Content Conversion Issue - sender File adapter..!!
Hi All ,
Input file:
GRP|HD|7001|7001A00443|012|
GRP-LN|DTL|1|ZTAS|3|002|209782010|0001|EN
GRP-LN|TXT|Customer: KR Test, Case 3
GRP-LN|TXT|Power : -2.25
GRP-LN|DTL|2|ZTAS|4|002|209782035|0001|EN
GRP-LN|TXT|Customer: CL Test, Case 4
GRP-LN|TXT|Sphere Power : -2.25
T 7
I have 4 segments (Header,Detail,Text,Trailer) with "|" as the field separator and HD,DTL,TXT,T are the Keyfields
I need to get the xml structure like below heirarchy. Text segment has to come under Detail structure. Header,Detail and Trailer has to be in the same position.
Recordset
--Header
--Detail
Text
--Trailer
After completion of content conversion, I am getting the XML structure in the below format. All the segments are coming in the same hierarchy.
Recordset
-Header
-Detail
-Text
-Trailer
Text segment has to come under Detail segment. I used the below parameters for FCC.
Recordset Structure: Header,1,Detail,,Text,,Trailer,1
Recordset Sequence: Variable
Header.fieldSeparator
Header.keyFieldValue
Header.fieldNames
Detail.fieldSeparator
Detail.keyFieldValue
Detail.fieldNames
Text.fieldSeparator
Text.keyFieldValue
Text.fieldNames
Trailer.fieldSeparator
Trailer.keyFieldValue
Trailer.fieldNames
Kindly suggest me wat went wrong and how to solve it by content conversion.?
Thanks
Deepthi
Hi All,
Thank you for your replies.
I thought of doing it in mapping . My map is like
DTL -
> E1EDP01
TXT----
> -
EIEDPT2
According to my scenario when ever DTL comes then E1EDP01 has to come and EIEDPT2 has to repeat untill next DTL comes.
Ex: 1DTL and 4TXT segments .So the output will be..
DTL -> E1EDP01
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
DTL -> E1EDP01
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
Right now I couldn't able to generate the above target XML. Everytime I am getting all the TXT segments under one DTL segment like below.
DTL -> E1EDP01
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
TXT -
> -
EIEDPT2
Any suggestions how we can get rid of in mapping?
Thanks
Deepthi
Similar Messages
-
File Content Conversion in Sender File Adapter
Hi,
I am implementing a scenario, where I need to do Content conversion in My file Adapter.My input file is as follows
BGN00S-A200711281003ET4
REF38381012
DTP007D820071128
N1P5P5MicrosoftFI58-0612397
INSY18030XNAN
REFZZZZ666666666
DTP336D819970331
NM1ILIL1AdamsMarkE34666666666
PERIPIPHP770555-5555
N31470 Georgia Club Drive
N4StathamGA30666
DMGD819571022MM7
HD030HLTAE1D
My data type is as below.
<header>
<BGN>
<A></A>
<B></B>
<C></C>
<D></D>
</BGN>
<REF>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REF>
<DTP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DTP>
</header>
<Content>
<N1>
<A></A>
<B></B>
<C></C>
<D></D>
</N1>
<REFAR>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REFAR>
<DMP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DMP>
</Content>
My issue is, How do I set my parameter in Sender Comm channel for content conversion especially at record structure.
I have provided the value as Header,1,Content,*
But its not working.
If I do provide like
BGN_REC,,REF_REC,,DTP_REC,,N1_REC,,INS_REC,,NM1_REC,,PER_REC,,N3_REC,,N4_REC,,DMG_REC,,HD_REC,* then ,I am not getting above XML format. Please suggest or How can I modify my Data type which competes to configure in Channel
Thanks
ManmadhaHi All,
I am sorry for the Jumbled Content. I dont know what happened.
I should get the XML output as below.
header>
<BGN>
<A></A>
<B></B>
<C></C>
<D></D>
</BGN>
<REF>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REF>
<DTP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DTP>
</header>
<Content>
<N1>
<A></A>
<B></B>
<C></C>
<D></D>
</N1>
<REFAR>
<A1></A1>
<B1></B1>
<C1></C1>
<D1></D1>
</REFAR>
<DMP>
<A2></A2>
<B2></B2>
<C2></C2>
<D2></D2>
</DMP>
</Content> -
File Content Conversion Problem: Sender File Adapter
Hi All,
In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file.
#SMESS=IV01:672633SAP:676968:::NL51:02:11+
COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dtn'INIVDA=070416IVNR=6264008195:676968add1
#EMESS=0+
In above txt file there are 3 lines.
1st line starts with #SMESS
2nd line starts with COPS
3rd line starts with #EMESS.
In 2nd line, if u observe there are 3 lines separating by +. My task is, I have to spilt the 2nd line into 3 lines using + separator.
I already used the xx.endSeparator as '+' to spilt the line but it is not working....
Could anyone help me how to do this. This is very urgent
Thnx,
Kumar.Hi Shankar,
1) My Expected XML Structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_IV01 xmlns:ns="http://ms.com/dev/ms">
- <Recordset>
- <DT_SMESS>
<D_9901>IV01</D_9901>
<D_9902>672633SAP</D_9902>
<D_9903>676968</D_9903>
<D_9904 />
<D_9905 />
<D_9906>NL51</D_9906>
<D_9907>02</D_9907>
<D_9908>11</D_9908>
</DT_SMESS>
- <DT_COPS_2>
<D_C022>678713</D_C022>
<D_C023>676968</D_C023>
<D_C008>070416</D_C008>
<D_C111>IV01'3</D_C111>
<D_H559>11</D_H559>
</DT_COPS_2>
- <DT_IVFR_2>
<D_C024>678714</D_C024>
<D_D333>PDA and'IND 2'9206 AD'Dtn'IN+</D_D333>
</DT_IVFR_2>
- <DT_IVDA_2>
<D_D365>070416</D_D365>
</DT_IVDA_2>
- <DT_IVNR_2>
<D_D189>6264008195</D_D189>
<D_H364>676968add1</D_H364>
</DT_IVNR_2>
- <DT_EMESS>
<D_D9901_1>0</D_D9901_1>
</DT_EMESS>
</Recordset>
</ns:MT_IV01>
2) I am not getting any error even if I use key Fields or Not becoz in the RecordSet Structure I mentioned DataType, 1 instead of DataType, *.
3) FCC Parameters:
Document Name: MT_IV01
Document Namespace: http://ms.com/dev/ms
Recordset Structure: DT_SMESS,1,DT_COPS_2,1,DT_IVFR_2,1,DT_IVDA_2,1,DT_IVNR_2,1,DT_EMESS,1
Recordset Sequence: Ascending
Key Field-type : String (Case-sensitive)
4) Error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'DT_COPS_2':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified! -
Content conversion in sender file adapter problem
Hello,
I receive a flat file with the following structure:
HEADER;...fields;
ITEM;...fields;
ITEM;...fields...;
HEADER;...fields;
ITEM;...fields...;
...etc.
and I am converting it to xml with the same structure. The Problem by the conversion is that the result looks something like this:
HEADER;...fields;
ITEM;...fields;
ITEM;...fields;
ITEM;...fields;
HEADER;...fields
HEADER;...fields.
So, all the ITEM recordsets are ordered to one HEADER structure and the other HEADER structures have no ITEMs.
Do you have a suggestion how I can get this right?
Thanks!!
Best Regards,
MirceaHi,
Can you provide with the details of FCC parameters you have used ??
The problem might be there in the occurance..
Regards,
Chandra -
Problem with file content conversion in receiver file adapter
Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
ChandraPosted in Incorrect forum.
Posted again in Process Integration forum -
Production issue - Sender File adapter not picking up the files from folder
Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PMHi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana -
Regarding issue sender file adapter in clustered environment(PI 7.0)
Hi Experts,
we are using sender file adapter in clustered environment(there are 6 J2EE cluster nodes in XI system) for an interface.the file sender communication channel for this interface is scheduled to run twice every day. recently the channel stopped polling (picking the files from the source directory) and i dont see any error.
when i open Communication Channel monitoring in RWB and select the file sender communication channel and run it manually, none of the cluster nodes are polling for the file.
i have tried editing the communication channel in Integration Directory and activating it. but it does not pick the file.
Can you let me know how the issue can be resolved.
Thanks
-Kaushik
Edited by: Kausik M on Dec 18, 2008 4:13 AMKausik,
A computer cluster is a group of linked computers, working together closely so that in many respects they form a single computer. The components of a cluster are commonly, but not always, connected to each other through fast local area networks. Clusters are usually deployed to improve performance and/or availability over that provided by a single computer, while typically being much more cost-effective than single computers of comparable speed or availability.
clearly your cluster nodes are out of sync...!!!!
It is possible that your ftp server went down for a while . And in the profile of FTP machine the entry of XI server is not made permanent .
1. Try to ping the FTP site from XI server.
BTW are u getting any error msg at RWB ?
Regards, -
Duplicate File Handling Issues - Sender File Adapter - SAP PO 7.31 - Single Stack
Hi All,
We have a requirement to avoid processing of duplicate files. Our system is PI 7.31 Enh. Pack 1 SP 23. I tried using the 'Duplicate File Handling' feature in Sender File Adapter but things are not working out as expected. I processed same file again and again and PO is creating successful messages everytime rather than generating alerts/warnings or deactivating the channel.
I went through the link Michal's PI tips: Duplicate handling in file adapter - 7.31 . I have maintained similar setting but unable to get the functionality achieved. Is there anything I am missing or any setting that is required apart from the Duplicate file handling check box and a threshold count??
Any help will be highly appreciated.
Thanks,
AbhishekHello Sarvjeet,
I'd to write a UDF in message mapping to identify duplicate files and throw an exception. In my case, I had to compare with the file load directory (source directory) with the archive directory to identify whether the new file is a duplicate or not. I'm not sure if this is the same case with you. See if below helps: (I used parameterized mapping to input the file locations in integration directory rather than hard-coding it in the mapping)
AbstractTrace trace;
trace = container.getTrace();
double archiveFileSize = 0;
double newFileSizeDouble = Double.parseDouble(newFileSize);
String archiveFile = "";
String archiveFileTrimmed = "";
int var2 = 0;
File directory = new File(directoryName);
File[] fList = directory.listFiles();
Arrays.sort(fList, Collections.reverseOrder());
// Traversing through all the files
for (File file : fList){
// If the directory element is a file
if (file.isFile()){
trace.addInfo("Filename: " + file.getName()+ ":: Archive File Time: "+ Long.toString(file.lastModified()));
archiveFile = file.getName();
archiveFileTrimmed = archiveFile.substring(20);
archiveFileSize = file.length();
if (archiveFileTrimmed.equals(newFile) && archiveFileSize == newFileSizeDouble ) {
var2 = var2 + 1;
trace.addInfo("Duplicate File Found."+newFile);
if (var2 == 2) {
break;
else {
continue;
if (var2 == 2) {
var2 = 0;
throw new StreamTransformationException("Duplicate File Found. Processing for the current file is stopped. File: "+newFile+", File Size: "+newFileSize);
return Integer.toString(var2);
Regards,
Abhishek -
File Content Conversion Parameters in FIle Adapter
Hi
I am doing a scenario - XML file to Text file using File content conversion parameters in Receiver File Adapter Channel.
I given FCC Parameters like:
DATA.addHeaderLine - '0'
DATA.fieldSeparator - ,
DATA.endSeparator - 'nl'
But im getting error in Receiver File Adapter as - fieldSeparator not specified.
i would be greatful if any one help me.
Regards
RajeshHi Rajesh,
There are lot of blogs which explain File Content Conversion in different scenarios:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
I hope this helps.
Regards.
Praveen -
File Content Conversion in Sender File
how to convert a fixed length flat file without end seperator sent to XI to a xml form?
Pleasegive me the idea of Sender Adapter configuration details (esp endSeperator)Hi,
For file content convertion if there are fixed lenth then no need to give the feildseperator,just give the fixed lenths for all the feild in FCC.
check below links for FCC
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani.
Reward Points If Helpful -
Content conversion in Sender JMS Adapter
Hi,
Scenario is file to IDoc
My source file is ' ; ' separated file coming from MQ via JMS adapter. now I need to convert this to XI.
Source DT looks like
Root
HEADER (Occurance 1)
Field 1
ISOCURCD
TRANKODE
IDENTIFIER
DATO
TIME
DETAIL(Occurance 1 to unbounded)
ISOCURCD
TRANKODE
EFFDATE
COMMDATE
DKKVAL1
USDVAL1
TRAILER(Occurance 1)
ISOCURCD
TRANKODE
TRANCOUNT
According to How to use content conversion in JMS guide from SDN i have configured the content conversion parameters in the module of JMS sender adapter.
In the processing sequence given the module name as localejbs/AF_Modules/MessageTransformBean and module Key as Plain2XML.
And in module configuration
Parameter Name Parameter Value
Transform.Class com.sap.aii.messaging.adapter.Conversion
Transform.ContentType text/xml;charset=utf-8
xml.keyFieldName TRANKODE
xml.keyFieldType CaseSensitiveString
xml.recordsetName Root
xml.documentName MT_ROOT
xml.documentNamespace http://XXX.XXX.XX/xi/XXXXX
xml.processFieldNames fromConfiguration
xml.conversionType StructPlain2XML
xml.recordsetStructure HEADER,1,DETAIL,*,TRAILER,1
xml.HEADER.fieldNames Field1,ISOCURCD,TRANKODE,IDENTIFIER,DATO,TIME
xml.HEADER.fieldSeparator ";"
xml.HEADER.keyFieldValue H
xml.fieldSeparator ";"(if i don't use this then the file is not being picked and getting an error in the CC monitoring of RWB saying xml.field separator missing.)
Similarily for Detail and Trailer records as well.
But when I run the scenario, the file is being picked up but I am not getting any payload into the inbound message.
Can you please help me where I have configured wrongly. And one more thing will this configuration help for ; separated file .
Thanks & Regards,
Kumar
Edited by: Kumar on Dec 19, 2007 11:11 AM
Edited by: Kumar on Dec 19, 2007 11:15 AMHI,
Have you gone through the below pdf i think it will help to find ur mistake.
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Thnx
Chiarg -
REG: File content conversion in Receiver file adapter
HI Gurus,
I have the scenario like proxy to file with content conversion
my message type for the source like this
MT_SOURCE
-----||
|---ROW
------------||
|---LINE
target strucuture also same
MT_TARGET
-----||
|---ROW
------------||
|---LINE
i am using the following FCC parameters in receiver file adapter
LINE.fieldSeparator = ' '
LINE.fixedLineWidth = 90
LINE.lineSeparator = 'nl'
LINE.fieldFixedLengths = 200
LINE.endSeparator = 'nl'
the output file show the data differently in note pad when compare to word
word output
dgepvs 023456987
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
kgdd0016155710 SS Smw Ne 01
notepad out put
dgepvs 023456987 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01 kgdd0016155710 SS Smw Ne 01
word output is the correct output wat i am expect but same out put i want in note pad can any help me out for this how can i resolve this
Thanks in advanceThere is nothing wrong in your content conversion parameters. This is pure editors interpretation for the next line character.
I would do in java program to fix this issue using '\r\n' You might want to try and see how that helps for notepad editor. -
Content conversion in Sender JMS adapter-document
Hi,
I am tring to read fixed length flat file from MQ-series Queue using JMS adapter.
I want to use content converstion to convert the flat file to XML.
I am not able to open the PDF link provided in SDN.
if anyone has a copy of the pdf document on JMS content conversion, could you please enmil it to me
at [email protected]
Edited by: ashok sri on May 27, 2008 5:25 PMplease go through the document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710 -
Content conversion in Reciever File Adapter
Hi Frens,
Iam doing A FCC in Reciever file adapter. My input structure is
DT_structure
->Record
->Row
Field1
Field2
Field3
I have donr the configuration as
Recordset Structure : Record,Row
Row.fieldSeparator : ,
Row.endSeparator : 'nl'
Record.fieldSeparator : 'nl'.
With this configuration Iam able to display only one record but I need to display multiple records in the file. Please do suggest me wha need to be done to achieve this.
Radhika.First check whether your datatype has the occurrence of records unbounded or not. Then goto content conversion. If both your Record and Row tags can occur multiple times, then use
Recordset Structure : Record,*,Row,*
Or if Record occurs only once and multiple Row nodes are required, then use
Recordset Structure : Record,1,Row,*
Regards,
Prateek -
Reg:File content conversion for Sender File Adaptor
Hi all,
i would like to know , how the file content conversion is written for the below mentioned XML code. The flat file will have only the table name and the fieldname
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Mt_File xmlns:ns0="http:/file_to_idoc">
<query_table>ztable1</query_table>
<row_count/>
<Fields>
<item>
<fieldname>zempno</fieldname>
</item>
</Fields>
</ns0:Mt_File>
regards
priyaFirst you create the conversion rules, then you create the XML structure accordingly, not the other way.
online help will help you
Maybe you are looking for
-
How to use an iPad as a second monitor with Bluetooth?
I know there are several apps that will allow me to use my iPad as a second monitor over my wifi connection. But is there a way to us it over blue tooth or with a special cord? Thanks!
-
Can't find drivers for WIN XP - Satellite L300D-10U
Hi! I am really having a hard time finding drivers for xp for my laptop. I downgraded it from Vista and cant find it anywhere I looked. I found only the Ethernet driver. The drivers cant be found on the official web site. (at least i cant) Would anyo
-
What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?
-
Hi, I have created a template with objects on a master page. Problem: the type box will not arrange to front on the object either on page or master page. I've tried arranging the object on the master to the back and text box on page one to the fro
-
Is it possible to create Detail entity row before Master entity row?
Hi All, I have a Master - Detail relationship. When I insert a row into the detail entity, I need to create a corresponding master record. Is this even possible? I've been fiddling with different association relationships, this.setNewRowState() comma