Contacts application, where is it?

i have the older version (2.0?) of the iPhone, and I have seen people with the new version and the old version, who have the new update, and they have that 'contacts' application as its own selection on their main screen, without having to access it by going to the phone and then to contacts. how do i get that to show up? or what do i have to download(i just got the new update) to get my contacts in its own special little space? =]
thanks

This feature was included with firmware update 2.0 so you should have it. This application cannot be deleted from the iPhone's Home screen. If you have a number of Home screens, have you checked each Home screen for the Contacts application?
There is no way to download this separately. If you don't have it available, I suggest doing a Restore with iTunes. Be sure to sync your iPhone with iTunes immediately before restoring to update your iPhone's backup if needed.

Similar Messages

  • Where is the data stored for the Contacts application in OS X 10.10?

    My client uses Backblaze online backup, and recently needed to retrieve his contacts. Is the data stored in the app itself, or somewhere else? Backblaze doesn't back up applications by default. Is there a way to instruct Backblaze to back up the Contacts application?

    Thanks, lllaass.

  • When i try to instal itunes on pc i get this message.      This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack.  HELP

    when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP

    Hello annesmith1954,
    Thank you for using Apple Support Communities. 
    You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC. 
    "Could not open key" message when installing iTunes or Apple components for Windows
    Regards,
    Jeff D. 

  • Receive message when downloading ITunes or Safari for Windows 7 64 Bit.  "Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package."

    Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened.  Verify package exists or contact application vendor to verify this is a valid Windows Installer package". 

    I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.

  • HT4098 I have paid for an iPad magazine subscription, but I can not see all the pages of the magazine.  All I am getting is the free preview.  The magazine company said to contact Itunes, where I don't see a solution.

    I have paid for an iPad magazine subscription, but I can not see all the pages of the first issue I just got.  All I'm getting is the free preview.  I contacted the magazine publisher, IPC, who said to contact Itunes, where I do not see an answer.

    You can contact iTunes Store Support here.
    https://getsupport.apple.com/Issues.action
    Click on Purchases, billing and redemption to get started. Are you sure that you actually downloaded the magazine? I have a subscription to one magazine and I choose to download the magazines on my own rather than automatically.

  • Is there an application where I can back up all my info that I have on my computer so I don't have to buy a external hard drive?

    Is there an application where I can back up all my info that I have on my computer so I don't have to buy a external hard drive?

    Yes, but off-site storage (i.e. Mozy) is more expensive in the long-run than an external drive, however, off-site storage is safer (not sure if I trust the security though), and even with a fast connection, the inital backup can take days

  • Bugs in the Contacts Application

    When I create a Group in the Contacts application, I do not seem able send that group an email.
    I have tried to use the contextual menu to do that, and by dragging the list to the email window.
    The group either does not show up or appears as an empty list.
    Andy

    First of all, when you say "the Contacts application," are you referring to Address Book? Address Book is the Mac (Lion) contacts database. If you are using something else, that probably explains it. Switch to Address Book.
    Assuming you are using Address Book, then yes, you should be able to send to groups. You'll want to drag a group from Address Book into the To: or Cc: or Bcc: fields in a new mail message. (Also, I'm assuming you are using the OS/X Mail application -- if you are using something else, this may not work). Make sure you drop the group into the To:, Cc:, or Bcc: fields at the top of the mail message.
    You can also just type the name of your group. If you have a group named "Family" as you start to type it (in the To:, Cc:, or Bcc: fields) it should autocomplete and give you an option to pick the group.
    Also, be aware that in Mail's preferences (on the Composing tab) there is an option to "when sending to a group, show all member addresses." You'll want to check (or not) that box according to your preference.

  • HT1338 How do I create seperate contact groups (family, business, friends) in my Contacts application on my Macbook Pro?

    How do I create seperate contact groups (family, business, friends) in my Contacts application on my Macbook Pro?

    You should have an option to create groups in the File menu. To add contacts to this group, simply drag and drop them to it (switch to Groups display, to view all your groups).
    Otherwise, you may create "smart groups", based on some criteria you define (File menu too).
    Hope this helps.

  • How to solve the Installation runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support..."

    After my pc system updated. I cannot open itune properly.Then I try to remove and re-install it again.
    However, the pc said "Runtime error : R6034, the application has made an attempt to load the C runtime library incorrectly. Please contact application's support...""
    How can I solve this ?
    Please help !!!!!!!!!!!

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • Flex Sample application - where to submit ?

    Flex Sample application - where to submit ?
    Hello, we have developed a Flex based CMS which I bielieve
    deserves to be featured as sample application on the Adobe site.
    The problem is - we can't find any informationwhere to submit the
    URL ? Can anyone help please.
    Martin

    here you go - >
    www.martinkonrad.com.au/cms_dev

  • Contacts application broken, how to reinstall it

    I can create contacts in the Contact application, but it doesn't save it. when I restart the applicatio everything disappeared.
    I tried to import contacts but it doen't create anything neither.
    Fresh install of Mac Os X 10.9

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • How do I remove duplicate Google accounts in the Contacts application?

    I reinstalled 10.9.
    I entered my iCloud credentials, and prevoius settings, including the Google account information appeared.
    I tried to log in to mail.google.com and Safari asked to add this account, to which I confirmed.
    Now I have two Google accounts in the Contacts application, but only one in the iCloud prefs. panel.
    It is somewhat annoying, is there a mehtod to fix this?

    The manual doesn't address it because there is no way to do it on the iPad. You can create groups in iCloud.com in a web browser, but that does no good either because the built in mail app will not let you use groups.
    Look at these two apps for that functionality
    MailShot- Group Email Done Right! for iPhone, iPod touch, and iPad ...
    Group Email! Mail Client with Attachments for iPhone, iPod touch ...

  • Contacts created from recent calls not showing up in Contact application

    recently added contact from recent calls section.  Tried to find contact in the Contact applicaton and it wasn't there.  I was able to find it by searching the phone and the name came up when I received a call from the contact again.  How do I get it to appear in the Contact application for easier access?  Do I have to create the contact in the CONTACT APPLICATION for it to appear?
    Thanks for your help.

    After calling Verizon, here is a fix that worked for me.
    1.) Look at your contacts information on the iPhone. If your phone numbers are not formatted with the parentheses and dashes, and are just a string of numbers like this: 1234567890, it likely means something went afoul in the initial sync. This is a good indicator that the following will work.
    2. BACKUP YOUR IPHONE ON ITUNES before you go any farther. You may eject the iPhone at this point or leave it connected. I left mine connected to my desktop.
    3. Then go to Settings > General > Reset > Erase All Content and Settings. You will receive a prompt or two to make certain this is what you want. Proceed.
    4. Let the Reset process conclude. It may take a couple minutes or so.
    5. You will have to go through the re-activation process afterwards. Slug through it.
    6. When all that is finished, reconnect your iPhone (if you disconnected it after backup).
    7. When asked, select "Restore iPhone from a Backup". Let the process finish.
    8. Now, check your contacts. If instead of seeing a line of numbers for your phone entries, you see a number properly formatted like this: (123) 456-7890, then you have likely solved your problem.
    9. Try calling your iPhone from a phone that is in your contacts list and see what happens.
    10. If this doesn't work, you will likely have to call Verizon or Apple. The Verizon tech support agent said that the issue has been sent to Apple for resolution. It may be something amiss in the initial install of iOS to the Verizon phones. Who knows, but this is defnitely a software issue of some type.

  • DO we really use Servlet Filters in realtime applications where?

    DO we really use Servlet Filters in realtime applications where?
    Can any one give me somegood exampleor link where i can find required information.
    Regards
    Vijendra

    Yes people do use Servlet Filters in real applications. The most common usage is as a common entry point for security checks or for logging purposes.
    One thing you could do is search the forum for questions on filters. Often the poster has a problem that he believes can be solved using filters.
    If you want to learn how to develop filters check the Sun J2EE tutorial.

  • Scenario of such a Application where  Flex and Flash combination is used

    Hi ,
    I am seeing this a lot in Job portals where the companys are asking for the combination of Flash and Flex . 
    Can anybody please let me know where exactly a combination of such would be required generally .(Means i need a scenario of such a Application where in Flex is used with Flash ) 
    Please help , thanks in advance .

    Hi Kiran,
              Basically flex is invented for developing rich internet applications and adobe introduced flash concepts in flex and flex will run on flashplayer.. so indirectly u are working on flash environment... any u are asking for the perticular scenario...
                           Take one example i.e u have an application that is displaying several photos slide by slide in ur website. (  with some animations and other effects that are not available in flex).. at that time u can go for flash developing.. u need to develop that in flash and import that into ur flex application
                      visit ur Tour the flex web and there in flex4 we have some realtime scenarios where adobe already developed a dashbord to display the world map and the density of adobe site users.. they are using ibm ilogix for dashbord..they developed this components in flash and they have used that component in flex ...we dont have some animations that are available in flash and also u can develop some components in flash and import them into ur flex application as swc format.and u can use them in ur application
                      i think u got my point... for this u want have glance please go through the link below
                   http://www.adobe.com/devnet/flex/tourdeflex/web/
                there u have some dash board applications developed in flex and flash.. check it out ..

Maybe you are looking for