Content Copier wont restore after firmware upgrade

I upgraded my N95 8GB to the latest firmware this morning (30.0.018), took 2 complete backups using Contect Copier V4 prior to doing so, but after the upgrade every attempt to restore contacts, settings, etc has failed.
I've tried doing the recommended re-formatting procedure, followed by a restore, which did not help. I've tried restoring individual items only, instead of the whole lot, which also didn't work.
According to the log at the end of the restore, the restore completed successfully. Reality suggests otherwise though.
Could anyone please help?
Thanks,
Adriaan

Right, I've tried using OVI, which did NOT resolve the problem. In fact, it gave identical results to the content copier included with the nseries suite.
I've written to Nokia support who have replied as follows:
"In this instance, allow me to suggest a few workarounds in order to rectify the issue on hand.
First, I suggest that you delete any data not needed from your Nokia N95 8GB to free up the internal memory of your phone before restoring the backed up file. I would like to also suggest that you select the content files that you want to restore to the Nokia N95 8GB. Once you have connected your Nokia N95 8GB to the PC and launched the "Content Copier" application, please select the content file types that you want restored on the phone.
However, if you are still unable to restore the backed up file to your Nokia N95 8GB, there may be inherent issues with your Nokia N95 8GB that may prevent you doing so. In this case, please take your phone to your nearest Nokia Care Point for an assessment. The Nokia Care Point will assess if a repair is required and advise if this may be covered under warranty."
So it looks as if I'm going to have to take it in for repair...

Similar Messages

T1000 wont boot after firmware upgrade if SCA6000 is connected

Hi guys,
as u may have guessed from the topic, I had a T1000 server with a sun SCA6000 crypto card mounted in the PCI slot. All worked fine until i tryed to upgrade the firmware on the server to the last available release (6.7.8 with patch 139435-06 ) . After the upgrade procedure, the system did not boot anymore. This is the console output with POST after the poweron command:
sc> poweron -c
Enter #. to return to ALOM.
0:0:0>
0:0:0>Sun Fire[TM] T1000 POST 4.30.4.a 2010/01/06 15:23
       /export/delivery/delivery/4.30/4.30.4.a/post4.30.4-micro/Niagara/erie/integrated (root)
0:0:0>Copyright 2010 Sun Microsystems, Inc. All rights reserved
0:0:0>VBSC cmp0 arg is: 0fff0fff.00000211
0:0:0>POST enabling threads: 00000000.0fff0fff
0:0:0>VBSC cntl arg is: 0fff0fff.00000211
0:0:0>VBSC selecting POST MAX Testing.
0:0:0>VBSC setting verbosity level 2
0:0:0>Start Selftest.....
0:0:0>Master CPU Tests Basic....Done
0:0:0>Init MMU.....
0:0:0>L2 Tests....Done
0:0:0>Test Memory....Done
0:0:0>Setup POST Mailbox ....Done
0:0:0>Extended CPU Tests....Done
0:0:0>Scrub Memory....Done
0:0:0>Functional CPU Tests....Done
0:0:0>Extended Memory Tests....Done
0:0:0>IO-Bridge Tests....Done
2010-06-17 17:45:02.383 0:0:0>INFO:
2010-06-17 17:45:02.399 0:0:0>     POST Passed all devices.
2010-06-17 17:45:02.433 0:0:0>POST:     Return to VBSC.
2010-06-17 17:45:02.449 0:0:0>Master set ACK for vbsc runpost command and spin...
SC Alert: Host system has shut down.
SC Alert: Host System has Reset
JUN 17 17:45:22 ERROR: HV Abort: <Unknown?> (217f14) - PowerDown
SC Alert: Host system has shut down.
sc> Guessing an hardware compatibility problem, i tried to remove the SCA6000 board and the system booted again without an hassle.
Unluckily, I need the SCA6000, and I don't have any other server in which to mount it, so I tried to downgrade the firmware to the release I had before the upgrade:
firmware version: 6.6.7
patchid: 136928-05
but the system does not boot anymore with the SCA6000 connected. I even tried an older fw release just to be sure (fw 6.6.1, patch 136928-01), with the same result.
I did not find mention of any incompatibility in T1000 or SCA6000 documentation.
Any help would be REALLY appreciated
Many thanks in advance.

Hi,
This looks similar to the bug 6630313 :: http://sunsolve.sun.com/search/document.do?assetkey=1-1-6630313-1
As described in the bug document, it is due to lower f/w rev. on the SCA6000 and solution is to upgrade the crypto card f/w to 1.1.0 /1.1.0 (bootstrap/operational )or later.
Another workaround would be to install system f/w 6.2.4 or 6.2.8 which works well with crypto card f/w 1.0.4/1.0.7.
Copying relevant part of the document for ref.
=======================
Work Around: The card is recognized by obp and prtdiag with firmware 6.2.4, so at this point customer is using firmware 6.2.4 as workaround.
Customer's crypto card is currently running 1.0.4/1.0.7 bootstrap/operational firmware. Customer can upgrade the card to newer firmware such as 1.1.0/1.1.0 by moving card to a system that boots successfully such as Ontario T2000. After such upgrade, install the card back into T1000 which should boot successfully with sysfw 6.4.0, 6.5.5 or 6.5.11 posted on Sunsolve.
Another workaround is customer can downgrade the T1000 sysfw to 6.2.8 so they can boot with the crypto card. After the T1000 is up and running with sysfw 6.2.8, customer can upgrade the crypto card fw to the latest 1.0 patch on the T1000 itself, then upgrade the T1000 sysfw to the latest
version posted on Sunsolve. This workaround does require customer to have access to an Ontario T2000 system.
Another workaround is customer can downgrade the T1000 sysfw to 6.2.8 so they can boot with the crypto card. After the T1000 is up and running with sysfw 6.2.8, customer can upgrade the crypto card fw to the latest 1.0 patch on the T1000 itself, then upgrade the T1000 sysfw to the latest
version posted on Sunsolve. This workaround does not require customer to have access to an Ontario T2000 system.
========================
HTH
-Mehul

AppTRK wont install after firmware upgrade (N95)

Hello i have recelntly updated to the newest firmware and im having trouble whilst installing apptrk on the mobile i transfer it to the phone and when i start the installation i get to the part where you choose where to install the app but when i choose either the phone mem or the memory card i get an error saying that the component is built in and i need the trk app to be installed in order to install some other aplications that i also need very much
Thanks in advance...

You can't do anything.
The new firmware stops these sorts of programs working.
Mainly because they can be used to install illegal applications etc.
There is no way of downgrading your firmware either before you ask.

My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

I was having the same problem, I backed up my phone and then updated to iOS 5 and then it kept telling me it could not restore from my backup as it had failed. After reading a bunch of forums and posts and trying everything, I did manage to get it to work. I had tried the Time zone, creating a new computer user account, disabling anti-virus, etc.
It took a combination of things, one of which was disabling the anti-virus completely and copying the contents of the backup folder to my desktop and then deleting everything in the backup folder. Then I rebooted the PC, entirely disabled the anti-virus, copied the one backup I wanted to restore from the desktop to the backup folder and then trying to restore. Low and behold the phone said restoring from backup and I am back in business, so when in doubt, trying combining some of the fixes together.

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

Crippled 192.168.1.1 page after firmware upgrade

hi,
i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

It is good to know that the issue is resolved
After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

Ipad 2 wont restore after updating to ios 7

ipad 2 wont restore after updating to ios 7

Hello pinky03,
I would be be concerned too if I was not able to restore my iPad. If you have not resolved the issue, I recommend following the steps in this article for an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Best,
Sheila M.

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Content Copier cannot restore backup

Last night I backed up my phone with Content Copier
using PC Suite 6.84
On a Windows XP machine
For a N73 phone.
I then upgraded the firmware on my phone. And went to restore the backup. However, Content Copier (which I now understand why it's not named Content Restorer) cannot find the .nbu file. So I checked to see if the file was really there. And yes it is in the default location. So I decided to make a copy of it and place it in a separate location and try to browse to it. But no luck.
Odd thing is that the first page says " The latest backup from this phone was made 7/31/2007 22:18". Which tells me it knows the file is there.
So out of curiosity I tried backing up the N80 at the house. And same thing, it backs up fine and doesn't see the file to restore it. The next logical step was maybe PC Suite had a bad install I will uninstall and reinstall. Did..done...nope... neither phone can see the backup file made for it.
I have read many of the posts here and was able to restore my contacts using the Contact Transfer program. Which seems to see the files no problem. How do I get everything back to my phone?

Nope no crashes, no new software other than Software Updater. Which is currently not installed. And that did exist at the time but an old version.
Ok I just did something I HAD already tried...Simply double-clicking the backup file. I don't think I had done that since uninstalling and removing the registry entries though. But it appears to be working.
This doesn't explain why I still can't see the files when I browse for them or why they aren't seen in the default location. It restored everything but my
- Contacts (which had already been restored)
- Calendar and notes (none)
- Text messages (failed in the backing up process, but don't get me started and upon closer inspection it did restore my SMS)
- Multimedia messages(same)
- Emails(none)
Well I am going to be happy I got my files back...And hope that PC Suite has the bugs worked out before the N80 needs a new firmware. Thanks tons for your help.
PS I still haven't heard back from Nokia Support Department. Talk about Customer Service.

Toshiba 47M7463DG no Cloud service after firmware upgrade

Hi All,
I have a problem with my Toshiba 47L7463DG. The Cloud services (accessible from the Home button) stopped working after the recent firmware upgrade. Is there something I can do to roll back to the previous firmware version or fix this problem?
Details:
Toshiba 2014-051
May 21 2015
Software Version 8.1.97.09.01.1
MBoot Version 00813201
Shipout G
Thanks in advance.
hysten

Hello,
I have the same problem.
I have above mentioned TV since 3 months So far, everything was wonderful.
Yesterday an update is installed automatically.
After that all stations were adjusted and I no longer get into the cloud menu.
So if I press the button with the "house", nothing happens.
Wi-Fi is enabled and network test was successful. The Red button also works. So I'll be over in the individual libraries.
Three times I set back the TV .Without Success.
Once I was able to get into the cloud menu. When I went out of it and want into the menu again nothing happened.
I also can not access the contents of my USB flash drive.
The latest firmware is installed.
Did someone have an idea?
Thanks in advance
Jan

ZenV Plus STILL stuck in recovery mode after firmware upgrade

=Hi there,
My ZenV plus opened in recovery mode for no apparent reason... I have tried every option to try to fix it, including downloading and installing the firmware upgrade - this generated a message saying the upgrade was successful but the player will still only start in Recovery Mode after trying to reboot it. So what do I do next? Thanks in advance for any and all helpful suggestions.

AHi,
Can you please try resetting the ZEN V Plus to see if it helps?
To reset the player, use a pin to press the reset button.
Did this happen out of the blue?
Do you have any contents in the player? If you do, please remove them to see if the player is booting up properly.

Contacts etc. will not restore after an upgrade to...

I just backed-up my N95 then I upgraded to V11.0.026 (Vodafone). Now it will not restore this back-up or any back-up from previous months, it wont even sync with my N70 to get some numbers out of that!!!! Upgrading it was the biggest mistake I could have made, I only did it because of the constant lock-ups. Any ideas? Do I need to take it to Carphone Warehouse for a DOWNgrade??

I remember the backup being an issue after the upgrade to version 11. Mine backed up Contacts only and not Calendar. In fact I remember reading somewhere that it actually warned you about the backup issue before you did the upgrade.
Ericssson EH 237, Ericsson EH 337, Ericsson GH 388, Siemens S25, Nokia 6210, Nokia 7250, Nokia 6230, Nokia 6280 & O2 Atom , Nokia N95, Nokia 5800 XpressMusic

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

Content Copier wont restore after firmware upgrade

Similar Messages

Maybe you are looking for