Contacts freezing on iPad after software update

I have an iPad II running IOS 8.3 and sync with a MBP running 10.10.3
after updating the iPad to 8.3 and updating Yosemite, contacts freezes up and is completely useless.
any suggestions
this is not the first time I've had an issue with a Yosemite update. A couple weeks ago after updating Yosemite iTunes would not open.
earlier than that i actually had to replace the graphics card on my iMac, again, thanks to the upgrade to Yosemite.
In my experience Yosemite has been very buggy

Not sure if this applies in your case:
If you turn on Contacts while your Contacts app is synced with Google Contacts, Google syncing is turned off. You should keep it turned off while using iCloud for your contacts.
OS X Yosemite: Change iCloud feature settings
Have you tried turning contacts off then back on in Settings on the iPad
Settings->iCloud->Contacts

Similar Messages

  • Itunes does not recognize my Ipad after software update. says it is in recovery mode, Itunes does not recognize my Ipad after software update.

    After an ipad software update, it does not recognize my Ipad in Itunes.  Gives error 14. what to do?

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
    If you haven't synced to a computer them (from here) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • HT5957 APN settings don't save on my iPad after software update iOS 7.0.2

    Since the software update to iOS 7.0.2 my iPad 2 will no longer save my carrier APN settings.  I have spoken to the carrier (virgin) and have tried to reset the APN to factory default then re-enter the APN settings.  Nothing appears to be working and virgin told me it is the fault of the apple software update.  Can anyone help or can Apple please fix this ASAP? I can't use my 3G at all, only wifi and need 3G access while travelling.

    Hey Snuggle63!
    I have an article for you regarding this issue with your ability to upgrade your iOS device:
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/TS1275
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Unable to Restore my iPad after software update

    I just updated all Apple software and went to sync my ipad with itunes...it would not allow me to restore with my back-up information it kept saying there was an error while trying to restore. It gave me 3 options, cancel Restore to factory settings, or Restore with back-up (or something like that.).
    The only option I had was to restore to factory settings in order for me to get past it after the 10th time. I powered off (held off switch for 10 seconds) let it stay off for 5 minutes. I also powered down my Windows PC and then reconnected my ipad and tried to restore again. It still gave me the same error. So it looks like I have lost all of my applications and everything I had.
    I am now trying to sync again to see what I can do to retrieve all my data but it automatically canceled my sync!!
    Help!! All of this because I tried to update to the new software? I LOST everything!!!!!
    Please help me get my ipad back the way it was (all of my apps and personal information)!
    Thank you to anyone with answers!!
    Lil Missy...

    Here is the work around:
    When and if you get the same error it will prompt you to select one of three choices:
    You have to select the LAST choice ---either Cancel (if you do this you will keep going around in circles), Restore to YOUR settings (which is really a trick question), or Restore to Factory (sorry I can't recall exact language)
    Then in itunes select your ipad under "Devices" if it doesn't automatically...(YOU CAN SKIP TO #5)
    There will be 3 Boxes in the "Summary" screen for you to choose from:
    VERSION: DO NOT SELECT RESTORE, BACK.. I selected "Back up to this computer", OPTIONS: click on which ever box you desire (I did #1 & #2). Then I selected "CONFIGURE UNIVERSAL ACCESS" and hit "OK".
    In the bottom right hand corner you will see two choices, select "SYNC" and your ipad & computer should start the syncing process which could last a LONG time depending on how much data you have backed up.
    Sorry if this doesn't work for you but it's working so far for me! Good luck...and Apple please don't do this again! So very confusing!

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Missing contacts after software update

    Contacts in iphone 4S disappeared over night after software update.  It is only showing contacts from my social sites such as facebook.

    Did you back up to the cloud, itunes, or email (like hotmail) before you updated?  If so, they are easily recoverable.  If not, then bye bye.

  • HT4859 lost contact list after software update

    Lost contact list on my phone after software update!

    What were you syncing your contacts to? icloud/google/gmail....

  • Restoring contacts after software update

    After software update i accidently clicked something like "treat as new iphone" instead of "use existing settings". Now I can synch programs and music but my contacts are gone. Is there a possibility to restore them?

    Unless you have been syncing your contacts with an app on your computer (Outlook, Mail) or cloud (MobileMe, Yahoo, Gmail, Exchange) as you should have, the contacts are permanently gone.

  • Mac mini freezes after software update install in leopard

    hello,
    ever since i purchased my mac mini 8 months ago, it freezes when installing a software update that requires a restart. it seems to get through the whole process, but then freezes with the default galaxy desktop (even though that is no longer my desktop) with nothing else on the screen. i have even tried doing installs over night, but it is still hanging at the galaxy screen when i wake up in the morning.
    unfortunately i did not deal with this when i still had my warranty and would like to avoid purchasing apple care.
    any ideas? thanks so much!
    joseph
    Message was edited by: Joseph Hallaux

    I have exactly the same problem. My mac-mini was purchased only a few months ago. I downloaded the most recent update recommended by software update. I don't remember everything that was in the update but it included several files providing support for various digital cameras and iphoto. My mac mini is frozen showing only a white screen.

  • Problem in curve 9320 after software update

    Hi, i had updated my curve 9320 with new software as recommended by blackberry desktop software. After the update i am facing many issues after software update:
    1. whenever I am trying to make a call or opening any message my phone power suddenly goes OFF and not starting till I pullback the battery and re-inserted.
    2. Some time automatically its battery got heated up and there is discharge of battery, but when i pull back and re-inserted battery it becomes normal.
    3. Email setup is not working, I am not able to add any email account. whenever I am clicking on email setup there is no reaction.
    please suggest what to do. I tried to go back to download old software but I am not able to get it anywhere online.
    regards
    iftekhar

    Hey iftekhar,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest backing up doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My computer couldn't find my playbook anymore after software update!!!

    After software updated to 1.0.7.3312, my computer couldn't find my playbook anymore.
    First couple time it could find normally as like before, few times later it could not anymore!!! LOL.
    I tried connect to the other PC either in my office and home several times, exactly same happen again.
    Anybody got same problem that I have? Please advice me.
    My computers have Window7, 32bit.

    Please review the knowledge base articles here:
    Article ID: KB27424 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Arabic language disappeared after software updater...

    Yesterday night I decided to update my mobile software using nokia software updater to solve a performance issue as mentioned in the website.
    I took a full back on my MMC then started the update.
    My mobile software version was 1.00.XXXXX and the new release is 4.XXXXXX
    The update completed successfully, but after I restarted the mobile I was shoked of the following issues :
    - The arabic language disappeared from the phone lagnauge selection.
    - MMC requested a passrowd to ulock it !!! while I dont remember that I set a password for it or I may set it once long time back but I forgot it now.
    I'm surprized for what happened as I had a discussion last night with my father regarding Nokia trust relation ship .
    Please advice how can I solve my issues ASAP.
    All my contacts are backed up on the memmory .

    read this :
    /t5/Software-Updates/Language-changed-or-missing-after-software-update-sticky/td-p/265903
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Restoring purchased apps after software update through itunes

    restoring purchased apps after software update through itunes

    And....that's your question? How to restore the apps? Sync your iPad with iTunes and the apps should be restored to your device. Or go to the purchased tab of the App Store and tap on Not on this iPad and download them again.
    Did you restore from a backup after you updated? Can you provide any information at all?

  • HT204074 I have iPad 3 16 giga I have a problem in access or activate iPad after the update to the iPad ois7.1.2  And asks to activate .

    I have iPad 3 16 giga I have a problem in access or activate iPad after the update to the iPad ois7.1.2  And asks to activate .
    what is the solution

    Did you update via settings>general>Software update? Via iTunes?
    Is the iPod connected to the internet via wifi?
    Try connecting it to your computer and then try restoring
    Is it asking for Apple ID and password?

  • ITunes stuck at preparing iPad for software update

    As shown here, iTunes is stuck at "preparing iPad for software update."
    It hsd been here for over 3 hours. The iPad itself seems normal and doesn't show a sync indication or anything else.
    The is iTunes 11.1.3 (8) on Max OS 10.9 Mavericks.
    The iPad is iOS 7.0.3.
    I cannot quit iTunes, but as noted, the iPad appears to be normal, like nothing is really happening.
    Suggestions?

    After being stuck in iTune with status bar saying preparig iPad... I went to the iPad where settings had a red 1 and I press and went into settings. It said that there was an update to the software waiting. I thought that was strange because I had started it from iTunes. so I went head and pressed to start the update from the iPad and it did it and completed the update in about 2 mintues. I know if I had unplugged the iPad or stop iTunes or rebooted it would have corrupted the iPad and I would have had to reload everything again. That's because it happen once before like that. So I hope this works you someone else out there...

Maybe you are looking for

  • Data Transfer between two internal tables

    Hi SDN, If I have two internal tables itab_a and Itab_b and I want to copy a subset of itab_a to itab_b using a conditional statement, is it possible and how? Second, what if I want to append the smaller internal table itab_b to itab_a, how would you

  • Help SQL syntex...

    hi all, i'm want bellow result by use SQL sytex. A B A-B-C A-BC -->select * from A ,B where A.A=B.B ; A B A results: A-B-C=A-BC,A B=A etc... A column and B column is'nt equal.so according to use SQL syntex which is INSTR,SUBSTR etc... , i'm want to h

  • Mail replies won't send in OS 10.8.3

    Replies to mail messages that have a link within the message won't "send" unless I delete the link and any other messages beneath the message I am replying to .  Message hangs up in activity window . I've checked with my ISP and all is fine there.  M

  • Lightroom 3 et Photoshop Element 8

    Bonjour, Je viens d'installer dans  mon ordinateur Lightroom 3. J'avais déjà d'installé dans mon ordinateur Photoshop Element 8. Quand je veux transférer des photos de ma caméra Canon T1i vers Lightroom 3, c'est la fenêtre "Téchargeur de Organiser" d

  • I duplicated all the pictures in my library. Is there any way to delete the duplicates at one time without going and deleting them one by one

    I duplicated all my pictures. Is there any way to delete the duplicates without deleting them one at a time. I now have 44,000 pictures and have 22,000 duplicates