkpf-xblnr,         
            bktxt       LIKE bkpf-bktxt,         
            newbs       LIKE rf05a-newbs,        
            newko       LIKE bseg-hkont,         
            wrbtr(15)   TYPE c,                  
            zterm       LIKE bseg-zterm,        
             zfbdt(8)    TYPE c,                  
            zlsch       LIKE bseg-zlsch,         
            sgtxt       LIKE bseg-sgtxt,         
            newbs_2     LIKE rf05a-newbs,        
            newko_2     LIKE bseg-hkont,         
            wrbtr_2(15) TYPE c,                  
            menge(16)   TYPE c,                  
            meins       LIKE bseg-meins,         
            sgtxt_2     LIKE bseg-sgtxt,         
            kostl       LIKE cobl-kostl,         
            prctr       LIKE cobl-prctr, 
    file:
    09042009;KR;2000;09242009;;USD;151278;001096;31;924831;11331.4;Z005;09042009;A;210903;40;3998;11331.5;1;EA;054;730019;730019
    09082009;KR;2000;09242009;;USD;151298;001096;31;924831;11564.6;Z005;09082009;A;210918;40;3998;11564.6;1;EA;055;730019;730019
    Thanks
    Edited by: Aarav  Agnihotri on Nov 18, 2009 10:30 PM

  • Contacts Widget not functioning properly

    A search of contacts in the dashboard contacts widget returns no matching contacts even though the searched contacts are available in the main contacts application. I think i may have denied the widget access to my contacts list. Is there a way to turn it back on and functioning again?

    Once you Open System Preferences > Security and Privacy > Privacy > Contacts and press Dashboard.
    Check or uncheck the Dashboard box, and then choose "Quit Now". Depending on whether it was checked or unchecked originally, you want to end up with it checked. Once you check it and choose "Quit Now", it should work in Dashboard.
    I don't know what they mean by "Quit Now" or "Later", but choosing "Quit Now" worked.
    Hope this helps.

  • TS3018 my iphone 5 will not allow messaging through ford "my touch" ..it says contact apple for support ? phone & music are fine, cant send voice text

    my iphone syncs fine for phone & music, but it wont allow me to use voice text messaging....says apple needs software update ? anyone else ?

    It doesn't say "apple needs software update".
      "Apple" is a company, and does not need an update. What exactly is the message? And why can you not update whatever it is?

  • Contact form not allowing certain characters

    Hi
    I added a contact form to a site, and the input fields aren't allowing numbers or certain letters.
    If I test the contact form swf by itself, it works fine.  But as soon as I test it in the site, the problem occurs.
    I haven't got any other actionscript around the contact form, so am puzzled.
    I would sure appreciate someone taking a look to see if anything obviou is wrong.
    The site is www.skinrevival.com.au  - the contact link is on the bottom left menu.
    Cheers guys
    Shaun

    U should enable the Numerals and puctuation to accept the special and number chanacters. find the attached image for your reference.
    Thanks
    Thil

  • IMAP service not allowing message to be sent when off local network

    Hi,
    I almost always use my laptop along with mail.app on my home network that has OS X server with the mail service running
    When I leave my network, however, and try to send a message using mail.app, it shows an error saying
    "The server responded: <[email protected]>: Relay access denied"
    I relay through smtp.comcast.net
    It prompts me to select another from a list (sending mail works fine in squirrel mail in browser though regardless of location).
    I can receive mail in mail.app regardless of locations too, I just can't seem to send messages while away from local network.

    The problem you are having is caused by Comcast rejecting any SMTP relay requests that do not originate from a comcast.net connection.
    Your OS Xserver is connected to the comcast.net network, so it can relay SMTP through smtp.comcast.net.
    Try contacting Comcast and see if you can authenticate (username/password) to their SMTP server while you are on the road.
    Hope this helps!
    -Gregg

  • The application Contacts does not allow me to add a New Contact

    After adding a New Contact I suddenly discovered that once closed and reopened the Contacts application did not retain it. I then repeated the procedure three times. Yes, I remembered to click on Done after completing the entry.
    Thank you for any assistance.
    Below is a printout of EtreCheck:
    EtreCheck version: 1.9.12 (48)
    Report generated August 8, 2014 at 2:56:16 PM EDT
    Hardware Information:
      iMac (27-inch, Mid 2010) (Verified)
      iMac - model: iMac11,3
      1 3.2 GHz Intel Core i3 CPU: 2 cores
      16 GB RAM
    Video Information:
      ATI Radeon HD 5670 - VRAM: 512 MB
      iMac 2560 x 1440
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 0 days 9:43:4
    Disk Information:
      WDC WD10EARX-00PASB0 disk1 : (1 TB)
      EFI (disk1s1) <not mounted>: 209.7 MB
      Hard Disk (disk1s2) /Volumes/Hard Disk: 999.86 GB (868.05 GB free)
      Samsung SSD 840 Series disk0 : (120.03 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      SSD (disk0s2) / [Startup]: 119.17 GB (57.38 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Internal Memory Card Reader
      DYMO DYMO LabelWriter 450
      Apple Inc. Built-in iSight
      Apple Computer, Inc. IR Receiver
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [not loaded] com.dymo.usbprinterclassdriver.kext (1.1 - SDK 10.5) Support
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.bombich.ccc.plist Support
      [running] com.dymo.pnpd.plist Support
      [running] com.micromat.TechToolProDaemon.plist Support
    Launch Agents:
      [running] com.micromat.TechToolProAgent.plist Support
    User Launch Agents:
      [loaded] com.adobe.ARM.[...].plist Support
      [failed] com.google.keystone.agent.plist Support
    User Login Items:
      iTunesHelper
      SpeechSynthesisServer
      Mail
      Safari
      xScan
      xScan
      AdobeResourceSynchronizer
    Internet Plug-ins:
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
      DYMO NPAPI Addin: Version: 1.0 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      DYMO Safari Addin: Version: (null) - SDK 10.5 Support
    Safari Extensions:
      AdBlock: Version: 2.7.5
      Awesome Screenshot: Version: 1.4.3
      iTube Studio: Version: 5.2.0.0
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Flash Player  Support
      TechTool Protection  Support
    Time Machine:
      Time Machine not configured!
    Top Processes by CPU:
          51% lsof
          49% xScan
          1% WindowServer
          1% fontd
          0% warmd
    Top Processes by Memory:
      229 MB com.apple.IconServicesAgent
      147 MB Mail
      131 MB softwareupdated
      131 MB com.apple.WebKit.WebContent
      131 MB Safari
    Virtual Memory Information:
      10.87 GB Free RAM
      2.79 GB Active RAM
      1.18 GB Inactive RAM
      1.15 GB Wired RAM
      558 MB Page-ins
      0 B Page-outs

    Thank you Barney-15E for your extremely prompt reply and CORRECT solution! I wasn't quite certain about the "syncing" factor, so, I did nothing there; however, when I went to "Application Support/AddressBook" I found three almost identical files:
    AddressBook-v22.abcddb
    AddressBook-v22.abcddb-shm
    AddressBook-v22.abcddb-wal
    I followed your instructions and deleted only the first which matched your suggestion, but I'm wondering what the other two are. By deleting the first item and then reopening Contacts, I was able to add a New Contact AND retain it!
    All entries had been deleted, so of course, I simply imported the saved archive. I'm puzzled why it is that Apple uses the term "AddressBook" in Application Support when the application is now called "Contacts."
    Again, thank you.

  • After update, Contacts does not allow me to edit or add new. What am i missing?

    After completeing iOS 5 update, I can not access Contacts. Can't add new, can't edit. How do i fix this?

    If you have a gmail, yahoo, or even iCloud, etc. account go into settings>mail, contacts and make sure you're not syncing through yahoo for example.. Turn that off, if that still doesn't work delete the yahoo account and simply set up the account again..will add the + &amp; edit functions again..

  • Excel 2007 Not allowing message popup when double clicking

    Hello,
    We have recently upgraded to Office 2007 and are using IP workbooks.  When a user gets the "messages available; double click to display" the message box is not popping up.  Does anyone know how to fix this issue?  Not sure if it is an excel issue or a BEx issue.
    Thanks,
    Cherie

    SAP Note 1299828 mentions that it has been fixed with BI Addon Support Package 9.
    SAP Note 1294382 - SAPBINews NW7.0 BI Add-On Frontend SP900 - GUI 7.10 says:
    Fixed in Bex Analyzer: "Message popup is not shown on double click in Excel 2007. Please read note 1299828."
    I have it installed now but it does NOT work either (for me)!
    At least in the global settings the option automatically popup messages works. Each action brings up the messages then.
    Cheers,
    Lars

  • Contacts will not allow new cards, unresponsive

    I have 10.8.2 on an IMac 27" year 2011, Mountain Lion. Contacts app will open, toolbar, however cannot create new cards or view address book. How do I resolve this? I tried repairing permissions which didn't help. Thanks!

    Disable Contacts in the iCloud System Pref, if you are using that. Then, try the steps I outline here: After Lion upgrade, my addressbook does not work++
    If that fixes it, re-enable iCloud.

  • I have installed the new i OS 7 on my IPAD, I am having trouble with sending messages.  I reset the imessage and networking as I did for the iphone but it still does not allow messages to be deleivered.  any suggestions?

    I have installed the new iOS 7 on my I Pad and am having trouble with messaging, I reset the imessages and networking and the messages are still not being deleivered.

    Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Firefox hangs (at anytime; nothing works/helps; keyboard useless) & constantly get no response/action; I get Firefox "not responding" message at top-left of window.

    Firefox hangs at anytime. Nothing works, (mouse/keyboard). Sometimes after 1 or 2 min. it works again, other times it freezes & I must re-boot (cut power & restore power) as keyboard or mouse does not respond. This happens at anytime, not when doing any specific task. Also have an unrelated question: I have have 2 Firefox icons on my desktop & 2 on my bottom toolbar, one reads as "Mozilla Firefox" & one as "Mozilla Firefox (2)". Is it possible I have 2 versions/programs installed & if so, how do I verify & correct this?

    You may somehow have installed a second copy of firefox. (I deliberately have multiple versions installed) Have you been trying the Beta or Aurora channels of Firefox ?
    You may have just copies the shortcut icons. I use XP but assume Vista is similar, and that if you right click the icons they will allow you to see the properties, that will include the path to the firefox program ''firefox.exe'' . Do both shortcuts point to the same file and location ?
    Another possibility is that one icon is for normal use, and another for safe mode, again something you will discover if you study the properties.
    For general information see
    * [[firefox hangs]] <-- clickable link (blue) --
    *[[firefox is already running but is not responding]]
    There are currently two reasons for hangs that are frequently reported
    * see http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
    * and another is where pages are slow to load [[Firefox never finishes loading certain websites#w_lower-the-max-number-of-http-connections]]_lower-the-max-number-of-http-connections

Maybe you are looking for