Contacts producing multiple entries as does calendar . How to stop and fix please.

Contacts producing multiple entries as does Calender. How to stop and fix pls?

ok easiest way it to restore to factory setting and start from there. When you go to do your first sync you don’t “sync contacts or calendar”. When you add mobile me onto your Ipad select all the services that you want to enable and then mobile me will keep everything in sync.
If you need futher steps let me know

Similar Messages

Multiple entries in my calendar

Hello:
I have some how gotten multiple entries into my calendar. Thanksgiving day has 6 entries, Mother's day about 5 - that kind of thing. I did NOT import these dates multiple times. Events I have created, either recurring or single, have also some how duplicated themselves.
I do not share a calendar with any one, it's just my stuff. The calendar is so messed up, what I'd like to do is some how select everything going forward and delete it all and start again. Deleting everything one at a time will drive me postal.
Thanks!

Hi,
I wrote an application called iCal Dupe Deleter to fix this sort of problem. See www.nhoj.co.uk/icaldupedeleter
The application is free to use, but I ask for donations if you find it useful.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

When I try to turn my iPhone off, it automatically restarts itself. It has never done this before; does anyone know why it might be doing this/how to stop it happening?

When I try to turn my iPhone off, it automatically restarts itself. It has never done this before; does anyone know why it might be doing this/how to stop it happening?

This had happened to me today as well. I gave constantly tried resetting it, (I don't particularly want to restore it), but earlier did you find that your headphones went funny? Mine would stop playing music, but the phone would keep going. And if I paused it, and then pressed play, No sound would come out. And if I took the headphones out while it was paused it would play on the device, but as before, not through the headphones. But, I fixed it (temporarily) by pulling the headphones out while it was playing, and plugged them back it. But normally this would pause the music, and it didn't, just continued on the phone, with no sound coming out of the speakers. And it would only last for a couple of minutes and happen again. Then I tried resetting the phone, and it wouldn't turn off. Them I fixed the turn off problem by placing on a dock, and I think this also fixed the headphone problem. But then I took it off and then on the dock, and now it won't play through the dock (but it charges) and it won't turn off, again!
Also, apples customer serivice is plainly crap. This should be easy to fix. And I shouldnt have to pay a fee to ring them up for service help.

How to stop and start process SAPOSCOL

Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
Collector           : running
Start time coll.    : Mon May 21 17:49:49 2007
Current Time        : Mon Jun 11 13:27:51 2007
Last write access   : Tue May 29 06:23:46 2007
Last Read Access   : Mon Jun 11 13:26:24 2007
When i try to stop the saposcol i get the following error:
igzadm> saposcol -k
Setting Stop Flag :
13:24:44 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
13:24:44 11.06.2007   LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
      Please kill collecting process.exes.
Am doing this command through SID<ADM> from change directory /run.
Please help me how to check the permission of the SIDADM to stop the services.
I also try the same from root user but now use..
Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
Advance Thanks.
Suri Tyson

Hi, i have the following permission for saposcol
imserv:/ # ps -ef | grep saposcol | more
    root 118842 528422   0 14:02:17 pts/2 0:00 grep saposcol
I have changed the ownership as you mentioned....
imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
Preparing saposcol ...
Preparing icmbnd ...
done
However, i still get the error as:
igzadm> saposcol -k
Setting Stop Flag :
14:12:13 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
14:12:13 11.06.2007   LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
      Please kill collecting process.
Now the permission are set in my system as:
igzadm> ps -ef |grep saposcol|more
igzadm 729196 983058   0 14:13:25 pts/2 0:00 grep saposcol

How to Stop and Start Scheduler Service

Does anyone know how to stop and start the Scheduler service for Hyperion Financial Reporting in release 9.3.1?

please see the metalink note
How to Start/Stop MWA Services Using Control Scripts adstrtal.sh/adstpall.sh? [ID 731320.1]
This is how i startup and shutdown WMA
for stopping :
1) login to Applications tier
2) To see if the MWA (telnet) server is running use:
ps -ef|grep DPID
3) cd $MWA_TOP/bin
3) ./mwactl.sh -login sysadmin/xxxxx stop_force 10200;
4) check the wma process from OS level
ps -ef|grep mwa
for starting
1) login to Applications tier
2) cd $MWA_TOP/bin
3) ./mwactl.sh -login sysadmin/xxxxx start _force 10200;
4) check the wma process from OS level
ps -ef|grep mwa

How to stop and Start ASM in 11gR2

Hi,
Any one please let me know the complete process of how to stop and start the ASM instance in
11.2.0.1 oracle.
Thanks.
Ali

Hi;
If you need to close ASM than you need to also close database
You need to close db:
srvctl stop database -d instance_name
or
set ORACLE_HOME and ORACLE_SID
sqlplus "/as sysdba"
shutdown immediate;
srvctl stop LISTENER
srvctl stop ASM -f
or see:
Stop asm instance in standalone database
Re: Stop asm instance in standalone database
Regard
Helios

How to STOP and START the BO EXPLORER/POLESTAR - LINUX

Dear friends,
Could you please let me know on How to STOP and START the BO EXPLORER/POLESTAR on LINUX platform?
Thank you,
Nikee

Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
When an Apex session starts it starts calling the API.
You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
Regards,

How to stop and start RAC Database

Hi,
Can anybody tell me How to stop and start RAC Database.
Pls give me the exact procedure for OS - IBM Aix 5.3.
Rajkumar

Burleson,
It so appears, as from the numerous times you have been published incorrect, untested information, and non-working scripts, you are not an Oracle guru,
but only a self-proclaimed one.
It also appears nothing on your 'CV' can be easily verified.
You state you are an 'adjunct professor emeritus', however anyone who was kicked out after a few months can call himself a 'professor emeritus'.
Looking at the enormous amount insults and slander you have posted directed to me and others on this forum, showing a highly unprofessional attitude toward your peers,violating this forums rules of conduct, don't you think you deserved to be banned completely?
After all, you are always promoting your own publications here, which is also in violation of the rules for this forum.
What makes you think that "Sybrand" is a man's name? How many male Sybrand's do you know? I don't know any, not one.
That's your problem. I'm as much as male, as you are a fat, ugly, self-proclaimed Oracle-guru, which you are clearly not, you are only a fraud, and this glares from all of your publications.,
Sybrand Bakker
Senior Oracle DBA

How to stop and start IGS(internet graphic server)

Hi Techies
How to stop and start IGS(internet graphic server) in Solaries
IGS is 7.0 1patch
Is this the command to stop and start IGS
stopigs and startigs
If this correct will there be any issues if i stop the IGS from the above command
Thank You
Haroon

Hoi Haroon
On base 6.40 there were stopigs/startigs scripts, yes. When we upgraded our systems to 7.0 I encountered the same problem, the igs could be stopped, but not started anymore (externally). Can you check, if the startigs/stopigs-scripts are 7.0 or 6.40.
I then opened an oss and got as answer:
"To start and to stop the igs there's only the offical way by stopping and starting the sap system".
However I found a solution to start and stop:
start:
nohup /sapmnt/<SID>/exe/igswd_mt -mode=profile pf=/usr/sap/<SID>/SYS/profile/<Instaneprofile> &
e.g.:
nohup /sapmnt/P72/exe/igswd_mt -mode=profile pf=/usr/sap/P72/SYS/profile/P72_DVEBMGS01_migzmc10 &
stop:
--> stopigs, therefore the 6.40-stopigs script has to remain in the exe directory.
Hope this helps.
Regards Patrick

How to stop and start WMA in 11i system

how to stop and start MWA in 11i system, its Linux server.

please see the metalink note
How to Start/Stop MWA Services Using Control Scripts adstrtal.sh/adstpall.sh? [ID 731320.1]
This is how i startup and shutdown WMA
for stopping :
1) login to Applications tier
2) To see if the MWA (telnet) server is running use:
ps -ef|grep DPID
3) cd $MWA_TOP/bin
3) ./mwactl.sh -login sysadmin/xxxxx stop_force 10200;
4) check the wma process from OS level
ps -ef|grep mwa
for starting
1) login to Applications tier
2) cd $MWA_TOP/bin
3) ./mwactl.sh -login sysadmin/xxxxx start _force 10200;
4) check the wma process from OS level
ps -ef|grep mwa

How to Stop and restart the midtier?

Hello All,
I have installed Oracle AS (Infraturcture & middle tier , BI & Forms) on same Linux box.i.e: Oracle As 10.1.2.0.2 (Rel 2, x86 for Linux), SLES 9
Here is my question:
How to Stop and restart the midtier?
Regards,
DN

biforms.sh
export ORACLE_HOME=/opt/oracle/biforms
export OH=$ORACLE_HOME
export PATH=$OH/bin:$OH/opmn/bin:/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/java/bin
export ORACLE_SID=ORCL
export LD_LIBRARY_PATH=$OH/lib:/usr/openwin/lib:/usr/dt/lib:/usr/lib:/tools/lib
infra.sh
export ORACLE_HOME=/opt/oracle/infra <-- or correct one!
export OH=$ORACLE_HOME
export PATH=$OH/bin:$OH/opmn/bin:/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/java/bin
export ORACLE_SID=ORCL
export LD_LIBRARY_PATH=$OH/lib:/usr/openwin/lib:/usr/dt/lib:/usr/lib:/tools/libAs you see, only the first row differs from these two scrips. Because I'm lazy, I usualy set export OH. Under certain circumstances you might want to add DISPLAY to biforms.sh. Set it to localhost:0 or whatever is correct.
Martin

How to Stop and restart the OC4J_BI_FORMS?

I have Oracle AS 10.1.2.0.2 (Rel 2) installed. (Infratsructure & BI & Forms) on same computer.
my question is :
How to Stop and restart the OC4J_BI_FORMS?
Regards,
DN

Just as any other OC4J:
opmnctl stopproc -process-type=OC4J_BI_FORMS
opmnctl startproc -process-type=OC4J_BI_FORMS
or
opmnctl restartproc -process-type=OC4J_BI_FORMS
cu
Andreas

How to stop and remove an active job.

How to stop and remove an active job.

What sort of "job" are you referring to? A print job? If so, open the queue for the printer - it should be in your Dock, or you can access it through the Printers & Scanners system preference - and click the green Pause button to stop the entire queue, or the Pause button next to a specific print job to pause just that job. To clear a job, click the "X" button to the right of the job.
If that's not the "job" you mean, please post back and clarify.
Regards.

3.1.3.709: How to Verify and Fix a Possibly Corrupted Design?

How to verify and fix, if necessary, a design that is likely to be corrupted? I first suspected I corrupted file when an attempt to reverse-engineer changes from the relation model to the logical did not work. After some investigation I found datamodeler.log file to which the following error was emitted whenever the reverse-engineer button was clicked: 2013-01-28 11:39:32,001 [AWT-EventQueue-0] ERROR MDBAction - java.lang.NullPointerException. This error message is reproducible. There are also additional warnings in the log whenever this particular design is opened such as [Thread-133] ERROR XMLTransformationManager - Unable to load object from XML: ..../model/dw/rel/A864FBB0-411F4EF06C86/table/seg_0/C4046530-1A69-AD31-6127-390C93D8F7F7.xml java.io.FileNotFoundException. The design has been moved from one Data Modeler version to another over the years. It is currently version controlled by SVN but, alas, I have not been able locate a fully functional copy from the repository. (People usually only use forward engineering from the logical model which appears to work fine most of the time.)
I have investigated the design and located a single table object in the relational model that appears corrupted. It cannot be removed from the design with the DataModeler UI (nothing happend when I click on delete on the object menu). I then checked out a testing copy of the design and manually removed all the files with the object identifier in the file name. Additionally, I searched for xml blocks with a reference to the object identifier and deleted the corresponding blocks from those file. After that the reverse-engineering button began to function again. However, I am afraid of commiting a manually edited design to the repository as I am not certain that I have not broken something else.
What is the recommended way to verify a design and fixing problems in it? Starting a new design from scratch is not an option since there is plenty of documentation within the design that cannot be easily obtained elsewhere. I could recreate the broken objects from the data dictionary if I first had a safe way to identify and delete them from the design.
Best regards,
Miikka

Hi Mikka,
thanks for the info provided.
You can use following script to see wrong foreign keys - in form table_name.fk_name:
log_rep = new Packages.oracle.dbtools.crest.swingui.LogReport(model.getAppView());
log_rep.setName("wrong FKs");
text = "";
fks = model.getFKIndexAssociationSet().toArray();
for(var i=0;i<fks.length;i++){
     fk = fks;
     if(fk.getRemoteIndex() == null){
          text = text + "\n" + fk.getLongName();
log_rep.setLog(text);
log_rep.showModalDialog(new java.awt.Dimension(750, 550));
and following script to remove themfks = model.getFKIndexAssociationSet().toArray();
for(var i=0;i<fks.length;i++){
     fk = fks[i];
     if(fk.getRemoteIndex() == null){
          fk.remove();
Now you can remove the table if you want to. Save design at the end.
Regards,
Philip

How to customize and fix permanently the size of web pages (zoom%) in Firefox as in Internet Explorer either: View - Zoom - Custom (percentage).

How to customize and fix permanently the size of web pages (zoom%) in Firefox as in Internet Explorer either:
View - Zoom - Custom (percentage).
Thank you

This may help you.
https://support.mozilla.com/en-US/questions/894000

Contacts producing multiple entries as does calendar . How to stop and fix please.

Similar Messages

Maybe you are looking for