Contacts not visible on Fact sheet

Hi
One of the contact person from the BP is missing in the Factsheet in CIC0. There are around 40 Contact person for a BP all of them are seen in the initial displaye list in CIC0, however in Factsheet one of the contact person is missing.
Is anyone aware of such situation and the reson behind it- please advise. Thank you.
Best regards
Sanyogita

Hi
Kindly check for the relationship for that BP. It may happen that the relationship category " has contact person" may not be maintained between the BP  & Contact person
Regards
Hrishikesh

Similar Messages

  • E51 - contacts not visible

    Hi there
    I have an E51 and am not sure what has happened but one minute all my contacts were visible and now they are not. If a person whose details I have stored in my phone memory calls me I can see their details however I cannot retrieve contact information from the phone. Help! I have installed the latest firmware, removed the battery and SIM etc etc but no luck
    thanks

    have you tried copying your sim contacts to contacts on phone memory? sometimes it happens. try it and see if it works
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Whatsapp contacts not visible after undating to BB 10.3.1.156​5

    Hi
    Contacts are not visible in the whatsapp screen after updating my blackBerry Z3 to OS 10.3. Instead only the number are visible. Anybody having any solution or facing similar problem, please let me know.
    Regards

    1)
    what is your current whatsapp version? And where did you download it?
    2)
    since your message, I think that your mobile phone operator has pushed a new OS version. Have you installed it already?
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Contacts not visible after moving contacts from SI...

    I have express music 5310. i had moved my contacts from sim to phone memory. After which these contacts are not visible. These are not available on the sim anymore. They are not visible on contact lists too..
    Any help on retrieving these would be very helpful

    In contacts settings set the phone contacts to phone contacts only is it now set to both?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Skype Contact not visible in "Recent"

    The contact is visible in my "contacts" list but does not show up in "recents." I think I misclicked something as a skype notification came up quickly but I couldn't read it. Any way to fix it? A key to press?
    Solved!
    Go to Solution.

    Make sure that the View option in the Recent tab is not set to "Unread".

  • 8330 - Contacts Not Visible In Address Book

    Good afternoonn all!
    I'm having a problem with my Address Book - my contacts are "there" (in the Address Book options it shows 129), but their not visible when I open my address book.  If I dial out or send a message, or receive a call or e-mail, the contact's information shows up (i.e. dialing 555-555-1234 shows up as John Smith), but is not readily availble in the address book.  I've switched between Business and Personal contacts, but none are in either group.
    As far as I know, there was nothing that I did "out of the ordinary" before this issue crept up.
    Many thanks for your help.
    All the best,
    Jason
    Solved!
    Go to Solution.

    I am having a problem with my 8310 that sounds the same as yours -- I have it synched to my outlook with enterprise server, and I now cannot add any new names without it clearing half the alphabet. It started a few months ago when I'd try to add a colleague and check off MM which is my category for work people. If I wrote the company name (which starts with M) in the persons field, then when I saved the contact, and viewed all the contacts in a list alphabetical, and hit "m" to see all the M's, it would only show that last person I put in - and no other names. I'd hit N, P, J, etc, and it would say "no entries found" even though there are 575 entries in my phone. I tried eliminating fields and discovered that If their name started with M, it would be a problem... sometimes it was the company name, so I'd leave that blank and it would solve the problem. HOWEVER, now it's at the point where I can't even add someone's name - no phone, no email, no company, no category - just their name - and they are listed before the A's in my contact list - and make it so half the alphabel brings up no contacts. This happens no matter if it was done on my computer screen or in the blackberry itself. I am extremely frustrated and have resorted to deleting all new contacts once I've added them because they cause this problem. I consider myself fairly computer/bb literate, and have been clearing all filters and categories. Nothing seems to solve it - and this happened in my older 8310 too (that one got exchanged due to an email problem). HELP

  • Contacts not visible in PC Suite 6.8

    I have a Nokia 6680. My problem is that when I click on to the contacts icon none of my contacts are visible. Can any one help?
    Thanks,
    Allan

    AFter clicnkg the contacts icon and then making sure (use folders view in Windows Explorer so that you see the folder tree on the left side in your screen), go and highlight the conects folder, then locate the phone and arrow icon in the upper part of the screen, press it, sync should start

  • Synchronised contacts not visible in Phone Browser

    Started Nokia 6300 + PCSuite 6.84. After synchronization with Outlook 2003 I got all the contacts from PC to 6300 succsefully. But I do not see them in Phone Browser, so there is no possibility to adjust them directly. The only contacts I can see are the ones entered manually in the phone itself. Is there any solution to that?

    No. I tried refresh, disconnect/reconnect and restart of both PC and phone. Nothing seems to have any impact on the visible contacts.Message Edited by slavek on 15-Aug-200709:39 AM

  • Contacts not visible in the groups

    I you make a group on the mac mini , the contacts in the group are showed.
    1. After synchronising the Iphone  shows the groups  but is not able to show the contacts or you have to eliminate all other groups?????
    2. Not all the contacts from the mac mini are showed in the Iphone after Icloud????

    Has anyone ever found an answer to this? It's driving me nuts. I have a group called "Chairs" now and had an old distribution list with the same name, but different members. Mac mail will only populate with the old list.

  • Contacts not visible in SMS inbox

    Yesterday i did a reset on my nokia N97 to set it back to the factory settings. I copied my contacts to the phone memory, but now when I get a text message I only see the phone number instead of the name attached to it. The names are in the Contacts, and when i reply on the number from my inbox, the correct name instead of the phone number is displayed in my outbox. Also when the same person calls me you see the correct name.
    Can someone help me or is it just a adjustment I have to make?

    Hi Friend,
    Did you make groups of contacts? If yes, the bottom "Group" will appear in Contacts app, so tap and select all the groups to see the full contact list.
    Hope it will be helpful

  • Contacts not visible?

    When I set up our exchange account on each employee phone (android) none of the contacts show up unless one of two things happen.
    1. You manually search the name (then it pops up)
    2. I go to each individual computer and copy the global address book to the contacts in outlook.
    Why don't the exchange contacts show up on the phone unless I do one of the two things above? I have that account choose as the contacts to display, but it shows none unless you manually copy or search the name. What is the point of having a synced exchange
    account if you cannot easily access the contacts?!!

    Which contacts are you asking about?
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • HT204387 Phonebook contacts not visible via bluetooth after updating to 8.1.2

    Folks,
    After I updated to 8.1.2 on my iphone 6, I can no longer see the address book from while paired with my car.  The car is a 2012 Mercedes and it was working flawlessly before 8.1.1 and before.  I tried resetting the network settings in iPhone and deleted all the paired devices (iPhone and the Mercedes) without any improvement.  Any suggestions?
    Thanks in advance.
    -Dennis

    Folks,
    After I updated to 8.1.2 on my iphone 6, I can no longer see the address book from while paired with my car.  The car is a 2012 Mercedes and it was working flawlessly before 8.1.1 and before.  I tried resetting the network settings in iPhone and deleted all the paired devices (iPhone and the Mercedes) without any improvement.  Any suggestions?
    Thanks in advance.
    -Dennis

  • Fact Sheet - Wrong Sold to visible

    Hi All,
    I have an issue for a particular user. Problem is wrong sold to party is visible in fact sheet.
    Just to brief the issue.. "A" is the sold to party for "B" (B is ship to). when a user opens B's fact sheet... the fact sheet displayong "C" as the sold to for B. Actually A is the sold to.
    The issue is occuring for only one user. If some other user accesses B's fact sheet.. then fact sheet shows correct details as A is the sold to for B. So the issue is only fro one user. Hope i have explained the issue clearly !.
    I have checked the relationship in CRM, R/3 and BW aswell. in all systems relationship exists between A and B. There is no relationship between C & (A or B).
    Authorization view :When compared the problematic user with the user who can see correct details, the roles and authorization is same for both users.
    could someone please shed some light on this issue.
    Thanks and Regards,
    Vijay.

    Jacob,
    check note 1040229.
    you have to maintain cluster view CRMV_BUIL_PRT (tx sm34)
    there you have to link your newly created business role (its PFCG role) to the form view CRM_ACCOUNT_OVERVIEW_PRN
    and to class/interface CL_UIU_PRN_ACCOUNT.
    should work this way
    regards,
    Ineke

  • CRM2007, Fact Sheet, Long Texts (STXH/STXL)

    Hi Folks
    We are in the middle of an upgrade from CRM 3.1 to CRM2007. And then I am looking at the new Fact Sheets. In our old CRM 3.1 system we have a lot of self developped Info Blocks (Assignment Blocks in CRM2007). And in the new CRM2007 the users want the same data displayed in the Fact Sheet.
    When i'm looking at the existing Assignment blocks in the new Fact Sheet it seems to me that all the views are of type Table. What if I want to make some different views, each containing one Note (Long Text) entry? Is it possible?
    What is the best to do? In the old CRM 3.1 system I copied the Class CL_CRM_CCKPT_IO_OPENLEADS to a Z-class. And then this class was my skeleton for the rest of the Info Blocks we have developped.
    One of our needs is that we have to make a Viewset with example 4 viewareas, 2 rows and 2 columns.
    Each viewarea should then containe one view. And in each of these views we want to display one longtext (Note)
    In our old CRm 3.1 world we read the specific Longtext (from STXH/STXL) with the functionmodule READ_TEXT. The ID could be Z23A, Z23B....Z23H and the Name = Customer Number.
      call function 'READ_TEXT'
        exporting
    *   CLIENT                        = SY-MANDT
          id                            = zzid
          language                      = sy-langu
          name                          = w_name
          object                        = 'BUT000'
    Is it possible to have one view displayed in the four viewareas, and then in a kind of way just change the ID to display four different texts??
    Best regards
    An Mery Xmas
    Carsten

    Hi Folks
    I have now been able to display Notes in the Fact Sheet
    Best regards
    Carsten

  • Fact sheet not visible in new Z business role

    Hi all,
    On creating a new Z marketing professional role after copying from the standard role, I am not able to find the option of viewing the Account Fact Sheet under the link "More" in the customer master. i didnt find any customizing wherein I could assign the fact sheet to the business role.
    I've assigned the fact sheet to transaction types under Settings for activities but didnt work out. Any further settings ??
    Deserving points to be rewarded, Regards,
    Jacob.

    Jacob,
    check note 1040229.
    you have to maintain cluster view CRMV_BUIL_PRT (tx sm34)
    there you have to link your newly created business role (its PFCG role) to the form view CRM_ACCOUNT_OVERVIEW_PRN
    and to class/interface CL_UIU_PRN_ACCOUNT.
    should work this way
    regards,
    Ineke

Maybe you are looking for

  • OpenSQLException - Cannot assign double value

    Hello,   I have some table in database with field of type 'double'. I use JDBC to store data in this table and sometimes I would like to place special values in it, eg: preparedStatement.setDouble(1, Double.MIN_VALUE); Unfortunately I get exception l

  • Qt or wxWidgets? Urgent help needed in deciding

    I am porting illustrator plugin to cs6, and planning to use wxWidgets or Qt for UI. I was leaning more towards wxWidgets because of moc in Qt. But I realized that crutial thing for the decision is to be able to embed the UI in illustrator panel. Plea

  • Catch Mapping Errors on the Exception Hander in a BPM

    Hi All I am struggling to catch maping error in the Exception Handler, so my question is that, is it possible the catch mapping errors in the Exception Handler using BMP Thanks Yonela

  • Arraycollection to database

    I have an arraycollection that is populated from a webservice. Users can edit all fields and possible every row in teh database will need to be modified. I'm trying to find the best way to get this data back to coldfusion to modify several database r

  • Can't add JMS topics using weblogic.Admin

    I have seen a similar problem being mentioned before on this board, except it occurred more directly through management APIs. I'm working with Weblogic 6.1, and trying to create a JMSTopic from command-line using weblogic.Admin First I create a JMSSe