Contacts and Calendar not loading into Droid

I have my email set up and I am receiving email messages.  I have Calendar, Contacts, and Email selected in the account settings for this account, yet contacts and calendar entries have not downloaded.
Just noticed I had to hit the sync button while in the inbox view to get an email that was 15 minutes old.

Which email app are you using?  I use YAHOO and there is a setting in the APP that I have to set for the frequency of receiving emails ... unfortunately the lowest number is 15 mins.   You can check out other email apps that have more frequency - I think K9 is one of those that people seem to like.

Similar Messages

  • CR files will no longer show in bridge and will not load into PS

    Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
    I get now the following error messages
    These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
    I tried image processor in bridge to make them PS files and got the following error message.
    I tried to load one of the CR files from the finder dirretly and got the following error message.
    Any help would be appreciated. If the post goes inanswered I will call tech support  again. aloha UP

    HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

  • Contacts and Calendar not sync'ing with Outlook 2010

    All was fine today until (maybe coincidental - maybe not) I had a Microsoft Exchange email account added to my Outlook 2010.  I have an iPhone 4, and I usually sync daily, especially when calendar or contact changes take place.  I am currently not using the icloud, so all contacts and calendar events would be way too outdated.
    I have checked my Outlook settings under "info" and cannot get my contacts and address to load.  I even see the "Contacts syncing"..."calendar sync'ing" when the overall iTunes sync takes place with my iPhone.
    Help!!

    Yes, it is. Do you have Desktop Manager v6?
    Download Desktop Manager from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Contacts and Calendar not Pushing

    After doing a restore and update to 2.1 my contacts and calendar data are no longer in my phone. I have set the push switches for the email address to one (email works fine). I have changed the push settings on the iPhone to manual, then 15. I have gone back to the email account and cancelled sync and restarted it. The data is just not downloading from the cloud.
    Any other ideas on how to encourage this to happen?
    Thanks

    Looking into this further, I found that my email address in my iPhone had a double @me.com. The address was [email protected]@me.com. The second @me.com did not show until I deleted the address and tried to type it in again. Then immediately the @me.com would appear after what I was typing but before the @me.com.
    I deleted the account and created a new one, and everything works for now.

  • Contacts and Calendar not synching. (Centro, Windows XP, Palm Desktop 6.2.2) Please help!

    I originally posted on the Hotsync forum, and it was suggested that I post my question here.  Important information:  My office uses Microsoft Outlook Exchange, and I have my Centro set up to get my emails.  It also wants to sync my contacts and calendar; however, that is completely unneeded for my purposes.  I need to synch my Contacts and Calendar with my Palm Desktop.  If there is something I have to check or uncheck to do so, please tell me how.
    This is my original post:
    "When I hotsynch, my memopad, my documents to go, everything seems to synch except my contacts and calendar.
    After a few hours on the phone with tech support at sprint, we went for the nuclear option, hard reset, and the temporarily solved the problem, but now it has returned.
    Information that might be important:
    I'm getting a failed to backup 1 file error>PmTraceDatabase>Protocol Error: Handheld file could not be opened (4004)>SYNCERR_FILE_NOT_OPEN.  This may or may not be relevent.
    Anyway, I appreciate any help with this.  I depend on this PDA phone to keep me organized and there's a slight and embarrasing touch of panic to how I feel now that it is not working correctly."
    Post relates to: VisorPhone

    Okay, I'm continuing to do research on this, and here's my suspicion, maybe true or maybe false.  When I set up versamail to get mail from my office's exchange server, it also configured my contact list and calendar to sync as well, and synching with the the exchange server and synching with my desktop software are mutually exclusive.
    If this IS true, then hopefully there is a way to set it up so I synch my email only with the exchange server, and leave my contact list and calendar configured to synch with my desktop software.
    Any feedback or assistance would be greatly appreciated.
    Post relates to: VisorPhone

  • Contacts and Calendar not syncing

    I know everyone is having issues with calendar and outlook but I am having an issue with contacts and calendar. Anyone else having an issue with both.

    I sync'd my iphone and lost all my contacts, in the phone and in my address book on my mac. You are not the only one.
    Hopefully someone can help to get my information back.

  • Contacts and calendars not displaying

    I've copied over my contacts and calendar items [from Outlook 2003] to my iPod and they are not displaying at all [blank] when I browse to them in my device - are there any additional steps I need?
    Thx for the help!

    Hello fellow ipodders,
    I have an ipod photo 30Gb for about 3 months now.
    Running first with Itunes 5.01 and now Itunes 6.0.
    When I tried to sync between Ipod and Outlook 2003 SP1 at
    the end there is nothing displayed in the IPOD. No contacts or calendar items. The sync seems to go fine, even granting for access to Outlook 2003 is asked and I permit that for 10 mins. But at the end nothing in my ipod.
    Is this problem somehow resolved now. It has been posted for that long time now.
    BTW: I feel that Apple is only a sales company. Selling pretty expensive portable mediaplayers. But the word support isn't in their dictionary....
    Brgds,
    Bas.

  • Help! Help! Help! Why is DPV and LACS not loading into memory ?

    Postalsoft Desktop Mailer - load into memory is checked and it does not load into memory,
    I tried it unchecked and it is the same speed.
    How do I fix this problem?????

    Tim,
    Please make sure to post any "classic Firstlogic software" questions under the Business Objects Enterprise Information Management (EIM) forum and you will get a much faster response.  Also you can log a case for support by going to the Help and Support tab on the SAP website, then click on Report A Product Error to log a case for support.  Just make sure to choose BOJ-EIM-COM for the component when logging a case for DeskTop Mailer or Business Edition. 
    Steve is correct.... we are aware of the slow speed issue with address correction when using DPV and LACS in DeskTop Mailer and Business Edition 7.90.  Rev 4 should be out by the end of this week.  This will correct the speed issue.  Please make sure to have the auto update option turned on in the software so you get this update.
    Thanks,
    Kendra

  • Ios8 - contact and calendar notes won't sync with Outlook

    After the ios8 upgrade, I have found that any note in either a contact or a calendar entry made on my iphone 5 won't sync with my office Outlook account, nor will any changes made to notes in a Contact in Outlook, update on my phone.  All worked fine pre-ios 8.  Anyone have a solution - have tried deleting accounts, re-booting, etc?  Thanks

    KB23978 should help you with the "calendar not installed" problem
    As for removing the facebook calendar, just go into options > advanced > service books > find "Facebook [CICAL]" and delete it

  • Contacts and Calendar not syncing from phone to outlook

    I am having a problem with my iphone 4 that I never with my iphone 3G and not sure how long its been going on.
    When I had my iphone 3 whenevewr I would create or change a contact or a calendar event it would sync with my outlook info. Now if I make a change or add a contact or calendar event from my phone it doesn't change it in my outlook. But if I do it from outlook it shows up on my phone. For example I added a birthday for July 4th and its not showing up in my outlook calendar. Its created this new category on my phone for birthdays.
    Same thing with my contacts. If I add a contact on my phone it doesn't sync with outlook it puts it under my iphone contacts on my phone. HELP!!

    *Sync Your iPhone With Your Outlook Calendar Using iTunes*
    1.Open iTunes and check to make sure that you have the most recent version. Do this by clicking on "Help" and then clicking on "Check for Updates."
    2.Use the cable that came with your iPhone to connect it directly to your computer. This will automatically launch iTunes. Select "iPhone" from the iTunes source list. Click on the "Info" tab in iTunes.
    3.Click on the "Sync Outlook calendars" option. Click on "Apply" in the lower-right corner of your screen. Your computer will now sync with your iPhone based on your settings.
    Read more: [iPhone Transfer Backup Reviews|http://www.softwarebbs.com/wiki/IPhoneTransfer_SoftwareReviews"]

  • How Do I Get My Exchange Contacts and Calendar to load onto my Q10?

    I have had my Q10 nearly 24 hours now and it has taken a large chunk on this time trying to set it up so that it can replace my old BlackBerry.
    The livelink transfer didnt work and the SIM card is a different size. So I am having to build the phone from scratch.
    I have got my email working, 2 exchange accounts.
    However, I cannot get my contacts or calendar to transfer to the Q10. I use activesync for my exchange emails, which works fine for the email but does not transfer the contacts or calendar.
    Anyone know why this is?
    Solved!
    Go to Solution.

    well, if you want activesync on your Z10, you simply have to configure an ActiveSync account on your Z10, with the proper parameters (usually less than 5 minutes to set everything up).
    the proper parameters must be asked by you to your email provider (in your case, it seems that it is your ISP).
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Notes, contacts, and calendar not updating properly on iPad.

    I have a first and third generation iPad and a 5S iPhone And using iCloud to maintain calendars, notes, and contacts.
    Updates to calendar from iPhone displays on the first gen iPad, but not the newer gen iPad. Notes that I try to update using the newer gen iPad creates a new file  with the same name. Contacts work fine between the first gen iPad and the iPhone, not the newer gen iPad.
    iPhone one and third gen iPad have up to date operating system software installed.
    Any ideas?
    Thanks

    I meant to say there is not longer an option. I started saying that their contacts are not showing on the phone in groups.

  • Contacts and Calendar not sync across all devices

    Installed mavericks a few weeks ago.  Just looked at a contact on my iPad and iPhone and noted that changes made on my MacBook Pro are not showing up on either of these 2 devices.  What is going on?  I used to sync manually using iTunes.  Tried this just now and does not update info in either calendar or contacts.  I used to see :syncing Calendar, syncing contacts in the window describing progress - this does not appear.
    Very very confused. Syncing across all devices very important.  spend a lot of time in rural areas with no access to wi-fi.  Am I trapped in iCloud only? if so How does that work??   Help!

    Still confused - now I have multiple copies of the same event on my MacBook Pro, and iPad, and not at all on my i iPhone, 
    Just created a dummy contact on my iPad, and it appeared on MacBook Pro but not on iPhone. turned off iPhone and turned back on and new contact appeared.
    My calendar on iPhone has no data from the time I started using Mavericks until a dummy event I added this afternoon.  Do I need to turn my iPhone off and then back on to get it to sync? even with turning off and on the missing calendar items have not appeared.
    I am a bit reluctant (afraid) to go to the web and look at my iCloud.com account for fear of sending yet another copy of the same calendar appointments  and duplicate contacts / contacts info to myself on my devices.  I have multiple copies of the same contact on my MacBook Pro. some of the contacts have 3 or 4 duplicates of the same information - example "home phone" or "e-mail address."  Sometimes I have 3 or 4 copies of the same contact card. 
    Hope you are having a better day, I am completely confused and more than a bit frustrated.  Has anyone written an app to replace sync services in Mavericks?  I would gladly pay for it!

  • LT graphics are greyed out and will not load into FCP4.5

    Hello All,
    We have LT1.2 and FCP4.5 and everytime we create a text graphic in LT we have to render a QT movie or FCP does not see the file when using import file in FCP.
    The .ipr files are greyed out and therefore they will not import into FCP.
    Thanks for any ideas. I did here one idea about re-installing FCP and LT.
    Alex

    No. I doubt it has anything to do with sequence settings. That has happened to me on occasion but not for quite a long time. I was able to drag and drop the file into FCP when that happened.
    I don't remember it happening since the last update or two.
    1shot

  • The Dimension for a video podcast has changed and will not load into Ipod

    I usually subscribe to a specific vid podcast but lately i have noticed that my ipod will not sync the new vid podcasts. it's very frustrating! i have had a closer look and realised that the vids that don't sync into my iPod have a larger dimension 852x480 compared to the old 480x270. This is an MPEG-4 file. What is the problem? What should i do? Can i adjust the dimension? if yes how? I'm not sure if this is the problem but if there are any suggestions i'd appreciate them.

    Right, but if I can't get beyond the startup apple logo, I can't restore with this process:
    You can restore an Apple TV (1st generation)'s software from the main menu by selecting Settings > General >Reset Settings > Factory Restore.

Maybe you are looking for

  • When trying to use MobileMe I am getting an error message: AppleSyncPref.exe - Entry Point not found  Can you help?

    When trying to use MobileMe I am getting an error messgae: AppleSyncPref.exe - Entry Point not found  Can anyone assist?

  • Check and assign a logical system to client

    Hi, How to check and assign a logical system to clients (for example client number 100)? Thanks & regards Duypm

  • Broadcasting our church service

    We are purchasing our first Mac for our church, and we broadcast our services through Ustream.  Can anyone tell me what adapter I need to go from the audio/video outs on the camcorder to the Mac? I think I may have posted in the wrong section.  Pleas

  • PO - adding field in VA03 header - order data

    Hi all, i am facing some problem to find out the user - exits,  in VA03 - header - order data    i added a text field in that Order data tab , and also i appended a field ZZSCON in VBKD where should i add the code to insert the text field in the DBta

  • Doubt in JSP

    hi , i was new to JSP, when iam learning jsp, i worte a jsp file for performing session tracking using jsp:usebean tag , for that i create a bean and i generate a class and i put that class in classes folder. here i got a problem, when i call this in