Contacts entry error

I wrongly entered Contacts names by putting christian names in the surname field. I got around this by reversing the Display Order but am now experiencing problems using Siri to call Contacts, etc. Is there any way to automatically reverse the entries or have I got to manually change each of the 90 odd entries?

FYI:
We were hitting bug http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCue60831
Solution is to upgrade to CUCM 9.1.2

Similar Messages

Random Contacts sync errors

We keep encountering Contacts sync errors. We are syncing two Macs/Lion and two iPads. There is no pattern as to where the correct contact entry was created - could by any of the four devices. We don't create on icloud.com, only use that for troubleshooting and manual repair.
I am 90% sure that all of these errors are of the form [change made to device] but [no change made to iCloud.com]. If the dbms on iCloud.com doesn't register the change it will obviously not be propagated.
Repair tip: but only if the "good contact" is on a Mac. Export the contact as a VCF to say desktop (only one works, no multiples). Then drag the "good VCF" onto the Safari/iCloud/Contacts window - slow and careful until you see the + cursor. Drop it there - audit success by watching for "Importing..." in the status bar.
Q1: Is there a way to generate a "differences report", at least pairwise - say Mac Pro vs. iCloud.com? This problem has been happening for at least a month - too long to rely on failing memories as to what changes have been made.
Q2: What about a Contacts report sorted by modification date (mod dates seem to have gone away)?
I've examined all of the Apple iCloud support articles - these are good for initial troubleshooting, but do not apply to this problem.

I am 90% sure I have resolved the cause of these sync errors. It was because our MacBook Pro and Mac Pro both had Address Book/Preferences/General/Default Account set to the local Mac contacts.
I have now changed the Default Account to iCloud. I hope this still works OK when we do not have Internet access (common as we live on our boat in the South Pacific).

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

Can multiple ringtones be set within one contact entry?

I'm in the process of updating contacts on my iPhone 4, and am assigning specific ringtones to a few people. I noticed, however, that you can only list one ringtone per contact entry--even though many of my entries have multiple people with different phone numbers (ie: a husband, wife, and kid). I even had to separate my mom and dad in my address book in order to give them each their own ringtone; but I can't list their home phone number in both contact entries, or it just plays the default tone. Is there a way to get around this without having to separate all the "couples?"

I am going to answer my own question here, I have just found out that by going into the gallery and picking a mp3 that I could "use the tone" as a contact ringtone! - Happy Days!

Why do I get "Missing signed entry" error?

I am distributing jar files that have been signed (by thawte). Sometimes, a certain build will throw up a "Missing signed entry" error when I try to launch the jnlp file.
Why does this happen?
I used add/remove programs (on Windows) to delete the cache.
I am really puzzled by this.
Anyone knows why?
thanks,
Anil

when I did a jar tvf on the obfuscated jar and compared output with a jar tvf on the unobfuscated jar, I found my mistake!
Anil

Contacts with Multiple Backup Assistant + Contacts Entries

I have read others with these same issues. Unfortunately, the responses they are getting have to do with having multiple contacts and joining those contacts. That is not the issue. The issue is that each contact has MULTIPLE Backup Assistant + Contact entries. Meaning, when you you start typing a name to send a text message to, it shows you multiple phone numbers for that person (only, they are all the same phone number). For example, if I start typing Zoe, it will show you contacts that match, it will have Zoe 555-555-5555 listed 6, 7, 8, or more times. But wait, that is the home number, how you keep scrolling them until you get to the mobile number which is also listed 6, 7, 8 or more times. When you go into you contacts and select Zoe, and then go to Edit, you see why - There are 6, 7, 8 or more Backup Assistant + Contacts entries!!! These duplicates are what we are wanting to know how to remove. My daughter has only one phone number, but when I click on the her picture in the favorite contacts widget, it shows 2 and they are both the same. Even the BAL #225 shows up EIGHT times!!!!! When you go online (to the Backup Assistant), they are all listed there too. HELP!!!!!!!

I have no prblem syncing multiple mobile numbers so I don't think it's a universal issue with iOS. The only difference I see is I am using CardDav instead of using the Exchange option. Have you tried it that way? You can urn off contacts in the Exchange account and add the CardDav account separately.

When I click on my address in my contact entry Google maps show diferent point at the map

Please,
On iPhone 4, iOS 5, When I click on my address in my contact entry Google maps show diferent point at the map

Do you have a WiFi only iPad?
If yes, go to another site, like say a Starbucks, connect to their internet and click on the arrow to show your location. If it is correct then your router is reporting incorrect information. Wait and the database will eventually be updated.

TS3988 I get an unable to contact server error when i try to sign in..I don't see where there are outages.

I get an unable to contact server error when i try to sign in..I don't see where there are outages.

I am also having this problem.
I'm trying to log-in from a PC. I tried both Chrome and Firefox and am getting the same error.

Nokia 5130 XpressMusic "Contact Service" Error

I used my phone extensively for a little more than a couple of years. Yesterday night the battery died and I connected the charger and started it. I got an error on startup saying "Contact Service".
Any idea what the problem could be and how to resolve it ?
I heard this sort of thing is normally solved by a firmware reflashing. But I need my contacts and calendar. Any way out ?

I already tried the removing battery thing. Didn't work.
Firmware was updated to the latest version only a few months back at service. And this happened all of a sudden. My network bar turned zero when I was travelling and I presumed it was because of bad connectivity. Reached home and connected the charger and restarted the phone. Got the contact service error.
Any idea why this sort of thing happened ?

HT201269 how do I merge multiple duplicate contact entries with cell home and e-mail entries

how do I merge multiple duplicate contact entries with cell home and e-mail entries?

Try linking cards:
Open any contact you want to merge, tap on Edit and look at the bottom part of it. You'll find 'Link Cards' and from there you may select the contact you want to link with the one you're looking at. So if you have:
Contact 1: John A (job)
Contact 2: Business Name (who is also John A but you saved it as a different contact)
Contact 3: Something else that's also John A
You can link all three cards into one. If you choose to, you may unlink them at any time, just tap Edit and then the red circle. Your contacts won't be deleted, but they won't appear under the same ID anymore.

E-Recruiting Workflow after Data Entry Error

Greetings,
The E-Recruiting Workflow after Data Entry Error enables you to change and internal or external application that was entered manually. If for example, you enter the application to the incorrect reference code, you can assign a different one. As a result the status of the original application is set to rejected with the status reason of "Replaced by new Application".
My question is why doesn't the candidacy also get set to rejected? Although the application is rejected, the candidacy is still in process and so this candidate will continue to show on the Candidate Shortlist for the requistion. There is nothing that I can tell that will stop a recruiter from continuing to recruit this candidate. I am thinking of changing the workflow to also reject the candidacy, but before I do that, I want to know if there is an error in my thought process here.
Can anyone shed some light on this?
Thanks!

Hi;
As far as I know this is how Acrobat works. You can try to post your question in the Acrobat Forms Forums, you might get more help on this specific issue there since this isn't unique to FormsCentral forms: http://forums.adobe.com/community/acrobat/forms
Thanks,
Josh

Set Field Focus After Data Entry Error

In a form created in Acrobat XI Pro (and distrubuted via Forms Central), I have various form fields (text, date, etc.). When the user performs a data entry error (e.g. incorrect date format based on date mask, etc.), the field focus is lost. The user must mouse-click into the field to set the field focus and re-enter their data. Is there any code that allows the app to return an error and set the focus back on the field returnign the error? Thanks / Todd

If you converted the PDF to a FormsCentral form then it's a FC issue, not a PDF issue...

DTP - Monitor Entry - Error PSA

I have a routine in a transformation to create a monitor entry if a certain field errors out.
I still want all valid records to be updated in the DSO, but just want to show that there was a failure.
If I use the setting "Valid Records Update, Reporting Possible (Request Green), then the DTP loads to the DSO with a request status of Green, writes the errors to the error stack, but does not show any warnings or labels stating there are error PSA.
If I use the setting "Valid Records Update, No Reporting (Request Red), then the monitor will create an entry stating the error, will add the errors to the error stack, but will not set the request status to Green to allow activation.
How can I determine if there are errors (below a certain threshold set in error handling), yet still set the DSO Request status to green (similar to 3.5 error handling, allowing valid records to update, but showing in the monitor that there are error PSA)?
edit
Routine is:
*selecting SAP User ID from PEMP_105 into 0TCTUSERNM (USER).
select single /BIC/PUSERID into RESULT
    FROM /BIC/PPEMP_105
    WHERE /BIC/PEMP_105 = SOURCE_FIELDS-PERNR.
*This will create a monitor entry/error PSA for any records that are not
*present in PEMP_105.
IF RESULT IS INITIAL.
      MONITOR_REC-MSGID = 'RSM'.
      MONITOR_REC-MSGTY = 'E'.
      MONITOR_REC-MSGNO = '799'.
      MONITOR_REC-MSGV1 = 'No User ID present in PEMP_105 for Employee'.
      MONITOR_REC-MSGV2 = SOURCE_FIELDS-PERNR.
      APPEND MONITOR_REC to MONITOR.
to skip a record
      raise exception type CX_RSROUT_SKIP_RECORD.
ENDIF.
Edited by: Cote Adams on Apr 2, 2008 11:52 PM

Your guess is correct, but I don't want to have Operations have to look at the error stack every night to determine if there is an error. I want there to be a symbol or entry in the monitor to tell them there is an error. Just like 3.5, when there are errors (less than the max number of errors), the valid records pass, but the monitor status shows a different symbol.

On the IPhone 5, is it possible to set up a Contact entry for a group of people?

On the IPhone 5, is it possible to set up a Contact entry for a group of people, and, if so, how?

"groups"
true... there are many basic functions in which apple loves to stay 10 years behind competitiors by design. my 2001 nokia could do that.

Contact entries

HI,
may I know how to see the contact entries I have in my Q10? I found that I have some missing contacts after sync. Please advise. Thanks.

Hey phangjs,
Welcome to the BlackBerry Support Community Forums.
At this point there are no options to see the exact numerical value of the number contacts on your BlackBerry Q10 Smartphone.
Please refer to http://blackberry.com/btsc/KB33254 “Some Contacts are missing within the Contacts application of the BlackBerry Smartphone” which may explain why some contacts are missing after the sync.
Also, depending on how many contacts were synchronized to your BlackBerry Q10 Smartphone, it can take some time to index and populate this information to be displayed in the contacts application.
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Contacts entry error

Similar Messages

Maybe you are looking for