Contact with laptop, can't boot anymore

I'm crossing my fingers that someone might know how I can get my computer working again. I accidentally sat on the screen of my open laptop which was on my couch and that sent the keyboard swinging up which made hard contact with my elbow to the right of the mousepad. I checked the screen right after and I could move the cursor for a few seconds and then it froze, so I restarted my computer which leaves me at a black screen for maybe half a minute, the Toshiba screen pops up, followed by some code that says something with PCI Family Systems, then I get a boot menu that says:
HDD/SSD
CD/DVD HL-DT-ST-CT30F
FDD
LAN
<Enter BIOS Setup>
My laptop is a Satellite M645 by the way. Any help would be GREATLY appreciated. THANKS!!!

That's not your full model number. It should be on the label on the bottom.
What happens if you pick "HDD/SSD" from the boot menu?
- Peter

Similar Messages

Overwrote (full) iPod contacts with Laptop Contacts when syncing in iTunes

Overwrote (full) iPod contacts with Laptop Contacts when syncing in iTunes. Can I get old (full) contacts back?
Bakstory: Laptop crashed, got restored, but without contacts. Mistakenly thought I could upload them from my iPod. I hit sync. Big mistake. When I disconnected, I saw my iPod has the measley 4 contacts I DID have on my laptop after the crash, instead of the hundreds I had on the iPod just minutes before.
Note: There is nothing in the desktop Trashcan that says "contacts."
I also tried to post this question in the iTunes section, but for some reason I can't seem to post there.
Thanks for any help!
(Man, everyone agrees this is a design flaw--in how you share info from iPod to CPU and can easily overwrite things you don't want to. They should fix that.)

Yes, you can do that.
On the computer that you only want to sync contacts & calendars to just unselect content like music, photos, apps, etc.
You can only sync content like music with one computer at a time, content like contacts with as many as you like.
Before you sync your contacts & calendar with the laptop, make sure you have one entry in address book & ical, select merge at the prompt, do not select replace.
Make sure you disable auto sync when a ipod/iphone is connected under preferences in itunes.

Hp laptop can't boot

My laptop can't boot after connecting it to a flatscreen using an HDMI cabble, any help…

Hi
please chk for the output options
>>hold the windows button and press P
>>if its winows 8 ctrl+C you have a option for share select project
Connecting a TV
Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
I am an HP employee

How can I sync my Iphone contacts with laptop running Windows 7

I have a laptop running Windows 7 and would like to sync my Iphoneand ipad contacts with Windows Live, which is not possible. Microsoft have told me to download a WOA app for each device and subscribe to Office 365. Then use an exchange program within Outlook. Is there another simpler and cheaper method. The Office 365 sub is $99pa. Can I use icloud?

Hello there, Darrelk.
The following Knowledge Base article has information for syncing from your iOS devices:
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Specifically:
Contacts
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Contacts" in OS X v10.8, or "Sync Address Book Contacts" in OS X v10.7 and earlier.
You can sync your contacts with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Outlook 2010 (Windows XP, Windows Vista, Windows 7, and Windows 8)
Windows Address Book (Windows XP)
Windows Contacts (Windows Vista, Windows 7, and Windows 8)
Address Book (Mac OS X v10.7 and earlier)
Contacts (Mac OS X v10.8)
Microsoft Entourage 2004, Microsoft Entourage 2008, or Microsoft Outlook 2011 for Mac
Notes:
When syncing contacts, you can choose to sync all of your contacts or only selected groups. The option to sync selected items may not show up until after the first sync.
You can select a group of contacts to which all new contacts created on your iOS device will be added.
Additional options for syncing include syncing your contacts with Yahoo or Gmail/Google Mail. You will need to configure it with the user name and password for your Yahoo or Google account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Troubles with Lion, can't boot !

Hello all,
Before all, I'm french so please excuse my language.
Since yesterday, I can't boot my Mac Book Pro. In fact, a loading bar, same like safe boot mode, appears a few seconds. Then, it disappeared and my mac shut down. I boot with Recovery HD, and in Disk Utilitaries, I see that Macintosh HD can't be repair (troubles about the lenght of key…). I have a External Hard Disk, but no save with Time Machine. I ask myself, can I restore Macintosh HD with Macintosh HD ? I explain, in restore of the utilitary, if I select as source and as destination Macintosh HD, it will works ? And permits to boot normally ?
Thanks for help !
B3nito

I understand the part about "[nothing] lower than 10.6.6". What I'm trying to find out is confirmation of something I read in a MacNN article regarding Macbook Pro's with Lion pre-installed--that they cannot boot "other versions of MacOS X".
If this is the case and if there is no workaround, I guess I'm going to be looking at refurbs if I don't find any old-stock boxes next month, when I will be able to purchase a new computer.
(The reason for my concern is not about the point of the MacNN article, which was about the fact that those particular Macbook Pro's have no Lion recovery option should the hard disk go completely bad--requiring either a trip to Apple Service or the currently unvailable Lion USB flash media to restore Lion to the replacement drive; rather, it is that I still need Rosetta for some of the software I'm using.)

Power outage caused laptop not to boot anymore

I had my hp Pavillion dv9000 connected directly to the wall without the battery inside and was watching a movie. The power outlet suddenly died and consecquently my laptop turned off. Now when I try to turn it on, the fan runs but nothing shows up on the screen; not even the hp logo or BIOS. I noticed that the hard drive access LED never lit up so I assume it wasn't just the screen that broke but something is causing the whole computer not to boot up at all. Most likely something got fried but I'm not sure what. It's a shame because I really liked that laptop and would like to repair it if possible. Does anyone have any suggestion?

Hello NTHQ,
Sorry to hear you are having trouble with your HP notebook powering on.
I have looked for information on your system and I do have a suggestion for you that might be helpful.
You should check and see if you are getting a blink code from the caps lock and num lock keys.
Here is a link explaining the blink codes.
Can you provide your full model and product number? Here is a link showing how to find that information.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

[solved] power outage on SSD - can't boot anymore

Hi,
I just had a power outage, battery was unplugged. Boot process stops on the rescue prompt.
The last line of journalctl -xb says :
Failed at step EXEC spawning /bin/plymouth: no such file or directory, error 2
My system is installed on a SSD, Crucial M4 250GB.
Last edited by OlaffTheGreat (2013-09-21 15:41:41)

Well, I see a lot is beeing said about run levels and systemd. Like many of you, if I had the use of init, I have to learn more about systemd before to be at ease. For the moment I'm still quiet buffled.
For now, I can give you relevant red or bold lines I find in journalctl -b --full.
Sep 19 11:09:43 obsidian kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
Sep 19 11:09:43 obsidian kernel: scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 040H PQ: 0 ANSI: 5
Sep 19 11:09:43 obsidian kernel: sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
Sep 19 11:09:43 obsidian kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 19 11:09:43 obsidian kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 19 11:09:43 obsidian kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 19 11:09:43 obsidian kernel: sda: sda1 sda2
Sep 19 11:09:43 obsidian kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Sep 19 11:09:43 obsidian kernel: scsi 2:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] Write Protect is off
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] No Caching mode page present
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] No Caching mode page present
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Sep 19 11:09:43 obsidian kernel: sdb: sdb1
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] No Caching mode page present
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] Assuming drive cache: write through
Sep 19 11:09:43 obsidian kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Sep 19 11:09:43 obsidian kernel: EXT4-fs (dm-2): mounting with "discard" option, but the device does not support discard
Sep 19 11:09:43 obsidian systemd-vconsole-setup[200]: /usr/bin/loadkeys failed with error code 1.
Sep 19 11:09:44 obsidian kernel: intel_rng: FWH not detected
Sep 19 11:09:44 obsidian kernel: ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
Sep 19 11:09:44 obsidian kernel: composite sync not supported
Sep 19 11:09:46 obsidian systemd[1]: var.mount: Directory /var to mount over is not empty, mounting anyway.
Sep 19 11:09:50 obsidian systemd[1]: Unit fancontrol.service entered failed state.
Sep 19 11:24:33 obsidian systemd-tmpfiles[2944]: stat(/run/user/1000/gvfs) failed: Permission denied
For the "discard" option, I will open a thread about SSD if I don't find further informations.
Does the last line show it can't turn on the user ?

Treo Pro: After establishing Bluetooth connection with laptop, can't connect to P.A.N. Windows XP Pro

I am able to setup a Bluetooth partner ship between my Treo Pro and my laptop without much difficulty. However when I try to establish a PAN connection via My Network Connections, I receive the following Windows error message:
The connection with the Bluetooth network device failed. The device may already be connected to another computer, or it may need to be configured to accept connections from this computer. Consult your device documentation for further information.
Any assistance with this matter would be much appreciated.
Post relates to: Treo 750 (AT&T)

No, that is not what I am referring too. I am way ahead of you there. I can pair my phone to my computer without any difficulties. My computer sees my phone and my phone sees my computer. Here is the route I am referring too; control panel, bluetooth devices, single click on paired Treo Pro, properties button, new window second tab (services), blank screen and no ability to add services. Very similar on the phone itself. For instance, when paired with my Plantronics headset, which by the way is not on the list, but works perfectly, the services box lists "hands free". When connected to the the computer, one of the services should be PAN connection.
Post relates to: Treo Pro T850 (Sprint)

Can't boot anymore

Hi,
Since my Filevault file corrupted (I know filevault isn't a good idea)I can't start my Ibook anymore.
It always stuck on the gray apple screen.
So I tried the command key CMD-V to see the system load status.
I found that when my Ibook start,it stop to load at the line:
"Feb 28 18:13:24 localhost mDNSResponder[158]: mDNSResponder-58.8 (apr 24 2004 00:15:05)starting".
If someone know how to fix my problem, he/she will be a GOD for me, because I don't want to lose all my data.
Thanks
Kingb1975
ibook g4 Mac OS X (10.3.4)
ibook g4 Mac OS X (10.3.4)

Try things in Mac101 (no offense) and Apple doc.#106464 for your startup issue.
Also, try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption. His link will help walk you thru it.
Cheers!
DALE

After installation of Mac OS 10.10.3, my MacBook Pro can't boot anymore.

I have MacBook Pro late 2013 with Mavericks 10.10.2. This morning after installation update, my MBP rebooted itself and can't find the installed OS.
MBP late 2013, 2,6 GHz i5 processor with 512 gb flash, OS X 10.10.2. System disk had two partitions.

SOLUTION FOR ME:
I used OS X internet recovery system to install OS X. It seems to be installed correctly and none of my files, apps and settings are missing.
https://support.apple.com/en-us/HT201314

Can't boot correctly or resume from sleep Compaq laptop, blinking caps light

Hi everyone, I'd like to know if there's a way to fix this weird problem, my laptop can't boot correctly (it shows the CPU blinking caps error code), and after reseting 4 times or so it boots successfully and it works great after that (never saw a BSOD or hang or anything). I can't also resume the laptop from sleep, it shows the same blinking error code.
I had the same problem like 3 months ago, I replaced the CPU with a new one and it worked without a hassle until now. (The reseting trick didn't work back then, so I guess it's a different problem now). Also since then the laptop never overheated, my CPU is always underclocked at 25% using the Maximum Processor State setting in Windows (it probably isn't underclocked at 25%, more likely at 50% or so, but I can certainly feel the difference because it never got really hot, the CPU reports a temperature of 110F/48C under normal use, and it always feels cool to the touch).
I mean, although the laptop works once I get it to boot, not only it's annoying but also I don't know how long it is gonna work doing like 5 resets every single day.
I've tried the arrow keys trick, pressing the power button without the battery or AC connection, I have also reset the BIOS, it booted correctly the first time (it asked to reset the BIOS settings to default), but afterwards it showed the same behavior.
Please don't waste your time telling me to buy a new motherboard and/or CPU, that would be impractical because it's way more convenient to buy a new laptop in that case.
Thank you very much.

Okay so after like a month or so I found a way to boot it up without problems, it also fixes the sleep problem. So if anyone is having the same problems, try the following: Turn on your laptop pressing the power button for a couple of seconds (just until you see the boot screens) as soon as possible after you connect the AC cable.

Won't boot anymore but in safe mode

My laptop won't boot anymore. I get a gray screen with a prohibition sign. Here's what I found so far:
If I boot in the verbose mode it gets stuck on something like Looking for boot device.
I zapped the PRAM. Didn't help.
I can boot in safe mode.
I used Disk Utility to check the drive and permisions. Everything ok.
I can't boot from the original Snow Leopard DVD. I press C, the drive spins then stops.
I reinstalled Snow Leopard from the safe mode. Didn't help.
In safe mode Safari is crazy slow. Firefox runs full speed.
Any idea?

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Unless you can boot from your installer DVD there's nothing you can do to reinstall OS X, so I'm not sure how you did reinstall as you said.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.

Re: Satellite C850 won't boot anymore - broken HDD

Hello Folks,
I bought a *Toshiba Satellite C850 - 1F2* with *+Windows 8+*.
After installing, upgrading to *+Windows 8.1+* and setting up everything, the whole machine worked pretty fine.
BUT since yesterday the laptop won't boot anymore!
When I turn it on, the HDD makes click and click and the system tries to boot from DVD, from USB, from HDD, from IPV4, from IPV6 and then it says, that there is no bootable device.
Unfortunately I wanted to make the +Windows 8 Restoration-/Rescue-DVDs+ this weekend!
Huh!!!
Well, I still have an *+original Windows-7-DVD and license+*, which would be good as well (I used it the last years).
*YET*, I cannot install *+Windows 7+*.
It says something like that, that +this system is not available for Secure Boot+.
I read about "Secure Boot".
So I pressed F2, turned the laptop on and could with this reach the BIOS.
It is a *+InsydeH20 Rev. 3.7+*.
*BUT*, when I go to "Boot Mode" I can only see, that this option is greyed and I cannot change from +UEFI Boot+ to +CSM Boot+.
Even the change of the HDD made no difference.
I put in my old HDD with Windows 7 installed (wich works in the other laptop), but the system won't boot, for it is +not suitable for Secure Boot+.
*So, WHAT NOW?*
I mean, it cannot really be the Toshiba politics, that you need to throw away your laptop, if the HDD breaks, can it?
For I didn't create the Rescue-DVD, I have just my Windows 7 DVD and another HDD with installed Windows 7.
Do I need to buy another Windows 8 licence and another HDD, to install Windows 8 (suitable for Secure Boot) again?
Would it even work like that?
Or is there any chance to upgrade the BIOS, for that I can then change from UEFI Boot to CSM Boot?
Or is there any other chance, to use my other HDD with Windows 7, or at least a new clean HDD, on wich I then can install my Windows 7 OS?
I hope, that someone can give me any good advice, what to do now ... without throwing the Toshiba laptop away ;)
Thanks in advance!

If the HDD died, in needs to be replaced.
If notebook is still covered by warranty, the HDD will be replaced free of charge. If warranty isnt valid, you will need to pay for the new HDD.
I think this understandable.
_Now some facts about the Recovery disk._
If you did not create a recovery disk in the past, you could order the recovery medium on this page: http://backupmedia.toshiba.eu/landing.aspx
The recovery disk would install the Toshiba image and would set the notebook back to the same state like at the first day of purchase.
_Regarding the Win 7 installation:_
Usually to install the non UEFI capable system, the secure boot needs to be disabled and boot mode needs to be set to CSM mode.
If this isnt possible you should update the BIOS but to do that you need an running Windows system (Win 8).

P67A GD65, OC genie 2 button in Control Center, doesn't boot anymore

My conf. (sorry I don't speak english):
i7 2600k
MSI P67A-GD65
2x2GB Kingston Hyperblu PC-1600
SSD Vertex II 160GB
Gygabyte gtx 560TI SOC
- OC Genie 2 in motherboard pressed
- Yesterday in Windows 7 x64, I clicked the OC genie button in control center, I click on no reboot, I click again on the oc genie button (to leave it as it was), no reboot. All OK. Today PC can't boot anymore: fans on, 6 phases leds on, 6 phases GTX leds on, no USB, no video...
What I can do, or did I broke the motherboard with two mouse clicks?

do >>Clear CMOS Guide<< with power cord removed
also what psu you use?

Can't boot from Install Disk for Leopard

I purchased the new xeon core dual which only boots in Leopard. I need to put Leopard on an external drive, so I purchased Leopard and tried to install it on an external drive. My computer starts to read the disk but before it even gets to the blue screen, it stops, scrolls down in a dark gray screen and says I need to restart by holding the power button down. The screen kind of looks like a kernal panic with oriental writing under the english.
I have tried by restarting and holding down the "c" key with no luck. I tried again with holding down the "option" key and when the hard drive and disk show up as choices. I chose the disk and still no luck. I disconnected all my external drives and tried again with no luck. I called tech support and they said it may be my optical drive. They set up an appointment with the genius bar at my local apple store. The genius listened to my drive and said there was nothing wrong with the drive and that it probably was a bad disk so they gave me a new one. Went home and tried with the new disk and same problem. Can anyone help?!! Thanks.

I purchased the new xeon core dual which only boots in Leopard.
I need to put Leopard on an external drive, so I purchased Leopard and tried to install it on an external drive.
There's your problem. Macs which ship with Leopard can't boot Leopard retail, unless it is newer than the Mac in question. Check the version of Leopard on the Leopard retail DVD you purchased in the second quote. If it is older than what was installed on your Mac Pro based on the Mac Pro install and restore DVD, then it won't work on your Mac Pro. If you want Leopard of the Mac Pro to be backed up to be an emergency boot volume for the Mac Pro on the external drive, use a cloning software*:
http://www.macmaps.com/backup.html
Or follow these directions to backup your Mac Pro DVD*:
http://www.macmaps.com/bootcd.html
If you need an emergency Leopard volume for another Mac, install it directly from that other Mac. If that other Mac lacks a DVD drive, get a Firewire DVD drive to do it.
- * Links to my pages may give me compensation.

Contact with laptop, can't boot anymore

Similar Messages

Maybe you are looking for