Contains errors and distribution lock
Hi all,
We have a error as "contains error, distribution lock"(system status)in the status of the service confirmation. Document is in Open status and with this error any changes are not replicating to the r/3. This is the only one document with such error. All other confirmations are getting replicated to R/3. Bdoc error segment for this confirmation is "NO upload into ERP,ERP adapter is called".
How can I remove this error? Any reports available to remove? what is the cause for this issue?
Thanks In Advance
Hi,
Please try to find the relevant bdoc in SMW01 . It is probably in intermediate status or there could be an error in the bdoc.
The must be a pending outbound queue or inbound queue in SMQ1 or SMQ2 in CRM.
One reason why the order is not uploaded properly can be due to filter settings in R3AC1 for object SALESDOCUMENT.
I.e. you would not allow to download the same document to CRM and therefore the complete loop is not run ok.
Please check R3ac1 as well.
If this is sill not helping please check as well the report CRM_ODE_CHECK_CFG (as per note 490932) and check if there might be obvious settings which might block the data transfer of this order type.
Best regards
Christophe
Similar Messages
-
AirSAMSMCalendarPrv.c(F002)1962 error on Centro locks up phone
When I sync over the air w/ Exchange (2007) I get 2 errors:
Error:
ASSERT FAILED!
AirSAMSMCalendarPrv.c(F002)1962
Error:
ASSERT FAILED!
AirSAMSMCalendarPrv.c(F002)1514
After the sync, the next time the phone attempts to sync, it locks up and I have to soft reset.
A Hard Reset eliminates the lock up, but as soon as I re-configure to sync w/ my Exchange server, I get the same two errors and start locking up again.
I have read in other locations that this error indicates a corrupt calendar entry, and I need to track down the offending entrie(s) and delete them in order to resolve the issue.
Can you confirm this is the case, and if so, how do I find the correct calendar entries w/ out deleting my entire calendar?
Thanks,
Frank.
Post relates to: Centro (AT&T)AT&T and Palm Phone Support helped figure out a way to selectively sift calendar items in order to get the offending ones purged:
Create a new folder in your Outlook root mailbox (name it Cal2 or something)
In the Create new folder dialog box, be sure to set it to Folder Contains: Calendar items
Click on Calendar in your Outlook client, choose View> Current View > By Category. This lists your Calendar items as a list rather than a calendar
Start dragging batches out of the Calendar into Cal2 and re-syncing w/ the handheld unit. Watch for the error.
If you see the error on re-sync, drag a smaller batch and re-sync.
If you don't see the error, drag a new batch back over from Cal2 and re-sync.
Use this batching method to narrow down where the offending calendar item is until you can pinpoint and eliminate it.
Thanks to all who commented!
Post relates to: Centro (AT&T) -
ERROR ITMS-9000: "META-INF/container.xml must contain one and only one root file reference."
Hi all,
After correcting a table-of-contents error in my .epub file, I am unable to upload it via iTunes Producer. It lists this error message:
ERROR ITMS-9000: "META-INF/container.xml in 9780615431727.epub must contain one and only one root file reference." at Book (MZItmspBookPackage)
The file has been verified and only has one root file reference in the container.xml file.
Has anyone been able to find a solution to this problem?
Thanks!Hello Forum Users…
For those of you who have run into the upload roadblock, getting an error message similar to this:
Package Summary:
1 package(s) were not uploaded because they had problems:
/Users/slm/Desktop/MUSIC to PICTURE for IBOOK/2012 MTP for iTUNES Bookstore/9780615600918.itmsp - Error Messages:
Apple's web service operation was not successful
Unable to authenticate the package: 9780615600918.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): 'p50': fragment identifier is not defined in 'OPS/content9.xhtml'" at Book (MZItmspBookPackage)
Following is a "specific" fix, but the idea of the fix will help you with your specifics too.
I tried for 17 days to upload a book that looked and worked perfectly in iPAD via Preview.
After many discussions with Apple, who to their credit stayed with me over 2-3 days, I decided to play a hunch.
I went into a duplicated copy of the book and on every page, (because the error message was not telling the whole story), looked for what InDesign would call "Overset Text."
Now... the "flaw" in iBOOK Author (hint) is that it won't advise you of this "overset text" as does InDesign.
And to compound the matter, the exported ePUB document WORKS in iPAD Preview.
See Screenshots from InDesign:
Okay... Couldn't add it but it is a Warning Box that says there is overset text. (Characters which exceed the text box.)
Nevertheless, I played this hunch, and sure enough found a few boxes with the + in them. In other words I clicked on EVERY text holder and every text block in the entire document.
Where I found + signs, I simply deleted some carriage returns from the iBOOK file... (please note… carriage returns and literally empty spaces that caused the overset text) and then erased all previous copies of the Music to Picture Book on my hard drive, iTUNES and iPAD.
The result? A "text-book" upload with no snags! As my Son would say… "Victory!"
So, first make sure that you are using only PNGs, Jpegs and Movie files to iBook Specs. Then... make sure there are no overset text boxes, which you must do manually.
Enjoy & Godspeed!
Steve
Stephen Melillo, Composer
STORMWORKS®
209 Spinnaker Run
Smithfield, VA 23430-5623
USA
v/f 757-356-1928
stormworld.com
“History is a vast early warning system.” Norman Cousins, editor and author (1915-1990)
"This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." Leonard Bernstein
“If you have a chance to help someone, and you don’t, you are wasting your time on this earth.” Roberto Clemente -
Error "Unkown Bravo Error" and "Invalid Container Error"
I am trying to render in After effects and keep getting the error "Unkown Bravo Error" and "Invalid Container Error". What do I do to resolve this?
Try using the "secret" preferences to purge every couple of frames. If you hold Shift while clicking on After Effects > Preferences > General, the Secret menu should pop up in the sidebar of the Preferences dialog.
Alternatively, if rendering to a QuickTime with the video codec set to PNG instead of Animation didn't work, try rendering to a PNG sequence and not a video format at all. -
Plugin container give me error and firefox hangs and take me to crash
this is error and also most of the time it also not responding i m using windows XP SP3 completely updated and also using the avast anti virus flash make ur service low down and the fact is that u r not able to create ur own HTML5 script so follow what adobe tells u to do and dont make things verse more for us coz u people are really not taking a good look at flash even u know every thing is running on flash now so take this shit pluggin container out of this and merge them in one and also it take about 50% of cpu if u play flash game on facebook
Hi spidey23, the original problem in this thread is that the QuickTime 7.6.6 plugin is marked as vulnerable and needing an update, but none is available for MacOS X 10.6.
It sounds as though you might be having a different problem, which is you are not getting any sound accompanying your videos -- is that the problem? If so, you might want to start a new thread which focuses on that issue and mention in the subject line (the question) that it's on the Mac. You can do that here:
https://support.mozilla.org/questions/new/desktop/fix-problems -
Error in SMW01 Invalid sales and distribution area
HI All,
issue: Suddenly some BP's Bdoc's(BUPA_MAIN) are getting failed and In CRM smw01 shows the below message
1)Invalid sales and distribution area, CRM_ORGMAN, 203
2)Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.,SMW3
When i check the Bp data in CRM sales are is successfully updated and Buffer HRBCI_ATTRIBUTES_BUFFER_UPDATE also updating schedule.
when i am trying to reprocess the error Bdocs system gives the message that "Bdoc successfully processed,0 Bdoc failed".
what is the reason for this error Bdoc's, how to clear this error Bdoc's suggest ?
Thanks,
shoki.Hello Shoki,
Please check whether that sales org and distribution channel are existing in CRM.
Thanks and Regards
shanto aloor -
Lion locks files containing photos and you must unlock to save
Hello Lion Users
If you haven't run across this one yet, you probably will. If you open a Pages document containing a photo and you reduce the file size you cannot save it without responding to a dialogue saying that the file hasn't been changed in two weeks and it locked and you have to answer UNLOCK to save it.
This also happened to me when I downloaded photos to my desktop which were taken TODAY. Before I could crop them in PREVIEW, I had to go through that dialogue to UNLOCK and then save them.
There is NOTHING about this on the Apple Support site at this point. But here is the solution.
For some reason, probably having to do with the auto-save and version-save feature in LION, Apple has decided to check the box in the Time Machine PREFERENCE pane to lock files when they haven't been accessed for two weeks. If you don't use Time Capsule (and I don't) you wouldn't think to go to that preference pane when you upgrade to Lion, so this really is a strange thing to do to users.
Go to the Time Machine Prefernece pane and UNCHECK the box to lock files automatically and you won't have this problem any more.
I hope Apple will uncheck that box for new installations because it is a very annoying thing to have to unlock all of these photos before you can save them.
MikeHi Mike,
I browsed the whole night and I found the solutions, unchecked the lock on time machine!! Thanks so much.
Now, my photos are unlocked but when i edit it, i can't save, please help me again!!
thanks very much! -
LYNC Server 2013 LS Address Book and Distribution List Expansion Web Service error - Event ID 62005
Hi,
Recently, I found some of LS Address Book and Distribution List Expansion Web Service error from Lync 2013 Front End Server, kindly advise help how to solve it. many thanks
Distribution List Expansion Web Service failed to initialize.
Exception: The server is not operational.
Cause: Unexpected exception occurred during initialization.
Resolution:
Examine exception details in event to determine the resolution.
Best Regards
ThomasHi,
You can do the following steps to solve the issue:
Please double check the Windows Firewall is turned off.
Please check if the CMS replication update to the latest version.
Make sure Lync Server update to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
i enter too many times a wrong pasword and it lock for 23,465,444 minutes and i try to reset but its not hapening
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
Issue with container divs, and absolute/fixed positioning
Hello everyone, I have an issue getting my divs to function properly. I have a container div and I want the table div to float inside (and move with page resize). Right now it doesnt move with the page (see photo).
However, when I change the position to relative of that div, it moves under the container div and locks itself there.(Second photo)
Any help would be great! Thanks!
Picture one:
Picture two
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<!-- TemplateBeginEditable name="doctitle" -->
<title>davide marchetti architetto</title>
<!-- TemplateEndEditable -->
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.js"></script>
<link href="ttp://mottie.github.com/tablesorter/css/theme.blue.css" rel="stylesheet">
<script type="text/javascript" src="http://mottie.github.com/tablesorter/js/jquery.tablesorter.js"></script>
<script type="text/javascript" src="http://mottie.github.com/tablesorter/js/jquery.tablesorter.widgets.js"></script>
<script type="text/javascript">
$(document).ready(function()
$("#myTable").tablesorter();
</script>
<style type="text/css">
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background-color: #FFFFFF;
margin: 0;
padding: 0;
color: #000;
background-image: url();
background-repeat: no-repeat;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color:#414958;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #4E5869;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ this container surrounds all other divs giving them their percentage-based width ~~ */
.container {
width: 80%;
max-width: 1260px;/* a max-width may be desirable to keep this layout from getting too wide on a large monitor. This keeps line length more readable. IE6 does not respect this declaration. */
min-width: 780px;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout. It is not needed if you set the .container's width to 100%. */
/* ~~ This is the layout information. ~~
1) Padding is only placed on the top and/or bottom of the div. The elements within this div have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
.content {
padding: 10px 0;
font-size: x-small;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the overflow:hidden on the .container is removed */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
body,td,th {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
#apDiv1 {
position: relative;
width: 618px;
height: 268px;
z-index: 1;
left: 186px;
top: 147px;
overflow: hidden;
#apDiv2 {
position: relative;
width: 698px;
height: 299px;
z-index: 1;
left: 266px;
top: 117px;
overflow: scroll;
table.tableizer-table {
border: 1px solid #CCC; font-family: Courier New, Courier, monospace;
font-size: 12px;
.tableizer-table td {
padding: 4px;
margin: 3px;
border: 1px solid #ccc;
.tableizer-table th {
background-color: #000000;
color: #FFF;
font-weight: bold;
#apDiv4 {
position: relative;
width: 697px;
height: 299px;
z-index: 1;
left: -141px;
top: -636px;
overflow: scroll;
#apDiv3 {
position: relative;
width: 700px;
height: 300px;
z-index: 2;
h1,h2,h3,h4,h5,h6 {
font-family: "Courier New", Courier, monospace;
</style>
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
</head>
<div class="container">
<div class="container"><img src="../images/Davide.png" width="800" height="600" usemap="#Map" border="0" />
<div id="apDiv2">
<map name="Map" id="Map">
<area shape="rect" coords="48,416,125,435" href="../news.html" />
<area shape="rect" coords="262,416,304,436" href="../studio.html" />
<area shape="rect" coords="490,416,545,435" href="../projects.html" />
<area shape="rect" coords="702,415,751,436" href="../contact.html" />
</map>
<table id="myTable" class="tableizer-table">
<thead>
<tr class="tableizer-firstrow">
<th>YEAR </th>
<th>PROJECT</th>
<th>LOCATION</th>
<th>CATEGORY</th>
<th>STATUS</th>
</tr>
</thead>
<tbody>
<tr>
<td>2013</td>
<td>EXPO 2015 - Italian Pavilion</td>
<td>Milan - Italy</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td>2012</td>
<td>Requalification of "Almerici", "Bufalini" and "Fabbri" Squares</td>
<td>Cesena - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Re-thinking Shanghai: sustainable intervention along the Suzhou Creek</td>
<td>Shanghai - China</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>VCC Flat</td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td>2011</td>
<td>London 2012 Olympic Games Information Pavilion</td>
<td>London - UK</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Enhancement project for the sacred area of the sanctuary of Hercules Victor</td>
<td>Tivoli - Italy</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td>2010</td>
<td>VTL Flat </td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>BNC Flat</td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>Expansion of the "Farnesina" High School</td>
<td>Rome - Italy</td>
<td>Education</td>
<td>Competition / Selected Project</td>
</tr>
<tr>
<td> </td>
<td>Neanderthal Art Center</td>
<td>Pilo�a - Spain</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>New pedestrian & cycling footpath in the site of the "San Leopoldo II" old bridge</td>
<td>Poggio a Caiano - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Proposition 2065 - St. Leonards site</td>
<td>Sidney - Australia</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>MEIS - National Museum of Italian Judaism and Shoah </td>
<td>Ferrara - Italy</td>
<td>Culture</td>
<td>Competition / 3rd Prize</td>
</tr>
<tr>
<td> </td>
<td>36 The Calls Design Competition</td>
<td>Leeds - UK</td>
<td>Offices</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Europan 10: masterplan for an harbour area</td>
<td>Rudk�bing - Denmark</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td>2009</td>
<td>"Scuola in Piazza a Levante" - Kindergarten and public areas</td>
<td>Bisceglie - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>CIBAF - City of Kids </td>
<td>Frattamaggiore - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Designing in Teheran</td>
<td>Teheran - Iran</td>
<td>Mixed use</td>
<td>Competition / Selected Project</td>
</tr>
<tr>
<td>2008</td>
<td>DawnTown 2008: Waterworks</td>
<td>Miami - USA</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Venice Biennale New Australian Pavillion</td>
<td>Venice - Italy</td>
<td>Culture</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>New pedestrian and cycling bridge</td>
<td>Civita di Bagnoregio - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "San Ciro" Square</td>
<td>Portici - Italy</td>
<td>Urban planning</td>
<td>Competition / 2nd phase selected / 3rd Prize</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "Umberto I�" Square</td>
<td>San Ferdinando di Puglia - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Historic Renovation of the "Corsie Sistine" Hospital Wards </td>
<td>Rome - Italy</td>
<td>Culture</td>
<td>Tender Competition (design/bid/build)</td>
</tr>
<tr>
<td> </td>
<td>Cupboard</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>Office table and lighting system</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>New City Library</td>
<td>Legnano - Italy</td>
<td>Library</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Office table</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Volleyball Arena, Hotel and Commercial Spaces</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2007</td>
<td>New Provincial Archaeological Museum in the Santa Scolastica Monastery</td>
<td>Bari - Italy</td>
<td>Culture</td>
<td>Competition / 5th Prize</td>
</tr>
<tr>
<td> </td>
<td>The City of Water and Health</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Parkway Iconic Bridge</td>
<td>Sheffield - UK</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "Loveno 84" Sport Center</td>
<td>Menaggio - Italy</td>
<td>Sport</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>"Guardia di Finanza" Corp Main Headquarters</td>
<td>Catanzaro - Italy</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>"Lega Lombarda" Real Estate Complex Urban Development</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Tender Competition (design/bid/build) </td>
</tr>
<tr>
<td> </td>
<td>Necklace</td>
<td>Rome - Italy</td>
<td>Jewellery design</td>
<td>Prototype </td>
</tr>
<tr>
<td> </td>
<td>Moon putter</td>
<td>Rome - Italy</td>
<td>Product design</td>
<td>Prototype</td>
</tr>
<tr>
<td> </td>
<td>Aleale Coffee Table</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2006</td>
<td>"1st October" Public Square</td>
<td>Santa Maria Capua Vetere - Italy</td>
<td>Urban planning</td>
<td>Competition / 1st Prize / Built</td>
</tr>
<tr>
<td> </td>
<td>"Attilio Pecile" New Square and Sustainable Mixed Use Building</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>Renewal of the "Porta Nuova" Old Tower</td>
<td>Venice - Italy</td>
<td>Culture</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>"Meno e pi� 4": Civic Center and Pre-school Building</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / Mention</td>
</tr>
<tr>
<td> </td>
<td>Urban Renewal of Historic Building and Public Squares</td>
<td>Conversano - Italy</td>
<td>Urban planning</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>New Seafront and Beach Accesses</td>
<td>Fregene - Italy</td>
<td>Urban planning</td>
<td>Competition / Mention</td>
</tr>
<tr>
<td> </td>
<td>Requalification of Main Streets and Squares of the Old City Centre</td>
<td>Bari - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Gyeonggi-do Jeongok Prehistory Museum</td>
<td>Jeongok-ri - South Korea</td>
<td>Culture</td>
<td>Competition / Honourable Mention</td>
</tr>
<tr>
<td> </td>
<td>Low-income housing development</td>
<td>Guadalajara/Ceuta - Spain</td>
<td>Residential</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Shop extension</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Temporary Concert Hall</td>
<td>Rome - Italy</td>
<td>Culture</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Office Space Interior Design - New Seat of the Lombardy Regional Government </td>
<td>Milan - Italy</td>
<td>Office</td>
<td>Tender Competition (design/bid/build)</td>
</tr>
<tr>
<td>2005</td>
<td>Europan 8 - Urban Requalification</td>
<td>Istanbul - Turkey</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Natural Park Visitor Center, Kindergarten and Primary School</td>
<td>Funes - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Coastal Area Development</td>
<td>Latina - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Requalification of Three Squares</td>
<td>Benevento - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Office and Data Center New Building in the Ministry of Defense headquarters</td>
<td>Rome - Italy</td>
<td>Office</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2004</td>
<td>JCD Floating Pearl Store</td>
<td>Tokio - Japan</td>
<td>Retail</td>
<td>Competition / 2nd phase selected </td>
</tr>
<tr>
<td> </td>
<td>Requalifications of Rome�s Beachfront and Coastal Areas</td>
<td>Ostia - Italy</td>
<td>Urban planning</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>40 Apartments Building and Sport Center</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>nMBA New Beaux-Art Museum</td>
<td>Lausanne - Switzerland</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>The Dubai Residence and Hotel Towers</td>
<td>Dubai - UAE</td>
<td>Mixed use</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Shoes and Accessories Shop</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td>2003</td>
<td>Pedestrian and cycling Bridge </td>
<td>Rome - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Temporary Pavillion for a Car Show</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Belvedere Tower</td>
<td>Castellammare di Stabia - Italy</td>
<td>Infrastructure</td>
<td>Concept Design</td>
</tr>
</tbody>
</table>
</div>
</div>
<!-- end .container --></div>
</body>
</html>#apDiv2 {
position: absolute;
width: 698px;
height: 299px;
z-index: 1;
left:50px;
top: 117px;
overflow: scroll;
Don't forget to fix your code errors. You're still missing a <body> tag in your markup.
Nancy O. -
The incident starts after all the members are removed from the DCS Stack DefaultCoreGroup view and added back again by WebSphere Application Server. Following exceptions are seen after LiveCycle was added back in again to the view.
We have a clustered environment with two nodes 2A and 2B. Server 2A crashed and therefore all members on 2B node were removed from the DCS view. Later the new core group view was installed but LiveCycle did resume operations as expected.
Errors below:
Exception caught while dealing with cache : Action - Get, ObjectType - UM_CLUSTER_INVALIDATION_CACHE, Exception message - Error accessing the cache container - Error on GET action for cache Replicated:UM_CLUSTER_INVALIDATION_CACHE
ServiceRegist W Cache get failed for service EncryptionService Reason: Error accessing the cache container - Error on GET action for cache
Error accessing the cache container - Error on GET action for cache Local:SERVICE_FACTORY_CACHE
The following message appeared for several different services:
Cache put failed for service [CredentialService, ReaderExtensionsService,EncryptionService, etc]
SSOSessionCle W Error in cleaning stale sessions from the database. These sessions would be deleted in next trigger
java.lang.RuntimeException: com.adobe.livecycle.cache.CacheActionException: Error accessing the cache container - Error on ENTRYSET action for cache Local:UM_ASSERTION_CACHE
at com.adobe.idp.um.businesslogic.authentication.AssertionCacheManager.removeExpiredResults( AssertionCacheManager.java:125)
at com.adobe.idp.um.scheduler.SSOSessionCleanupJob.execute(SSOSessionCleanupJob.java:69)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: com.adobe.livecycle.cache.CacheActionException: Error accessing the cache container - Error on ENTRYSET action for cache Local:UM_ASSERTION_CACHE
at com.adobe.livecycle.cache.adapter.GemfireLocalCacheAdapter.entrySet(GemfireLocalCacheAdap ter.java:219)
at com.adobe.idp.um.businesslogic.authentication.AssertionCacheManager.removeExpiredResults( AssertionCacheManager.java:99)
... 3 more
Caused by: com.gemstone.gemfire.distributed.DistributedSystemDisconnectedException: GemFire on 2B<v1>:9057/51073 started at Sun Aug 17 08:57:23 EDT 2014: Message distribution has terminated, caused by com.gemstone.gemfire.ForcedDisconnectException: This member has been forced out of the distributed system. Reason='this member is no longer in the view but is initiating connections'
at com.gemstone.gemfire.distributed.internal.DistributionManager$Stopper.generateCancelledEx ception(DistributionManager.java:746)
at com.gemstone.gemfire.distributed.internal.InternalDistributedSystem$Stopper.generateCance lledException(InternalDistributedSystem.java:846)
at com.gemstone.gemfire.internal.cache.GemFireCacheImpl$Stopper.generateCancelledException(G emFireCacheImpl.java:1090)
at com.gemstone.gemfire.CancelCriterion.checkCancelInProgress(CancelCriterion.java:59)
at com.gemstone.gemfire.internal.cache.LocalRegion.checkRegionDestroyed(LocalRegion.java:669 4)
at com.gemstone.gemfire.internal.cache.LocalRegion.checkReadiness(LocalRegion.java:2587)
at com.gemstone.gemfire.internal.cache.LocalRegion.entries(LocalRegion.java:1815)
at com.gemstone.gemfire.internal.cache.LocalRegion.entrySet(LocalRegion.java:7941)
at com.adobe.livecycle.cache.adapter.GemfireLocalCacheAdapter.entrySet(GemfireLocalCacheAdap ter.java:209)
... 4 more
Caused by: com.gemstone.gemfire.ForcedDisconnectException: This member has been forced out of the distributed system. Reason='this member is no longer in the view but is initiating connections'
at com.gemstone.org.jgroups.protocols.pbcast.ParticipantGmsImpl.handleLeaveResponse(Particip antGmsImpl.java:106)
at com.gemstone.org.jgroups.protocols.pbcast.GMS.up(GMS.java:1289)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.VIEW_SYNC.up(VIEW_SYNC.java:202)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.pbcast.STABLE.up(STABLE.java:276)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.UNICAST.up(UNICAST.java:294)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.pbcast.NAKACK.up(NAKACK.java:625)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.VERIFY_SUSPECT.up(VERIFY_SUSPECT.java:187)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.FD_SOCK.up(FD_SOCK.java:504)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.FD.up(FD.java:438)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.Discovery.up(Discovery.java:258)
at com.gemstone.org.jgroups.stack.Protocol.passUp(Protocol.java:767)
at com.gemstone.org.jgroups.protocols.TP.handleIncomingMessage(TP.java:1110)
at com.gemstone.org.jgroups.protocols.TP.handleIncomingPacket(TP.java:1016)
at com.gemstone.org.jgroups.protocols.TP.receive(TP.java:923)
at com.gemstone.org.jgroups.protocols.UDP$UcastReceiver.run(UDP.java:1320)
at java.lang.Thread.run(Thread.java:773)
[22/08/14 0:28:10:237 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:29:10:252 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:30:10:268 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:31:10:283 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:32:10:298 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:33:10:313 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:34:10:328 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:35:10:343 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:36:10:358 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:37:10:373 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerException
[22/08/14 0:38:10:389 EDT] 00000b4f WorkPolicyEva W Exception thrown in background thread. Cause: java.lang.NullPointerExceptionor
I have tried looking for the root cause about why LiveCycle was not able to resume normally, didn't find anything related.LiveCycle uses Gemfire as distributed cache for cluster members. If you are using TCP Locators (caching based on TCP instead of UDP), below are the possible situations which might lead to “ForcedDisconnectException” :
- There is time difference between two nodes.
- These is network connectivity issues.
- The high CPU usage by the member crashed.
-Wasil -
Hi, I received an email with the link to download the new version of flash player for distribution, but does not work
Dear Miguel Ángel Abarca,
Thank you for submitting a request to distribute Adobe® Software. Your request has been approved, and you may now distribute the Adobe® Software listed below, subject to the terms and conditions set forth in the Adobe Reader and Runtime Software Distribution License Agreement.
Approved Software:
Adobe® Flash® Player
Adobe® Reader® Software
Attached is an Adobe Portable Document Format (PDF) file of the distribution license agreement. Please keep this file for your records. The agreement is valid for one year, after that one year you can renew the distribution license agreement by following the same process.
Below you will find the necessary details and download links for the product(s) that you have been approved.
Adobe® Flash® Player
To download the Flash Player version that you would like to distribute, please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=<number>Hello, here paste part of message:
To download the Flash Player version that you would like to distribute,
please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=4358bc39-5e77-4893-99cf- 9f7c7a8d5456
*You may not share the above link, share information with others, or
publish the above link on websites, blogs, or by any other means that
can be publicly accessed. The information contained on this site is
meant for your use only in accordance with Adobe Flash Player
Distribution License Agreement you accepted. You may direct others to
http://www.adobe.com/products/players/fpsh_distribution1.html to request
distribution rights.
El 13/01/2015 a las 17:53, m_vargas escribió:
>
Link error for distribution
created by m_vargas <https://forums.adobe.com/people/m_vargas> in
/Installing Flash Player/ - View the full discussion
<https://forums.adobe.com/message/7091835#7091835> -
Hi Chris
There are so many IX and S locks when i run ttxactadmin as below, and there are error 6003 in the tterrors.log. I am not sure how it comes and how i can do to avoid so many locks (IX,S), as the locks seem to lead to the poor performance.
Regards
Li
[timesten@policies info]$ ttxactadmin tt_1122
2014-06-10 19:39:59.124
/opt/TimesTen/tt1122/info/TT_1122
TimesTen Release 11.2.2.6.0
Outstanding locks
PID Context TransID TransStatus Resource ResourceID Mode SqlCmdID Name
Program File Name: ttcserver
Client: zhanglei01 (192.168.3.97) PID: 652 ConnId: 3
13193 0x122141e0 3.6218256 Active Database 0x01312d0001312d00 IX 0
Command 63070070280 S 63070070280
Command 63070088488 S 63070088488
Program File Name: java
22898 0x2abb70744190 68.192079 Active Database 0x01312d0001312d00 IX 0
Command 63135962640 S 63135962640
0x2abb740a8fd0 26.332773 Active Database 0x01312d0001312d00 IX 0
Command 63135962640 S 63135962640
Program File Name: java
27257 0x1ee88010 28.61798 Active Database 0x01312d0001312d00 IX 0
0x1efabdc0 14.135708 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x1f234d60 20.212847 Active Database 0x01312d0001312d00 IX 0
0x1f3c4d20 69.61019 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x1f42bb50 61.55575 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x1f520090 18.144761 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x1f75fd50 40.54027 Active Database 0x01312d0001312d00 IX 0
0x1f802700 32.60926 Active Database 0x01312d0001312d00 IX 0
0x1f96ee00 13.133386 Active Database 0x01312d0001312d00 IX 0
0x1fa97510 23.66043 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x1fab74a0 15.263987 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x1fb13ee0 62.58715 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x1fbe70b0 22.54699 Active Database 0x01312d0001312d00 IX 0
0x1fd67b80 70.58108 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x1fe5a1e0 108.19195 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x20569c50 83.48231 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x206c74d0 88.44535 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x20795c60 94.135147 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2aaab80fbfe0 82.51766 Active Database 0x01312d0001312d00 IX 0
0x2aaab8198070 39.66183 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2aaac85cb210 4.4862402 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2aaac8a79070 5.4231353 Active Database 0x01312d0001312d00 IX 0
0x2aaac8ade2b0 6.2251763 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2aaac8b4f630 7.1958134 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2aaac8bd1360 8.2970264 Active Database 0x01312d0001312d00 IX 0
0x2aaac8c53090 9.948962 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2aaac8cd4dc0 10.4442556 Active Database 0x01312d0001312d00 IX 0
0x2aaac8d56af0 11.3089531 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2aaac8dd8820 12.3377348 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb7001aca0 16.1092282 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb700983f0 17.216793 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2abb700fd630 19.546665 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb701dd740 27.62472 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2abb70287980 54.131520 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb703267b0 100.161812 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb703a0ce0 114.18564 Active Database 0x01312d0001312d00 IX 0
0x2abb780393a0 29.61830 Active Database 0x01312d0001312d00 IX 0
0x2abb7807f6b0 33.69272 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2abb7811cd40 46.59031 Active Database 0x01312d0001312d00 IX 0
0x2abb78131930 47.57511 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb781e5d40 86.49723 Active Database 0x01312d0001312d00 IX 0
0x2abb782149f0 37.60371 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb782be9e0 106.16739 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb7c0dd800 34.59934 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2abb7c1717b0 43.58632 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb7c1b69d0 50.48246 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb7c2c7290 99.77142 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb800f7ce0 42.58233 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb8014ca40 49.45579 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2abb801ef220 55.53388 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb802db740 101.205712 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb84016810 30.59694 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2abb8403ba10 31.61627 Active Database 0x01312d0001312d00 IX 0
0x2abb840a7710 35.49096 Active Database 0x01312d0001312d00 IX 0
Command 63078042632 S 63078042632
0x2abb84171bd0 41.62948 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb841c9480 45.62825 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb8428d650 48.59628 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb843a5730 76.60185 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb843d2c10 80.47384 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb844890e0 95.158977 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb844ebcb0 113.17537 Active Database 0x01312d0001312d00 IX 0
0x2abb88069430 36.68769 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb880e7110 38.55534 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb88183df0 44.54232 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb8820d230 53.29378 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb88261e60 51.59713 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb882b6a90 52.60489 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb882fb6b0 56.59902 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb8835e750 64.56058 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb883f4b80 72.56333 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb884b2090 98.70919 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
0x2abb885172d0 102.88736 Active Database 0x01312d0001312d00 IX 0
Command 62926043208 S 62926043208
[timesten@policies logs]$ tail -50 tterrors.log
18:56:23.96 Warn: : 3644: 3648/0x41bae200: sbOLUndoByConn: oplog stack for connid 21 (java) pid 23180: <none>
18:56:23.96 Warn: : 3644: 3648/0x444a9200: sbOLUndoByConn: oplog stack for connid 130 (java) pid 23180: <none>
18:56:23.96 Warn: : 3644: 3648/0x46acf200: sbOLUndoByConn: oplog stack for connid 172 (java) pid 23180: <none>
18:56:23.96 Warn: : 3644: 3648/0x44cb1200: sbOLUndoByConn: oplog stack for connid 140 (java) pid 23180: <none>
18:56:23.96 Warn: : 3644: 3648/0x44db2200: sbOLUndoByConn: oplog stack for connid 141 (java) pid 23180: <none>
18:56:23.96 Warn: : 3644: 3648/0x44eb3200: sbOLUndoByConn: oplog stack for connid 142 (java) pid 23180: <none>
18:56:23.96 Warn: : 3644: 3648/0x4359a200: sbOLUndoByConn: oplog stack for connid 111 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x446ab200: sbOLUndoByConn: oplog stack for connid 133 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x452b7200: sbOLUndoByConn: oplog stack for connid 146 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x44fb4200: sbOLUndoByConn: oplog stack for connid 143 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x42287200: sbOLUndoByConn: oplog stack for connid 14 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x453b8200: sbOLUndoByConn: oplog stack for connid 147 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x455ba200: sbOLUndoByConn: oplog stack for connid 149 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x454b9200: sbOLUndoByConn: oplog stack for connid 148 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x456bb200: sbOLUndoByConn: oplog stack for connid 150 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x458bd200: sbOLUndoByConn: oplog stack for connid 152 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x459be200: sbOLUndoByConn: oplog stack for connid 153 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x45bc0200: sbOLUndoByConn: oplog stack for connid 155 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x45abf200: sbOLUndoByConn: oplog stack for connid 154 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x460c5200: sbOLUndoByConn: oplog stack for connid 161 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x463c8200: sbOLUndoByConn: oplog stack for connid 164 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x472d7200: sbOLUndoByConn: oplog stack for connid 181 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x464c9200: sbOLUndoByConn: oplog stack for connid 165 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x462c7200: sbOLUndoByConn: oplog stack for connid 163 (java) pid 23180: <none>
18:56:23.97 Warn: : 3644: 3648/0x4288d200: sbOLUndoByConn: oplog stack for connid 96 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x461c6200: sbOLUndoByConn: oplog stack for connid 162 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x45dc2200: sbOLUndoByConn: oplog stack for connid 157 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x45fc4200: sbOLUndoByConn: oplog stack for connid 160 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x467cc200: sbOLUndoByConn: oplog stack for connid 169 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x442a7200: sbOLUndoByConn: oplog stack for connid 128 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x468cd200: sbOLUndoByConn: oplog stack for connid 170 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x44aaf200: sbOLUndoByConn: oplog stack for connid 138 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x44bb0200: sbOLUndoByConn: oplog stack for connid 139 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x447ac200: sbOLUndoByConn: oplog stack for connid 134 (java) pid 23180: <none>
18:56:23.98 Warn: : 3644: 3648/0x46cd1200: sbOLUndoByConn: oplog stack for connid 174 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x46ed3200: sbOLUndoByConn: oplog stack for connid 177 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x46fd4200: sbOLUndoByConn: oplog stack for connid 178 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x46dd2200: sbOLUndoByConn: oplog stack for connid 175 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x46bd0200: sbOLUndoByConn: oplog stack for connid 173 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x470d5200: sbOLUndoByConn: oplog stack for connid 179 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x471d6200: sbOLUndoByConn: oplog stack for connid 180 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x40573250: sbOLUndoByConn: oplog stack for connid 186 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x476db200: sbOLUndoByConn: oplog stack for connid 185 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x475da200: sbOLUndoByConn: oplog stack for connid 184 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x473d8200: sbOLUndoByConn: oplog stack for connid 182 (java) pid 23180: <none>
18:56:23.99 Warn: : 3644: 3648/0x474d9200: sbOLUndoByConn: oplog stack for connid 183 (java) pid 23180: <none>
18:56:24.00 Warn: : 3644: 3648/0x45ec3200: sbOLUndoByConn: oplog stack for connid 158 (java) pid 23180: <none>
19:06:41.64 Warn: : 3644: 3718/0x1570ca20: sbLogBufGCLockENQNoErr: The commit is performed without the benefit of group commit optimization (error 6003)
19:15:41.69 Warn: : 3644: 3718/0x1570ca20: sbLogBufGCLockENQNoErr: The commit is performed without the benefit of group commit optimization (error 6003)
19:32:41.67 Warn: : 3644: 3718/0x1570ca20: sbLogBufGCLockENQNoErr: The commit is performed without the benefit of group commit optimization (error 6003)Hi Chris
Thanks for your kind reply! It is very helpful to look into the problems and find some better resolutions.
I simply kill the PID associated to LOCKS, I cann't but have to kill the PID accossiated to the lock cause they really degrade the performance.
"When you get a 6003 lock timeout error in the application, the associated error text contains a great deal of information; what is the error text for the errors that you are seeing? That should help you determine where the real lock contention lies. If your application does not report/log that text then it needs to do so..."
---you mean the error text in the JAVA application or in TT?
Here is the TT configuration, most of attributes are set by default.
[timesten@policies info]$ cat sys.odbc.ini
[ODBC Data Sources]
TT_1122=TimesTen 11.2.2 Driver
[TT_1122]
Driver=/opt/TimesTen/tt1122/lib/libtten.so
DataStore=/opt/TimesTen/tt1122/info/TT_1122
DatabaseCharacterSet=ZHS16GBK
ConnectionCharacterSet=ZHS16GBK
PermSize=60000
TempSize=8000
OracleNetServiceName=vedb
Connections=300
[ODBC Data Sources]
tt_1122_c=TimesTen 11.2.2 Client Driver
[tt_1122_c]
TTC_SERVER=tt_1122_c_s
TTC_SERVER_DSN=tt_1122
[timesten@policies info]$ ttisql "dsn=tt_1122;uid=cacheuser;pwd=timesten;oraclepwd=oracle";
Copyright (c) 1996, 2013, Oracle and/or its affiliates. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
connect "dsn=tt_1122;uid=cacheuser;pwd=timesten;oraclepwd=oracle";
Connection successful: DSN=TT_1122;UID=cacheuser;DataStore=/opt/TimesTen/tt1122/info/TT_1122;DatabaseCharacterSet=ZHS16GBK;ConnectionCharacterSet=ZHS16GBK;DRIVER=/opt/TimesTen/tt1122/lib/libtten.so;PermSize=60000;TempSize=8000;Connections=300;TypeMode=0;OracleNetServiceName=vedb;
(Default setting AutoCommit=1)
Command> call ttConfiguration;
< CacheAwtMethod, 1 >
< CacheAwtParallelism, 1 >
< CacheGridEnable, 1 >
< CacheGridMsgWait, 60 >
< CkptFrequency, 600 >
< CkptLogVolume, 0 >
< CkptRate, 0 >
< CommitBufferSizeMax, 0 >
< ConnectionCharacterSet, ZHS16GBK >
< ConnectionName, tt_1122 >
< Connections, 300 >
< DDLCommitBehavior, 0 >
< DDLReplicationAction, INCLUDE >
< DDLReplicationLevel, 2 >
< DataBaseCharacterSet, ZHS16GBK >
< DataStore, /opt/TimesTen/tt1122/info/TT_1122 >
< DynamicLoadEnable, 1 >
< DuplicateBindMode, 0 >
< DurableCommits, 0 >
< DynamicLoadErrorMode, 0 >
< Isolation, 1 >
< RangeIndexType, 1 >
< LockLevel, 0 >
< LockWait, 10 >
< LogAutoTruncate, 1 >
< LogBufMB, 64 >
< LogBufParallelism, 4 >
< LogDir, /opt/TimesTen/tt1122/info/ >
< LogFileSize, 64 >
< LogFlushMethod, 1 >
< LogPurge, 1 >
< Logging, 1 >
< MemoryLock, 0 >
< NLS_LENGTH_SEMANTICS, BYTE >
< NLS_NCHAR_CONV_EXCP, 0 >
< NLS_SORT, BINARY >
< OracleNetServiceName, vedb >
< PLSCOPE_SETTINGS, IDENTIFIERS:NONE >
< PLSQL, 1 >
< PLSQL_CCFLAGS, <NULL> >
< PLSQL_CODE_TYPE, INTERPRETED >
< PLSQL_CONN_MEM_LIMIT, 100 >
< PLSQL_MEMORY_ADDRESS, 0x0000007fa0000000 >
< PLSQL_MEMORY_SIZE, 32 >
< PLSQL_OPTIMIZE_LEVEL, 2 >
< PLSQL_TIMEOUT, 30 >
< PassThrough, 0 >
< PermSize, 60000 >
< PermWarnThreshold, 90 >
< Preallocate, 0 >
< PrivateCommands, 0 >
< QueryThreshold, 0 >
< RACCallback, 1 >
< ReceiverThreads, 1 >
< RecoveryThreads, 1 >
< ReplicationApplyOrdering, 0 >
< ReplicationParallelism, 1 >
< ReplicationParallelismBufferMB, 64 >
< ReplicationTrack, -1 >
< SQLQueryTimeout, 0 >
< TempSize, 8000 >
< TempWarnThreshold, 90 >
< Temporary, 0 >
< TypeMode, 0 >
< UID, CACHEUSER >
65 rows found.
Command>
Regards
Li -
SQL Timeouts and Blocking Locks
SQL Timeouts and Blocking Locks
Just wanted to check in and see if anyone here has feedback on application settings, ColdFusion settings, JBOSS settings or other settings that could help to limit or remove SQL Timeouts and blocking locks on SID's.
We're using MS SQL 2000 with JBOSS and IIS5.
We've been seeing the following error in our logs that starts blocking locks in SQL:
java.sql.SQLException: [newScale] [SQLServer JDBC Drive] [SQLServer] Lock request time out period exceeded.
Once this happens, we're hosed until we remove the blocking SID in SQL. These are the connections to the application.
Any feedback would be great. Thanks!Hi
This is your exact solution:
Select a.username, a.sid, a.serial#, b.id1, c.sql_text
From v$session a, v$lock b, v$sqltext c
Where b.id1 in( Select distinct e.id1
from v$session d , v$lock e
where d.lockwait = e.kaddr ) and
a.sid = b.sid and
c.hash_value = a.sql_hash_value and
b.request =0;
Thanks
Sarju
Oracle DBA
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by I'm clueless:
Can someone give me the SQL statement to
show if there are any blocking database locks and if so - which user is locking the Database?
Thanks in Advance<HR></BLOCKQUOTE>
null -
Itunes encounters an error and closes when I try to sync pictures
When I try to sync pictures to my itouch itunes encounters an error and shuts down. I have the itouch attached to the computer and my settings are to get pictures from file folder. I have done all the updates and have searched the support discussions for some ideas, but have had no lock. All the software is current. Any help would be greatly appriecated.
itunes encounters an error and shuts down.
That would be an unusual error message to be getting if you were having a problem with a photo cache ... but just in case ...
Try deleting your iTunes photo cache, as per the following document:
Photo Sync creates iPod photo Cache
... can you get a photo sync to go through without the crash after that?
Maybe you are looking for
-
I see others are having the same problems, I am not getting email on my iphone 4 or ipad2...stopped about 4 days ago. I have added the 8.8.8.8 and many of the other suggestions, nothing works. Please help me.
-
My i tunes wont delete older version to download newer version
my i tunes downloads new version 3/4 of the way then says it cant delete older version. Someone please help
-
Anyone else not received the promo vouchers BT pro...
When I switched to BT in feb I did so because they were giving a £75 Dabs.com voucher for new customers who set up online. I went through the whole process with an online chat assistant who assured me I would receive the voucher 10-15 days after my 1
-
Just picked up a new computer which has a lot more RAM than my old computer bu I keep getting low memory errors. Never had this issue on my old computer, any ideas?
-
How do I reset / refresh slide elements on enter in Captivate 6?
I have a Captivate 6 movie that has a number of user-triggered advanced actions in the form of case studies / character scenarios. These interactions enable learners to watch displayed information, answer questions and recieve feedback. I need these