Content Copier Freezing

I've backed up my phone previously but today when I tried to use content copier to back it up the program just kept freezing on the section saying phone model-specific backup and wouldn't go past 66%. Any ideas apart from re-installing PC Suite?

The reason I asked is that restoring a previous versions' settings is not good practice. The 'vanilla' phone after an update of firmware should have the settings applied fresh and all apps re-installed to phone mem!
It avoids crashes, freezes and resets!
www.blogn95.blogspot.com

Similar Messages

  • Content Copier freezes with N95

    Hi there,
    I just updated my software on my N95.
    I did everything right and have been trying to restore the backup I made with content copier.
    My problem is that it doesn't complete the restore and seems to stop at 68%. I thought that maybe it wasn't responding, but it was still running and seems to be responding normally.
    The backup was successful, but I just can't restore it.
    Any ideas? I have a lot of numbers and calendar entries on my phone that I need to get back. I thought I was doing the right thing by backing up my details, but I still seem to have lost it all.
    Thanks for your help
    Solved!
    Go to Solution.

    Hi there,
    I managed to get my contacts back because I had luckily sync-ed my phone earlier. Though I had forgotten I'd done it.
    I checked your way of doing it and found the calendar details (among a lot of other junk I had to sort through.)
    I just did the PC sync again and it loaded them all back on (though I made a copy of my Outlook address book first, just in case)
    I'll definately have to remember both ways. I'm just glad that I have got my numbers back. The calendar I can deal with.
    Thanks

  • Content copier freezes - N72 PCS6.81 - no operatio...

    Hello,
    I uses, since a short time, a N72.
    I tried a backup with PCS 6.81. (USB)
    The program seems to run normally and shows finally 100% ended but the lonely action buttons remains frozen as "Cancel" (no close button).
    A few hours later... You need to close the content copier window to make something else :
    1- the program alerts "not ended" data loosen
    2- a nbu file is created (well closed and content OK is a without answer question ?)
    3- you get back control to your phone (locked during operation) but memory is empty so you need to restart it.
    I am unable to know if I have or not a backup.
    For me, at this time, N72 has no backup operational function.

  • Content copier stops and freezes

    Hi everybody!
    I'm having problems while restoring a backup with Content Copier from PcSuite 6.83 to my 6280 phone. It seems to stop at 23% and doesn't go on anymore.
    Can anyone help me?

    Hi ziopiero
    Have you thought of trying reformatting your memory card, after rescuing any valuable data?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Content copier problem

    Hi,
    I just updated to the latest software v21.0.016 for N95. I did the content copier prior to updating and now when i am trying to recover it back onto my phone it keeps freezing at 85%. I tried twice but it does the same thing. I am thinking that out of the thousands of posts it has been covered somewhere but i cant find it. Is there some way i can at least put the contacts on?
    Thanks a heap for your help

    actually never mind..
    it always helps when you actually use the updated pc suite
    it works now

  • Content Copier stops at 99% during backup of E61

    I have made several attempts (via IR as well as Bluetooth) to back up my phone to my PC via the Content Copier, yet every time the progress bar stops permanently at "99% complete - Full backup". After waiting for 20+ minutes, I press the "Cancel" button, the window of the Content Copier seems to freeze, but then recovers another 5 minutes later. Still, the log says "Backup was cancelled". I have tried both to back up phone memory and memory card as well as only the phone memory.System Info:
    Operating system: Microsoft Windows XP, Build 2600, Service Pack 2
    Nokia PC Suite: Version 6.82.22.0
    Bluetooth stack: Microsoft Bluetooth stack, Version 5.1.2600, Build 2180
    Phone: E61, Firmware version: 1.0610.04.04

    20-Nov-200709:32 PM
    gharryh wrote:
    I am trying to backup my E50 by using the PC-Suite included content copier. All goes well until the progressbar reaches 80% and it is at the last part where phone specifik data is saved.
    And it stays there for ever. Any idea how i can fix this behaivior?
    Harry
    Please be sure that ALL application are closed before you get started.
    It is also (backup) does not finish if you have a storage for any messages on SD-card instead of phone memory.
    RGDS

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • PC Suite 7.1.40.1 Content Copier does not work.

    The Content Copier in PC Suite 7.1.40.1 fails to Backup the Data from the Phone. "The phone did not contain any content ..."
    All Attempts to uninstall, delete Directories and Registry Keys did not help.
    The Content Copier from 7.1.30.9 works fine.
    OS: Windows XP Pro SP3

    I'm also having problems with V7.1.40.1 of this software, running on WinXP Home edition V2002 SP3.
    (via Bluetooth Toshiba stack) from a 6600 Slide.
    Trying to backup Contacts list (the MOST important data!!!) it just sits there forever with the 'busy' wheel twiddling round and zero % progress on the display bar.  It DOES say it might take a while but more than 30 minutes with nothing indicated for only a couple of hundred contacts suggests actually no progress at all!  It IS possible to read contact, calendar, messages etc., using other apps in the suite - but then the progress bar on the PC Suite display tends to stop, showing (eg.) 90%, although it looks like all the content has been transferred.  Using other apps, of course you can't create an alternative backup file!!!
    When the contacts list fails to transfer, the phone screen momentarily flashes up a 'sync complete' message after only a few seconds - although I THOUGHT I was backing-up, not sync'ing!
    PC Suite looks like a very nice software package - but does ANYONE (except US!!!) actually test it with real data and real phones???
    Message Edited by veryirritated on 15-Dec-2009 05:41 PM
    Message Edited by veryirritated on 15-Dec-2009 05:41 PM

  • PC Suite 6.81.13: Content Copier 3.0 crashes at 10...

    After doing what seems to be a successful backup the content copier program crashes after several minutes of disk activity when at 100%.
    This occurs only with 6.81.13 - the previous issued versions of PC Suite e.g. 6.7 do not have this problem.
    This was repeated on 2 PC's both with Windows XP (1 home edition, 1 professional).
    Both PCs have a previous version of PC Suite installed that was deinstalled via the installation of the latest version.
    The backups were done from my Nokia 9500 using the DKU2 cable.
    Also tried it with my wifes 9300 - same thing happened.
    Because of the severity of this problem I considered reinstalling the previous version but I already deleted that and I cannot seem to access previous versions of PC Suite via the normal website.Message Edited by djmoore670 on 25-Sep-2006
    02:52 PM

    PC Suite 6.82 fixes this.

  • Critical error in Content copier

    Hi everybody!
    Installed the latest version of PC Suite.
    When I launch the program it connect to my phone (6111) via Bluetooth.
    File manager works, Messages works....but, I can't make the backup.
    When i stasrt content copier, it sees my mobile phone but, when i click on "Backup" after 5 seconds it says: "A critical error occurred (0x80400001). Restart your phone and content copier. If this do not help, try restart your pc". But even if I restart both of them it still not working...
    THIS IS MAKING ME MAAAAAAAAAAD. I NED TO BACKUP MY CONTACTS!
    The strange thing is that with teh previous version of PC suite it worked.
    Anyway, I tried to reinstall the previous version but it works no more.
    I'm using WinXP SP2
    and a Belkin Bluetooth USB key (with WIDCOMM drivers).
    Please help me!
    THANKS :-)

    I also have same problem. I have a 6230i and previous version of Nokia PC Suite worked fine.
    Is the name that appears in the content copier important? Because in my case it shows ?s????p????? . This is probably because I had changed the phone name in the bluetooth settings and now I can NOT change the name that appears in PC Suite back to "Nokia 6230i". (I used IVT bluesoleil software.)
    Also I cannot copy the sounds folder using the "sounds" folder using the file manager. I get message about copyright protection.
    Any help would be much appreciated.

  • Urgent Help, Re Nokia Backup / Content Copier

    Help,
    I need to gain access to a *.nbu file, This Content Copier has some old Numbers in it, And I need to open it without the Headache of Restoring it on another phone and going thru loads of numbers.
    anyone know if Nokia do a piece of software that opens the *.nbu files so I can retreive some VERY VERY important information please???

    Awwww, sorry to hear your shoes and headache. There are some really good sales on at the moment and you may just pick up something real cheap.
    I think you might have to decide between the hassle of restoring it to a phone or paying $49. It really doesn't take that long to restore it to a phone so I would recommend you trying that. I'd do it for you myself if I could. 

  • Connection problme with "Content copier"

    Hi,
    I have a problem with application content copier.
    When i load program the downlaod begin but after few time the message : connection lost appear.
    I haven't any problem with other applications of pc suite.
    I have try to install pc suite, i worked with nokia nseries pc suite and it's the same.
    Could you help me please? 

    try to restore backup category by category and not all at one time. the problem usually is one of the categories " mostly the contacts" , if so it might be beacause you had some contacts with special characters on the name fields.
    if the problem is in the contacts category, try to use sync option if you have ever sync'ed your contacts to outlook before.
    Fear not those who argue but those who dodge

  • Content copier backup has contacts etc. but won't ...

    I have a problem with Content Copier backups from my E71 to my PC.
    1) I choose to backup everything.
    2) Backup proceeds, but says there was an error: on viewing logs there is nothing listed under "These items could not be backed up" heading. Backup log says contacts, messages, calender have all been backed up.
    3) On finishing backup my E71 is sometimes left with a semi-blank Home screen, and hung. Have to remove battery to get it working again.
    4) On trying to restore this backup, contacts, messages, notes, calendar aren't listed as being included in the backup.
    Installing the trial version of Noki shows that the backups DO indeed contain contact details. But presumably there's something in the backup file that makes Content Copier think that contact details aren't in fact there, or that they're corrupted.
    PC Suite 7.1.18.0
    E71 firmware version 100.07.76 and 200.21.118
    Solved!
    Go to Solution.

    I don't think it's the phone.
    I've now tested using Content Copier to do backups on my laptop. This still had PC Suite 7.0.9.2 on it, and the backup completed without error, including "Settings" to backup phone-specific settings. I then upgraded PC Suite to 7.1.18.0 and now the backup fails if I have "Settings" selected.
    I've also tried completely uninstalling PC Suite and reinstalling 7.1.18.0 but I still get failed backups.
    PC Suite 7.0.9.2: backup works correctly, including "Settings"
    PC Suite 7.1.18.0: backup fails if "Settings" are selected to be backed up
    I've opened the backup files in Write, and both failed and completed backups contain Contacts data in VCARD format (which is presumably why Noki could see contact data), but the completed backups also have another 18Mbytes of binary data that are missing from the failed backup files (presumably the phone-specific settings stuff).
    It would be nice if Content Copier could allow me to extract the Contacts and Calendar data from a failed backup: the data is in there!
    I've been communicating all this with Nokia Europe Support, so hopefully this will be fixed soon.

  • Restriction of content copying

    Hi,
    I am aware of restricting "Content Copying" per pdf by Managing security policies, but would like to know if we can restrict Content copying by default to all the pdf documents. My requirement is that whoever opens any and every pdf doument, should have the restriction of content copying. Can you advise.
    Regards,
    prash...

    Hi,
    By using Row level Security you can achieve this.
    refer below blogs for more information.
    http://gerardnico.com/wiki/dat/obiee/security_level
    http://satyaobieesolutions.blogspot.com/2012/06/obiee-11g-security-week-row-level.html

  • Set Content Copying: Not allowed in Adobe forms

    We have developed an adobe form, non interactive form, which has scanned signatures, incorporated as images, of authorized personnel.
    But we found that these signatures (images) can be copied by standard copy (Ctr+c).
    After a brief study we could find out that we need to set the Content Copying as Not allowed, in document properties, as one of the possible solution, but we are unable to do so.
    Could you please suggest a way out as to how do we set Content Copying: Not allowed, in the document properties, of the PDF document.

    Thank you for your view.
    The XML equivalent of the Adobe form, designed, has a tag <PDF security> which has "copy content" set as 1.  The possible solution to my problem is to set the copy content to zero or a value which deactivates the copy content. But even though we set the value to zero, the moment we activate the form it reset itself to 1. Could you please elaborate on this one?

Maybe you are looking for