Contacts Group not working in Mail

Prior to upgrading to Mavericks, if I wanted to send an email to a Group (created in Contacts), I would type the name of that Group into the "To:" bar, press enter, and it would populate with the corresponding email addresses. This is no longer working. When I type in the name of the Group and press enter, the text disappears and no email addresses populate. I have confirmed that the Groups still exist in Contacts.
Any suggestions?

in fact its work like before, its just doesnt "show" and the text you enter just look like text and not like an blue bubble as before, so type your group in the to" field like before and send like before without seeing the individual name of the group member. clear ?!
J

Similar Messages

  • New groups not working in Mail

    Hi,
    After moving to iCloud, Lion and iOS 5, newly created groups in adresbook don't work in mail.
    Groups i set up before I moved work fine. I can see the group when I start typing the name in Mail, but it doesn't ad the contact info after i confirm.
    Any suggestions?

    I thought to simply delete the account from Mail and start again, *but it appears that I cannot even do that.*
    Why not? What is stopping you from doing so?
    Try the Mail "rebuild" setting - Mail/Mailbox/Rebuild
    Message was edited by: CMCSK

  • ICloud Contact Groups Not Working on iPad

    I made a contact list on iCloud.com via my Mac Book (OS X Yosemite).  The groups I created there do not work with iPad Air 2 mail. They show up on the iPad, but I cannot send emails to my groups.  What do I need to do to make groups work?

    Maybe the backup is corrupted.
    Turn off iCloud backup and try deleting the iCloud backup for the iPad.
    iCloud: Remove an iOS device backup from iCloud - Support - Apple
    Then turn it back on and try to backup.
    You can also try removing your iCloud account from the device and then re-add it.
    Note: This will cause you to lose everything but the last 30 days of photos in your My Photo Stream so take precautions.

  • IOS-6 contact "Groups" not working

    After I installed iOS-6 on my IPhone-4, my "Groups" do not open on my contact list. Syncing doesn't help. What to do?

    Was all of your contacts saved directly on your phone? I notice that now in the 'groups' there is no longer a way to display all your contacts - it only shows your existing groups. For Example, I have a lot of contacts on icloud and about 20 that I saved directly on to the phone (ios5) - now it only displays the icloud contacts and there is no way to display the contacts saved directly on to your iphone. I can however see the contacts exist, since when I try to send them a mms, it shows up in the messages app- it is just weird. Try and see if you can see your contacts in your 'Messages' app.

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail and Contacts  do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

    I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail (crashes) and Contacts  do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Groups does not work in Mail under Mavericks

    Its not just smart groups, by I cannot get any of my Groups to work with Mail under Mavericks.  I am weary of having to type out the address for each person separately.  Is there some better way?

    I don't know why typing he name of a regular group does not work for you, but…
    Another way is to open the address panel, select a group, then select all in the group, then click the two button.

  • Add to Address Book not working in mail.app

    On all my computers : MacBook Air and Mac Mini, the Add to Address Book (command + Shift + Y) is not working in Mail.app.
    It doesn't add the email and name in the Address Book (now called Contact).
    Is this a broken link ?
    Best. StG

    Hey Saint-Georges -
    I've got the same issue in the console.  I didn't notice the keyboard shortcut not working but that's happening to me as well.  
    I've gone gone through and repaired the disk and disk permissions.  Still no luck.
    Hopefully someone has a fix.
    Rob
    From the Console:
    6/3/13 5:27:53.922 PM assistantd[4667]: <Error>: Daemon - Sync chunk denied! Canceling sync. [SASyncChunkDenied
      aceId: "26234165-b039-4219-af4d-8f4fa5561ebd"
      properties:
        callbacks: <empty array>
        errorCode: 0
      group: "com.apple.ace.sync"
      refId: "3274A842-6638-4E54-AFB3-F669BCCED462"
      v: "1.2"
      class: "ChunkDenied"]

  • Response Groups not working

    Hi there
    My environment is a single Lync 2013 Front End Server installed on Server 2012.
    It works since a year and now we want to use some response groups. I created 2 of them and everything seems fine but i cant call these groups. Not from internal and also not from external.
    The clients shows an 500 internal server error with ID 26017.
    So i traced the whole thing on the Front End Server. It seems the Response Group Service cant work with the local SQL Server. I see three error messages.
    1. TL_ERROR(TF_COMPONENT) [2]0B90.37A8::07/23/2014-06:38:39.119.000002fb (RgsClientsLib,MatchMakingLocator.GetActiveInstanceFromDB:683.idx(479))
    (0000000000150BA8)No instance registered as the active instance!
    2. TL_ERROR(TF_COMPONENT) [1]1E08.2910::07/23/2014-06:38:42.462.00000a34 (RgsHostingFramework,CallControlManager.HandleAudioVideoCall:2049.idx(619))
    (000000000362D054)Call is declined because Call Control is not started.
    3. TL_WARN(TF_COMPONENT) [1]0B90.0B7C::07/23/2014-06:38:48.053.00000f2d (RgsClientsLib,MatchMakingLocator.GetActiveMatchMakingInstance:683.idx(301))
    (0000000000150BA8)There is currently no active MatchMaking instance in the pool.
    The Lync Server Event Log shows this error when the Response Group Service starts:
    LS Response Group Service ID 31067
    Lync Server 2013, Response Group Service Match Making could not find the Contact object used for subscribing to agents' presence.
    Cause: The application has not been properly activated or the Contact object was deleted.
    Resolution:
    Deactivate and then activate the application for this pool.
    Is there a way to reinstall / reconfigure the whole response group service incl. the active directory objects?
    I hope somebody could help
    Regards
    Andreas

    Have you seen this thread:
    http://social.technet.microsoft.com/Forums/lync/en-US/cd25ddec-6e1e-4d58-9a9a-a530abfa82e3/response-groups-not-working?forum=ocsclients ?
    He ran Get-CsApplicationEndpoint and received a warning that let him to a resolution.
    Short of that, I'd rerun step 2 in the deployment wizard and restart services when you can to see if I could jog anything loose.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • Sound alerts not working in Mail and Ichat apps since upgrade to 10.4.9

    I just noticed my Sound alets not working in Mail and Ichat apps since upgrade to 10.4.9.
    I'm using soundsticks which is playing sounds thru quicktime, itunes, etc but my alert sounds for getting new emails and IM messages is not working. I get the quick "white flash" on the screen instead. I checked the prefs on both apps and it is set to give me the alert sound, I can even test it in the ichat pref when I change the new message alert sound it will play it thru my speakers but when I get a new message in either app it just gives me the white flash.
    I'm read that it can be an issue of not having the balance in the system sound pref set the middle, so I checked that, restarted, all that but still no luck.
    I really like the sound alert features because I can be in another part of my house, turn the sound way up and I'll know when one of my clients is trying to reach me but now I can't do that.
    Any ideas?
    Thanks in advance!
    Brown.Recluse

    Ok, weird, strange...did ONE more restart and now its working fine...who knows?
    Me

  • Hyper links do not work in mail

    Hi All,  Since updating OSX Hyper links do not work in .mail.  I can find no preferences that would affect this.

    Hyperlinks in mail not working
    Mail links do not open in Safari automatically

  • RSS not working in Mail after MobileMe instal

    The title pretty much says it all "RSS not working in Mail after MobileMe instal" The names of the RSS feeds are still there but all have the triangle error message beside them.

    you may have already tried this but in the mailbox menu at the top, try to take all accounts offline then take them all back online again. if that doesn't work you can always do a rebuild which is kind of a pain, but it usually does the trick.

  • LDAP Autoaddressing not working in Mail

    I have LDAP directory services set-up in Mail and it works perfectly when doing look ups directly from Address Book. It was working fine from within Mail at first but I seem to run into times when the autoaddressing feature does not work in Mail at least not using LDAP. I have autoadressing enabled in the Mail preferences and as noted, LDAP clearly functions as I can use it successfully from the Address Book look-up function. Any ideas? Thanks in advance for your assistance.
    Matt

    Hi Maria,
    as far I know the application is designed a way, that once there is an empty email this will not be sent at all.
    Could you therefore first test the mail form - you can test it with a business partner with the mkt attributes assigned:
    If this gives an empty mail, with the text elements not available the issue is related to the conditions of the text fields. You then need to check the conditions.
    Alternatively you can try to add any text to the mail form that is displayed independently from the conditions - the mails should then be sent even for the business partners with mkt attributes assigned.
    best regards,
    Johannes

  • Mac Lion. Search function does not work in mails.

    Hello,
    I already wasted several hours trying to find solution for a problem which appeared with Lion, search function does not work, in mail at least.
    I was not using Leopard before and I am not a mac expert.
    (search function was already bad in the normal it was already bad in the normal 10.7 set up but at least it was working in mac mails).
    I tried reindexing via spotlight privacy settings (adding and removing HD) but does not work much better.
    I don't want to go to terminal, as as mentioned I don't know enough about mac to try this.
    What to do?
    Thanks,
    C.

    Anyone? Any ideas?

  • Groups not working in apple mail

    Hi,
    Since the update to 19.9.1 mail groups began working again, but now they've stopped.  It used to be I could enter the first few letters in the address field and either a person's or group's name would show up to be selected.  Not groups don't show up anymore.
    Any idea why?

    Hi!
    I have the same Problem... Did u try to delete the "Envelope Index"? ( got to Library/Mail/V2/... delete all files Envelope ... Close Mail before! and then restart Mail.)
    I tried that but nothing happen... How tu use Mail without search feature!!
    MacBook Pro late 2009, Mac OS Yosemite (10.10)

Maybe you are looking for

  • Mark waiting and cancelled tasks completed

    Hi All, is there sql somewhere that can mark certain tasks that are in waiting and canceled status to Completed? Thanx. Fred

  • How long should it take to upload pictures for iPhoto books

    I have created a book for Christmas on iPhoto.  The book is 100 pages.  There are two steps to the process of sending in your order. 1.  Assembly (which it assembled no problem, under 30 min) 2.  Upload (it shows a bar and a blue line moves as it upl

  • PSE 12 Installation Wizard Interrupted

    I'm having problems installing Adobe Photoshop Elements 12. I have already downloaded the bundle. The problem is right at the end of installation wizard. It says status is registering and then immediately does an action rollback. The message "The wiz

  • Why the web pages can't detect my installed flash player??

    I have just bought my laptop system last week, and flash player is already reloaded in my win 7 system. but i was having problems while visiting certain websites, IE indicate that i did not have a flash player,  but when i follow IE's suggested step

  • Premiere 2014 Crash on app start

    I recently updated my 2014 premiere pro, and now it crashes on the slash screen startup. the last thing it tries to load is the adobe.ImporterQuickTime I tried dumping preferences, and uninstall and reinstall, but no luck. Oddly the old Premiere CC d