Contacts application error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

Similar Messages

  • Every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

    every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

    Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?

  • Photoshop CS5 filter gallery 'the operation could not be completed'

    with photoshop cs5 i get for a specific regular user when selecting filter gallery the error message 'the operation could not be completed'. all other users on the same mac show no problems. ???

    Thanks for your answer, but none of the solutions worked. Still the same error message.
    Am 22.06.2010 um 17:04 schrieb Jeffrey Tranberry:
    You could try running the permissions utility on this page (solution 1) to see if Chris's guess is correct:
    http://kb2.adobe.com/cps/845/cpsid_84517.html
    You could also post/submit your crash report from running in 32bit with your email address. That may yield some additional clues.
    >

  • Why does iMovie keep saying the operation could not be completed?

    My macbook pro has done this before where i go to iMovie and try to create a new movie but i can't because it says the operation can not be completed no other information about the problem. I need to fix this as soon as possible please help!

    exact same issue here. appeared in previous version of iMovie under 10.9.5, and appears again now in iMovie 10.0.6 after updating to 10.10 (not clean install)

  • Contacts error: The Operation could not be completed. No other information is available about the problem.

    I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

    Thanks!  I looked at the Busycal post:
              To fix this, open System Preferences > Security & Privacy, select Contacts in the left sidebar, then check BusyCal.app.
    On my system, only Skype, Parallels, and Contacts Cleaner are enabled to access contacts.
    FYI, LinkedIn doesn't list any apps as having asked for, or been given access.
              If that doesn't work, here is a bigger hammer:
    OK
              1) Launch Terminal in /Applications/Utilities.
              2) Paste the following text and hit return:
                   tccutil reset AddressBook     
    First, I want to see what that does so I ran man tccutil
         NAME
              tccutil -- manage the privacy database
         SYNOPSIS
              tccutil command service
         DESCRIPTION
              The tccutil command manages the privacy database, which stores decisions the
              user has made about whether apps may access personal data.
              One command is current supported:
              reset    Reset all decisions for the specified service, causing apps to prompt
                       again the next time they access the service.
         EXAMPLES
              To reset all decisions about whether apps may access the address book:
                    tccutil reset AddressBook
              3) Quit Terminal.
              4) Launch BusyCal, and click OK when asked whether to allow access to your contacts.
    Now I see under System Preferences->Security&Privacy->Privacy->Contacts that all apps were removed from the list.
    I haven't had BusyCal in years so I just launched Calendar and Contacts.
    Unfortunately, as soon as I launch Contacts, I get the pop-up again about the LinkedIn

  • Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

    Error - The operation could not be completed.  Not enough storage is available to complete this operation.
    After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
    I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
    I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle).  However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available.  I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
    Here are some of the things I have tried:
    reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
    -What else can I try?
    -Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
    Please help, I am willing to try anything to get this to work.  It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine...... 
    Thanks in advance for any advice or insturctions you may offer!

    Dear Customers,
    I am Baichao Li, Adobe Bridge Quality Engineer.
    Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
    1. Download "User Mode Process Dumper Version 8.1" from
    http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
    2. Install "User Dumper" following Microsoft's article
    http://support.microsoft.com/kb/241215
    3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
    4. Click button "New", input "Bridge.exe" for "Application Name".
    5. Select "Bridge.exe" from list box, then click button "Rules", 
                    Select "Use Custom Rules",
                    Browse to a custom dump file folder, 
                    Check "All Exceptions",
                    Check "Ignore Exceptions that occur inside Kernel32.dll",
                    Select "Mini Dump Type" to "Small"
                    Select "Save Mode" to "Cyclic Saving 5 times"
                    Others keep uncheck or unselect.
    6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
    7. Launch Adobe Bridge CS5, do your work.
    8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
    Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
    Best Regards,
    Baichao Li

  • I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

    I am using a portable USB storage drive connected to my laptop.  I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it?  Thank you.

    All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
    Open the Terminal application in the Utilities folder. At the prompt enter:
    sudo rm -rf
    Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

  • Streaming error the operation could not be completed

    Dear All,
    Please Help me i Above Subject Iam using Airtel Digital Tv Application name is pocket tv firts time is install Application is working good after some days showing error streaming error the operation could not be completed please try again later please let me know what is issued and how can fix this problem.

    I've continued tests on different films, and tried my entire collection. I've found about two dozen that will play fine on the PC, but will not cooperate when streamed to either Apple TV or my iPad. I tried several more tests with the audio, and that turned out not to be a factor -- I could not replicate that on another test.
    I wonder if something in the header of these files is corrupted or a flag is set incorrectly or something along those lines, as the data appears to be fine -- it's just not "handshaking" with my streaming hardware and/or the Apple Home Sharing code that powers it.
    Is there any way for me to "scrub" these files and amend their headers, or get into the file and tinker with that info by hand?

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • IMovie error message "The operation could not be completed"

    I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
    Any suggestions?
    Thanks

    My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder.  Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
    I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

  • The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

    https://discussions.apple.com/thread/6219522

  • The operation could not be completed because an error occurred when creating frame 6105 (error -1).

    I am trying to share a project and after the 3% of sharing the project it appears this message.
    The operation could not be completed because an error occurred when creating frame 6105 (error -1).
    What can I do?? I need some help please!!

    You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.

  • The operation could not be completed because an error occurred when creating frame 19788 (error -1).

    When attempting to build a quicktime movie from my video project on final cut pro I got this message    "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

    Kathy ...
    Better to post your topic in the Final Cut Pro community here.

  • The operation could not be completed because an error occurred when creating frame 570 (error -1)

    Hi everybody,just started with FCPX and the following occured:
    The operation could not be completed because an error occurred when creating frame 570 (error -1)
    Result is that i can not share to my hard disk.
    If anybody could help me out here....?

    CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.

  • The operation could not be completed because an error occurred when creating frame 2829 (error -1)

    I'm getting this error code in Final Cut Pro.  The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it?  This code comes up when exporting. 

    Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1.  I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

Maybe you are looking for