Contacts - Changing names of groups

How do I add a group name or change a name.

Binkme3,
Great question! To clarify, are you looking to change you change a group name on your contacts on your phone? If you are referring to the group contacts on your device go to Group tab, in contacts>Tap 3 lines to bottom right.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Changing Mail, contacts, calendars name field

hello probable something simple but how do i permanently change the Name Field in the "Mail, contacts, calendars" setup.
I press details to enter my own but each time i do the name field is over-written with a previous owner or user of the mac.
Until this is complete i cannot sync contacts and calendars as i want to, using OS X Mountain LIon.

Go to System Preferences > iCloud
Sign out of the current Apple ID
Sign in with your ID.
System Preferences > Users & Groups
Change name for current User.
However, I HIGHLY suggest that you create a new User and move all your data to the new User or do an erase and install.
1) Move to a new User. See directions here:
Move your data to a new User or a new Mavericks partition**
2) Backup your data to an external drive using clone software. While booted from the clone erase the internal drive and reinstall OS X.
**(Fair disclosure: NeedHelp4Mac is my site. I may receive some form of compensation, financial or otherwise, from my recommendation or link.)
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
You will need an external drive to create the clone unless your internal drive is large enough to create a second partition large enough to hold all your data.

SAP BCM changes name to SAP Contact Center

New name
https://www.linkedin.com/groups/SAP-BCM-changes-name-SAP-46603.S.5861499722405015552?trk=groups_most_recent-0-b-ttl&goba…
Contact Center Software | Customer Service Applications | SAP | SAP

I do not have a full confidence that I'm personally good with this. Explain why:
1. Abbreviation (I assume it will be SAP CC) will still be confusing. There is already a solution with the same abbreviation: SAP Convergent Charging. BCM was also sometimes confused with Bank Communication Management solution.
2. Contact Center will probably be confused with SAP CRM Interaction Center solution/functionality. I can imagine a statement in some PoCs or other documents: "Integration of SAP Contact Center with SAP CRM Interaction Center". And if somebody will forget to put "SAP CRM" in this statement and will use simple "SAP Interaction Center" instead. Oh yeah...
But I should admit that I don't have other suggestions... The new name is certainly clearer then previous one. And it's already renamed anyway.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts if changes on all computers.

How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.

you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900.

Changing existing Material Group user defined names to new mat groups

Hi Gurus,
My client is using conventional Material Groups user defined names for ages in their system.
Now they have requested us to workout for switching over to UNSPSC material groups Global Standardization.
While carrying out the exerice, they have asked us to completely clean up the entire system to replace the new material group with old in all Masterdata, transaction data including statistics table in pr, po, stock and in everything
If any one of you have carried out this exercise and if you have any useful documentation, please inform me
Thanks and Best Regards,
Mohan

Hi,
If you change the Material groups in Material master the system the system will not update the PR/PO/Stock or others.
You need to change all the documents to update the New Material groups.
For Material master update you can use the LSMW.
You can update the PR/PO also but if the PR/PO is subjected to Release Strategy then you need to derelease then change the material group then update and if it is based on the Material group then while update the new release strategy will apply and you have to change everything.
Think of that if you have huge data then it is very difficult to change all the documents. if the data is Less you can proceed .
Instead of deleting old material groups just add the new material groups and use them in future for all your process.
rgds
Chidanand

Change a Wiki group name?

Hello.
We've had a wiki set up for a certain group and I'm now required to change the name of said group. I set up a test group called "Test Group", created a wiki for them, then I changed the group name/shortname in WGM, but this new name isn't reflected in the wiki.
So, wondering, how do I go about making a change to the group name and have it reflected in the wiki?
Thanks,
Kristin.

i had the same problem, and found a solution which worked for me. some of these steps may not be necessary, but i'm not sure which, so...
1. in workgroup manager, turn off the services and save the group.
2. then, change the shortname (and long name if you wish), and save the group.
3. then, re-enable the services and save the group.
4. stop and restart the webserver and the wikiserver (see below)
5. use a browser to view the brand new, empty wiki for this group, which also creates the folder for the wiki in /Library/Collaboration/Groups
6. on the command line, become root and change to the /Library/Collaboration/Groups directory. in there, rename the new group folder to something else
7. rename the old group folder the new group name
8. inside the old group folder (with the new name), remove the index.db file
9. change all the plist files in this directory and any subdirectories to update the file locations to the new directory... (see below)
10. stop and restart the web and wiki servers (as #4)
11. use a browser to see the old contents under the new name
for items 4 and 10, i created the following script to make it easier for me...
#!/bin/tcsh
+if ( $uid != 0 ) then+
+echo 'must be root'+
else
+serveradmin stop teams+
+serveradmin stop web+
+sleep 2+
+serveradmin start web+
+serveradmin start teams+
endif
for item 9, as my wiki had nearly 150 pages, i didn't want to edit every file by hand, so inside the group folder i used the following command
sed -e '/oldgroupname/s//newgroupname/' -i .bk `find . -name \*.plist`
obviously, i didn't use "oldgroupname" and "newgroupname", and that command needs to be run as root.
that will use the find command to get the names of all the plist files, and sed will edit each file, changing all instances of the oldgroupname to the newgroupname, and keep a backup of the original plist file with a ".bk" added to the name.
hope this helps.
cheers,
russell

Contacts changes notes in intelligent groups (heavy bug)

I organize my 2.700 contacs with Contacts. But there is a heavy bug by filtering contacts with an keyword in the note section:
If I display an intelligent group and I change only one contact's note with one word, Contacts changes every note in the following entries (alphabetically ordered) with the same word.

Maybe this will solve it: https://discussions.apple.com/message/20452364#20452364

Frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through m

I guess I was not clear.....my fault....let me re-phrase: frequently I send an email to multiple contacts.....I'm constantly changing my selection of multiple contacts so using the "group" function doesn't get the job done.......so how can I go through my list of contacts and quickly select those contacts that I want to receive that particular email....thx

You need an app that allows group messaging. Enter group messenger in the search bar in the app store.

When sending a message to a contact, the name changes to a phone number

WWhen sending a message to a contact, the name changes to a phone number

I can tell you that with Sprint their coverage area isn't as good as Verizon or AT&T.
Are you sending these imessage while on wifi or cellular data? Also your husband would need to be in a good coverage area.
Usually when imessage is unavailable it will send it as a text. Does your husband receive your imessage as a text?

How to alter the display names of grouped items in a document library?

Very odd issue I want to sort items in a document library by the value in a field, that is no problem. The issue is I want them display NOT in alphabetical order for example I have a list that is grouped into 3 groups (Cases, Forms and Support). When you
look at the page they are grouped in alphabetical order from top to bottom, I want them to show up as (Cases, Support and Forms). I tried creating column with with a value 1,2 or 3 with the "3" value attached to "Forms" items and the "2"
to the "Support" item them sort per Grouped value and that works BUT the grouped names appears as "1" "2" or "3". I need them to show as (Cases, Support Forms).
I was wondering if there is syntax to alter the display name while editing within Designer similar to the syntax used to change the display name of a long hyperlink when quoting it in an email or forum submission??
I want:
<FieldRef Name= "Grouping"/> to diplay the three groups by names other than the values in that column, the display names.

Hello,
This might be helpful:
http://sharepoint.stackexchange.com/questions/78958/change-header-on-group-by

Unable to Change Vendor Account Group

Hi All,
             Due to certain client requirement, Account group for few vendors was changed from ABCD to BLCK (Blocked). Now the clients have come back and asked for the Account Group to be changed back to ABCD.
However, when I go to T-code XK07, it displays the below note prior to change.
Vendor - ELMORERA
Acct Group - BLCK
"when changes made to acc. grp, this is to be maint. for"
Company Code    Company Name    Purchasing Org   Description
X000                      X Ltd.                     1000                 Purch. Org
However, once I enter the account group (ABCD) to which it needs to be changed to, I get below information.
"you cannot make this chage because the new account group results in the following field groups being switched off".
Group   Group name              Modification Group   Group Name
D310      Purchasing Data       041                           Account with Vendor
Can someone please help me with this. We have about 1300 vendors with whom we are facing this problem.
Regards
Suresh

Hi
Change vendor Master Data
FK05
To Block / unblock vendors follows this menu path :
Accounting >Financial Accounting >Accounts Payable
Master records > Block/unblock
VENDOR BLOCK/UNBLOCK: INITIAL SCREEN   ACCOUNTING
Enter the following mandatory fields:
Vendor : enter the account number of the vendor you wish to block.
Company code: enter company code
Press ENTER button
VENDOR BLOCK/UNBLOCK DETAILS ACCOUNTING
Select one of the following indicators:
All company codes : Selecting All company codes blocks/unblocks the vendor from postings on all company codes
Specified co. code: Selecting Specified co. code blocks/unblocks the vendor from postings against only the company code entered in the initial screen.
Press SAVE button
Delete vendor
FK06
To delete vendor account it need mark it for deletion.
Use Menu path :
Accounting > Financial Accounting > Accounts Payable
Master records > Mark for deletion
VENDOR MARK FOR DELETION : INITIAL SCREEN
Enter the following mandatory fields:
Vendor : enter the account number of the customer you wish to mark for deletion
Company code
Press ENTER button
Regards
udaya

Overnight my contact list went from 1492 contacts to 52.. With help from Apple support I retrieved all of my contacts. Here is the problem, I lost the groups. None of my contacts are sorted into groups as they used to be which is very important for me.

Overnight my contact list went from 1492 to 52. With help from Apple I retrieved the missing contacts using Time Machine. The problems is that the contacts are not in groups as they used to be. Any suggestions? I really need them grouped for business reasons.
Also, there are no longer pictures associated with each contact.
thanks for any help anyone can give me getting contacts back into the groups that I had established. By the way, the group names are still there, but they are all empty.
thanks,
Sparky

What Mac do you have, with what version of OS X?

Change name of function..?

I have 2 codes on 2 different keyframes i have just copy/pasted. I have changed all the name of functions and variables, I just need one function I don't know how to change name of.
code on key frame 1:
var timedelay2:Number = 10; // seconds delay in replay
var video2;
var nc2:NetConnection;
var ns2:NetStream;
nc2 = new NetConnection();
nc2.connect(null);
ns2 = new NetStream(nc2);
ns2.client = this;
ns2.addEventListener(NetStatusEvent.NET_STATUS,netStatusf2);
function netStatusf2(e:NetStatusEvent) {
    if (e.info.code == "NetStream.Play.Stop" && Math.abs(durationNum-ns.time)<.1) {
setTimeout(replayF,timedelay*1000);
function replayF2(){
ns2.play("film/film1.f4v");
var durationNum2:Number;
function onMetaData(iObj:Object):void {
    durationNum2 = iObj.duration;
video2 = new Video(287,263);
video2.x = 231.1;
video2.y = 140.5;
addChild(video2);
video2.attachNetStream(ns2);
ns2.play("film/film1.f4v");
code on key frame 2:
var moviesA:Array =["film/film1.f4v", "film/film2.f4v"];
var movie:String = moviesA[Math.floor(Math.random()*moviesA.length)];
var timedelay:Number = 5; // seconds delay in replay
var video;
var nc:NetConnection;
var ns:NetStream;
nc = new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.client = this;
ns.addEventListener(NetStatusEvent.NET_STATUS,netStatusf);
function netStatusf(e:NetStatusEvent) {
    if (e.info.code == "NetStream.Play.Stop" && Math.abs(durationNum-ns.time)<.1) {
setTimeout(replayF,timedelay*1000);
function replayF(){
ns.play(movie);
var durationNum:Number;
function onMetaData(iObj:Object):void {
    durationNum = iObj.duration;
video = new Video(287,263);
video.x = 231.1;
video.y = 140.5;
addChild(video);
video.attachNetStream(ns);
ns.play(movie);
problem is this function, I don't really know how to give one of the function another name so they don't interfere with each other...?
function onMetaData(iObj:Object):void {
    durationNum2 = iObj.duration;
anyone that can help..?

hey again
i'm now just using
var durationNum:Number;
function onMetaData(iObj:Object):void {
    durationNum = iObj.duration;
on frame 1. But it seems i've lost the randomness on frame 2. it only plays "film/film1.f4v" all the time even though i put multiply times "film/film2.f4v". Is this true, or is it just me who have been very unlucky..?
my frame 1 looks like this at the moment:
var timedelay:Number = 10;
var video;
var nc:NetConnection;
var ns:NetStream;
nc = new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.client = this;
ns.addEventListener(NetStatusEvent.NET_STATUS,netStatusf);
function netStatusf(e:NetStatusEvent) {
    if (e.info.code == "NetStream.Play.Stop" && Math.abs(durationNum-ns.time)<.1) {
setTimeout(replayF,timedelay*1000);
function replayF(){
ns.play("film/film1.f4v");
var durationNum:Number;
function onMetaData(iObj:Object):void {
    durationNum = iObj.duration;
video = new Video(287,263);
video.x = 231.1;
video.y = 140.5;
addChild(video);
video.attachNetStream(ns);
ns.play("film/film1.f4v");
stage.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(event:MouseEvent):void{
    if (event.target.name!=null){
        switch(event.target.name) {
            case "work1_btn":
            gotoAndStop("work1");
            removeChild(video);
break;
            case "contact_btn":
            gotoAndStop("contact");
            removeChild(video);
break;
            case "frontpage2_btn":
            gotoAndStop("frontpage2");
            removeChild(video);
break;
And my frame 2 looks like this:
var moviesA2:Array =["film/film1.f4v", "film/film2.f4v", "film/film2.f4v", "film/film2.f4v", "film/film2.f4v"];
var movie2:String = moviesA2[Math.floor(Math.random()*moviesA2.length)];
var timedelay2:Number = 0; // seconds delay in replay
var video2;
var nc2:NetConnection;
var ns2:NetStream;
nc2 = new NetConnection();
nc2.connect(null);
ns2 = new NetStream(nc2);
ns2.client = this;
ns2.addEventListener(NetStatusEvent.NET_STATUS,netStatusf2);
function netStatusf2(e:NetStatusEvent) {
    if (e.info.code == "NetStream.Play.Stop" && Math.abs(durationNum-ns.time)<.1) {
setTimeout(replayF2,timedelay*1000);
function replayF2(){
ns2.play(movie2);
video2 = new Video(287,263);
video2.x = 231.1;
video2.y = 140.5;
addChild(video2);
video2.attachNetStream(ns);
ns2.play(movie2);
stage.addEventListener(MouseEvent.CLICK, clickHandler2);
function clickHandler2(event:MouseEvent):void{
    if (event.target.name!=null){
        switch(event.target.name) {
case "frontpage2_btn2":
            gotoAndStop("frontpage2");
            removeChild(video2);

How to change name of software component version in IR and ID?

Hi All,
I have a scenario in which 50 interfaces are there.All interfaces are working fine and we are in Testing stage.
I need to change name of Software component which I have used in IR.
I tried with release transport. I am able to pass all my mapping programs and everything under new software component name. But in ID all configuration objects contain IR objects (Like interface mapping) with old software component name.
Do I need to change everything in ID manually or is there any other way for this?
Thanks in advance.
Warm Regards,
Gouri

Gouri,
If you check this blog , you are able to transfer data even without IR content, i.e, there is no message interface , no namespace in IR and stil this works. Reason, there is no validation if the message interafce exists in the IR. In the runtime the SOAP Header is filled with the interfacename and namespace and it uses these values.
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Likewise, irrespective of which SWCV the interface name and namespace is, things will work fine as long as they exists in the IR in your case.
The SWCV is a means to group objects, it might be displayed while doing the manual configuration but it doesnt matter even if you just key in the values without using the help.
Things will work fine.
Regards
Bhavesh

How to change the account group of a customer master?

Would like to change Ship-to's to Sold-to's. I know the transaction XD07, but when trying to promote a SH to SP, I receive the error
The planned change is not allowed as the following field groups would be masked by the new account group.
Below the error the table displays Group Name PO Box City and Address.
How do i bypass this and successfully change the ship-to to a sold-to?

Hi ,
Chek out ur new account group for Sold to party ,whether all the fields in address tab is marked either optional /required. It should not be in display /supress mode then only u can successfully change ur SH account to SP account.
I think , Number ranges should be same.
if itz not da same number range system will give the message ,but it will allow to change the account group.
As I successfully worked in this issue earlier.
As we all know, we only change the account group from lower to heigher,
ie. sh,bp,py to SP only not viceversa.
*rewards if it helps

Contacts - Changing names of groups

Similar Messages

Maybe you are looking for