Content Barrier...any other ideas for blocks??
I have had SOOO many problems with my content barrier... when it works it's great, but my computer had some issues this past week and everything had to be reinstalled... long story short, it's not filtering anything EXCEPT for SPECIFIC url's... I can't possibly enter every single inappropiate url manually into the preferences.
Any suggestions. I have to call long distance to talk with a real person, no 800# at Intego, so far they havent fixed anything for me AND they said I couldnt use Firefox with CB... so I would have to take it off of my dock so my kids couldnt access it! I want my money back, any one having the same issues?
Hi
See this search http://discussions.apple.com/search.jspa?objID=c139&search=Go&q=Content+Barrier
Tony
Similar Messages
-
i can't seem to get my iPad to synch with my new iMac. The iTunes prompt says that this computer isn't authorised although i have registered it on iTunes. Any other ideas for how to overcome this block?
What do you mean by 'registered it on iTunes' ? You've authorised your account on your Mac's iTunes via the Store > Authorise This Computer menu option ? And you've copied your library onto the Mac ?
Copying content between computers : http://support.apple.com/kb/HT4527
You may also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
Some calendars in iCal appear corrupted (ie have red exclamation mark by them) but are still OK on iPhone. If I sync, will the calendar data on the phone restore info on the desktop iCal or will I lose that as well? Or could I back up the calendars on my iPhone somewhere and then import them into iCal? any other ideas for how to sort this please? it's driving me mad. thanks.
I don't think there will be a solution to this. Exchange 2003 just isn't supported.
-
I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.
I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go. -
I went to Dell Website and there were no listing for Mas so was unable to download anything to help. Any other ideas????
If you have already downloaded it, have you installed it yet? I know the most recent Flash plug-in isn't optimized for Chrome, but Safari works just fine with it. There should be an arrow pointing down in your upper right hand corner of the screen. If you tap on that, it will list your downloads. Tap on the Flash download and you should be able to follow the prompts to install the plug-in.
-
Some of my apps on both my iPad and iPod Touch no longer have sound. Others still do. I checked general settings. Any other ideas of how to fix this?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?
Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system. -
I keep getting error message -42408 when I try to open ITunes Store.I sent a email to support and they sent me a link from Roy B,I tried both of his sugegstions and neither worked.Anyone have any other ideas????
Did you get anywhere with this, ikeaheerlen?
I am having the same sort problem (although my keyboard is recognized so I'm much further along than you).
I had a MacBook Pro with an XP SP3 partition and a Windows 7 partition on it.
I switched to a Mac Pro and wanted to migrate them over to it.
I used WinClone to make backups of both partitions and transferred the WinClone images to the Mac Pro.
I manually created the partitions and restored the WinClone images into each one.
But VMware wouldn't recognize either one.
So I deleted them both, and let Boot Camp Assistant (re-)create a single Boot Camp partition. Then I restored the Windows 7 WinClone image into it.
Ever since then all I get is "BOOTMGR is missing" error.
I thought maybe since I had dual-boot working (with a boot manager) in the old MacBook Pro setup, that the boot manager must've lived on the Windows XP SP3 partition, and it's completely missing from the Windows 7 partition. So I figured I needed to recreate it somehow.
After using the Windows 7 DVD ISO disc image to boot from, and trying several automated/manual steps, I can now actually get VMware to recognize the Boot Camp partition as being one, but when it tries to set it up for use with VMware, it complains that it isn't ready because it must have shut down incorrectly. It says to boot into Windows, then do a clean shutdown. But when I select the Boot Camp partition from Startup Disk, it boots from it but I still get the "BOOTMGR is missing" error even in a 'native' Boot Camp boot
I've tried all the steps I can find (including manual "bcdedit" steps booted from the Windows 7 DVD disc image) to no avail. I don't know what else to try at this point ... -
i was texting and locked my phone and now it wont turn back on and i tried charching it and everything.. any other ideas?
Try reseting. You may lose everything on phone though
To reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
'Home Button' is the Black depression in the Iphone that you can press
'Sleep/Wake Button' is the black raised area at the top of the Iphone -
Any other ideas on the reception issue?
I am wanting to ask if anyone else has any other ideas on fixing the reception issue?
I just got off the phone with an Apple "Supervisor". He agreed with me that the software update will only correctly display AT&T's signal that I am getting. He agreed that it will NOT remedy the dropped calls that alot of us are now getting with the use of the new iPhone 4. He also agreed that I either need to hold the phone differently or pay extra money either to Apple or to another manufacturer for a case that I have never used on previous iPhones.
So, I am not going to return my beautiful new iPhone 4, but I do want to find out if anyone else has found anything else to remedy this problem without doing anything listed above. I am not trying to beat a dead horse, but I am tired of dealing with the big corporation that Apple has become. The same corporation that now, only cares about the number of iPhones and "Bumpers" sold as opposed to the customers satisfaction that purchased their iPhones.
Message was edited by: Denverk1972
Message was edited by: Denverk1972I don't have any problems either, with or without the bumpers on... it would be nice if ATT had mentioned where in particular their network was having the issues... also I've seen a lot of reports from the UK re the reception problems and one carrier's sim card (which is slightly too big and is shorting the antenna) seems to be the culprit in some cases...
AT&T's statement is below
"AT&T has come through with a statement on reports the company has been capping upload speeds for iPhone users.
In a statement we first spotted through D: All Things Digital, AT&T is describing the problem as one pertaining to a software issue.
AT&T informs that a software defect some Alcatel-Lucent equipment has been crippling 3G HSUPA performance, and says that vendor is working on a repair, though a schedule isn’t forthcoming just right now.
AT&T and Alcatel-Lucent jointly identified a software defect — triggered under certain conditions – that impacted uplink performance for Laptop Connect and smartphone customers using 3G HSUPA-capable
wireless devices in markets with Alcatel-Lucent equipment. This impacts less than two percent of our wireless customer base. While Alcatel-Lucent develops the appropriate software fix, we are providing normal 3G uplink speeds and consistent performance for affected customers with HSUPA-capable devices." -
My camera is not working on my HTC One (M8). Iv'e tried unistall/re-install, restarting, clearing cache, force stop, and the software is up to date. Any other ideas?
Turn off Google Voice detection for Google now. That breaks a lot of cameras surprisingly.
-
Computer won't boot--suggested fixes haven't worked. Any other ideas?
Hi, this is kind of a last-ditch effort, hoping to find out if someone has a magic spell I can try (perhaps some command I can run from single-user mode?) The problem: my new MacBook pro won't boot up (gray screen, apple logo, windmill of death) and I've tried all the suggested avenues: it won't respond to Safe mode, I've reset the PRAM and the power, I've done fsck -y: nada. The problem is that I'm out of town, and so don't have my original install disk or access to an Apple Store. I've tried booting from someone else's OSX disk, to no avail--Apple Care says that other people's disks won't work. So basically I have to wait for the universal OSX disk to come from Apple, which will take days--in the meantime, does anyone know anything else I can try? I realize I'm probably SOL here, but I figured it's worth a shot to see if anyone has any other ideas. I'm desperate.
Thanks in advance for your help.Yes if you have no firewire port then you will not be able to use Target Disk Mode. But if your partner with the mac happens to have a bootable backup then you could boot into it using USB port, As long as they have the backup in a USB enclosure.
I realize that you stated you tried everything to no avail but we are new to your efforts. So just to clarify any miscommunication on our part here are a few links that you can verify with us the procedures you have used in your effort.
SMC reset:
http://support.apple.com/kb/HT1411
PRAM reset:
http://support.apple.com/kb/HT1379
Safe mode:
http://support.apple.com/kb/HT1455
Resolving startup issues using fsck -y:
http://support.apple.com/kb/TS1417
Look towards middle of above article for "Use fsck if necessary"
Can you tell us what happened before the problem started? i.e. Software update, normal shutdown, upgrade hardware, change any configuration, applications started to hang with spinning beach ball, etc... -
I've read others' posts on this issue and still don't have an answer that works! Safari keeps dropping wireless connection every 5 - 10 minutes (it's gotten progressively worse over the last month). My husband, sitting 10 ft across from me, has no issues on a Dell laptop with XP so doesn't appear to be the router or ISP. Safari v5.0.6 Mac OS 10.5.8. Cleared cache, tried kill commands in Terminal, restarts, etc. Only restarting seems to keep it at bay for a period, but then it will start again. Any other ideas?
You posted a question about a problem connecting a Mac to a wireless router. You have an old Dell laptop that works well with that router.
I pointed you to a brief discussion with another poster who had a problem connecting a Mac to a wireless router. He had an old Dell laptop that worked well with that router. I suggested he upgrade the router firmware. He upgraded it, and the problem was solved. Another poster in that thread did the same thing, and his problem was also solved. Within the last day or two, I made the same suggestion to a third poster in another thread, and his problem was solved too.
Conclusion: Upgrading the router firmware helps sometimes.
If I understand your response, you think that checking for a firmware update isn't even worth a try. Am I missing something? -
My bluetooth suddenly stopped working soon after I upgraded to OS 10.9.4. I rebooted SMC, didn't work. Any other ideas? Don't know if it's related to the upgrade. I see other complaints about bluetooth in the thread but none of the solutions offered there have worked for me.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
Since i updated my Iphone 4S to IoS5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?
Check the age of the files you wish to open.
Keynote 6 (the latest you downloaded) will opne Keynote 5 (KN09) files but nothing earlier. For that KN5 will act as an intermediate format (you save KN4 and earlier as KN5), then KN6 can open the resultanr files.
Make sure you have a backup of your original files, in case KN6 cannot replicate some of your earlier builds and transitions.
Les
Maybe you are looking for
-
C240 M3 Stuck at "Configuring and testing memory .."
Hi, This server's just been returned to us from Cisco, who had it on loan since it was new. We're trying to put it back into service, but have hit the following problem. On first power-up the server gets as far as the "Configuring and testing memor
-
Pdf links don't work for imported text
Hi. I imported some common sections located in their own frame file into three different books. I tried this by reference first because I want to make changes only once, to the actual file. When I make a pdf, the toc links to the imported reference t
-
Open Dataset : File Not Created In The Directory
Hi Guru's, I have a small question, I try trough my code to create a file but when I use the "open dataset" nothing produces. I have no errors and in the debug mode the sy-subrc is always to "0". w_locdrive = 'C:\RECON_SUP\'. w_rec = '54
-
Crystal Add on Failed to retrieve data from the DB Vendor Code: 2812
Hi everyone Im using Sap Business One Version 2007A SP00 PL49, SQL 2005 and Crystal Reports Basic for Sap Business One (Add on 2.0.0.7). Whenever i try to generate a report from SBO the system displays the following message "Failed to retrieve data f
-
Error 49: LDAP Invalid credential Supplied when installing Identity Server
I am installing oracle Acess manager with Active directory for windows server 2003. While installing the identity server we facing the issue with Error 49: LDAP Invalid credential supplied. Please see the attached screen shot for more details.