Content area

Hi experts
I have one problem.When i entered into portals and in "Content Area " it is frequently showing <b>"content Area"</b> mouse over text. How to avoid this.
Thanks

Unfortunately you cannot remove this. This is done by the content area iview and is put into the HTML output. The only method to remove this is to create your own version of the content area iview, however, you need to make sure that ALL functionality that is available in this iview is also available in your own iview.
I don't believe, looking at the code, that this can be turned off by configuration
Darrell

Similar Messages

How to pass variable to content area from a PL/SQL procedure

Hi,
Can somebody tell me how to create a(Content area) folder based on a PL/SQL procedure that takes a variable as a
parameter and returns data based on value of that parameter to the folder . Any help would be appreciated .
Thanks and regards.
Neeti.

Somewhere, in one procedure, build a session identifier and save your variable there. If no session with that identifier is previously stored, it will create a new session instance with that ID for you.
declare
l_sess portal30.wwsto_api_session;
varvalue number;
begin
varvalue := 100;
l_sess := portal30.wwsto_api_session.load_session('MYSESSION','VARIABLES');
l_sess.set_attribute('VAR_NAME',varvalue);
l_sess.save_session;
end;
In your other procedure, or anywhere else needed within that same session, simply load the session and reference the variable. To reference the variable, use the following.
-- assuming new procedure, so re-defining session variable and reloading session into it
declare
my_session portal30.wwsto_api_session;
my_new_variable number;
begin
my_session := portal30.wwsto_api_session.load_session('MYSESSION','VARIABLES');
my_new_variable := my_session.get_attribute_as_number('VAR_NAME');
end;
This will let you reference parameters across multiple portal applications and indirect calls.

Sub folders content are not getting displayed using KM Navigation iView.

Subfolder contents are not being displayed for KM Nvaigation ivew
Posted: Feb 15, 2006 1:01 PM Reply E-mail this post
Hi
I created CM repository and did all settings.i could able to see the folder and subfolder contents under Content administration>KMContent>root-->KMPublications(my own folder).
-->using Administrator user i could able to see all folders/subfolders correctly and could able to edit.
-->now i created KMNavigation iview and created new role called "KMRole".then i assigned iview to page,then page to Role .this "KMRole" is assigned to user called "prasad".
>for folder "KMPublications" ,using context menu Details>settings-->permissions ,i added "KMRole" for "Read" only.
-->when i logon to portal with user "prasad" ,it is showing all root directory content and subfolders.when i click on subfolder called "foods",it is showing me exception.this problem is not coming if i logon as "Administrator".can anybody helpme out.
Note:if i chnage the Path to display value to subfolder ,it is only displaying subfolders content only.if i click on its subdirectory ,it is giving null pointer exception.
i checked default trace file,it is giving following information
#1.5#001560AB529E0068000001130000050000040CDA8CF94AE8#1140032714402#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#sriram#586##epdev1.corporate_EPD_4605550#sriram#8ba54e509e5b11da9930001560ab529e#Thread[PRT-Async 0,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:02:45_15/02/06_0007_4605550
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/KMEx/KMRole/KMExPage/KMNavigationiView
Component class : com.sapportals.wcm.portal.component.base.ControllerComponent
User : sriram
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Exception during PageProcessorComponent.doContent()
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:139)
at com.sapportals.wcm.portal.component.base.ControllerComponent.doContent(ControllerComponent.java:73)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 7 more
Caused by: com.sapportals.htmlb.page.PageException: null (java.lang.NullPointerException)
at com.sapportals.wcm.app.controller.ControllerDynPage.doProcessBeforeOutput(ControllerDynPage.java:81)
at com.sapportals.wcm.portal.component.base.KMControllerDynPage.doProcessBeforeOutput(KMControllerDynPage.java:56)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
... 11 more
#1.5#001560AB529E006D0000001C0000050000040CDA8E1777DD#1140032733168#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#sap.com/irj#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#Guest#192####b0827ab09e5911da8591001560ab529e#Thread[Thread-108,5,PRT-Async]##0#0#Warning##Plain###Exception reading project list. Error was Cannot get item /etc/xmlforms/XFBuilderConfig/ProjectsTimestamps.pref#
#1.5#001560AB529E006D0000001D0000050000040CDA8E17786B#1140032733168#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#sap.com/irj#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#Guest#192####b0827ab09e5911da8591001560ab529e#Thread[Thread-108,5,PRT-Async]##0#0#Warning##Plain###com.sapportals.wcm.repository.InvalidUriException#
#1.5#001560AB529E006D0000001E0000050000040CDA91E8084B#1140032797168#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#sap.com/irj#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#Guest#192####b0827ab09e5911da8591001560ab529e#Thread[Thread-108,5,PRT-Async]##0#0#Warning##Plain###Exception reading project list. Error was Cannot get item /etc/xmlforms/XFBuilderConfig/ProjectsTimestamps.pref#
#1.5#001560AB529E006D0000001F0000050000040CDA91E808D9#1140032797168#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#sap.com/irj#com.sapportals.wcm.service.xmlforms.project.ProjectListResourceHandler#Guest#192####b0827ab09e5911da8591001560ab529e#Thread[Thread-108,5,PRT-Async]##0#0#Warning##Plain###com.sapportals.wcm.repository.InvalidUriException#
can anybody help
prasad
Prasad

Maybe there is approval set up on this folder. Order time based publishing. Both can cause the read users to see nothing.
The first means that read users can only see published documents. If no document is published the result is a empty folder.
Same for the second feature. If timebased publishing it can be that all documents are hidden for the read users because the documents are out of there time interval.
Hope this helps. Check both in folder > details > settings.
Frederik

How to enlarge and centralise the 'Content Area' in an Office 365 webpage

Hi, I'm relatively new to O365 and I'm working on our webpage
The issue I have is that you have the Content Area but that seems to be about 1/2 an inch in from the left hand screen and only covers approx. 75% of the screen, what I want is the content area to be about 1000pixels wide and centralised.
I've tried looking at the CSS style sheet but there doesn't seem to be anything that helps me to do either of the above tasks.
Any help would greatly be appreciated, thanks.
Jason

Hi Jay Dog,
This questions is definitely not about Office client, if you are customizing your own website, I suggest you post the question in Office 365 Community to get specific support:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Portal Content area not displaying in Portal

I tried to disable Portal favorites option from Content admin -> Default Frame work Page -> Detailed navigation. Instead of only disabling the default navigation I have disabled the entire Portal content area and I am now not able to see any content in the Portal except the masthead area and the Top level navigation.
Can any one please help me on this.
Thanks.

Hi,
Check the content area iview in the Desktop inner page in framework page.If this iview is not there then it will not show the content area.
If desktop inner page is deeted then also you will not see the content area.
If so please add the content area iview indside the Desktop inner page then you can see the content area for the users.
Content area iview will be available under the following path of the portal
Content Administration > Portal Content > Content provided by sap > Admin Interfaces > Admin Iview Templates > Content Area (view).
Thanks,
Regards,
Rudradev Devulaplli

Images present in datagridview not exporting to file only text contents are generating into PDF file..

Hi Everyone,
I have created simple Desktop app in that I trying to generate PDF file from Datagridview...when I click on ExportPDf button Pdf file is generation successfully but the issue is in that pdf whatever the images has present in datagridview that images
are not generation into PDF only the text contents are Present in PDF file.
Does any one can tell me how to generate the PDF file along with images.
Here is my code:
private void btnexportPDF_Click(object sender, EventArgs e)
int ApplicationNameSize = 15;
int datesize = 12;
Document document = null;
try
SaveFileDialog savefiledg = new SaveFileDialog();
savefiledg.Filter = "All Files | *.* ";
if (savefiledg.ShowDialog() == DialogResult.OK)
string path = savefiledg.FileName;
document = new Document(PageSize.A4, 3, 3, 10, 5);
PdfWriter writer = PdfWriter.GetInstance(document, new FileStream(path + ".pdf", FileMode.Create));
document.Open();
// Creates a phrase to hold the application name at the left hand side of the header.
Phrase phApplicationName = new Phrase("Sri Lakshmi Finance,Hosur-560068", FontFactory.GetFont("Arial", ApplicationNameSize, iTextSharp.text.Font.NORMAL));
// Creates a phrase to show the current date at the right hand side of the header.
Phrase phDate = new Phrase(DateTime.Now.ToLongDateString(), FontFactory.GetFont("Arial", datesize, iTextSharp.text.Font.NORMAL));
document.Add(phApplicationName);
document.Add(phDate);
iTextSharp.text.Image img = iTextSharp.text.Image.GetInstance("D:\\logo.JPG");
document.Add(img);
iTextSharp.text.Font font5= iTextSharp.text.FontFactory.GetFont(FontFactory.TIMES_ROMAN, 5);
iTextSharp.text.Font font6 = iTextSharp.text.FontFactory.GetFont(FontFactory.HELVETICA_BOLD, 6);
//float[] columnDefinitionSize = { 2.5f, 7.0f,6.6f, 8.6f, 6.6f, 5.0f, 4.5f, 7.0f, 6.3f, 7.0f, 3.5f, 6.0f, };
PdfPTable table = null;
table = new PdfPTable(dataGridView1.Columns.Count);
table.WidthPercentage = 100;
PdfPCell cell = null;
foreach (DataGridViewColumn c in dataGridView1.Columns)
cell = new PdfPCell(new Phrase(new Chunk(c.HeaderText,font6)));
cell.HorizontalAlignment = PdfPCell.ALIGN_CENTER;
cell.VerticalAlignment = PdfPCell.ALIGN_CENTER;
cell.BackgroundColor = new iTextSharp.text.BaseColor(240, 240, 240);
table.AddCell(cell);
if (dataGridView1.Rows.Count > 0)
for (int i = 0; i < dataGridView1.Rows.Count; i++)
PdfPCell[] objcell = new PdfPCell[dataGridView1.Columns.Count];
for (int j = 0; j < dataGridView1.Columns.Count - 0; j++)
cell = new PdfPCell(new Phrase(dataGridView1.Rows[i].Cells[j].Value.ToString(), font5));
cell.HorizontalAlignment = PdfPCell.ALIGN_LEFT;
cell.VerticalAlignment = PdfPCell.ALIGN_LEFT;
cell.Padding = PdfPCell.ALIGN_LEFT;
objcell[j] = cell;
PdfPRow newrow = new PdfPRow(objcell);
table.Rows.Add(newrow);
document.Add(table);
MessageBox.Show("PDF Generated Successfully");
document.Close();
else
//Error
catch (FileLoadException fle)
MessageBox.Show(fle.Message);
MessageBox.Show("Error in PDF Generation", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
Runtime Gridview content:
Generated PDF File:
Thanks & Regards RAJENDRAN M

Hi Everyone,
I have created simple Desktop app in that I trying to generate PDF file from Datagridview...when I click on ExportPDf button Pdf file is generation successfully but the issue is in that pdf whatever the images has present in datagridview that images
are not generation into PDF only the text contents are Present in PDF file.
Does any one can tell me how to generate the PDF file along with images.
Here is my code:
private void btnexportPDF_Click(object sender, EventArgs e)
int ApplicationNameSize = 15;
int datesize = 12;
Document document = null;
try
SaveFileDialog savefiledg = new SaveFileDialog();
savefiledg.Filter = "All Files | *.* ";
if (savefiledg.ShowDialog() == DialogResult.OK)
string path = savefiledg.FileName;
document = new Document(PageSize.A4, 3, 3, 10, 5);
PdfWriter writer = PdfWriter.GetInstance(document, new FileStream(path + ".pdf", FileMode.Create));
document.Open();
// Creates a phrase to hold the application name at the left hand side of the header.
Phrase phApplicationName = new Phrase("Sri Lakshmi Finance,Hosur-560068", FontFactory.GetFont("Arial", ApplicationNameSize, iTextSharp.text.Font.NORMAL));
// Creates a phrase to show the current date at the right hand side of the header.
Phrase phDate = new Phrase(DateTime.Now.ToLongDateString(), FontFactory.GetFont("Arial", datesize, iTextSharp.text.Font.NORMAL));
document.Add(phApplicationName);
document.Add(phDate);
iTextSharp.text.Image img = iTextSharp.text.Image.GetInstance("D:\\logo.JPG");
document.Add(img);
iTextSharp.text.Font font5= iTextSharp.text.FontFactory.GetFont(FontFactory.TIMES_ROMAN, 5);
iTextSharp.text.Font font6 = iTextSharp.text.FontFactory.GetFont(FontFactory.HELVETICA_BOLD, 6);
//float[] columnDefinitionSize = { 2.5f, 7.0f,6.6f, 8.6f, 6.6f, 5.0f, 4.5f, 7.0f, 6.3f, 7.0f, 3.5f, 6.0f, };
PdfPTable table = null;
table = new PdfPTable(dataGridView1.Columns.Count);
table.WidthPercentage = 100;
PdfPCell cell = null;
foreach (DataGridViewColumn c in dataGridView1.Columns)
cell = new PdfPCell(new Phrase(new Chunk(c.HeaderText,font6)));
cell.HorizontalAlignment = PdfPCell.ALIGN_CENTER;
cell.VerticalAlignment = PdfPCell.ALIGN_CENTER;
cell.BackgroundColor = new iTextSharp.text.BaseColor(240, 240, 240);
table.AddCell(cell);
if (dataGridView1.Rows.Count > 0)
for (int i = 0; i < dataGridView1.Rows.Count; i++)
PdfPCell[] objcell = new PdfPCell[dataGridView1.Columns.Count];
for (int j = 0; j < dataGridView1.Columns.Count - 0; j++)
cell = new PdfPCell(new Phrase(dataGridView1.Rows[i].Cells[j].Value.ToString(), font5));
cell.HorizontalAlignment = PdfPCell.ALIGN_LEFT;
cell.VerticalAlignment = PdfPCell.ALIGN_LEFT;
cell.Padding = PdfPCell.ALIGN_LEFT;
objcell[j] = cell;
PdfPRow newrow = new PdfPRow(objcell);
table.Rows.Add(newrow);
document.Add(table);
MessageBox.Show("PDF Generated Successfully");
document.Close();
else
//Error
catch (FileLoadException fle)
MessageBox.Show(fle.Message);
MessageBox.Show("Error in PDF Generation", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
Runtime Gridview content:
Generated PDF File:
Thanks & Regards RAJENDRAN M
Hello,
Since this issue is mainly related to iTextSharp which belongs to third-party, I would recommend you consider posting this issue on its support website to get help.
Maybe the following forum will help.
http://support.itextpdf.com/forum/26
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

UI element in Webdynpro to align the content area at the center of the page

Hi Experts,
I am looking for a UI element in webdynpro which can keep the entire content area aligned to the center of the page as well as can provide the borders along the content area.
Please suggest if there exists any such UI element in webdynpro.
P.S. We are using NWDS Version: 7.01.00
Thanks in advance for the replies.
Regards,
Anurag

Hi Anurag,
What you can try is to put all of your UI elements in Group and then do the alignment. Set the visibility property of the group header to invisible. This will give you a border.
Hope this solves your problem.
Regards
Abhinav Sharma

Display the reports under all subfolders at a time in the content area?

Hi All,
In SAP EP portal,We have a requirement to display few reports wherein we have 7 roles with the same names but different ID's and they are merged together so that even if the users have 7 roles assigned he will see only 1 tab in the first level navigation and uder that there will be one folder at the second level.Now the requirement is like this
1st level navigation : Role Name
2nd level navigation :Folder Name
Detailed Navigation : Folder Name
                                 Sub Folder Name
                                 Sub -sub folder1 Name
                                 Reports   --(one or many)
                                 Sub -sub folder2 Name
                                 Reports   --(one or many)
                                 Sub -sub folder3 Name
                                 Reports   --(one or many)
Under al the sub-sub folders a workset map iview is added to display the reports with a pictogram in the content area.In the detailed navigation, as soon as the user clicks on the Sub folder the user should be able to see the reports under all the Sub-sub folders( Sub-sub folder1,Sub-sub folder2,Sub-sub folder3) .But currently the user has to explicitly click on each of the Sub-sub folders to view the reports(thrice in this case).Plz give a solution in which all the reports under the 3 Sub-sub folders should appear simultaneouly in the content area at a single click on Sub Folder
Thanks & Regards,
Sowmya
Edited by: Sowmya B on Jan 4, 2010 2:14 PM

Resolved

Moving a folder, Linking between content areas

I have 2 problems:
1) So far we developed all our content in a single content area. We would now like to split the information into multiple content areas. The MOVE or COPY command on the folder only allows me to copy within a content area. I have hundreds of documents to move. Is there any way i can move a folder to a different content area?
2) What is the best way to link a folder from 1 content area to a folder in another content area? I found that the FOLDER LINK ITEM allows me to connect only within a content area.
(I would prefer not to use an URL since the content publishers may not be able to construct complicated paths or the paths may change leading to broken links.)

Suraj
1) The only way to do this currently is to create an export of the content area, import it back into the portal and remove the duplicate content. We are planning a bulk action feature in a future release that would allow you do to selectively copy/move one or more folders into a new content area.
2) Currently folder links are scoped within a content area; the only option is to link to the folder through a URL folder type. If you use the generated URL that contains the folder ID, you shouldn't run into any problems if the target folder is moved. I have submitted an enhancement request to extend the folder link to 'remote' folders outside of the 'home' content area.

Problem with Checking In/Out Items in Content Area

I've been reading the Portal On-Line help pages in regards to
checking in/out items. The help states that when an item is
checked out, the item is locked and a message "Checked out by:
UserName" is displayed next to the item. When I check out an
item, I do not see this "Checked out by" message. However, I do
see the checkout icon. Note - I am doing this through the
Content Area Navigation page. Is there something that I am
missing? (I have seen other threads in regards to the
checkin/checkout icons not displaying when the Content Area is
published as a portlet. We are having this problem as well.)
However, the lack of the "checked out" message happens in both
the Content Area Navigator and the published portlet.
Also, is there a way to get Portal to automatically generate
version numbers when a new version of an item is created. I see
that you can create a unique name or description .... but I'd
like to have Portal generate the version number for me. This is
done in the Application component section when you build forms,
menus, or reports.
Thank you for any assistance that you can provide.

The "checked out by" message only appears to other users - you
won't see it if you are the user who checked out the item.
The version number is planned for a future release.
Regards,
Jerry

Can't post document to Content Area

today, our production Portal abruptly stopped accepting documents in the Content Area.
when you try to post a document, it generates a HTTP 404 error on wwv_add_wizard.edititem:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
if you post(or hit 'Next >') without browsing for a file (and leaving the File Name field empty),
THEN it works, but of course only creates a useless entry listing the display name and description,
with no file link, because a file wasn't uploaded.
does anyone have any suggestions? has anyone else run into this?
unfortunately, i can't restart the database or application server during work hours...
thanks for any help,
rich

Rich,
Did you check the apache error.log ?
today, our production Portal abruptly stopped accepting documents in the Content Area.
when you try to post a document, it generates a HTTP 404 error on wwv_add_wizard.edititem:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
if you post(or hit 'Next >') without browsing for a file (and leaving the File Name field empty),
THEN it works, but of course only creates a useless entry listing the display name and description,
with no file link, because a file wasn't uploaded.
does anyone have any suggestions? has anyone else run into this?
unfortunately, i can't restart the database or application server during work hours...
thanks for any help,
rich

Document links and Tables in a content area

Hello,
1. I'm having problems with text items in a content area. I'm trying to make a link to a document in a text item but I only get a 'Page can not be found'. I know I have to change the httpd.conf file settings but so far I have not been able to set it up correctly. How should the excact line look?
In this case I whant to put all my documents in a folder tree in the 'portal_home' directory. For instense:MHC(root folder)/HR/employees.doc or MHC/Finance/Strategy.xls
2. Why is it not possible to make 'invisible tables' in a text item? This way its possible to control the text mutch more and also (as in my case) include pictures within the text. If you want to produce a nice Intranet, the only way with portal (so far) is to make text items, becurse these are the only ones that you can display directly in a folder area and keep the navigation bar to the left. This way the users wont get lost in all the pages and folders.
The problem is this:I want to use the style I've made on all my folders (this way it's easy to change the apperance of all the folders in just moments) BUT if I put a table in the text item (html code) then suddenly portal takes the default settings of the browser instead!!? So if I have set my browser to Arial 15 this is the text I se instead of the text in my style.
Please , do anyone have a suggestion?
I using Portal 3.0.7.6.2 (9iAS 1.0.2) on NT

I assume you are trying to put an anchor tag in a text item, that points to a document stored elsewhere in the Portal repository.
Use a direct access URL (search the online help for info on these) to construct the link to the document. You can use a relative URL by leaving out the "http://server.domain:port" part of the URL - e.g. {a href="/pls/portal30/docs/FOLDER/MYROOTFOLDER/MYSUBFOLDER/MyDocument.DOC"} - I'm using {} here instead of <> because real tags get messed up in these forum messages.
The Portal FAQ explains how to use httpd.conf to define a redirect directive.
Regards,
Jerry
null

Acrobat 9 PDF Portfolio - setting size of swf content area

Hi,
I added a swf file to a PDF Portfolio in Acrobat 9 Pro Extended and it works fine when the portfolio is opened in Reader 9, except that the swf content area is small. I want it to occupy the entire page. How/Where do I set this?
Thanks
Vijay

I've got this same problem. I add a SWF that's got a width and height of 792x612px. After using the Multimedia->Insert Flash tool the movie is resized to 320x240px and doesn't look right.
Does anyone have any wisdom or insights that can help me understand what I'm missing? I'd love to solve this problem and there doesn't seem to be a lot of info related to this functionality online.
Thanks,
Scott

Portlet could not be contacted error in content area

hi everybody,
i've developed an application using Portal Content Area.And i am
accessing the content Area
like "http://<servername>/pls/portal30/url/folder/<Content area
name>".
But when i access it shows "Error : Portlet could not be
Contacted".then when i press refresh it opens the content Area.
Now i badly in need of avoiding that portlet error and directly
go to content area.
Pl. help me.
thanks in advance
regards,
Kathir

I strongly recommend upgrading to the 3.0.9 release (iAS
1.0.2.2) with the 3.0.9.8.2 patch (this patch should be
available for NT/2000 this week). Also, the database should be
running 8.1.7.1 (or later), as explained in the iAS release
notes.
Regards,
Jerry

BI content with folder structure in portal Content Area

HI Dear Friends,
I have a requirement in my current project where i am integrating the BI reports with SAP EP.Iviews are associated with BI Reports.In the portal on clicking workset it should display folders in the portal content area with Icons instead of in Detail navigation .On click of the displayed folders it should display its sub content with Icons.
I tried in all ways but later i came to know there there is a SAP BI business package which would come up with predifined iviews associated with BI. By importing this business package we can dispaly the BI content in the portal in a folder format .
I am using BI and EP 7.0 versions.
Ratnakar

Ratnakar,
   Let me understand your requirements, correct me if I understood it wrong. You need to display BI reports in Folder structure that is similar when you log on through BEx analyzer or WAD. If this is correct, then you need to upload the BI Role which contain all the required Folder structures and it BI Queries or BI Queries url assigned to that role.Once you upload this role on to portal , you will see folder structure on PCA.
Example
BI Reports - Folder 1
I--> FI reports -- Subfolder 1
I            I--> AP reports 1
I--> CO reports -- Subfolder 2
               I--> Cost Report 1
Hope it helps,
Cheers,
Balaji

Link to content area - portlet not available

I have a link to a content area in that I open from another application. Occassionally, I get a "portlet not available" message. Is this related to navigating directly to the document repository? It works most of the time.
So 3 questions:
Is it acceptable to navigate directly to the content area? (My users then log on and store documents)
Am I getting the "portlet not available" message because of navigating to the content area this way?
Is there another reason I'm getting this message?
Thank you

Unfortunately, the only way to do this would be to not show the sub-folder region and add URL items in another region that link to the folder page in question.

Content area

Similar Messages

Maybe you are looking for