Contact with more than two Addresses on Bold not all showing on device

I have a blackberry bold and noticed that when i input more than 2 addresses in Outlook on the desktop, the 3rd one (called "other") shows up on the desktop but does not show on the handheld?  is this a bug or is there a trick to having all three addresses visible?  It seems odd to have the Other Option if it is i not able to be viewed remotely?  Many thanks for anyone's help here.

You will need to "map" that other address field to your BlackBerry for syncing.
1. Connect your BlackBerry® device to your computer.
2. Open the BlackBerry Desktop Manager.
3. Double-click Synchronize.
4. On the Configuration tab, click Configure synch.
5. Select the Address Book check box.
6. Click Configure > Advanced Settings.
7. Click Field Mapping.
8. Map a field in the right column to a custom address book field in the left column.
9. Click OK.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • When I request an email be sent to a contact with more than 1 mail address Siri asks which address to use. How do I select one of them?

    When I request an email be sent to a contact with more than 1 mail address, Siri asks which address to use. How do I select one of them?

    I should clarify:
    When I request an email be sent to a contact with more than 1 mail address, Siri asks which address to use. How do I select one of them by voice in response to Siri's question?
    Bueller? Bueller? Anybody?

  • Finding Words with more than Two Vowels (Regex)

    Hello all, I've been working on this for quite some time now.  I need to use a regular expression to find words that contain more than two vowels.  I am getting stuck.
    Here is what I have so far.  I am using emacs to find them in a text file.
    I use C-M-s and the expression /<[^aeiou]*[aeiou][^aeiou]/>
    It finds words with one vowel, but I need to find if it has more than two, and I'm not sure how to go about doing that.
    Any help is appreciated!

    alphaniner wrote:
    This better not be a homework question...
    [aeiou].*[aeiou].*[aeiou]
    or, more succinctly (I think...)
    \([aeiou].*\)\{3\}
    I tested it with grep on a file with one word per line.  Seems to work in that context.  More than one word per line and it breaks.  I know nothing of emacs or your data, so I have no idea if it will suffice.
    I'd also suggest you go back over your expression and put into words exactly what you think it is doing.  I'm no regex expert, but it doesn't seem at all fit for what you're trying to do.
    Thanks that seemed to work!

  • Nokia -Grouping Contacts with more than 1 number

    I want to sync my phone with MS Outlook in such a way that it groups multiple numbers (eg home, mobile) for 1 contact under that contact's name.
    When I do it syncs to the SIM.
    For contacts with more than 1 entry it sets up contacts as: John Smith; John Smith1 etc
    When I copy from SIM to phone memory it keeps these names
    Does anyone know how to do this - I did manage it with the same handset (now replaced) but can't remember how.
    It feels like I should be able to sync to the phone memory rather than SIM, but the Mokia PC suite doesn't seem to allow me to do that.

    I'm From South Africa and the sim cards we have in this country just save one number per contact and I would also get the same result with any simcard that is available in this country if I tried what your trying to do.
    Assuming, There aren't many different types of sim cards then your sim card will also not be able to store multiple numbers to the same name. They just aren'r designed that way.
    The same will happen if you copy your contacts from phone to sim. It just can't be done 
    Show your appreciation. Hit that kudos button real hard

  • JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

    Hi everybody
    I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
    Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
    please Help.
    Thank You.

    Wonder if you have made any progress - if so,
    could you share ?

  • How do I share my contacts with more than one group? I really don't want to have re-type them into a different group. Help!

    How do I share my contacts with more than one group without having to re-type them into each group?

    Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
    iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
    You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

  • RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

    Hi,
    I am using JDEV 11.1.2.1.0
    I am getting the following error :-
    <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
    Piece of code is for region is:-
       <f:facet name="second">
                                                <af:panelStretchLayout id="pa1"
                                                                       binding="#{backingBeanScope.Assign.pa1}">
                                                    <f:facet name="center">
                                                        <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                                   binding="#{backingBeanScope.Assign.r1}"/>
                                                    </f:facet>
                                                </af:panelStretchLayout>
                                            </f:facet>
    How do I resolve it ?
    Thanks,

    Hi,
    I see at least 3 errors
    1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
    the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
    2. SAPFunction.jspx/.xml" has an invalid character ".".
    check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
    3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
    "pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
    Frank

  • Intercompany transactions with more than two company codes

    Hi fellow members,
    We have a requirement for intercompany transactions with more than 2 company codes. The sales order is booked in company code A and goods are despatched from plant that belongs to company code B. However, we need the inter-company invoice to be posted between company code B and an intermediary company code C. The second inter-company invoice is to be posted between company code C and company code A.
    There could be more than one intermediary involved based on the company code in which the sales order is booked and the company code of the delivering plant. Would appreciate inputs from the forum of how this could be achieved in ECC.
    Appreciate your help
    Regards
    Rohit Zalani

    Hi Rohit,
    Two scenario require as per your requirement.
    Inter company Sale between A TO B .
    Cross Company stock transfer between B  to C.
    Sunil

  • Create activity with more than partner and send email to all of them

    Hello All,
    I am working on CRM 5.0 activity management I want  to create activity with more than activity partner and send email to all of them
    Regards
    Khaled Fahim

    hi
    you can achieve this easily by creating a partner determination procedure in which you will be having more than one partner function having the function category as activity partner.
    once you created the PDP just attach this to the transaction and then call the procedure when you are actually creating an activity.
    for sending mail you can use FM
    SO_SEND_MAIL_DOCUMENT_AP1
    this is just one way
    another way is which stephen suggests
    you can use the personalised mail form functionality ,this is good in a way u neednt do any coding it will solve ur purpose in standard way.
    another way is when you create campaign and when an inbound activity is created for the every survey response
    this way you can send multiple mail and also for more than one or even n number of activity partners ,we can create the activity for the same
    best regards
    ashish

  • Creating hash table with more than two columns

    Hello,
    I tried to search around and can't quite find what I'm trying to do. I know I can make a hash table like:
    $Hash = @{"Texas" = "Hot";"Alaska" = "Cold"}
    But I would like to add a third column, so for the sake of an example have the third one say travel by air and the other travel by car. What's the syntax so I can add more columns than two? Also, how can I change the column header names?

    I think you want something more like this:
    New-Object PSObject -property @{
    State="Texas"
    Temp="Hot"
    Travel="Air"
    If I set $hash to equal that:
    $hash = New-Object PSObject -property @{State="Texas";Temp="Hot";Travel="Air"}
    I get this:
    Travel                                  Temp                                    State
    Air                                     Hot                                    
    Texas
    If I have a master variable
    $hashes = @()
    I can set $hash to the new-object of relevant values each pass of a loop:
    $hash = New-Object PSObject -property @{State="Alaska";Temp="Cold";Travel="Car"}
    And add that to $hashes each time:
    $hashes += $hash
    and add to the collection:
    Travel                                  Temp                                    State
    Air                                     Hot                                    
    Texas
    Car                                     Cold                                    Alaska
    As mjolinor suggested, you really need to understand what you want to do.  I suspect you are just unfamiliar with the terms, because what you're describing is an array of values, which is better suited to a PSObject rather than to a hash table.  
    The method for populating a PSObject I describe above is just one variation of one particular method for doing so, there are others that may be more or less suitable for what you want to do.
    I hope this post has helped!
    Thank you, this is what I was looking for. I've never had to use powershell for this type of task before and did know of this process, and only could find hash tables when I poked around. This will make life much easier! 

  • Delivery address in PO with more than one address for storage location

    Hi All,
             Can you please let me know how the storage location addresss gets picked up in a PO where the storage location has more than more address defined in customizing. How can we control the address in the PO ?
    Regards,
    Ashwin

    The purchase order will take the first storage location address.  User exit EXIT_SAPLMMDA_001 allows you to select one of the other addresses if you wish. For more details refer to OSS Note 498153 - FAQ: Addresses in the purchasing.

  • Fragments with more than one root component may not display correctly ...

    Using JDev 11.1.1.3; have a page fragment that contains a layout component for the content, but also an af:popup definition as child to the root tag of the fragment. I get the above design-time warning; wondering whether this is customarily ignored when the secondary components are popups, or whether there is a better way of defining the popup which needs to package with a fragment ?
    Thanks,

    I get it in the structure pane along with the other Warnings (eg: Reference selectedRow not found).
    <jsp:root ...>
    <c:set ...>
    <af:panelStretchLayout ...>
    <af:popup ...>
    </jsp:root>
    ... would put 1 warning in the Structure pane alerting developer to the fact that the popup isn't expected.
    Thanks for the assistance.

  • CS3, exporting to tape has problems with more than two video tracks

    Well, not quite, but that's the best I could do in the subject line.
    I record multiple performances and edit scenes from among them.  At times, this results in three or four video tracks on the timeline at once.  Each track is 100% opaque, so only the top Enabled track shows.  By Enabling or Disabling the various tracks, I can get the sequence I want.
    And the sequence plays back fine in the Monitor window.  But when I try to Export it to tape, as soon as I get to such a place, the image hiccups around the same small number of frames (think of the video equivalent of an audio sample).
    It's not the number of video tracks.  I can add Image Mattes on a third video track operating on the two below.  I can add any number of titles on different tracks.  They need to render, but then they export to tape perfectly.
    What's different about three or more .avi tracks, even when they are Disabled?

    Thanks, Jim, for your reply to this and other threads.  (Warning:  I had two other questions — been saving them up for awhile — that I'll post shortly.  It was too late already last night).
    > AVIs need to be "read" from the hard drive and can create a bottleneck depending on certain conditions.
    Agreed, but unless there is partial opacity in the top Enabled track, only one track at a time is exported.  And in the cases I cited, the unused clips were Disabled.  No need for Premiere to read them at all.  I assume the state of each clip is part of the Project.
    Ah well, I was only curious if I was missing something obvious, or perhaps it was a known bug that would be addressed.  Apparently the additional resources needed for tape export push Premiere over some edge.  Remember, I can watch (even Preview) the sequence in the Monitor window without seeing this artifact.
    > Render before exporting to tape is SOP.  Go with that.
    Naturally.  And I do.  And if I didn't, Premiere would do it for me automatically before opening the Export to Tape window.
    Thanks again.  On to the next thread.

  • Left Outer Join with more than two tables in both CR 8.5 and XIR2

    I am trying to create a report and I have tried two versions of Crystal but I ultimately need the report in CR8.5 for compatibility with the client's system.  I think I am starting to figure out what might be wrong and it might be my understanding of SQL, but I can't see why someone hasn't needed this in the past. Ultimately I want to see all projects and any journal entry that might be posted for that project.
    Database is MySQL 5.0.38 and using MySQL ODBC driver 3.51.19.
    Project header table information will be populated. Each line item on a journal entry can be tagged with the project ID. But for me to pull the journal entry date I need also to link to a third table for the journal entry header info.
    I want to see all projects, whether a journal entry has been posted or not.
    So the links are like this
    ProjectHeader --->Left Outer Join ---> JELines ---> Inner Join ---> JEHeader
    I think in this scenerio Crystal is treating the LOJ as an IJ.
    I created two brand new reports today, one in CR8.5 and one in CR XIR2. Once I edited the automatic CR8.5 SQL statement (which I have been doing for years, usually without problem), they both ran properly. I linked customers to their invoices. Customers without invoices showed properly. But then I linked the invoices to the payments of the invoices and immediately lost customers without orders in both reports.
    So apparently only two tables are allowed in Outer Joins. Does this make sense?  I checked out the w3schools tutorial on SQL and it doesn't mention this limitation and I can't find anywhere else that it specifically indicates this but all samples of code I have seen only show two tables.  I just thought for presentation as a sample that was easiest to understand and we could expand as necessary.
    If this is correct, how does one go about accounting for this kind of thing?  One solution that goes through my mind is creating a view at the database level for the link between journal entry lines and journal entry headers.  Would this be a good solution under normal circumstances?
    A second option that I had to implement because of timelines, is to use a subreport linked to the main report through the project ID to pull the information for the journal entries and just pass the totals I need to the main report through a shared variable.
    These aren't normal circumstances because I don't have access to the database so I can't create the view.  I have come across this concept several times and I have been able to use subreports to solve it but I am trying to find a better solution for the future as sometimes subreports can be slow.  So are there any alternatives I have not considered here?
    TIA rasinc

    So after some more work and another post.  I was able to get this to work.
    Items disappear when linking to another table
    My issues were two fold.  I was selecting on the tables on the right-side of the original Inner Join.  However, I was checking for Nulls.  This apparently is correct but you must check for the Nulls first eg. (IsNull (JEHeader.Field1) OR JEHeader.Field1 <= 100).  I had my original statement reversed checking for <= 100 before checking for Nulls.
    I also did not set all links to be Left Outer Join.  I had the Inner Join.  I actually have about 6 tables in this report so all the links need to be set Outer Join.  So this now seems to be corrected.
    Thanks

  • Hashtable with more than two columns??

    Hi. i'm trying to make a cache in java.
    the cache neeeds to have three values per index location, Flag,Tag and Data. Is there anything in java that can have three values??
    I know hashtables can have two (one key, and one value), but i need one more, and also i need something that i can access with an index like you do with arrays.
    thanks

    rudeboymcc wrote:
    Hi. i'm trying to make a cache in java.
    the cache neeeds to have three values per index location, Flag,Tag and Data. Is there anything in java that can have three values??
    I know hashtables can have two (one key, and one value), but i need one more, and also i need something that i can access with an index like you do with arrays. An array or List storing objects of your own design that have three instance fields; flag, tag, data.

Maybe you are looking for