Content copier stops and freezes

Hi everybody!
I'm having problems while restoring a backup with Content Copier from PcSuite 6.83 to my 6280 phone. It seems to stop at 23% and doesn't go on anymore.
Can anyone help me?

Hi ziopiero
Have you thought of trying reformatting your memory card, after rescuing any valuable data?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Content Copier stops at 99% during backup of E61

I have made several attempts (via IR as well as Bluetooth) to back up my phone to my PC via the Content Copier, yet every time the progress bar stops permanently at "99% complete - Full backup". After waiting for 20+ minutes, I press the "Cancel" button, the window of the Content Copier seems to freeze, but then recovers another 5 minutes later. Still, the log says "Backup was cancelled". I have tried both to back up phone memory and memory card as well as only the phone memory.System Info:
Operating system: Microsoft Windows XP, Build 2600, Service Pack 2
Nokia PC Suite: Version 6.82.22.0
Bluetooth stack: Microsoft Bluetooth stack, Version 5.1.2600, Build 2180
Phone: E61, Firmware version: 1.0610.04.04

20-Nov-200709:32 PM
gharryh wrote:
I am trying to backup my E50 by using the PC-Suite included content copier. All goes well until the progressbar reaches 80% and it is at the last part where phone specifik data is saved.
And it stays there for ever. Any idea how i can fix this behaivior?
Harry
Please be sure that ALL application are closed before you get started.
It is also (backup) does not finish if you have a storage for any messages on SD-card instead of phone memory.
RGDS

Content copier stops at 80%

I am trying to backup my E50 by using the PC-Suite included content copier. All goes well until the progressbar reaches 80% and it is at the last part where phone specifik data is saved.
And it stays there for ever. Any idea how i can fix this behaivior?
Harry

20-Nov-200709:32 PM
gharryh wrote:
I am trying to backup my E50 by using the PC-Suite included content copier. All goes well until the progressbar reaches 80% and it is at the last part where phone specifik data is saved.
And it stays there for ever. Any idea how i can fix this behaivior?
Harry
Please be sure that ALL application are closed before you get started.
It is also (backup) does not finish if you have a storage for any messages on SD-card instead of phone memory.
RGDS

Organizer stops downloading getting media. Download starts gets to 49%then stops and freezes. Manual shutdown, restart, still froze in organizer. A message say's an app is preventing start-up.

Guess I was in the wrong place to ask question. So here it is, in PSE 11, I was downloading photos from Sony's Play Memories program, got a news Sony camera and they push this program, knew I shouldn't of used it, but to late. While downloading photos from this into PSE organizer, it gets to 49% and freezes. Must manually shut off computer to close out of Elements. A small window appears stating "closing 1 app and shutting down, this app is preventing a shutdown".
My back up is on an external hard drive, Made sure I had the back-up for I was going to uninstall PSE 11 and Sony's Play Memories then re-install PSE 11 from hard drive. Before I knew it, the back up started to down load and picked up the faulty portion from the Organizer. So now they are both useless as I see iut. Any thoughts?
gulp...

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

4.2.1 stops and freezes my iPad it wont do a complete update !!!

After finding 4.2.1 eventually I sat my iPad on the desk and left it...coming back to it I find that it wont go past 75% and it just keeps freezing...my poor iPad. !!!!!!

After the backup process finished (nearly an hour long), got an unable to update error. DFU and restore seemed to go all right and iPad reappeared in iTunes rocking the 4.2.1 version number.
It began the "preparing to sync" process about 30mins ago and it seems stuck on Step 1 of 3. No movement in the progress bar and the beach ball is spinning away whenever I mouse over iTunes.
Will try to Force Quit iTunes and see what happens.
UPDATE: Unplugged the iPad and hard-reset twice - no joy. Startup progress gets to about 90% point and stops.
Did Apple just brick my iPad?
2nd UPDATE: Patience is indeed a virtue. As I continued to research the issue, I left the iPad in its apparent bricked state. Suddenly the iPad appeared with the standard set of icons. It now seems to be syncing as it should in iTunes.
Apple - Really? There's no way to provide succinct progress information during an update?
Message was edited by: rotormac

The sound stops and freezes iMac

Regards
For some time my iMac stops playing sounds, such as iTunes, games and movies. When that happens, the computer freezes momentarily, which is annoying.
I noticed that the problem seems to be software, not hardware, but I'm not clear what will be, because I do not notice anything strange in Activity Monitor or when Disk Utility repair permissions.
Any idea or solution for this case?

Back up all data before making any changes.
If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
If there's no improvement, or if you're not aware of having installed anything that fits the description, post again.

Video Play Stops and Freezes

During play, the video freezes after several minutes. Not all videos are affected by this. Video podcasts and other videos downloaded from iTunes work more reliably. Videos I edited (I use Ulead VideoStudio 10 & 11 or Roxio Creator 9) are a problem and generally will not play. All the edited videos are rendered to the iPod setting in the program(s) and play perfectly in iTunes.
All the videos, regardless of their source, play perfectly on my two year old 60 gig 5th generation iPod.
From other postings, it appears that other iPod Classic owners are experiencing this problem.
Could this be a "firmware" problem that Apple will be able to resolve or is there a hardware problem in this 1st generation Classic?

I deleted all the video files from iTunes and sent them to the recycle bin. This did not delete the files from the the file folder located in My Documents/My Videos. Next, I went back to iTunes and added each video file into the Movies playlist.
After completing this for all my videos, every file played perfectly on my iPod Classic.
With this solution to my videos freezing while playing, I am completely satisfied with the new iPod. I plan to buy another Apple Dock for use in the car with the factory installed video player.

My video keeps stopping and freezing. How can I fix this for ipad 4

Can anyone help. Do I need to download adobe flash for ipad 4. To fix the problem of my video freezing or stopping

If you're streaming video it's possible that your internet connection simply isn't fast enough to stream video. Have you tried to start a video, then pause it and wait a couple of minutes, then play and see if you can get enough of a head start to keep going?
You can't put flash on the iPad, flash and iDevices will never play together. You could look to see if your source has an app or look into various third party browsers that support flash.

ITunes Store music preview stops and freezes all playback

I hope someone can help, I'm at wits end with this.
There's a lot of people complaining that they can only preview a few seconds of a song in the iTunes Store.
Oh yeah? Big deal, just be glad that's your only problem with it, because when this happens to me it locks up my iTunes from playing anything else and I not only have to exit iTunes but then terminate the process from task manager.
Let me describe it in more detail because it's so weird... and YES, I DO have the latest version (10.7.0.21)
So I'm in the iTunes store, I'll click the song preview button, I may or may not hear a few seconds of the song but it ALWAYS just halts playback before getting very far. I can move the slider, hit pause or stop or try to preview another song but nothing happens. What's worse, afterwards I'll go to my iTunes music Library and try to play a song and it pops up but doesn't play, like as if it is on permanent pause. It just DOES NOT play anything, therefore making iTunes completely useless other than messing with playlists and song info.
So now my only choice is to exit iTunes, oh but the problem is far from over. Now iTunes dissapears from my taskbar, but the little icon by the clock is still there. Clicking on it does nothing. I cannot rerun iTunes until I terminate the process in task manager. Okay, I kill it and start fresh just to have it happen all over again. I just dread pressing that **** preview button, I can't live like this.
This certainly was never a problem in earlier versions of iTunes and there's been no other significant change on my PC in the last two months (which is the last time I remember things working as they should). What gives?

Perhaps try resetting your iTunes Store Cache.
Go "Edit > Preferences". In the Advanced tab, click the "Reset cache" button shown in the following screenshot:
... and then click OK.
Restart your iTunes, and head back to the Store. Are you getting full previews now?

9300 content copier problem and others

Hi
my properties are win xp service pack 1.pc suite ver 6.70.22, bluetooth connection.
tried backing up my phone but when its 22% done i get an error message. what could be wrong?
i have forgotten the password for my memory card. what can i do to disable it.
Does anybody know how to make contact names appear on the computer when you are in messages?
lord arokian

Almost certainly caused by PC Suite 6.7 being buggy. Go back to v6.6 and you should be OK.
Steve Litchfield
3-Lib (Tips/resources/Info for Nokia smartphones and Communicators) plus All About Symbian

My iMac beeps and freezes

I will be using it and it randomly will stop and freeze than beep three times the only way to stop it is a hard boot up unplugging it only works I had upgraded the ram to the max that a 27 inch 2011 model will take I believe 16 gb

Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.

Content Copier crashed when I backup memory of pho...

In process backup crashed Content Copier with error "Unexpected error (0x80100011). Restart Content Copier application and try again..." after 25%.
I have WinXP SP2, MS Outlook 2003 SP1, firmware 5.5.
It doesn't started any application on phone when runnig backup.
Can you help me?

...I'm connect via USB cable.

***** .nfc Content Copier backup file format incom...

The PC Suite 6.70.22 Content Copier’s Restore function (running on Windows XP SP2) cannot restore the Contacts to a 6680 mobile from a .nfc file on a USB flash memory stick created earlier on another computer by PC Suite 5.8 Content Copier’s “transfer data from the phone to the PC” function (running on Windows 98SE) which copied the contacts from a 7250i mobile.
Wishing to copy my contacts from my old 7250i mobile to my new 6680 without the expense of purchasing a DKU-5 USB cable for the 7250i (the 6680 has a DKU-2 USB cable in the box), I first copied the 7250i’s contacts using the infra red link to an old laptop running Windows 98SE by executing PC Suite 5.8 Content Copier’s “transfer data from the phone to the PC” function which created a file named “C:\Windows\Profiles\my name\My Documents\Backup files\Nokia 7250i contacts 15-12-2005.nfc”.
I then copied this file to a USB flash memory stick and subsequently plugged the flash memory stick into a USB port on a desktop machine running Windows XP SP2. I also connected the 6680 to another USB port using the DKU-2 cable. After starting PC Suite 6.70.22, I clicked on the Get Connected! Button to get connected to my 6680. I then clicked on the Backup icon to load the Content Copier Program and clicked on the Restore button. On the next screen headed “Select back up file to be retored” I browsed to the folder on the flash memory stick containing the file “Nokia 7250i contacts 15-12-2005.nfc”, clicked on the checkbox labelled “Restore contacts, calendar etc” and clicked on the OK button.
The following warning message was displayed :-
You are about to restore contents from another phone model than the connected phone.
Some content might not be restored.
and I clicked on the OK button.
Then the following warning message was displayed :-
This backup file has been made from a phone that uses a different language than the target
phone.
To make sure that your phone and Nokia PC Suite applications function properly, it is
recommended that you restore the backup files only in phones that use the same language as
the source phone.
and I clicked on the Cancel button which caused the initial Content Copier screen to be displayed.
I think it is totally unacceptable that PC Suite 6.70.22 Content Copier cannot correctly process the files created by PC Suite 5.8 Content Copier.
Please reply if you agree with me.
Has anybody successfully transferred contacts between mobiles using the same or similar procedure as I have described above ?
If so, what did you do that was different ?
Does anybody know whether Content Copier’s .nfb backup file format is compatible between PC Suite 5.8 Content Copier and PC Suite 6.70.22 Content Copier ?
Before I report this problem to Nokia, has anybody reported this problem to Nokia previously ?

Yes, I am aware I can connect my 7250i to pc suite 6.7 to transfer all the data from the old phone to the new one.
But I think you missed the point.
I was attempting to use the resources I had without any further expenditure on hardware.
The 7250i has an infra red and USB connection but I do not posses a DKU-5 USB cable for it.
I was quoted around £29 for a new DKU-5 cable, although I have recently discovered that they sell for much cheaper on eBay.
The only computer I have with an infra red link is an old Sony laptop running Windows 98SE. Sony are probably the worst computer manufacturer for not providing the latest versions of Windows with the required Sony device drivers and the Sony utility programs for their old machines. Hence if I install Windows XP SP2 on the laptop from a retail CD, I lose some Sony functions/capabilities. So I am stuck with Windows 98SE, which means I have to use pc suite 5.8 as pc suite 6.7 cannot be installed on this laptop becuse it only runs under Windows XP SP2 ns Windows 2000.
As the 6680 mobile requires pc suite 6.7, I did this on a desktop machine running Windows XP SP2, but this machine does not have an infra red port. Hence my attempt to tranfer the .nfc file from the laptop to the desktop machine on the assumption that Nokia software developers would NOT be stupid enough to not provide backward compatibility.
I have been a computer programmer since 1966 and know that you must always provide backward compatibity even if this means providing another program to convert a file in an old format to a file in a new format.
I intend to lobby Nokia to do something about this and was hoping for support from others who have attempted something similar.

Copying Folders and Interuption Occurs

Hi,
I am trying to copy about 8gb of photo folders to a network drive. A pop-up comes up and says I can not copy because a file name is too long. It gives me no option to skip and continue. How can I pike up where I left off? When I click out the copy stops and closes.
Thanks

I have a few thoughts which may or may not help. There could be a corrupted file, or even one with a name that's too long. What type of network drive are you copying to? There's also the possibility of updating to 10.4.11 - perhaps there's something that has been fixed since 10.4.6 that's causing the problem. Booting form a CD/DVD and repairing the HD with DiskUtility wouldn't be a bad idea either.
Jeff

Content Copier freezes with N95

Hi there,
I just updated my software on my N95.
I did everything right and have been trying to restore the backup I made with content copier.
My problem is that it doesn't complete the restore and seems to stop at 68%. I thought that maybe it wasn't responding, but it was still running and seems to be responding normally.
The backup was successful, but I just can't restore it.
Any ideas? I have a lot of numbers and calendar entries on my phone that I need to get back. I thought I was doing the right thing by backing up my details, but I still seem to have lost it all.
Thanks for your help
Solved!
Go to Solution.

Hi there,
I managed to get my contacts back because I had luckily sync-ed my phone earlier. Though I had forgotten I'd done it.
I checked your way of doing it and found the calendar details (among a lot of other junk I had to sort through.)
I just did the PC sync again and it loaded them all back on (though I made a copy of my Outlook address book first, just in case)
I'll definately have to remember both ways. I'm just glad that I have got my numbers back. The calendar I can deal with.
Thanks

Content copier stops and freezes

Similar Messages

Maybe you are looking for