Contacts don't show after firmware update (V05.23)...

After a firmware update I can't restore my contacts.
If I tried to enter them manually, I have the message "Contact saved to phone memory" but my contact list stayed empty.
Apparently they are really saved somewhere in the phone, since I can see them if I synchronize my phone with my PC. Bt there is no way to access them from the phone.
Anyone had a similar issue before ? 

Very same problem with my 6730c. Updated firmware from Menu > Settings > SW Update. Now I fully cannot access my contact book (all contacts are stored to SIM card). These can be used from any other phone. When a person from contact book calls me it shows name. I can only call people who called me and so saved to Logs. Please update firmware as soon as possible, I wish to use my phone

Similar Messages

  • Ovi Maps 3 don´t start after firmware update (6220...

    Hello!
    a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
    After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
    But Nokia Map Updater says, there are no updates for my maps.
    What´s wrong?
    Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
    thanks

    Hello!
    The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
    But in the meantime I have found a solution!!
    I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
    I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
     thanks
    sorry for my bad English

  • Restoring after firmware update - Ways :)

    Hi All,
    Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware.  I would like all to discuss to come up with some ways to restore their applications after firmware update.
    Before updating firmware
    Customer can backup his phone using Nokia PC Suite's Content Copier application.
    He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
    For his Contacts he can sync with pc suite supported sync applications.
    Messages he can store in Memory card and he can make a backup of memory card in PC.
    If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
    For Music he can use Nokia Music Manager or Nokia Music.
    Once after updating his firmware, if he is unable to restore he can get those from above said applications.
    If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
    Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

    Hi,
    If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
    you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
    Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth.  Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
    Its better to skip memory card backup while backup-ing other Phone data for faster backup.  Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
    Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
    Hope this could help
    I welcome our experts to add more details related to this topic.

  • Problems after firmware update 52.0.007

    Hi,
    I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
    But now I have following problems:
    I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
    The Radio app. is gone
    Does anyone has a solution for this?
    Iwan

    It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
    Happy to have helped forum with a Support Ratio = 42.5

  • Data recovery after firmware update

    Hi guys,
    does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
    thx.

    if you didn't backup them, there is no way to recover them
    Greece Nokia X6 RM-559 v40.0.002

  • I have 5 iphones on one account and all contacts have merged together after the update

    I have 5 iPhones and they are all on the family plan, so we all use the same account and now all of our contacts have merged together after the update to ios5. What do I do?

    your iCloud storage isnt part of your phone, that is a back up for your phone, you have to delete things on your phone, so I recommend backing up your photos to your computer or iCloud since im sure thats whats taking up all your storage, then delete the photos on your phone and then update your phone using iTunes on your computer.

  • HT201407 "Your iPhone could not be activated because the activation server is temporarily unavailable." this massage showing after i update through itune

    "Your iPhone could not be activated because the activation server is temporarily unavailable." this massage showing after i update through itune

    See this discussion.
    https://discussions.apple.com/message/21189708

  • Where did the "plus" button go to add contacts.  It disappeared after I updated my phone.

    Where did the "plus"button go on my iphone to add contacts? It disappeared after I updated my phone.

    The iTunes app cannot disappear ... it may be on a different screen.
    Regardless, you can force it to your home screen by doing:
    Settings > General > Reset > Reset Home Screen Layout

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

  • After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

    Hi
    After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right. 
    I can't see menus, just version number and the basic setup page.
    Router Linksys WRT160 v2.
    Allan

    Hi
    Thanks for the reply.  
    I't works ok now.  
    Thanks again.
    Allan

  • Lost Contacts After Firmware Update

    Hi,
    I'm after a bit of help if anyone has any advice.  I flashed my N900 this weekend with the latest firmware update (it was Vodofone specific so had to flash it to the latest UK version).  I restored the backup after completing the firmware update and everything was great.  Hooked it up to PC Suite, ran the sync and it matched all 300 contacts.
    Last night I tried to edit a contact detail and it kept coming up with an "internal error" message.  I managed to do it by chaging the detail on my PC and syncing the contacts.  But today, when I looked for a contact my whole contacts list is gone!  It's wierd because my recent call history still shown names, but my contacts list is empty.  I synced my phone when I got home from work, but Nokia PC Sync completes the sync but I still don't see the contacts on my phone.  All the contacts are on the PC still.
    How can I fix this?  Any help will be much appreciated.  Thanks.

    No, none were on the sim card.  I ran the backup before the firmware flash and then restored after the flash.  That was fine for a couple of days, but now I have no contacts showing in my contacts list.
    When connected to PC Suite I can see all of the contacts from the PC, but when I look on the phone the list is empty.  This is why the sync isn't doing anything because the PC can still see all of the contacts.

  • 5.0.1 update: contacts don't show up.

    after update to 5.0.1 my contacts' names don't show up in text or phone call views so when i get a text it just looks like a number i don't have saved. Any ideas? FYI I updated via wifi for the first time

    Same problem here - very annoying!

  • After Firmware update for my 5th gen ipod computer no loger recognizes ipod

    I updated the firmware for my ipod (a pop up informed my after connecting my ipod that a firmware update was available) waited 20-30 minutes my ipod stayed lit with the "do not disconnect screen" After it rebooted itself -accordingly to part of the update's description. THe ipod never showed up on the ipod dock again nor on my computer's desktop. There are no longer any ipod tab is missing in the itunes prefs as well. I went to disk util -NOTHING- My computer no longer recognizes the ipod -not even as a generic drive. Ive tried different usb ports no dice. Tried the reset on my ipod, tried rebooting my computer several times. I am running the latest version of Itunes 7.01. I purchased my ipod and computer around (last April or May). HELP!

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • M5035MFP displays Permanent Storage Write Failed after firmware update to 48.301.7

    After updating the firmware to 48.301.7, I have two M5035MFP machines that are displaying "68 Permanent Storage Write Failed" error messages. The users can press Continue and printing will proceed normally for another 10-50 pages when the message will appear again. The NVRAM and HDD have been reset/intiliased and they have been powered off/on several times.
    This is also occurring on two other different models (6040MFP/9040MFP) which also started showing up after a firmware update about the same time.
    Could this be a failed update? How would I go about downgrading to a previous firmware version?

    Hi Rwelper,
    I want to share with you this solution: 
    Please try first to reseat the Formatter/HDD and the memory DIMM and install the correcly then try:
    First it is not adviced to downgrade the firmware at this step, you can try a cold reset and upgrade firmware again.
    here, you need to remove the existent Firmware file on your PC and try to download it again from the HP Website, thus you can instaltly disable the firewalls and the antivirus and do this action.
    NOTE: You can try a new upgrade firmware before you proceed with the Cold reset* of the printer.
    Cold reset (Format disk also can be performed if this don't work): You can check the printer's manual to know how to perform it.
    Please try an NVRAM init or Super NVRAM Init if this don't give a solution.
    All these manipulations you can find in the printer's manual
    Please note also that all these manipulations will delete all the current printer's configuration if it going to be working fine, so you will need to upgrade firmware and set your printer up again.
    ==> There is a need to delete files on the HDD / data on the DIMM, unplug and restart the printer.
    The final solution is to replace the Formatter then the HDD if all these solutions don't bring a result.
    Soudani
    I work for HP
    I hope this solution respond to what you need
    You can post a like if you like this answer

  • HT203547 Thunderbolt Display Screen Still Black After Firmware Update

    Mid 2014 15" MacBook Pro (retina), and Thunderbolt Display, under 1 year old.
    The Display stopped waking from sleep, but it seems to only be the backlight.  When using a flashlight, I can see the image on the screen.  My computer recognizes the Display is connected.
    The firmware update hasn't resolved the issue.  The article HT203547 is worthless.
    Many, many other similar issues are reported in the apple community forum and in the Apple Online Store reviews for the TB Display.
    I've had the Display repaired, having all of the internal components replaced.  Now, it's at an Apple Authorized Service Provider, again... for the same issue.
    Last time, it was in the shop for several weeks, as the technicians had trouble resolving the issue.
    Apple will continue to have it serviced and replace it, entirely, if needed.  But, that will have to be after their technicians repair the same parts 4 times.  I've barely gotten any use out of it over the past 2 months.
    But, if there are inherent flaws... what can be done?  Is there any way to get a refund/credit, after 6 months or so?

    Hello JethrofromBama,
    Thanks for using Apple Support Communities.
    From your post I understand that your iPhone's screen has no backlight, and is dark.  I'd like you to please follow the steps below in attempt to resolve this issue.
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    Take care,
    Alex H.

Maybe you are looking for