Contacts not moving from phonebook in my blackberry after removing from my contacts google contacts

contacts in my addressbook in my blackberry are not getting updated properly via automatic sync by gmail.
contacts are not getting deleted from phonebook when they are removed from "my contacts" in Google contacts, but new additions and deletions are getting synced.
when i tried to delete the contacts from my handheld after they have been moved from "my contacts", they got deleted all together. please help.
additional info : BB 9360, OS 7.1
when we pray God responds us by providing “Opportunities”

I've spent the better part of an afternooon trying to get my Outlook contacts transfered to my E5 phone. After several attempts I was able to get the OVI software to install (Windows Vista OS). I Now when I go th sync my Outlook contacts, the "sync now" button is greyed out. Any suggestions?

Similar Messages

Just after i merged and cleaned my contacts, one contact does not appear in my caller id and messages even the contact is in my phonebook. I already tried disabling my yahoo and google accounts connected to my iphone 4 ios 7.1. stiill no luck

just after i merged and cleaned my contacts, one contact does not appear in my caller id and messages even the contact is in my phonebook. I already tried disabling my yahoo and google accounts connected to my iphone 4 ios 7.1. stiill no luck

Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

Hi. I cannot trash photos from an album. Options are "remove from album" or "trash" but both only remove from album not the library

Hi. I cannot trash photos from an album. Options are "remove from album" or "trash" but both only remove from album not the library. The only way to trash photos is to go to the library/photos and trash from there which is a bit annoying!

If you click the arrow in the right lower corner of the photo in the album, you should see the Trash can. Is it not there?
Or use the key combination option-command-delete ⌥⌘⌫ .

Have CS5 on current PC, Win 7 64bit; how get *.exe to transfer to new computer after remove from old one

Have CS5 on current PC, Win 7 64bit; how get *.exe to transfer to new computer after remove from old one?

Baffled by multiple links; found one I think(?) I need. CS5 12.1.
It's basic, so I assume that one goes with CS5 Design Standard, but do not
know. Thanks for answer(s) again.
On Tue, Feb 17, 2015 at 10:36 AM, BobLevine <[email protected]>

How do I remove a song from my ipod that has been removed from itunes but still appears on my ipod

I have an ipod touch and my problem is how to remove songs from it when they have been removed from itunes. After synching the songs still appear on the ipod. How can I fix this?

Hi empty,
Have you deleted the song from the iPod itself? Go to the songs list and swipe left on the song title. A "Delete" option should come up allowing you to directly delete the item from your iPod....
Cheers,
GB

HT1725 I purchased a rental movie from iTunes.... But it got inturpted. Now it says it is processing, but has not moved all day. Eventually I deleted it from my video file in the hope of starting again. It still says its processing but has now disappeared

Hi can anybody help? I recently started to download a movie, but it was interrupted. Since then it has failed to download, but says it is processing. It has been doing this for a day or so.... But has still not completed. In desperation I deleted the title from my videos so that I could re download it, but unfortunately it says it is still downloading...... I can do nothing with it!, can anyone help?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Contacts not moved to new 4S

I backed up iPhone 3, I followed the directions & loaded the backup to mynew 4S. Everything made it but not my contacts. Note - this link does not specifically mention "contacts" http://support.apple.com/kb/ht2109 So how do I get them transferred? I've considered using the Google or MS synch, but the warning saying "Be sure back to up your contacts first", which I can't even verify I'm doing when I backup. Any help would be appreciated.

stevejobsfan0123 wrote:
And from the link you provided, I quote:
"you can still copy your contacts from a SIM card to your iPhone. "
OK
Read the next sentence in the link:
You can use your old phone's SIM card (if your old phone is not an iPhone) to transfer the primary phone number for each of your contacts from the SIM card."
Note the "Not an iphone " part.
That is correct and I said so in one of my posts. If you have anopther phone ( NOT IPHONE) that does store to SIM then you can import contacts from SIM.
As the iphone DOES NOT store to SIM this would be of NO HELP at all in transferring contacts from iphone to iphone.
There will be no contacts on the SIM form the iphone at all. Iphone does not store to Sim. There is nothing on the SIM of an iphone. No contacts. You could only import them if they were there in the first place, which on an iphone, they are not.

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

Delete mail from server after removed from IN BOX

I have a mail management issue I have not been able to fully solve.
I am balancing the same POP email accounts among the laptop using Mail (for home use) and my desktop using Eudora Pro (for work). Using Eudora, I can manually select to delete a message from the server. Eudora's manual deletions are flawless. Using Mail, the only option I can see that will help me do this is to select delete mail "When moved from In Box." If I hit the "delete" key, wouldn't that be the same as "moving if from the IN BOX?" When is the protocol actually carried out? On the next mail check? Immediately? Upon quitting and restarting Mail? I'm confused as to how this happens and why it does not seem to work all of the time.
Any and all assistance is most appreciated.
Much obliged,
Mick

Yes, deleting a message counts as moving it out of
the inbox. The commands to remove the message from
the server are sent the next time you check mail from
that server, but only if there are new messages to be
received from the server. Yes, many of us feel that
is a bug in Mail, that it should send the remove from
server commands the next time you check mail, whether
or not there are new messages to be downloaded.
Oh Gawd, I bet that's it. Yes, if that is the case, I would agree. It does not lead to efficient mail management if there needs to be a new message there. Do you know of any plans to change or alter that? Or has someone written an AppleScript of some kind to execute the command regardless?
It's a great command, otherwise. It's nice to be able to delete a message off of one computer and have it delete off of the server without any extra hassle.
Just wondering if there are any workarounds out there other than sending oneself a new message to get the delete from server command to activate.
cheers,
Mick

How do I fix project after "Remove From Version Control" corrupted it?

I am using RoboHelp 9.0.1 and installed both Tortoise SVN 1.6.9 and latest PushOK SVNSCC then added my large RoboHelp project to SVN. I was able to check in and out files from SVN but had several issues with it:
1) Super super slow. Working with folders or any renames would take 10 seconds per file and up to 1 hour if needed to refresh the root folder.
2) I could not perform some actions at all, such as delete, rename, or move folders. I kept getting COM errors.
I therefore decided that working with SVN and RoboHelp is not practical, at least not on my VPN so I decided to disconnect the project from source control and just work locally. The only option that I saw that sounded like it would do that was the "Remove from Version Control". This started a process that lasted for several hours. At the end of it, I now have several significant issues:
1) The order of the files and folders in my Project Manager is completely wrong now. I have almost 1000 topics and reordering all of them is not possible.
2) The Table of Contents, Glossary, and Index files appear empty. They had content before.
2) A couple of the Single Source Layouts I had created are completely missing.
3) Many, but not all, of the folders have tons of files with the extension ending in "_temp_removed_by_svn"
4) Many, but not all, of the files are actually gone from SVN so I can't recover a clean image. There was no warning that this command would actually delete the files from SVN (I thought it would just remove the version control connection).
5) Who know what other issue exist that I haven't seen.
Any idea how I can fix this?
Thanks in advance,
Dan

Are the "_temp_removed_by_svn" files in your local folder or SVN? Let us know how you get on with the new project. It sounds like something is wrong with SVN. Can you use the SVN Log command to see whether there is a different version you can restore. This might also give you an indication of what might have caused the problem. You could try deleting your CPD file. It gets rebuilt it is isn't there anyway. This file can become bloated and it is good practice to delete it when it gets close to 2mb in size. Your project is fairly large and has a lot of folders and may affect performance. Have you considered splitting them and merging the output? I know you probably don't want to consider this right now, but I think it may be a better long term solution.
The RoboColum(n)
@robocolumn
Colum McAndrew

How do I remove previous device from iCloud account? (It is removed from Find My iPhone and iCloud Backup)

I recently got a new iPhone and traded in my old one. At the store, the representatives erased the contents and settings of the old phone (though they did run into some difficulties because of a pre-installed profile and I think were successful after a few attempts) and removed the SIM card. However, the old device keeps showing up on my iCloud account. I removed it from Find My iPhone and deleted the stored backup for the phone, but it's still there. I've talked with Apple Support about it as well as called the store on what I should do. Apple cannot remove the device on my account for me (which is fair), but I think it's strange that I can't remove my own device either. It won't give me any option to.
The Apple people reassure me not to worry and that everything is probably "fine", but I don't like this uneasy feeling that my iCloud account (and who knows what other data) might have an open connection or hole somewhere that I'm not aware about.
Please help!

Some people I've talked to speculated (but could not confirm) that this "glitch" would be fixed once someone registered their own iCloud account to the old device; this would force the old device to be removed from my iCloud account and transferred to the new user. How long have you been experiencing this "glitch"? I'm guessing if Apple calls it a glitch on iCloud, it won't be fixed any time soon...

Security policy from old GPO still applying after removal

We have a Server 2k3 domain with a mix of 2k8R2 (PDC) and 2k3 DCs. We are currently in the process of
replacing older 2k3 DC policies with newer policies. Policy A (AKA "Old policy") has always been a problem as it contains settings which cause errors in the event logs of the DCs it is applied to (ID 1020 "Windows cannot create
registry key CurrentControlSet\Control\Session Manager. (The parameter is incorrect)" and 1096 "Windows cannot access the registry policy file, \\domain.com\sysvol\domain.com\Policies\{GUID}\Machine\registry.pol. (The parameter is incorrect)").
Policy B (AKA "New policy") has been wonderful in a completely different AD Forest/Domain that we created it in but is not happy after we copied it to this Domain.
The new policy was exported as a Backup and imported by creating a new GPO on this domain and choosing "Import settings". We've previously encountered both the "hidden file" and "read only" issues with copying GPOs so we avoided
those by ensuring hidden files were copied and removing "read only" from the policy folder. The new policy was then applied to the Domain Controller OU with a higher precedence than the old policy. Neither policy is set to enforced
and the links for both were enabled, both policies are set with GPO Status "Enabled" so the new policy should have overridden the older policy settings. After several gpupdate /force and reboots, the 2k3
domain controllers are showing in RSOP a Red x on "Computer policy" with "Group policy Infrastructure" as failed with details "Group Policy Infrastructure processed successfully but failed to log resultant set of policy information".
Under general with "Display all GPOs and filtering status" Old policy is lower than new policy.
When drilling down to "User Rights Assignment" you can see that "Old Policy" is still the winning policy for all settings. When under "Administrative Templates" "New policy" is the winning policy there. So it
seems that the new policy is applying for admin template settings but not for security policies.
I then disabled the old policy which reflected under the general tab filtering status "Disabled" but the user rights assignment still showed Old policy as winning. I tried modifying the Old policy and saw that the serial number for the policy updated
in the RSOP general tab. Then I completely removed the link for the policy from the DC OU and the policy disappeared from the general tab but still showed under User Rights Assignment.
I've tried clearing the Cached group policy from the machine with:
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose
and deleting [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft] from registry and c:\windows\system32\GroupPolicy from HD.
Usually I'll get an error from RSOP about RSOP already running until I gpupdate /force and then I'm back at square one.
I've confirmed that the issue is not replication, the machine shows no errors in FRS and I've performed non-authoritative SYSVOL restore on this server. repadmin
shows no errors.
I have not yet tried to demote/repromote the server as I'm unconvinced that will have any effect. I've seen this kind of issue on 2k3 servers where even after removing the server from the domain entirely the policies from the domain still remain in effect
to where you cannot even modify a setting from local gpedit.msc.
It seems that something is causing security policies to stick from the old policy but is allowing admin template policies to apply from the new policy. Where would these old settings be cached from, and how can I get them to go away?

I've now also tried putting the machine in an OU with inheritance blocking an no policies applied.
I've tried deleting [HKLM\Software\Microsoft\Windows\CurrentVersion\GroupPolicy\History] and reboot.
I've turned on all the logging (http://technet.microsoft.com/en-us/library/cc775423%28v=ws.10%29.aspx) and I can even see the .inf files created in c:\windows\security\templates\policy
for each GPO and the policy shows the correct settings.
NTRights (http://ss64.com/nt/ntrights.html,
http://support.microsoft.com/kb/315276) allows me to set the setting manually and AccessChk shows me the current settings
http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx but I still cannot get RSOP to come back clean. I can also see in c:\windows\security\logs that some of the security settings
I'm working show up; "remove SeDebugPrivilege." for example shows up as having been removed from the local administrator which was one of the changes I made.
I've opened up a ticket with Microsoft Support but they haven't had any fresh ideas either. My best guess at this point is that policy is actually applying but RSOP is busted. I have no idea how to reset the RSOP data however.
At this point I'm trying to run WMIDiag to see if there's an issue with WMI as several of the misc errors in the gpedit.log file come up with WMI related issues in google ("InitializeRSOP failed with 0x80070102", "GetObject for event source
of RSOP_ExtensionEventSource.id="{GUID}" failed with 0x80041002").
I should clarify that AccessChk seems to indicate that the User Rights Assignment settings ARE applying but are not showing correctly in RSOP.

How to Troubleshoot why data is not moving over into the Data Warehouse after Sql Server Agent Job Run

Hello,
Here is my problem:
Data was imported into the staging area. After resolving some errors and running the job, I got the data to move over to the next area. From there, data should be moving over into the DW. I have been troubleshooting for hours and cannot reslove this
issue. I have restarted the sql service services, I have ran a couple packages manually, and the job is running successfully.
What are some reasons why data is not getting into the data warehouse? Where should I be looking?
Your help is greatly appreciated!!

Anything is possible.
So, just to reiterate, running the job manually works, running the scheduled job does not result in errors neither data arriving to the DW, right? And it used to, correct?
If so, the 1st step would be to examine the configuration(s). But not before you inspect the package. Do you have an ability to export it to a file system and open in BIDS?
Arthur My Blog

Not booting from 10.4.8 volumes after upgrade from 10.4.7

I'm sorry to report that my aged G4 450 MHz AGP with 4 internal Hard disk drives no longer boots from any of the 2 volumes upgraded to Mac OS X 10.4.8 as soon as it was started from another volume!
All was working fine as long as 10.4.7 was installed on the 2 232 GB disks connected to the SIIG ATA133 controller. I could boot from any OS on any of the 4 disks, 5 partitions:
internal ATA66 bus:
18 GB disk, 2 partitions: 'IBM_18GB' with OS 9.2.2 and TechTool Pro's 'eDrive' with 10.4.7
71 GB disk, 1 partition 'IBM_71GB' with OS 9.2.2
PCI SIIG ATA133 controller:
232 GB disk, one partition 'I1232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
232 GB disk, one partition 'I2232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
Now I can only boot from the Mac OS 9.2.2 or the eDrive 10.4.7 partitions.
What I did so far: 'I2232GB' was my main OS X startup volume, 'I1232GB' contains a clone of it, plus additional folders like software base and backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8 through Software Update and repairing permissions all was OK as long as the Mac was just shut down or re-started: it always booted up in Mac OS X 10.4.8 from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same there.
Afterwards I could no longer boot in Mac OS X 10.4.8 from 'I2232GB' nor in in Mac OS X 10.4.8 from 'I1232GB': it just gets to the grey screen with the Apple logo, but the round circle underneath indicating some progress never appears. I left it there for hours: it just hangs.
With the Option key held at startup I could boot from the other partitions with Mac OS 9.2.2 or the eDrive with 10.4.7. None of their Startup Control Panels was able to get me back to 10.2.8!
So I booted from the TechTool Pro 4.5.1 DVD to Optimize both volumes, 'I1232GB' & 'I2232GB', always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to rebuild the directories of both volumes, 'I1232GB' & 'I2232GB'.
Still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Downloaded the Mac OS X 10.2.8 Compo Update (for PPC) and installed it onto both 'I1232GB' & 'I2232GB' while booted from the eDrive which I keep on Mac OS X 10.4.7 - no luck either, still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Then I backed up the users folder from 'I2232GB' onto 'I1232GB', booted from Mac OS 9.2.2 and used Intech's Hard Disk Speedtools 3.6 to format 'I2232GB', afterwards initialized it with Alsoft's Plus Maximizer Extension for a Block Size of 512 Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive '06 and upgraded everything to the latest releases with Software Update. All was working fine with all the required reboots until another startup volume was chosen: afterwards again I can no longer boot back into Mac OS X 10.2.8 on the fresch installed 'I2232GB'!
Any help would be appreciated.
Here is some information found by System Profiler from Mac OS X 10.4.7, eDrive, let me know if you need more:
Hardware Overview:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XA00715VHSF
Sales Order Number: M7628LL/A
ATA Bus:
IBM-DPTA-372050:
Capacity: 19.12 GB
Model: IBM-DPTA-372050
Volumes:
IBM_18GB:
Capacity: 13.12 GB
Available: 6.96 GB
eDrive:
Capacity: 6 GB
Available: 3.03 GB
IBM-DTLA-307075:
Capacity: 71.59 GB
Model: IBM-DTLA-307075
Volumes:
IBM_71GB:
Capacity: 71.59 GB
Available: 39.65 GB
ATA Bus:
PIONEER DVD-RW DVR-107D:
Model: PIONEER DVD-RW DVR-107D
Firmware Revision: 1.21
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
IOMEGA ZIP 100 ATAPI:
Model: IOMEGA ZIP 100 ATAPI
ACARD,6880M:
Name: ACARD,6880M
Type: scsi
Bus: PCI
Slot: SLOT-C
Vendor ID: 0x1191
Device ID: 0x0009
Subsystem Vendor ID: 0x1191
Subsystem ID: 0x0009
Revision ID: 0x0003
SCSI Parallel Domain 65536:
Initiator Identifier: 7
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk2
OS9 Drivers: Yes
SCSI Target Identifier: 0
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I1232GB:
Capacity: 232.89 GB
Available: 14.1 GB
Writable: Yes
File System: HFS+
BSD Name: disk2s3
Mount Point: /Volumes/I1232GB
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk3
OS9 Drivers: Yes
SCSI Target Identifier: 2
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I2232GB:
Capacity: 232.89 GB
Available: 180.11 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s3
Mount Point: /Volumes/I2232GB
The RAM consists of 4 identical modules and is about 1 year old:
DIMM0/J21 to DIMM3/J24:
Size: 512 MB
Type: SDRAM
Speed: PC133-333
Status: OK
Many thanks for your help!
Josef
Apple G4 AGP Mac OS X (10.4.8) 4 internal hard disks, dual layer DVD-RW, 2GB RAM

What I did so far: 'I2232GB' was my main OS X
startup volume, 'I1232GB' contains a clone of it,
plus additional folders like software base and
backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8
through Software Update and repairing permissions all
was OK as long as the Mac was just shut down or
re-started: it always booted up in Mac OS X 10.4.8
from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same
there.
Afterwards I could no longer boot in Mac OS X 10.4.8
from 'I2232GB' nor in in Mac OS X 10.4.8 from
'I1232GB': it just gets to the grey screen with the
Apple logo, but the round circle underneath
indicating some progress never appears. I left it
there for hours: it just hangs.
With the Option key held at startup I could boot from
the other partitions with Mac OS 9.2.2 or the eDrive
with 10.4.7. None of their Startup Control Panels was
able to get me back to 10.4.8!
So I booted from the TechTool Pro 4.5.1 DVD to
Optimize both volumes, 'I1232GB' & 'I2232GB',
always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to
rebuild the directories of both volumes, 'I1232GB'
& 'I2232GB'.
Still I can not boot from either 'I1232GB' or
'I2232GB' in Mac OS X 10.4.8!
Downloaded the Mac OS X 10.4.8 Compo Update (for PPC)
and installed it onto both 'I1232GB' & 'I2232GB'
while booted from the eDrive which I keep on Mac OS X
10.4.7 - no luck either, still I can not boot from
either 'I1232GB' or 'I2232GB' in Mac OS X
10.4.8!
Then I backed up the users folder from 'I2232GB'
onto 'I1232GB', booted from Mac OS 9.2.2 and used
Intech's Hard Disk Speedtools 3.6 to format
'I2232GB', afterwards initialized it with Alsoft's
Plus Maximizer Extension for a Block Size of 512
Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive
'06 and upgraded everything to the latest releases
with Software Update. All was working fine with all
the required reboots until another startup volume was
chosen: afterwards again I can no longer boot back
into Mac OS X 10.4.8 on the fresch installed
'I2232GB'!
I found several typos in above post, wherever it was 10.2.8 it should have read 10.4.8 - I'm very sorry for confusing you, this would not have made sense, but I found no way to edit the existing text therefore I modified the quote of it here.
I do not need Mac OS X 10.2.8 back, but it would be nice to boot back in Mac OS X 10.4.8 from another volume as the current one - which was working fine before with Mac OS X 10.4.7.
Many thanks,
Josef

IPhone 5s activation Apple ID request. Contacted the seller and she said that it was removed from her account, however I still get it and can't bypass it

I purchased an iPhone 5s and wanted to activate it as always but it asks for Apple ID. I contacted her and she provided me but it didn't work and she said that it's not linked to that account anymore.
She said that she replaced it. What can I do?
Is there a way to find out who is the real owner?

Sorry... No.
Try and get your Money back.

Contacts not moving from phonebook in my blackberry after removing from my contacts google contacts

Similar Messages

Maybe you are looking for