Contacts search

The problem with this is that whenever I perform a software update i.e. upgradation of iOS, all my contacts get lost. Can you please tell me where are the contacts synch/stored  in the iTunes?

In order to sync your contacts to iCloud, you simply set that up on your phone under Settings...iCloud. Make sure Contacts is switched to On.
You can check your contacts are synching by logging into www.icloud.com and clicking the Contacts button.
If you prefer to sync to Outlook, you'll need to download iCloud Control Panel for Windows and set that option there.
I'd recommend iCloud

Similar Messages

  • Passing result list from Contact search to Target group

    Hi,
    I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow.
    Note: Here the contact structure is different in each component.
    Thanks.

    Yes Srikanth, you need to bind context of result list to SEGED_TG using component controller binding. Let me know if you have questions.
    But the question is did you make a navigation from the contact search result to target group creation or is it a standard functionality ?
    As per my knowledge we can navigate from Profile set creation creation screen or from Trade Promotions.

  • The chat contacts search functionality is missing

    I have configured the chat in thunderbird. It looks well and better but when I searched for a specific contact in my list of contacts(more than 300) by name or Username, I am unable to search the contact and I found it manually.
    If there is any addon/extension for chat contact search, Please let me know.
    Thanks,
    Jayanti

    I can see nothing.
    Look here https://addons.mozilla.org/en-US/thunderbird/
    Perhaps instant bird is a better fit to your needs. http://instantbird.com/

  • 808 Pureview contact search not working

    Hi, i am unable to get contact search to work even after enabling it on the call screen. adaptive search under settings has also been turned on. can someone help?

    Try the soft reset and if that does not help, do a hard reset. But remember to back up your device with Nokia suite.
    Hard Reset: 
    Once backed up, enter *#7370# and when prompted, enter 12345 as the default passcode.
    Hope this helps.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Contact search process

    Hello All,
    I am trying to understand the process of contact search.
    Is it correct that the normal behavior would be:
    - search in Lync adress book (by default in local GalContacts.db)
    - search in Exchange GAL (via EWS)
    - search for personal contacts on Exchange (via EWS)
    and then do a merge of these?
    And should the filters applied via ABSconfig also apply to contacts found via Exchange GAL (in my situation that doesn't seem to be the case...)?
    I am also seeing a different behavior on Lync 2013 (15.0.4711.1002) and Lync for Mac (14.0.11). Is it possible that Lync for Mac doesn't look in Exchange GAL when doing a search?
    Thanks in advance for the reponses, I am quite confused regarding this whole search process and cannot find much information about it.
    Gael

    I stand corrected. I just read this technet article, https://technet.microsoft.com/en-us/library/gg429711%28v=ocs.15%29.aspx?f=255&MSPPError=-2147217396
    It seems Lync 2013 gives you results for users that are not SIP enabled as well. It can be changed though. Check the above article on how to limit your search to only SIP enabled users.
    "While having full contact records in the Address Book files enables you to use Lync Server to initiate email, telephone,
    or Enterprise Voice calls (that is, if Enterprise Voice is enabled on the server) with users that are not configured for Session Initiation Protocol (SIP), some organizations prefer to include only SIP-enabled users in their Address Book Server entries."
    My Blog : http://www.theskypeguy.com
    Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you have asked, please mark the thread as answered to aid others when they are looking for solutions to similar problems or queries.
    The opinions expressed here are solely my own and do not express the views or opinions of my employer.

  • Where is the Contacts Search feature?

    I have over 4,000 contacts in my list. I need to be able to search for contacts based on information in other fields besides first and last name. Where can I find the Contacts Search/Spotlight input field or equivalent?

    ** BUMP **
    I notice that all the reviews are highlighting how easy it is to SCROLL (browse) the contacts list in the Phone Book, I have yet to figure out how to SEARCH the contacts list. It seems like you can do this when you're entering a Text Message recipient (or, for that matter, addressing an email message), so clearly the ability to perform a "lookup" action is there, but either it's not implemented in the Phone application, or I'm just blind.
    So, to illustrate: Right now, I've sorted my Phone contacts by last name. Suppose I want to call "Michael" but I don't know his last name. In Mac OS X (along with the really good smartphones), I would typically be able to enter his first name and have all the Micahels in my contacts list show up. Not only that, I'd also get search results for anyone who worked for a company called "Michael", or even someone who had "Michael" in their notes field (perhaps I'm looking for "Michael's Secretary"?)
    I hope Apple is paying attention, because something as simple as a contact search REALLY ought to be part of their inevitable 1.1 release!!

  • Anyone tried to get Jabber to work with Domino for contact search

                       I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

                       I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

  • How would i add Account Emp res id field in contact search

    Hi Gurus,
    Can any one tell me the procedure to add Account Employee sales responsible field(BP_HEAD_SEARCH>SEARCH(VIEW)>SEARCH(CN)>OWNER)  in Contact search (BP_CONT_SEARCH)?
    Is it possible to add account related fields in contact search?
    Thanks

    Hi Nisha,
    I appreicaite your reply. I did the same way and i also did explict logic to get the accounts depedning on the user selection for custom field in EH_onsearch ( ). but when there is a huge data, my logic gives time out error on web ui.so that is why i want to add the stadard way.
    Account Emp res field is already it is part of account search.so if i add Attribute from Builheaderadvancedsearch BOL entity to the contact search BOL entity through wizard  , will that works?
    Thanks
    Seema

  • I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing.

    I have recently upgraded to ios 7 on my iphone. I am currently at 7.0.2 which i installed yesterday. Now i notice that the keypad doesnt appear in any function under Phone. Keypad doesnt show up in contact search, or while adding new contacts or editing the existing. This is irritting.

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • E52 Contacts search - Building cache

    I've recently upgraded my E52 to the latest firmware 031.012 and now the Contacts search function no longer works, every time I press a key to search the address book I get the message "Building cache. Search will be available in a moment", which it never is!
    Any ideas how to resolve this?

    Can't see contacts on phone memory,but when somebody from contact list call me,his name shows on the screen.. Contact search don't work.When i look Phone memory it shows contacts memory 245kb,but where are they???? How can i save them from loosing..Synchronizing them with PC don't work too..Before few days i just synchronize emails with phone,maybe that is a bug in Nokia E52???
    i save new contact in phone memory, it seams ok, but when I try to find them there's nothing..
    Phone popup:
    Building cache. search will be able in moment,
    and then i just can see contacts from sim card..Nothing from phone memory..
    I just updated softver,and i have same problem.. "Building cache" and then no contacs.... i also did a reset of phone..nothing help..
    Thank You for Your fast answering..
    sincerely,

  • Contacts search function

    Any idea when contact search will be available? It would be great if one could search contacts as easy as in Address Book.

    Good Idea! But Apple may never hear of it unless you submit it!
    http://www.apple.com/feedback/iphone.html
    P.S. Remember, Apple dosen't look at these forums, so make sure to submit ideas to the above link!!
    Message was edited by: MakaveliArts

  • N6700 slide / Contact search in Contacts and Adres...

    Hallo!
    I bought Nokia 6700 slide last week. After the first setup of the exchange mail the contact search worked perfectly: when I started (in Menu/Contacts) to write a name and it was not found in contacts of my phone, nokia immediately offered the possibility to search on exchange server and in same screen returned the found contact (if any).
    Now, after yesterday´s nokia sw actualization (current version 061.004, 20-Oct-2010; User version 061.004.327.02, 14-Dec-2010) this possibility completely disappeared!
    When I now start to write a name and it is not found in contacts of the phone, nokia returns "(žádné shody)" (I have czech language version; in English it means something like "no records found") ...and that´s all. I must then go to Menu\Application\Email\Adresář (Adresář="Adress book") and write the wanted contact in the "Search in Mail for Exchange" field. Contact is then found (if any), so I think that my Exchange mail is configured correctly. Is there any possibility how to get the search function back as it worked before SW actualization (search in Contacts and Adress book in one step)? Thanks for any advice. Vera

    Ah yes, reboot had been tried but to no avail.
    Before doing a soft reset I take screen grabs of my homescreens which will make things easy to get back to how I want them.
    Doing #7780 soft reset now...
    ...done.
    Ah! Messaging threads now show my contacts and their thumbnails  
    Brill!  Contact Search in dialler is also fixed.
    @no1_slumko Thanks!! Have *stared* you.

  • Dialing and contact search lacking up

    About 3 weeks ago my 3gs started to lock up during dialing or contact searches. It wouldn't respond to pad touches, then would suddenly unlock and enter every key I had touched. Contact searches were useless. I've done complete restores. I've made 2 trips to the genius bar...they've even swapped out the phone. The new phone was fine UNTIL I restored from backup...now it's locking up. Voice dialing is fine, and generally dialing from favorites is ok. I'm running 4.2.1, but this started prior to that. I've ntocied the screens 'staggering' a bit between changes.

    So don't restore from Backup then?.
    If something is messed up in the backup then starting again will give you a nice clean functional phone - no brainer really.
    I did it last week and so far, not a single issue.

  • How do I get search typing for Contacts Search function on Iphone with 2.0?

    An ad for 2.0 iphone update says:
    "Contacts Search
    Have a lot of names in your address book? Type a name into the new Contacts search field and iPhone shows you matching names."
    Now I have 2.0 and can't find a way to get into the Contacts search field. Anyone having better luck with that? Please help.

    Did you just install 2.0? Is your contact list showing you your first entry when you open it? Try scrolling up to the top of your list.

  • Spotlight Search/Contact Search

    Appears that Apple is misleading what the spotlight and contact search function can do on the 3.0 software update. First, spotlight will not search the content of emails.... just the header/title. Secondly, neither spotlight nor contact search will search all the fields in a contact. Just raised this issue through a one-on-one session at a local apple store, and all the employees in the store were surprised as they too thought the 3.0 update would do this. It's abt setting expectations and delivering. At the 12:10 mark on the Apple online video, there is discussion abt the search function, and it leads one to believe that all the fields in contacts are searched. Very disappointed as I've 3,000+ contacts and will not remember all the names/company names. Are there any applications that will search all fields in a contact... including the note field? This is my first iPhone. Thanks.

    I have sent messages to Apple Feedback requesting true Spotlight search in Contacts. I have been very frustrated that the iPhone still cannot perform a search that equals what my first Palm PDA could provide. MobileMe does not provide a workaround because the search feature in MobileMe does not look in the Notes field.
    Today I discovered an iPhone App that searches the "Notes" and other fields in Contacts! Contact Tool from Alessandro Levi Montalcini. While not perfect, because it is a little slow, but it does work. A well spent $1.99 for a feature that Apple should be providing.

  • Where's the Contact search function?!

    I updated my iPhone to 2.02 already, but can't find where's the contact search function.

    Allan Sampson wrote:
    To quickly move to the top of your contact list, tap on the menu bar for lack of a better term.
    Doesn't work for me. Had to revert to ordinary finger-scrolling.

Maybe you are looking for

  • My itunes library is not syncing to my ipod classic what can I do?

    My ipod classic was not being recognized by my computer and Itunes was not able to pick up the connectivity. My ipod would unplug itself and not sync my Itunes library. I unplugged it and replugged it. What can I do to fix this problem and how do I f

  • How to get the Count of a logic?

    Hi, Very new to CRM. I am trying to get the count of "activity start time" that are greater than current time stamp. Count(activity start time) work. I don't know how to add the time stamp condition to this. I can't add this condition as filter. Appr

  • Themes 7.0 restore?

    I am not sure if this is what happened but, I seemed to have overwritten a Theme in iDVD. The default pics and sound are gone from the Soft Main 7.0 theme. Is there a way to restore iDVD themes? Or, what could I have done wrong? Thanks!

  • Help changing AS3 -- AS2 please

    I was following a tutorial in AS3 with a MouseEvent but really want to use it in AS2. There is an Input Text box named boxOne that a user enters their name You click on myButton and in then in boxTwo should appear the test "Welcome to our class" and

  • Sending "filled in" PDF forms to iphone sometimes empties the form? Why?

    Why do standard "fill in the blank" adobe forms after being "filled in" drop all the "fill ins" when they arrive at the iPhone, but hold the information when sent to standard Apple and PC computers ?