Contacts no Longer work after iOS 5 update

.. I can get to contacts but i no longer have a +  sign to add new contacts. sometimes it will flicker briefly and then disappear??? HELP?? i have done a restore and everything to no avail..

try and re add them if not go on itunes and back up your phone , if it becomes a really big problem go to the udate screen and hit restore, it will erase all upudates but should fix the problem, let me know if this helps

Similar Messages

  • Voice memo on iPhone 4 no longer works after iOS 6 update.

    Since updating to iOS 6, voice memo no longer works.  It kills itself upon launch.  If it doesn't do it automatically, it does it once I hit any of the buttons in it (i.e. record).  I've tried hard reset and regular restart.  Haven't tried restoring because I noticed it on my way to work.
    Anyone else have this problem? 

    I went to Apple and they helped me restore my phone to see if that would solve the problem and it did.  Essentially restoring wipes your phone and you start from scratch.  I was able to "restore from backup" and so I didn't lose anything. 

  • IPad 2 no longer works after iOS 6 update was interrupted

    I have an iPad 2, of which I chose to update through settings>general>software update. I hit install and after the progress bar filled up the screen turned off. I panicked thinking it shut off so I held the power button. Now the iPad loads the Apple logo for 15 seconds and turns the display off and repeats this cycle infinitly. I put the device into recovery mode and it had the iTunes logo, I plugged it into the computer and I then clicked restore, it then asked to restore and update, however after it claims to extract the software it then displays an error message saying "The iPad "iPad" could not be restored. This device isn't eligible for the requested build." How will I ever manage to fix this? Someone, please help!

    Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • HT6154 rear camera on iphone 5 not working after ios 8 update why?

    My iPhone 5 rear camera is no longer working after ios 8 update its just black I can see the flash choice the hdr and the timer but other than that it is a black screen

    Hi there fjci2003,
    You may find the troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch 
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • TS1591 my ipod touch no longer works since ios 6 update!!!!!!!!!!!!!  FIX THIS PROBLEM

    touch no longer works since ios 6 update!!!!!!!!!!!!!  FIX THIS PROBLEM

    Did you fail transfer all purchases to your computer before attmeoting to update?  not good.  ''You can redownload some itunes purchases in some contries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    You will need to restore.  If you are unable then read this:
    iOS: Unable to update or restore

  • HT6114 My double clicks no longer work after doing this update.  What happened?

    Double clicks in iPhoto no longer work after doing the update.  Trying to troubleshoot, but feeling dense in that I can't get this thing to work.  Any suggestions, please?

    Try this thread >   https://discussions.apple.com/message/23317566#23317566

  • Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • Apogee Jam No longer working after 1.1 update?

    My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
    Specifically what happens is:
    1. I open the garageband app
    2. I select the guitar amp
    3. I plug the Jam chord into Ipad (guitar is already connected to cord)
    4. Jam light goes green, blue, bright green then green
    When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
    I've tried plugging my guitar in first, then starting garageband, no difference in results.
    I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
    Outside the garageband app, the ipad does recognize the Jam in settings, general.
    What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
    Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

    Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
    Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
    Message was edited by: Rickd3333
    Message was edited by: Rickd3333

  • PNG files don't work after iOS 7 update on iPad and iPhone

    I have several PNG files stored on my CC account but when I start a new photoshop touch project and try to add the PNG it downloads as a blank image. The dotted outline is there but the image is blank. It used to work before iOS 7 and now it does not. Can someone help. 
    This started happening after iOS 7 update and im having the same issue on iPhone and iPad. 

    You seem to have found the thread that is used for this:
    http://forums.adobe.com/message/5744088#5744088
    Closing this one for now.
    thanks,
    Ignacio

  • Autofill no longer works after recent Firefox update

    The Auto-fill function on google toolbar no longer works ever since I updated to newest Firefox

    See this for support information about the Google Toolbar.
    [http://www.google.com/support/toolbar/?hl=en]
    Or visit the Google Toolbar forum.
    [http://www.google.com/support/forum/p/Toolbar?hl=en]

  • My car dock is no longer working after iOS 4.3.2 update...help!!

    I have an after market car dock that normally plays music through my car speakers and charges my iphone. After the most recent iOS update it still charges but does not play music. Any ideas?

    Sometimes after iOS updates older tech or even off brand tech may not be supported. I use an older Griffin car charger with an iPhone & iPad and it won't charge because it is not supported. Maybe get a new dock or an Apple approved product, it kinda irritates me as well not being able to use off brand tech. Its cheaper than brand name products...
    Hope this helped

  • Location services not working after iOS 6 update (WiFi only)

    After updating my iPad (3 & WiFi only) to iOS 6 the location services no longer work. This stops some apps from working. It was fine before the update. Does anyone have a fix for this yet? I know others have been having the same problem.

    Before IOS 4 iPad and iPhone used Google and Skyhook databases for position info. In April Apple switched to using it's own in house database for location services. In the past one could register the MAC address and position of a router or access point with Skyhook and within 2 to 3 weeks any device with location services could find itself. Now with Apple handling it's own position database and no way to register an access point or router it is hit or miss as to whether an iPad or iPhone can find itself using WIFI only. If you live in a rural area you are less likely to have location services work. Hopefully Apple will emulate Skyhook in future by allowing users to register their access points or router's location in their data base. Until then those of us in rural areas are out of luck. Cheers

  • Camera and led light not working after IOS 7 update on iphone 5 help please!!

    After I installed the update my led light won't work for the flashlight and my camera doesn't work either. Only the front facing camera works. Any suggestions?

    thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works.  i did all the steps but no luck.
    So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net. 
    With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera,  they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money.  im glad they didnt charge me for the new camera though as it still didnt work.
    anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware.  i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release.  not overly impressed with the whole process.
    i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2.  anyway will update if i get any further progress.

  • My Mail will not work after ios 6 update on iPhone 4S

    My Mail will not load any emails after the iOS 6 update on my iPhone 4S. I have tried a hard reset, and deleting my email account from iPhone but neither works. My iPhone will delete the account but next time I go into settings, I see the account in there! I have no idea what to do, please help!

    My Mail will not load any emails after the iOS 6 update on my iPhone 4S. I have tried a hard reset, and deleting my email account from iPhone but neither works. My iPhone will delete the account but next time I go into settings, I see the account in there! I have no idea what to do, please help!

Maybe you are looking for

  • Macbook's ability to use tv disappear overnight

    I have been using a HDMI cabel from my macbook pro to my tv. It has been working for the last month, and suddenly it doesn't work. My computer turns blue but the tv screen does not. Any one know what is wrong? I have checked all the cables to tv etc.

  • TDS return excluding WCT line items

    Hi Experts, According to my understanding TDS return in sap are taken by selecting section codes in J1INQEFILE. By using a validation it is required in my system to fill business place\section code in vendor invoice hence section code is updated in T

  • Install V5 Eval copy w/out removing licensed V4 instance?

    Greetings. I want to take a look at Captivate 5. The eval media for version 5 I have will expire in six weeks, and as a solo user, I might not be replacing it right away with a licensed copy.  Therefore, I need to preserve version 4 on my computer. I

  • Sequence Presets

    I shot a music concert with three cameras and one recorded AVCHD in full HD (1920 X1080 50i) and the other two identical cameras recorded HDV (1440 x 1080 50i). I am planning to edit this using the multicamera function in CS5. Which is the best seque

  • HT4623 Cannot Pair iPhone 5 bluetooth to 06 BMW iDrive

    Hi, I am having a problem connecting my iPhone 5 to my 06 BMW iDrive. I have successfully connected my friends iPhone 4S to my iDrive, but when i try to connect my iPhone5 it fails after i have entered the passcode into the iDrive. I am using the exa