Content barrier x , internet and locking clock

I have the program content barrier x so that i can control internet access for my children. When I have it under no access it works great, also it works great when it comes to blocking certain web sites. But when it comes to controlling how much time they spend on the internet, then i have a problem. the program works well, i set the times that they can go on the net. My son figured out that if he changes the time on the clock on the comp then the program will allow him to go on. Now I tried locking the clock since i am the administrator, but when you later turn the computer on and go back to the clock it is no longer lock. He doesn't know my password, I tried it on my comp, the same thing happens, i lock it and later when i go back it is unlocked. How can i keep this locked?

Never mind, i did a search and found the answer. I opened systems preference and went to security and was able to lock it. I have tried several restarts on different computers and it is working.

Similar Messages

I plug in my iPad and make sure it is connected to the internet and locked. I still get "This iPad hasn't been backed up in (N) Days" What am I doing wrong?

I plug in my iPad and make sure it is connected to the internet and locked. I still get "This iPad hasn't been backed up in (N) Days" What am I doing wrong?

Is the iPad plugged in to the mains ? You can force a backup via Settings > iCloud > Storage & Backup > Back Up Now
If the 'hasn't been backed up' message is stuck on the screen and you can't clear it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You can then force a backup as above.

HT4972 I bought my iPhone from Internet and after an update it got locked. Could anyone tell me what I can do pls?

I bough an iPhone from Internet and after an update it got locked. Please anyone help.

You can either figure out what carrier it's locked to and contact them to see if they offer unlocking, or you can throw it away or sell it and buy an unlocked iPhone from a legitimate source.

Why can't I log in to sign up new software upgrade? I have internet connection and my clock is corre

Why can't I log in to sign up new software upgrade? I have internet connection and my clock is correct.

Where are you trying to log in to something - is there a URL? Describe the steps you are taking and what happens.

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

Is there any reason that my lock keeps unlocking in my network settings? Is there any way to keep it locked? It sure is inconvenient when I have to reboot to get back on the internet and re-lock that lock.

You could try changing the settings in System Preferences/Security & Privacy/General/Advanced/Require an Administator password to access locked preferences
But this will affect all Preference settings.

Search: Internet and my Content on 6220 - Internet...

Hi
Nokia 6220 and the Search Internet and my Content option on the StandBy screen (also under Menu | Internet | Search)
On my phone this happily goes off to Google and brings a search result page to screen. However, when you click on a link to see the page linked it just briefly flashes and does not show anything - the results page is still there.
Comparing my phone with someon elses 6220 I believe it ought to Open the web browser - but this phone of mine does not. It is only 2-3 weeks old so hopefully not broken as such yet.
Network for what it is worth 3UK, and yes I can use the web browser to do the same task and it connects fine.
Anyone met and know a fix of this?
Thanks
6220 on 3uk

You can remove them by switching active standby off but this also removes the row of shortcut icons.
But with active standby off you can assign shortcuts to the navi key. For example press left for a new message, down for contacts etc.

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

Hi Francis,
Are you getting kernel panics?
http://support.apple.com/kb/TS3742
http://www.thexlab.com/faqs/kernelpanics.html

Set Password and Lock w/ content protection

I had always been under the impression that when content protection is enabled on a device and an admin sends the "set password and lock" functionality from the BlackBerry Manager, it only works with device OS v 4.5 and above. However, I was able to successfully execute it on a Sprint Curve with version 4.3.0.127 and with content protection enabled. How can this be?
KB12826 states that it only works as I described: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB12826&sliceId=1&docTy...
Does anyone have any insight into this?

Not that I am aware of, it will mirror exactly what you see on your screen. As this is a user forum you will not get a response from Apple and there is little chance they will see this here.
Best to provide any feedback directly
http://www.apple.com/feedback/

I just went to the new Lion OS from Leopard OS, and when I'm on the internet, it locks up after about 5 or 10 minutes. WhY?

I just went to the new Lion OS from Leopard OS, and when I'm on the internet, it locks up after about 5 or 10 minutes. WhY?

From Leopard or Snow Leopard? If the former then I suggest you erase the drive and reinstall Lion:
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Be sure to run Software Update for any additional updates.

I have bourt i apple iphone 4s of the internet and when i receved it it had acctivashen lock on it and the seller will not give me the infomashen to unblock it any help thanx

i have bort i apple iphone of the internet and it has a ativashen lock on it how can i get it off when the oner will not talk to me to give the icloude password

Return it to them for a refund, if they will accept it.
Otherwise you have a brick.
There is nothing that anyone here or at Apple can do for you.

Re: Transactions and Locking Rows for Update

Dale,
Sounds like you either need an "optimistic locking" scheme, usually
implemented with timestamps at the database level, or a concurrency manager.
A concurrency manager registers objects that may be of interest to multiple
users in a central location. It takes care of notifying interested parties
(i.e., clients,) of changes made to those objects, using a "notifier" pattern.
The optimistic locking scheme is relatively easy to implement at the
database level, but introduces several problems. One problem is that the
first person to save their changes "wins" - every one else has to discard
their changes. Also, you now have business policy effectively embedded in
the database.
The concurrency manager is much more flexible, and keeps the policy where
it probably belongs. However, it is more complex, and there are some
implications to performance when you get to the multiple-thousand-user
range because of its event-based nature.
Another pattern of lock management that has been implemented is a
"key-based" lock manager that does not use events, and may be more
effective at managing this type of concurrency for large numbers of users.
There are too many details to go into here, but I may be able to give you
more ideas in a separate note, if you want.
Don
At 04:48 PM 6/5/97 PDT, Dale "V." Georg wrote:
I have a problem in the application I am currently working on, which it
seems to me should be easily solvable via appropriate use of transactions
and database locking, but I'm having trouble figuring out exactly how to
do it. The database we are using is Oracle 7.2.
The scenario is as follows: We have a window where the user picks an
object from a dropdown list. Some of the object's attributes are then
displayed in that window, and the user then has the option of editing
those attributes, and at some point hitting the equivalent of a 'save'button
to write the changes back to the database. So far, so good. Now
introduce a second user. If user #1 and user #2 both happen to pull up
the same object and start making changes to it, user #1 could write back
to the database and then 15 seconds later user #2 could write back to the
database, completely overlaying user #1's changes without ever knowing
they had happened. This is not good, particularly for our application
where editing the object causes it to progress from one state to the next,
and multiple users trying to edit it at the same time spells disaster.
The first thing that came to mind was to do a select with intent to update,
i.e. 'select * from table where key = 'somevalue' with update'. This way
the next user to try to select from the table using the same key would not
be able to get it. This would prevent multiple users from being able to
pull the same object up on their screens at the same time. Unfortunately,
I can think of a number of problems with this approach.
For one thing, the lock is only held for the duration of the transaction, so
I would have to open a Forte transaction, do the select with intent to
update, let the user modify the object, then when they saved it back again
end the transaction. Since a window is driven by the event loop I can't
think of any way to start a transaction, let the user interact with the
window, then end the transaction, short of closing and re-opening the
window. This would imply having a separate window specifically for
updating the object, and then wrapping the whole of that window's event
loop in a transaction. This would be a different interface than we wanted
to present to the users, but it might still work if not for the next issue.
The second problem is that we are using a pooled DBSession approach
to connecting to the database. There is a single Oracle login account
which none of the users know the password to, and thus the users
simply share DBSession resources. If one user starts a transaction
and does a select with intent to update on one DBSession, then another
user starts a transaction and tries to do the same thing on the same
DBSession, then the second user will get an error out of Oracle because
there's already an open transaction on that DBSession.
At this point, I am still tossing ideas around in my head, but after
speaking with our Oracle/Forte admin here, we came to the conclusion
that somebody must have had to address these issues before, so I
thought I'd toss it out and see what came back.
Thanks in advance for any ideas!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
>
>
>
====================================
Don Nelson
Senior Consultant
Forte Software, Inc.
Denver, CO
Corporate voice mail: 510-986-3810
aka: [email protected]
====================================
"I think nighttime is dark so you can imagine your fears with less
distraction." - Calvin

We have taken an optimistic data locking approach. Retrieved values are
stored as initial values; changes are stored seperately. During update, key
value(s) or the entire retieved set is used in a where criteria to validate
that the data set is still in the initial state. This allows good decoupling
of the data access layer. However, optimistic locking allows multiple users
to access the same data set at the same time, but then only one can save
changes, the rest would get an error message that the data had changed. We
haven't had any need to use a pessimistic lock.
Pessimistic locking usually involves some form of open session or DBMS level
lock, which we haven't implemented for performance reasons. If we do find the
need for a pessimistic lock, we will probably use cached data sets that are
checked first, and returned as read-only if already in the cache.
-DFR
Dale V. Georg <[email protected]> on 06/05/97 03:25:02 PM
To: Forte User Group <[email protected]> @ INTERNET
cc: Richards* Debbie <[email protected]> @ INTERNET, Gardner*
Steve <[email protected]> @ INTERNET
Subject: Transactions and Locking Rows for Update
I have a problem in the application I am currently working on, which it
seems to me should be easily solvable via appropriate use of transactions
and database locking, but I'm having trouble figuring out exactly how to
do it. The database we are using is Oracle 7.2.
The scenario is as follows: We have a window where the user picks an
object from a dropdown list. Some of the object's attributes are then
displayed in that window, and the user then has the option of editing
those attributes, and at some point hitting the equivalent of a 'save' button
to write the changes back to the database. So far, so good. Now
introduce a second user. If user #1 and user #2 both happen to pull up
the same object and start making changes to it, user #1 could write back
to the database and then 15 seconds later user #2 could write back to the
database, completely overlaying user #1's changes without ever knowing
they had happened. This is not good, particularly for our application
where editing the object causes it to progress from one state to the next,
and multiple users trying to edit it at the same time spells disaster.
The first thing that came to mind was to do a select with intent to update,
i.e. 'select * from table where key = 'somevalue' with update'. This way
the next user to try to select from the table using the same key would not
be able to get it. This would prevent multiple users from being able to
pull the same object up on their screens at the same time. Unfortunately,
I can think of a number of problems with this approach.
For one thing, the lock is only held for the duration of the transaction, so
I would have to open a Forte transaction, do the select with intent to
update, let the user modify the object, then when they saved it back again
end the transaction. Since a window is driven by the event loop I can't
think of any way to start a transaction, let the user interact with the
window, then end the transaction, short of closing and re-opening the
window. This would imply having a separate window specifically for
updating the object, and then wrapping the whole of that window's event
loop in a transaction. This would be a different interface than we wanted
to present to the users, but it might still work if not for the next issue.
The second problem is that we are using a pooled DBSession approach
to connecting to the database. There is a single Oracle login account
which none of the users know the password to, and thus the users
simply share DBSession resources. If one user starts a transaction
and does a select with intent to update on one DBSession, then another
user starts a transaction and tries to do the same thing on the same
DBSession, then the second user will get an error out of Oracle because
there's already an open transaction on that DBSession.
At this point, I am still tossing ideas around in my head, but after
speaking with our Oracle/Forte admin here, we came to the conclusion
that somebody must have had to address these issues before, so I
thought I'd toss it out and see what came back.
Thanks in advance for
any
ideas!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
------ Message Header Follows ------
Received: from pebble.Sagesoln.com by notes.bsginc.com
(PostalUnion/SMTP(tm) v2.1.9c for Windows NT(tm))
id AA-1997Jun05.162418.1771.334203; Thu, 05 Jun 1997 16:24:19 -0500
Received: (from sync@localhost) by pebble.Sagesoln.com (8.6.10/8.6.9) id
NAA11825 for forte-users-outgoing; Thu, 5 Jun 1997 13:47:58 -0700
Received: (from uucp@localhost) by pebble.Sagesoln.com (8.6.10/8.6.9) id
NAA11819 for <[email protected]>; Thu, 5 Jun 1997 13:47:56 -0700
Received: from unknown(207.159.84.4) by pebble.sagesoln.com via smap (V1.3)
id sma011817; Thu Jun 5 13:47:43 1997
Received: from tes0001.macktrucks.com by relay.macktrucks.com
via smtpd (for pebble.sagesoln.com [206.80.24.108]) with SMTP; 5 Jun
1997 19:35:31 UT
Received: from dale by tes0001.macktrucks.com (SMI-8.6/SMI-SVR4)
id QAA04637; Thu, 5 Jun 1997 16:45:51 -0400
Message-ID: <[email protected]>
Priority: Normal
To: Forte User Group <[email protected]>
Cc: "Richards," Debbie <[email protected]>,
"Gardner," Steve <[email protected]>
MIME-Version: 1.0
From: Dale "V." Georg <[email protected]>
Subject: Transactions and Locking Rows for Update
Date: Thu, 05 Jun 97 16:48:37 PDT
Content-Type: text/plain; charset=US-ASCII; X-MAPIextension=".TXT"
Content-Transfer-Encoding: quoted-printable
Sender: [email protected]
Precedence: bulk
Reply-To: Dale "V." Georg <[email protected]>

I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)

"I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them? Can I back those up to iCloud? My phone was very likely hacked (Apple's advice was to call the police!)"
That was all I could put in the initial "box." Then it brought me to this page with instructions on how to write a good sentence.
Proceeding ...
After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
Help ...
Running 8.0 on 5S
Thanks!

Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Please help! Major problems (performance and lock-ups) with brand new W520 with Intel 520 SSD

My company primarily uses HP machines but I've been a long time IBM (now Lenovo) fan so I recently had IT purchase me a new Lenovo W520 (product ID 42763LU).
Once the machine arrived I had them do the following:
Remove the 500GB HDD and replace it with an Intel 520 series 240GB SSD
Remove the optical drive and install the 500GB hard drive that came with the machine in the optical bay (with the bay adapter of course)
Format both drives and put a preconfigured windows 7 64-bit image on the SSD
A general summary of the system is the following:
Intel i7-2860QM CPU
8GB RAM
NVIDIA Quadro 1000M
Intel 520 240GB SSD (primary HDD) [SSDSC2CW240A3]
Hitachi 500GB HDD (optical bay) [HTS727550A9E365]
Intel Advanced-N 6205 network adapter
TouchChip Fingerprint Scanner
The machine was a few days delayed getting to me due to "hard drive driver issues" (that's what I was told). When I received the machine I immediately noticed that it was much slower than I expected (I have a custom built i5 HTPC at home running windows 7 on a Crucial SATA III SSD that I was comparing it to) and I was experiencing frequent hangs (ranging from 30 seconds to multiple minutes), super long boot times, general “slowness” at times, and occasional lock-ups. Since our "baseline" laptop here at work is the "equivalent" HP workstation my IT guys have been less than helpful in helping me to solve this issue. Being reasonably computer savvy I decided to try to try to fix the issue myself. I performed the following “troubleshooting” steps:
1. One of the first issues (errors) I noticed in the event viewer was errors related to the optical drive. Clearly the image they installed on the machine was not from a machine with the same hardware configuration. So, I decided to just wipe the machine and perform a fresh install of windows 7 from the disks (well, USB). After spending multiple days installing windows, performing updates, making sure all the drivers were current, and installing only the critical software I need, I was disappointed to realize that although I fixed the optical drive errors the machine was still slow, was hanging, and locking up regularly.
2. Removed the cover on the machine and removed/reinstalled the drive to verify it was secure.Everything looked good.
3. Verified the latest firmware is installed on all my Intel hardware. Everything seemed up to date.
4. I performed a number of troubleshooting steps like booting the machine with/without the battery, with/without the HDD in the optical bay, installed/removed from the docking station, etc. and none of these things helped (also a note – occasionally when running on the battery I was hearing a strange “buzz” or “static” sound coming from the area around the SSD).
5. Next I did some internet research and learned quite a few things. First, it sounds like others have had similar problems with this machine and/or SSD combo and there were quite a few options suggested to “fix” these issues. The general consensus for troubleshooting steps were:
5.1. Download and install the latest Intel chipset drivers and AHCI controller drivers (overwriting whatever windows installs during updates).This didn’t fix anything.
5.2. Turn off PCI express link state power management in the power manager. This didn’t fix anything.
5.3. Disable superfetch, prefetch, indexing, defragmentation, page file, system restore, and hibernate. A few of these were already disabled by windows so in those cases I just verified they were disabled in the services and application editor. These things may have slightly increased performance but did not fix the major hang/lockup issues I was having.
5.4. I followed online steps to edit the registry to disable the PCI link power management by adding ports, adding the required variables, and setting them all to 0. This did seem to have fixed the hangs and/or lock-ups but the machine is still much slower than I would expect (boot times are still pretty slow and it does “stutter” when I’m doing more than one thing at a time. Also a note here – I have the Intel SSD toolbox installed and I noticed that it was giving me a warning for DIPM not being optimized. I made the mistake of clicking “Tune!” and then started having the hang/lock-up issues again. I went back into the registry and sure enough the PCI link power management variables for ports 0 and 1 were set back to 1. I set them back to 0 and the hangs have gone away. I will not be “tuning” the DIPM through the Intel SSD toolbox again…
6. I also fixed a couple of other minor errors I was seeing in the event viewer by disabling benign services and/or making slight timeout modifications (I researched each issue on the internet to verify they were benign before I implemented any changes). These fixes didn't seem to do anything other than make some of the errors/warnings go away. So, the list of errors/warnings has become much smaller but I’m still getting the following (maybe an issue, maybe not?):
Event ID 37 for every processor saying that they are in a reduced performance state for xx seconds since the last report
Event ID 10002 - WLAN Extensibility Module has stopped
Event ID 4001 - WLAN AutoConfig service has successfully stopped
Event ID 27 – Intel® 82579LM Gigabit Network Connection link is disconnected
I suspect the WLAN errors have something to do with windows fighting with the Lenovo access connection tools?
7. Since the machine still seemed slow I downloaded the program AS SSD and checked the performance of the SSD. When I compared my performance numbers to the benchmark numbers I found onlineI was very surprised to discover that I’m getting about 50% of the performance that I should (values below are read/write).
Seq: 262.11 / 188.32 (s/b 504.58 / 298.28) [MB/s]
4K: 15.83 / 44.92 (s/b 21.70 / 62.60) [MB/s]
4K-64Thrd: 165.23 / 154.46 (s/b 241.38 / 234.08) [MB/s]
Acc.time: 0.218 / 0.294 (s/b .0186 / 0.208) [ms]
Score: 207 / 208 (s/b 314 / 327)
Overall Score: 533 (s/b 797)
One more note - it seems like my cooling fan is running at a high speed almost all of the time. This is probably one of my power settings (I think I have it set for max performance) but it's even doing this when there is no load (i.e. I'm using IE and just vieweing webpages - like right now).
So, I apologize for such a long post but I’ve spent countless hours researching and troubleshooting this problem and haven’t been able to figure out what the heck is wrong here. Am I missing something simple or do you guys think I have a SSD and/or problem with the machine itself? To say that any and all help would be greatly appreciated would be a massive understatement – I’m on the verge of pulling my hair out and I really need this machine working as quickly as possible!
Please let me know if you have any suggestions and/or need additional information. Thanks in advance for your help!
-Erik

Lol gotcha about the drive as an option. I didn't go SSD with mine. Do you have the latest firmware on your drive? It is supposed to be v1.97. Just checking (ah and I see item 3 so guess so). Do you have the SSD drive toolbox software installed?
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Solid+State+Drives+and+Cach...)
Seems some useful tools are in there. I can't say much beyond that with the drive. Oh. Why does your fan always run at high speed? Can you describe that? I mean, are we troubleshooting the right kind of issue? Is there anything else going on with your system? I saw about the reduced core speeds message. what are your system loads like? Anything causing high cpu utilization? Could be something other than the drive causing your low numbers and lockups.

I am trying to connect my new iMac to my Buffalo router. I forgot my router password, so I reset it and it is working. I can't figure out how to reset my router password and lock it on my iMac.

I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!

kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

Content barrier x , internet and locking clock

Similar Messages

Maybe you are looking for