Contacts names displaying but there no number inside the name

i have iphone4 i sync with my pc after that i see the  contacts on my phone in that contacts names all displaying but inside the name there is no number
regards
iqbal.s

For me this was a problem with the iMessage service.  Not sure why it is happening or what the "real" fix should be.  I do not use iCloud so none of my contacts exist there.
I simply turned off iMessage and now it works. (Settings - Messages - at the top iMessage)

Similar Messages

  • When I try to send a message, I can choose a name from my contacts but theres no number, email adrdress etc showing up?

    When I try to send a message, I can choose a contact ok but theres no info under the name, phone number, email etc.  Anybody have any ideas?

    I've been having this problem too, but here's the catch: originally it was only with my dad, and only sometimes.  Now it's dad and husband, every time!  Pix go through, via imessage, to everyone else, and they go through to dad/husband if I "send as text" after it fails. 
    And the other annoying thing- the blue bar will run all the way, and it will say "delivered".  So I close out of imessage. When I reopen it again, the "delivered" has changed to "not delivered" with the red exclamation point.  I just googled "imessage not sending photos" and founds TONS of people with the same problem, but no solutions.  (I have rebooted phone, reset network settings, with no luck.  I even had to backup/delete/restore my whole phone the other day for a different reason, and hoped that would fix it, but now it won't send to my dad OR my husband (who is on not just the same carrier, but the same family plan as me)

  • I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.

    I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
    ===Answer===
    Comment on usual method and solution, by a forum Moderator.
    As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
    # Open a new tab and type "about:config" in the address bar.
    # In the Search bar type: "newtab"
    # Locate and double click "browser.newtab.url"
    # In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
    # Verify that the value has changed and now all new tabs will be blank.
    See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99

    Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!

  • No sound in speakerpho​nes, but there is one in the headphones​.

    no sound in speakerphones, but there is one in the headphones. While changing the Vol for headphones - the sound in speakerphone gets alive!
    tried to reinstall IDT HD  audio drivers. doesn't help.
    HP 625 Notebook, win7-32

    Is the external drive formatted as Mac OS Extended (Journaled)? Formats such as FAT32 and NTFS will not work properly (if at all) with iMovie. Also, external FireWire drives generally work more efficiently than USB drives when editing in iMovie.
    If the drive is not formatted correctly, you will have to backup the files elsewhere, then reformat using Disk Utility.
    To check the format, in Finder right-click (or control-click) on the name of the drive (left hand column) and select Get Info. In the panel that opens you will see the format.
    Of course, formatting may not be the problem, given that you can at least see the video in the Event, plus get sound and video in the Project (which may be on your internal drive). But worth checking!
    John

  • Do a GI but no serial number in the system

    Dear Gurus,
    I have one scenario,lets say we have a data for the month of october 2009 and november 2009 ,the data means the serial number of material.the data before october 2009 already uploaded by consultant but for the rest they not upload it,maybe they dont have the data i think.Then,we need to do the GI base on the DO we get for the month of october and november 2009,but no serial number in the system.What step i should follow to do the GI.
    First,if i create the serial number,thats no history like PR,PO,GR and no stock will added in mmbe.that why cannot do the GI because no stock will added.
    Sir,can u tell me what is the best way to do this GI..
    Thanks
    /Shah

    Hi,
    You can not do GI if the serialisation procedure is maintaiend for delivery / issue. In this case, you need to upload serial number with the help of IQ01 / 08.
    If the delivery does not ask for serial number, then you can directly issue the material without serial number.
    Anand.

  • Calendar icon displayed but there is no event

    Hi, my LG Extravert shows the calendar icon indicating that there is an event for the current day even when there is no event for that day.  Since it doesn't do this if there is no event the following day. I think I may have set it to show the calendar icon the day before an event but I can't find that setting anywhere.
    Anybody know where that setting is or some other reason why it's behaving this way?
    Thanks

    Hi Michelle, 
    Thanks for the  reply.  I'm talking about the gray bar that shows alerts at the bottom of the home screen, above the icons for mail, phone, contacts, etc.  For instance, if I have it set to vibrate only then there's a little icon of a vibrating phone.  If I have it set to ring the icon is not there.  Likewise if I miss a call, an icon appears in the bar.  If no missed calls then no icon.  If I tap on the bar I get a list of alerts showing, e.g., 0 new messages, 0 new voice mail, 2 calendar events, etc.
    So my issue is that sometimes the little calendar icon is displayed on the gray bar but the list of alerts shows 0 calendar events for the day.  It's a little confusing.  So I'm wondering why this is happening.
    Thanks,
    Iver
    Sent from my iPad

  • I created a book at the Ibooks author. But there are pages where the number of the page does not appear. How I can solve this problem? I thank you very much for any tip.

    I created a book at the Ibooks author. But there are some pages which the number of page is not visible. What can I do to see the number of the page?

    Have you changed the template?
    Some pages may not have numbers in place as default.  If you have changed the page or the template page, you may have added a object which as pushed the number out of view, or an image may be in a layer on top of the text.
    If you select one object on the page...then go to Edit, select all, you should see the outlines of any content no matter that content may not be seen. Look at the bottom for a page width rectangle outline.. IF its there, you need to shuffle the content until you find that box, and use Arrange > bring to front.

  • Data is not being displayed into DataGridview until Clicked inside the cells

    Hi,
    On a windows form, I have a DataGridView, its columns are auto-generated every time. Data is loaded after the user click a data-load button. However this is NOT working well, the data is not displayed until manually clicked inside the grid cells. The following
    is the code. Could you please help? Thanks!
     private void ButtonTestGrid_Click(object sender, EventArgs e)
                for (int i = 0; i < 10; i++)
                    this.MainDataGrid.Columns.Add(TestHelper.CreateTextBoxColumn("Col" + i.ToString(), 120));
                Dictionary<string, object>[] data;
                data = TestHelper.CreateTestData();
                this.MainDataGrid.EndEdit();
                TestHelper.LoadGridData(this.MainDataGrid, data);
                this.MainDataGrid.Refresh();
     public class TestHelper
            public static DataGridViewTextBoxColumn CreateTextBoxColumn(string name, int width)
                DataGridViewTextBoxColumn column = new DataGridViewTextBoxColumn();
                column.HeaderText = name;
                column.Name = name;
                column.ReadOnly = false;
                column.Width = width;           
                return column;
            public static void LoadGridData(System.Windows.Forms.DataGridView grid, Dictionary<string, object>[] data)
                int index;
                foreach (Dictionary<string, object> row in data)
                    index = grid.Rows.Add();
                    LoadRowData(grid, index, row);            
            public static void LoadRowData(System.Windows.Forms.DataGridView grid, int index, Dictionary<string, object> data)
                string name;
                for (int i = 0; i < grid.Columns.Count; i++)
                    name = grid.Columns[i].Name;
                    if (data.ContainsKey(name))
                        grid.Rows[index].Cells[name].Value = data[name];
            public static Dictionary<string, object>[] CreateTestData()
                Dictionary<string, object>[] dataList = new Dictionary<string, object>[5];
                Dictionary<string, object> data;
                for (int j = 0; j < 5; j++)
                    data = new Dictionary<string, object>();
                    for (int i = 0; i < 10; i++)
                        data.Add("Col" + i.ToString(), i);
                    dataList[j] = data;
                return dataList;

    There are different ways to bind the datagridview control to it's datasource, the question is where and what is your datasource? Is it from a database or XML file, or is it built on runtime...etc? 
    Based on your explanation I can understand that the Datagridview is binding correctly in the code behind since the rows of the grid are created. Because the row of the Datagridview are created only while it is binded correctly to it's datasource. The issue
    of the display seems something different and strange.
    Try also this way by using DataTable one the common ways used:
    static DataTable GetTable()
    // Here we create a DataTable with four columns.
    DataTable table = new DataTable();
    table.Columns.Add("Dosage", typeof(int));
    table.Columns.Add("Drug", typeof(string));
    table.Columns.Add("Patient", typeof(string));
    table.Columns.Add("Date", typeof(DateTime));
    // Here we add five DataRows.
    table.Rows.Add(25, "Indocin", "David", DateTime.Now);
    table.Rows.Add(50, "Enebrel", "Sam", DateTime.Now);
    table.Rows.Add(10, "Hydralazine", "Christoff", DateTime.Now);
    table.Rows.Add(21, "Combivent", "Janet", DateTime.Now);
    table.Rows.Add(100, "Dilantin", "Melanie", DateTime.Now);
    return table;
    Then to bind the above Datatable to the grid control:
    this.MainGrid.DataSource = null;//To clear before bind
    this.MainGrid.DataSource = GetTable();
    Fouad Roumieh

  • HT1277 my email displays but will not open, just the spinning icon

    My email displays but will not open in my laptop or ipad.  I just keep getting the spinning icon.  I can recieve emails on my iphone.  Any suggestions?

    If Mail.app will launch on OS X and you can get to the Preferences settings and related, see the Apple Mail.app troubleshooting article for some suggestions.  From there, get that working, then compare the differences between what's working and connecting, and what's not — the Connection Doctor and the Activity window should give you a pretty good idea of where things are hanging up — if not directly what's wrong — when troubleshooting the OS X Mail.app connection.

  • No dialtone in right jack of Telephone Network Interface, but there is dialtone on the left jack

    Currently I have FIOS Internet and Phone.
    I don't have dialtone on all of my phones inside the house.  When I opened up the Telephone Network Interface box outside, there are 2 jacks labelled "test phone jacks".  I plug in a corded phone on the left jack, and I can get dial tone.  When I plug it in to the right jack, I don't get dial tone (and I tried several times).
    What does that mean?  Where is the problem?   The Internet is fine.
    Thank you.

    You have a bad ONT.  My digital voice line died about 2 1/2 weeks after installation.  Make sure you disconnect the copper line at the NIC to rule out any inside problem before contacting Verizon.  If you disconnect the copper at the NIC and still have no dial tone its Verizon's problem not yours,

  • I am looking for my Aurora profile on a hard drive which must be repaired but there is nothing in the default location.

    Hello All,
    Basically, my Macbook Pro died on it's a*se a month ago.
    The hard drive from said computer is readable but needs to be repaired/erased and reformatted before it can be used as anything other than an external hard drive.
    I have looked in Application Support for the Profiles folder but there isn't one.
    All I get in Application Support is a Mozilla folder which leads to Extensions and eventually one solitary Javascript file for Adobe Contribute.
    I have copied the "Contents" having right clicked on the Aurora application and shown contents.
    Will that contain all my passwords and bookmarks if I replace it when the hard drive has been formatted and reinstalled into my laptop?
    I would definitely like to get back the bookmarks as they were accumulated over some 8 years of Firefox browsing and many long hours of work avoidance!
    Any help would be greatly appreciated!

    chflags nohidden ~/Library/
    cd ~/Library
    open ~/Library/
    any luck ?

  • Request had transfer data but there are not in the Cube

    Good morning experts;
    I’m using the BI 7009 version (Business Content 7003).
    I just activate the BC from the 0CO_OM_OPA_1 datasource to the 0OPA_C11 infocube. I also had created a infopackage to upload data from R/3.
    The problem is that, in the InfoCube request, the data where transfer but not inserted. Checking the PSA all the status are green.
    What seems to be the problem?
    Regards;
    Ricardo

    Hi Ricardo,
    If you are using the BI version, you have to load the data into the PSA using an infopackage and then from there on you have to create a transformation from the datasource to the info cube and then using DTP(Data transfer protocol) you can load data into the cube.
    With BI the loading is 2 step process unlike that of the older versions where you can load data directly into the cube using an IP.
    Hope this helps you upto some extent.
    Regards

  • I can open iDVD and hear my project but theres no window of the project...

    I tried to bring windows to the front and tried closing and restart, start a new project, but only have sound and no project window. I can access all the menu at the top, just can't see anything. anyone know whats up with idvd? also trashed plist and still the same
    cheers

    Tom Gewecke wrote:
    (1) Were you able to view my website?
    Not the movie, it said I had to download something extra.
    (2) Why is it that I can view my website perfectly, but others can't?
    Probably because you have Flip4Mac or something else that handles the format not handled by QuickTime.
    (3) Are you saying that one of the formats shown on the website you mention might be compatible with more computers than the one I used?
    At least it should work with ordinary Mac's that have not added anything.
    (4) Do you know how I can find the format I used in iMovie? I think it's MPEG-4, but there may be more than one version.
    Sorry, no. Some iMovie forums are at
    http://discussions.apple.com/category.jspa?categoryID=141
    Thanks for the information. I'm going to quit for now, but tomorrow I'm going into town to buy a book on iMovie. I was able to use it to launch my website, but only with someone walking me through every step. There's a lot to know-and quickly forget-so I think I'll need the book constantly by my side. It's just not feasible for me to have to call Apple or write Apple Forum every time I get stuck. I'll just have to be able to do the necessary by myself--and with my book, of course. By the way, my friend with the PC was also told that she had to download something. Thanks again.

  • I'm not very techy, so be gentle! i am using midvd app to burn home movies to dvd from iMovie '11 version 9.0.9. It now burns the dvd but there is nothing on the disc. its not recognised by the iMac or any other dvd player.

    I was using midvd app(i never had idvd) to make home movies on dvd from imovie '11 version 9.0.9 with no problems before xmas 2013. ive just tried to make a new one today and it wont work.
    It seems to burn to the dvd (you can see a mark on the back of the dvd as if it has some info on it) but it wont play on imac (just says blank disc) or any other dvd player.
    I have tried reinstalling midvd app and also tried 2 other dvd creator apps and the same thing happens the app says its burning and the external superdrive whirs like its doing something but it wont play.
    The only thing i have done since xmas is all the updates to the operationg system and updated imovie (i didnt like the new version so went back to using the previous one)
    Any ideas - i am new to all things mac!

    When you export your movie from iMovie, are you choosing H.264? That is the only compression method supported by this miDVD. Youc an give this a try first:
    Use Share > Export to Quicktime > Movie to Quicktime Movie > choose Options and then make your choices in Settings, etc (you can choose whatever size your video is - mine was 720 HD at that time):
    If that does not work, I'd suggest going to their support site as they claim to be able to burn to DVD.... I just checked their site and here is their list of supported file types:
    http://shedworx.com/midvd-supported-file-types

  • Contact is hidden, but there - not sure what to do?

    Hi folks,
    Today I received an email from a new contact. I did what I normally do and ctrl-clicked on their email address in Mail and opted to add new contact to address book.
    But when I look up their name in the Address Book they are not there. Yet when I tried to add their mailing address (from within their email message) it would pull up their name as an existing contact. I added their address, and phone number. But still they do not appear in the Address Book.
    I have closed it and reopened. No luck. I've no had this occur before and did nothing different from what I usually do.
    I have tried adding them in manually. Then when I use the context menu to add an address and phone number to an existing contact it will show me two entries for their name. It does not matter which which I select to add this data to... it will not show up on the contact card I manually added for them in Address Book. I have to enter that manually also.
    Is there any way I can view and edit the address book database file manually to see if this "lost" contact card is there?
    With much thanks,
    Jonathan

    I fixed it by following this advice which was given to fix another issue:
    The problem seems to be with the AddressBook-v22.abcddb file. You will find it in ~/Library/Application Support/AddressBook/.
    First, I quite address book. Then, I removed the file, AddressBook-v22.abcddb, from the folder to another folder (I did not delete it at first just to be sure). Then I restarted Address Book. This worked and restored the ability to add a contact from mail.
    I also removed the MailRecents file from the same folder just in case that was the problem, but I think the issue was really the other file.
    Found this here: http://discussions.apple.com/message.jspa?messageID=10727711
    Any ideas as to what would cause this issue?

Maybe you are looking for