Container layout changed with adapter.

Why does TestStand container layout changes based on the adapter selection?
When using NumericLimitTest type with a none adapter the "Units" is visible.
But when using NumericLimitTest type with CVI adapter "Units" variable is not visible in Result container? Why?
Is it not correct that NumericLimitTest type Result container will always contain:
1. TS
2. Error
3. Status
4. Numeric
5. ReportText
6. Common
7. Units
8. Limits
9. Comp
Although TS container may change position.
CLD,CTD
Solved!
Go to Solution.

When using NumericLimitTest type with a none adapter the "Units" is visible.
But when using NumericLimitTest type with CVI adapter "Units" variable is not visible in Result container?
Does anyone know if there is a way to identify for a specific test if Units will be present in container or not? This is when traversing through a single result container in modelsupport.dll (c_report.c file).
CLD,CTD

Similar Messages

Iphoto book page layout changes with the addition of a photo problem.

I'm making a photo book of a recent road trip. There are times when I select a page,,, perhaps a page with 6 photos. The layout appears as the grey squares with a large vertical one on the left, 4 small ones in the upper right and a larger square in the bottom left (in the 'picture book theme).,,,,,, a really nice 6 photo page. I get 4 photos in on the page and when I add the 5th photo the page flips and puts the large photo on the right side while at the same time changes the photo with one of the smaller ones.
Is this a software bug? It doesn't do it on all the pages only at times.
It's driving me a bit nutz. Is there something i'm missing?
Macbook Mac OS X (10.4.9)
Macbook Mac OS X (10.4.9)

As a first step I save the “wrong page” as a PDF from the print dialogue. That gives me a template for positioning guide lines in Photoshop that match the sizes and margins in the book layout.
Then I open that PDF in PS. You will be prompted for a resolution and colour mode, use 300 pixels per inch and RGB mode. (If you've ended up with a multi-page PDF in the first step, PS allows you to select a specific page to open.)
When PS has rasterised the page, press Apple + R and position your guide lines by pulling them out from the page rulers – you might want to increase the magnification to 200%. Align the guide lines with the edges of your images.
Now you can delete the dummy layout image and fill the canvas with white. (At this point you might want to save the image as a template for future use.)
One by one you can now precisely place your images and crop them along the guide lines – Snap to Guides needs to be enabled for that. Once you’re satisfied, flatten the image and make sure it’s in the sRGB colour space. If not, go to Image > Adjust > Convert to Profile... to change it.
I save mine as JPEGs at maximum quality, but for instance Tiff would work fine, too.

Safari CSS layout changed with new 5.1 version??

The latest release of Safari (5.1 6534.50) for OS X 10.6.8 and Windows that was released just after Lion was launched has caused some strange changes in the layouts of my Web sites. On certain pages with form fields, text on the same line has changed position to where some of the text now is positioned higher than other parts of the text.
The only difference in the text is the use of BOLD tags or SPAN tages around text. THis also seems to only occur in a row where there is text AND a form field, such as a text input field. Very very strange. No other release of Safari to-date has ever screwed up formatting - its typically IE that has all those problems.
Here is a sample of a place where some bold tags causes the text to jump around:
And the code:
<tr>
<td class="frmColTR1">Billing Contact (l,f)</td>
<td class="frmColL2">
<input type='text' name='bill_contact_lname' value="Last" size='18' maxlength='60'>
<input type='text' name='bill_contact_fname' value="First" size='18' maxlength='60'>
<b>Visa</b> expires on: <b>12/2013</b> in <b>29</b> months</td></tr>
I really dont want to have to go back and change hundreds of pages of our online application to have special code just for Safari to deal with this new formatting bug.
Does anyone at Apple have any ideas as to why this issue is occuring?

I'm seeing quite a few layout issues on various sites. I'm a little surprised that no more people have been complaining.

Bizarre, Dramatic Layout Changes with Font Formatting

Suddenly when I try to bold or italicize type, the entire iWeb page changes. The word/text I'm trying to format disappears, and all the text boxes expand and move down the page. Bizarre!
Adding to the mystery, this doesn't happen with all iWeb templates/themes, but it definitely happens with Goldenrod and Highlighter.
Thoughts?

In case someone else ever needs it, I found the answer:
The "excerpt" view does not include formatting. Only after clicking "read more" and going to the individual blog entry page does the formatting show.
I had my blog set up so that the excerpts were very long (so that readers don't have to click again).
It would be nice if the formatting were to show even in the excerpt view, so if anyone has a tip for making this happen, I would be interested to know about it
Lance

Report layout changes with the values in it

I he a standard report, but i want certain report rows to show up in red when a value of the row is null.
I know you have to use different templates, but how or where do i need to put the condition to change report row templates?
Thanks

Use multiple row/column templates (there are up to 4 available in a report template), controlling which is used via the Row/Column Template 1 Condition and Row/Column Template 1 Expression etc, depending on whether it is a named column (row) template or a generic column template.
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/themes.htm#BABFFGGJ

WSRM Adapter replaced with soap in PO7.4. Getting error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error"

Hello All,
We have scenario proxy->pi->webservice. In older versions of PI system they used wsrm adapter at receiver side and it's working fine.
Receiver interface is asynchronous. So no response structute is present and receiver service is business component(since receiver is a third party).
During migration, we have replaced the receiver adapter with SOAP adapter and used message protocol as SOAP 1.1 but the message is failing and in communication channel it is showing error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error". In this case the receiver interface is stateless xi 3.0 compatible(re using the old), after changing it to just stateless also issue persists.
In target url field if i prefix the url with "http" then above mentioned error is occurring otherwise if i use the hostname:port/path.. then it is giving error
"soap: Call failed: com.sap.aii.af.sdk.xi.srt.BubbleException: Unsupported protocol". So maintaing the url as http://hostname:port/pat.....
As in old channel wsrm channel there is no userid and password, i haven't given any userid/pwd in receiver channel.
used the bean sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean with parameters
Module Key = soap
Parameter Name = noSOAPMakeSysErrFromResponseFault
Parameter Value = false
and
xmbws.No SOAPIgnoreStatus = true
but not successful.
Please help me. I got stcuk here.

Hello Jannus,
The connectivity is working fine. Network team has confirmed it. I doubt that any strucutre(header) difference might be present in message when sending with wsrm adapter compared to sending with soap adapter.
Please let me know the exact difference between soap and wsrm functionality in receiving end.
By considering the structure issue, i have checked the "do not use soap envelope" check box, then i got error "Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type"
Then i used message transform bean, but not successful.
Regards,
Ch.Venkat.

The report in FI which contains Quantity field with every line item

Hi Gurus,
What are the reports in Finance which contains Qty field with every Line Item reports & reports that contains user name & System Id in it along with other informations e.g. G/L, Ar, AP
Thanks & Regds,
Santosh Rothe

Hi
Using the line item display report you can get the required details by changing layout in the output:
FBL1N: Vendor line item
FBL3N: G/L line item
FBL5N: Customer line item
VVR

Scrolling changes with build 455 (706481)

It seems something changed with scrolling from build 452 (705274) to build 455 (706481). The below works fine in 452 (705274) but in 455 (706481) if i scroll down to the bottom i cant scroll back to the top. I origanlly thought it was an issue with images b/c we have a lot of InlineGraphicElements and saw some comments about scrolling issues with images in the last change log but made this test and its happening without them.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
     xmlns:mx="http://www.adobe.com/2006/mxml"
     layout="absolute"
     horizontalAlign="center"
     applicationComplete="init()">
    <mx:Script>
         <![CDATA[
             import flashx.textLayout.BuildInfo;
             import flash.utils.*;
             import flash.text.engine.*;
             import flash.display.*;
             import flash.events.*;
             import flashx.textLayout.elements.*;
             import flashx.textLayout.formats.*;
             import flashx.textLayout.container.*;
             import flashx.textLayout.events.*;
             import flashx.textLayout.edit.*;
             private var container:Sprite = null;
            public function init() : void
                 container = new Sprite;
                    textArea.rawChildren.addChild(container);
                  var textFlow:TextFlow = new TextFlow;
                  textFlow.interactionManager = new EditManager;
                  textFlow.flowComposer.addController(new ContainerController(container, textArea.width, textArea.height));
                 var i : uint = 10;
                 var total : uint = i;
                 while( i )
                     var dv : DivElement = new DivElement;
                     var sp : SpanElement = new SpanElement;
                     sp.text = i + "/" + total + " " + BuildInfo.kBuildNumber;
                     var p : ParagraphElement = new ParagraphElement;
                     p.addChild(sp);
                     dv.addChild(p)
                     textFlow.addChild( dv );
                     i--;
                   textFlow.interactionManager.setSelection(0,0);
                 textFlow.interactionManager.setFocus();
                 textFlow.flowComposer.updateAllControllers();
         ]]>
     </mx:Script>
    <mx:Canvas
         height="50"
         width="100"
         backgroundColor="#FFFFFF"
         id="textArea">
     </mx:Canvas>
</mx:Application>

I got the textLayout.swc from the 4.0.0.8217 gumbo build. I did look at the release notes http://opensource.adobe.com/wiki/display/flexsdk/changes4.0.0.8217. Only saw something about nullTabStopFormat and defaults possibly the change was made in another nightly build or i just missed it. Is there a better place to look for changes?
Thanks for the heads up about the API changes. Overall i think things have been going pretty smooth considering ive been working off weekly builds for the past 8 or 9 weeks. You guys have also been very receptive on the forum. Ill be ready for the API changes Monday when I update to the next weekly build.
Cheers

Container Layout Web Item supported for PDF Printing (Stack 11)

Dear all and Mr. Prakash Darji
I had an information that PDF export would be supported for Container Layout Web Item with SPS11. We hrecently have installed SPS11 but the functionality is still not available.
Does any one have more info on this ? Has SAP changed the plan ?
The current document at the service marketplace about functional enhancements on the following link does not say any thing about this.
Link:
<a href="https://websmp202.sap-ag.de/~sapidb/011000358700004483762006E">Functional Enhancements Schedule BI in NW 7.0 (2004s)</a>
I would be greatful for any input on this
Thanks
Gudu
P.S. My information has been based on a document from Mr. Prakash Darji
Title:Publishing Strategies
11/13/2006
NetWeaver RIG

I' an APEX newbie and believe I am having the same or a similar problem. I am (for now) developing a system using the hosted Apex development system online. I have created a Report Query which works fine with the default layout. I downloaded the XML (tried both sample data and schema) into Word 2007 with the BI Publisher Template Builder. I used the table wizard to create a simple layout containing all columns with no customization at all. Saved as an RTF, uploaded to Apex as a Report Layout, associated it with the Report Query, clicked Test Report -- and I got nothing.
When the is a PDF, I get the same error you mention ( Adobe Reader could not open the <file name> because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded ). If I switch to an HTML file the out is just a blank screen.
If I switch back to generic report layout, it works fine. This suggests there is something wrong with the template, though it looks fine in Word with the sample data.
I've searched the forums and Google for the better part of a day. What am I missing?

Photos and layouts change size when adding photos in book layout

I am using the Classic layout to create books.
Sometimes, when I move a photo down into the layout, unpredictable things happen. For example, when I drag a photo down onto the page layout, sometimes the photo will change sizes, and sometimes the layout will move around (esp. with 3 or 4 images on a page). On a page with a single image, sometimes the photo comes in large, and sometimes it shrinks. On a 3 photo per page layout, sometimes the layout starts with 3 photo boxes in a row. I can add one or two, and then I add another (could be the 1st, 2nd or 3rd - it's the image file that I think triggers the change) and all the boxes scramble and instead of a row of 3 equal-sized boxes, now I have a page with 1 big and 2 small boxes. Totally unpredictable!
Is there any way to control this?
All the photo files I'm starting with are high resolution tiffs, around 8 inches square (most are squares, not 4x6 snapshots) at 300 dpi.
I have had this issue on 3 computers (and probably 2 different versions of iPhoto): a 2-year-old G5, and two brand new iMacs.
Any help or advice is welcome. Thanks.
iMac Mac OS X (10.4.8)

If you Control-click on the square photo in a book frame you can select the "Fit photo to frame size" option and the entire image will be contained in the frame. there will be some white space on the short side.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Editing the Text May Cause Layout Changes Message

I have tons of files created in old illustrator 6.0 and now that I have CS2 loaded on Mac OS X.5.8 I'd like to open and edit some of these documents.
It says, "This file contains text that was created in a previous version of Illustrator. This legacy text must be updated before you can edit it." It asks you to either Choose Update or OK to update later.
So I chose Update for one of the files, save without compression. Then I open it and it looks OK. I thought that this UPDATING would allow me to work with the document freely. However, when I attempt to change some type I get a warning saying that "Editing the text may cause layout changes.• Choose Copy Text Object to update the text and preserve the original layout as a separate object. • Choose Update to update the text without creating a separate reference object." Why am I getting this warning? Do I really have to click on every bit of type I wish to edit and deal with this message each time? If I choose "update" the type disappears entirely and if I choose "copy text object" it grays out and I can't select it. Either way I have no way of editing my document.
Please advise and keep answers as simple as possible.
Thanks.
http://s277.photobucket.com/albums/kk61/exitrealestate001/?action=view&current=bydefault2. jpg
http://i277.photobucket.com/albums/kk61/exitrealestate001/bydefault2.jpg
<a href="http://s277.photobucket.com/albums/kk61/exitrealestate001/?action=view&current=bydefault2. jpg" target="_blank"><img src="http://i277.photobucket.com/albums/kk61/exitrealestate001/bydefault2.jpg" border="0" alt="Photobucket"></a>
[IMG]http://i277.photobucket.com/albums/kk61/exitrealestate001/bydefault2.jpg[/IMG]

Hi Mylenium,
Wow. What a nightmare. We're not talking just retyping, it's really re-typesetting etc.
Tell me, if I were to copy and paste the old document into a new one or something like that, would that bypass this problem?
Also, someone in another thread which I started (link to it below) mentioned that I could "batch update the files as CMYK and with the legacy type updated as well." I know that it's separate issue, but I was wondering if I were to do this, might it help with this Text Editing issue?
http://forums.adobe.com/message/2740960#2740960
Please advise.
Thanks in advance, very much.

How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created ?

Dear Abapers,
I request the Abapers kindly reply for this blog
I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ?
I checked in SE03 transaction the transport request was there. But I want to retrieve the existing transport request which is not moved to Quality?
Is it possible to retrieve the existing transport request in development which is not moved to quality ?
Like how we retrieving the programs using versions in development server, In the same way I want to retrieve the sapscript layout in development server ?
Thanks & Regards
Muzeebur Rahiman.S

Hi,
There is no version management for SapScript or Smartforms .
When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
cheers
Jānis

Your Computer does not contain a proper graphics adapter??

I treated my self to a new Macbook Pro with the AMD Radeon HD 6750M 1GB graphics cards..
Now that I've got everything up and running just dandy I Bootcamped Windows 7 (64 bit) on it to see how it would handle some gaming, I tried installing the latest graphics drivers from AMD and am presented with this error message :
"Your Computer does not contain a proper graphics adapter."
Is this normal?? Has Apple restricted the installations of drivers on the MBP or have I got a problem?

Hi folks! I was scouring the web for some answers and got pulled to this thread. I've got a mid-2011 iMac 27", i7 with the 2gb HD 6970M (bootcamping Win7, 64-bit) and I also get that same error as OrphanGymnast when attempting to play the Battlefield 3 Beta. Whenever I try to join a server it says my Catalyst version is out of date and that I need to upgrade, in turn it only references the generic AMD url. However, the game still manages to play, but I'm not sure if I'm getting the proper performance I should be getting with the latest driver. Anyway I tried AMD's auto detector and nothing...same message shown above in the OP. Now I find myself here.
I'm not that hardcore about pc gaming so messing around with drivers and such is pretty new to me. From what I gather the reason for getting, the "Your Computer does not contain a proper graphics adapter." is because mobile/laptop GPU's have to rely on their manufacturers (Apple, in our case) to roll out their specific driver updates and not AMD. I used the following links, but encountered a few problems.
Driver Install Instructions for Win7: http://support.amd.com/us/kbarticles/Pages/GraphicsDriverInstallationInstruction forMicrosoftWindows7.aspx
ATI Catalyst Mobility Display Driver: http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx#2
When I tried to uninstall the current ATi catalyst it was not showing up in "Programs and Features". I figured I could then just run the CCC and saw there was an uninstall option through there. CCC ran the uninstall, but the progress bar got hung up about 99% of the way through and after about a half hour in that state, I decided to End Task. By now, my display is all out of wack since it deleted the original driver. I rebooted and proceeded to install the 11.9 catalyst and that too got hung up about halfway through for a while...had to End Task again. Rebooted and display was still jacked up so I just threw back in my Bootcamp Support Disc and repaired drivers...now all things back to normal (display driver v8.812).
So now that I'm back at square one, would anyone that successfully updated their mobile GPU care to tell me where I messed up? I would greatly appreciate it. I apologize for the long read, but I wanted to be as clear as possible.
Thanks!

How do I put the page number in my header so the header changes with every page

I need to write a paper for my english class and I need the header to contain the page number so it changes with each consecutive page.
I need to know ASAP! Thank you!

Click in your header > Menu > Insert > Page Number
Peter

What happens to iweb-built site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3), and subsequently upgrade to 10.6.8 or even 10.7? Will fonts stay the same? Will layout change? Or anything else change? Thanks

What happens to iweb-build site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3) and subsequently update that to 10.6.8 or even to 10.7? Evidently iweb has been discontinued. I have version 3.0.3 of iweb now but understand that there's been an update for OS 10.6 so same question goes for this update.
Will fonts change? Will layout change? Will widgets still work? Links? Will Google Analytics PlugIn still work?
(Since MobileMe is disappearing, I now save iweb site to local folder on my computer, then upload it to GoDaddy using Cyberduck. I run Google Analytics plug in on folder before its uploaded.)
My computer, MacBook Pro came with iweb, which has been updated to 3.0.3. Since iweb is discontinued, will upgrade of operating system just ignore iweb so that iweb will run the same as before? Or will it wipe it out? Or change how it currently works (questions above).
Thanks

As you now know iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two features will be broken.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: iW14 - Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
NOTE: the iLife 11 boxed version Is no longer available at the online Apple Store. To get a copy you'll have to try Amazon.com or eBay.com.
This may be of interest to you: Life After MobileMe.
OT

Container layout changed with adapter.

Similar Messages

Maybe you are looking for