Content Deployment Issues with MII 12.0

Hi everyone,
Our customer's on 12.0.6 (build 12). Recently we moved certain changes to production and since then we've been looking at a strange behavior where in, for ex. , if you open up one instance(on the browser) of the Production you still are looking at the older content while another instance reflects the changes.
We also made some changes to the Navigation which is reflected in both the instances.
We tried to check if the browser is caching pages (we carried out the tests on both IE6 as well as 7) but that does not seem to be the problem.
In my earlier experience this issue was in a clustered environment (MII on multiple JVMs) but I understand this was fixed with 12.0.3 onwards.
If anyone has some pointers , it'll be greatly appreciated.
We haven't tried a restart of the App yet , just wanted to check if we are missing anything.
Thanks
Udayan

Udayan,
have a look at the following note, where problems with clustered environment are solved for 12.0 SP09:
[https://service.sap.com/sap/support/notes/1409462]
Hope this helps
Michael

Similar Messages

Part 2: Flat files and Business Contents: Any issues with this scenario?

I will appreciate some clarification on the some points made in response to my previous post "Flat files and Business Contents: Any issues with this scenario?"
1.
" ...youd better analyze those cubes for data redundancy and presence of data youll never use. " I will appreciate some clarification on the type of analysis you are referring to. Examples will help.
2.
"If you want to combine several found IOs in your custom dataprovider, then again you must know (or figure out) relationships between these IOs." I will appreciate some clarification on the type of relationship you are referring to. Examples will help.
3.
I am a bit confused with "..include into ODS structure ALL fields required for the cube" but you also noted noted that "...except navigational attributes and chars and KFs that are going to be determined in TRs or URs."
If you exclude ALL these, haven't you excluded all the fields you included in the ODS structure?
4.
"Consider carefully the ODS key fields selection. Their combination should not allow data aggregation that you dont need."
I may be missing the point here, I understand that you need to select the fields which will form the unique ID for the records in the ODS under the Key Field (please correct me if I am wrong with the purpose of the Key Field), but I don't understand the discussion of "aggregation" in the context.
Thanks in advance

Hallo
I try to give some exaplanation based on the previous answer.
1. Data redundancy - make sure you do not store the same information. does not make sense to have data redundanty across you Data Warehouse. this is also a cost. just sotre the same information one time if you get all what you need.
2. whatwhever you build you dp, which consist of IO, you need to know with kind of relation (1:1 or 1:n - n:n and so on) exist between them. that will help you when you model you infoprovider. For example I would never pit togheter IO (n:m) in the same dimension if you expect an high number of cardinality. Sometime an IO can be an attribute of another one (depend on relation. For example
Business Partner and his Address. Usually you have a relation 1:1, in this case address is an attribute of BParten and store it in the Masterdata instead then DP
3. Sometime when you load from ODS to CUBE, you can fill some IO (which are in the infocube and not in the ODS)through ABAP routine in TR-Start Routine of Update Rule. Does not make sense to include these IO in the ODS as they are NULL or Blank (the deault value). This can happen when for example, you first load in the ODS (Price and Quantity) and then you calculate Sell price later (Price * Quantity). of course it could be doen also in the Bex. Depends on other factors (Performance - Loaidng -Sizing)
4. Make sure that the KEY definition of ODS is accordingly to the data otherwise you will aggregate the data and later maybe if you need the detail you miss it.
for example: customer - product - Distr Chan - Sell Price
if each Customer can buy each product for any Distrution Channel, then when you build your ODS(Customer - Product and Distribution must be KEY) otherwise (if you have only Customer - Product KEY for example) you will lose the details for Distribution Channel.
I hope eveyrhting is clear
Regards
Mike

Deployment issue with Planning & EPMA 11.1.2.0

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I ahve installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Did you reconfigure the web server after you finished configuring all of the products?

Deployment issue with EPMA & Planning in 11.1.2

Hi
I installed the following applications of Hyperion suite:
Essbase
EPMA
CalcManager
Planning
During configuring i configured each product separately since i wanted to configure separate DB for each of them.
The configuration went with no issues. But now when i log-in into workspace and go to Navigate, i only see administer.
There is no option for EPMA and Planning applications.
Did i miss any step?
I have used IIS as my webserver because Oracle HTTP gave me some error while deploying (unable to initiate OPMN). Is it some issue with IIS
I have installed my applications on Win XP SP3, IIS 5.1 and its a 32bit machine

Hi
Please redeploy only the Web Server under shared service. It has to be redeployed once EPMA and others are configured.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

Content distribution issue with message "Found package properties updated notification for package '00000123'"

I've got strange issue with 1 of my primary sites that started just recently. I've updated the content of 1 package and this now needs re-distribution to all DPs. I've got 3 primary sites and on 2 of those the update succeeded and my DP's got
updated correctly. One primary site it does not work and checking distrmgr.log I can see following message every xx minutes
Found package properties updated notification for package '000008B7' SMS_DISTRIBUTION_MANAGER 6/21/2014 12:00:31 AM 5836 (0x16CC) ==>
Checking Pkgxfermgr.log does not show anything either, I've tried with 2nd application but again the same result it only shows the the notification message.
I saw similar issue yesterday but with restart of the sms_exec service it eventually distributed the content, obviously this is not something I like to do too often.
does anyone have idea what this could be, suggestions are welcome. Thx.

Jason, I've checked the flow from the CAS down to the primary below is quick overview. The package I'm testing is just small package that we use to check replication is working in our environment it's less then 1MB in size and we run it
1/week basically update content and then check monitoring-content distribution that it has been received on our 260 DP's around the globe
CAS (Located in the US EST Time zone)
Distrmgr.log 11:25am update package and needs to be send to 3x primary sites (A00; B00; C00)
sender.log 11:30am all 3 primary sites have received the content.
C00 (Primary site in Singapore having the issue)
distrmgr.log 11:27pm received notification of the package
despool.log 11:32pm packaged content extracted successfully
distrmg.log started to see message Found notification for package '000008B7' and followed by next message
Package '000008B7' (priority 2) is already in queue.
This goes one until 1:21am (Singapore time)
Start updating the package 000008B7... SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
The Package Action is 1, the Update Mask is 160 and UpdateMaskEx is 0. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Use drive G for storing the compressed package. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Successfully created/updated the package 000008B7 SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SG-INTRA100.na.pg.com SITE=C00 PID=10132 TID=8296 GMTDATE=Fri Jun 20 17:21:45.848 2014 ISTR0="000008B7" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="000008B7"
After that nothing anymore.
When I check monitoring - content distribution I can see the package being updated/distributed to 80% of my DP's and last 20% are the dp connected below this Primary site.
To add to the confusion, there was another package distributed around the same time, and then one actually made it to the remote DP's.
This is first time I see this issue.

Jdeveloper Deployment issue with OC4J

I am using JDEVELOPER with Standalone Version of OC4J. I am trying to deploy the application EAR file generated using JDEVELOPER deploymnent wizard in to Standalone instance of OC4J. I am having issue with the Application server connecton wizard.
I do not know the 'admin' password of the OC4J standalone instance. I am able to start the instance with 'java -jar oc4j.jar'. I am able to access the instacne with
http://localhost:8888.
I am having issue with the Application server connecton wizard. It requires 'admin'
password to create a connection with the app server. The deployment could not succeed without the password.
I would appreciate feedback and suggestons.
Thanks.
Palani

This will reset the password to welcome for you (I've had this problem too - it happens if OC4J doesn't shutdown properly)
java -jar oc4j.jar -install
Enter an admin password to use: welcome
Confirm admin password: welcome
Installation done

Sharepoint 2013 Content Deployment Issue

I configured content Deployment from source farm to destination. The content is migarated from source to destionation and updates are went well. But when i update the attachement in Source, it is not getting updated in destination. I can find the below message
from import log
[2/18/2015 3:49:03 PM] [ListItem] [1_.000] Warning: Cannot add attachments because: The specified name is already in use.
The document or folder name was not changed. To change the name to a different value, close this dialog and edit the properties of the document or folder.
Please suggest me

Hello,
Looking at the last error message:
"The remote upload Web request failed"
there are a couple of possible reasons for this.
1. No space available on the destination web server
There needs to be enough disk space for the content to be uploaded to on the destination server. This is done in two stages - the first stage zips and copies the content to the destination server, and the second stage extracts the zip files and adds the
content to the destination server. You need enough space on the destination server to store the zip files and the extracted content.
2. Permissions on the destination server
The content deployment job needs to use a security account that has permission to the destination server farm to perform the deployment task.
3. Firewall/network settings
The destination server needs to be accessible by the source server.
Regards,
Gavin McKay

Deployment Issue With NetBeans4.1Beta

Ok Here is the issue...
I'm running SAS8 & NB4.1B on a windows server 2003 machine, j2se version is J2sdk1.4.2_07
I have been trying to build and deploy a simple hello world application with a single JSP file. I can do this no problems with the bundled Tomcat However SAS8PE throws the following error:
Here is step by step what I do...
File > NewProject > Web > Web Application
give it a unique project name, leave source structure as java BluePrints, leave server as SAS8PE, leave J2EE version as 1.4, leave context path as "/$projectname", leave set as main project checked...
click finish...
Build the project by Build>Build Main Project
This completes successfully (Just built an empty project with no coding...should return the empty standard jsp file when run)
And then I run the project by Run > Run Main Project and I get the deployment error on deployment processor monitor message box with the following info:
Deployment error: null. See the messages.log file for details.
Here is the contents of my output window after the error:
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
library-inclusion-in-archive:
library-inclusion-in-manifest:
compile:
compile-jsps:
do-dist:
dist:
run-deploy:
Deployment error: null. See the messages.log file for details.
C:\java\nbprojectfolder\nb41Beta\deneme\nbproject\build-impl.xml:355: Deployment error: null. See the messages.log file for details.
BUILD FAILED (total time: 2 seconds
When I click the hyperlink to the build-impl.xml file I get the red line at precisely the following message:
<target name="run-deploy" depends="init,compile,compile-jsps,-do-compile-single-jsp,dist">
<nbdeploy forceRedeploy="${forceRedeploy}" clientUrlPart="${client.urlPart}" debugmode="false"/>
</target>
By the way this is at the execution section of the build-impl.xml file
I have tried re-installing everything and I still get the same error... Shouldn't this be a straightforward with no hassles task? Anyone else had the same problem as I did? What do you suggest I do at this point?
Thanks...

Another issue is when I try to deploy the simple war file under /dist thru the admin console (web applications > deploy) I get the following error...
A "com.sun.enterprise.tools.guiframework.exception.FrameworkException" was caught. The message from the exception: "java.lang.reflect.InvocationTargetException while attempting to process a 'error' event for 'deployWebModule'."
The root cause is "javax.management.AttributeNotFoundException: id"
See the HTML source for more detailed (stack trace) information.
The stack trace is as follows

Deployment Issues with Custom TS variables set for client

Good Day folks!
I have come across an interesting issue that I have not been able to find a quick fix as such I am looking for some ideas where to trouble shoot my issue moving forwards.
So the Issue:
I have a TS that deploys a Windows 8.1 SOE image, this is done first by using a PXE boot PE image for an “unknown” systems to load a Custom HTA. This HTA allows me manually add the system to SCCM and add it to a required deployments collection that has the
8.1 SOE deployed to it.
The HTA also sets a few custom variables for the system resource things like system location, Machine Domain etc.
Once the HTA has run the system then has a delay to allow for the resource to show up tin the 8.1 deployment collection and then closes.
Now all this appears to work fine, the system is added to the collection, reboots and the deployment runs from start to finish without error.
I can also check the system resource and the variables are present.
The problem I have found is that the custom variables for this resource are not being used by the TS after reboot.. upon further investigation I found that these variables are not even being retrieved ( ran a VB script to save all the variables from the
TS to a txt file to check this ) Because of this the TS is bypassing some needed TS Tasks.
A few interesting things to note:
System appears to be added again when AD discovery is run…. So it causes a Duplicate.
Client Dose connect to SCCM server after deployment but is not receiving deployments ( is getting some policy )
Worked with SCCM 2012 but not 2012 R2
So it appears that when the system reboots from the HTA PE step it has identified itself as an unknown system again…. Even though it has been manually added…
I am interested to know if first of all if others would agree with this and second how SCCM while running a TS matches itself up to a system to retrieve the custom set variables before client install etc... Or a good place to start looking
to dig up more information! Or anything else!
Thanks
Stuart.

Have you taken a look at this hotfix?
http://support.microsoft.com/kb/2907591
We had to apply it in order for our variables to be seen.
joeblow

Deployment Issue with Rules file

Hi,
We have Rules file issue after the deployment in Development and Re7 environment.
We have modified/created the rules file and after the deployment if we execute the rules file from the treatment then we got the error message like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file
"/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error
write to "/pgcre701/pgc/trc/PGC_150310_103739_pgc_nature_for_data_che.err";
ERROR - 1019006 - Unable to Read
[/logiciel/epm11/user_projects/epm_inst4/EssbaseServer/app/PGC_CHE/Pgc_che/DO_MX_05.rul], Created Using A
Previous Version.
ERROR - 1241101 - Unexpected Essbase error 1019006.
If the same rules file opened through EAS console from SVN trunk or local and save as this rule file into Essbase server(through EAS console) then the rules file working correctly from the treatment process launch like mentioned below.
MAXL> Import database PGC_CHE.Pgc_che data from data_file "/pgcre701/pgc/subsidiary/che/tfi/pgc_nature_for_data_che.txt" using server rules_file "DO_MX_05" on error write to "/pgcre701/pgc/trc/PGC_150310_134622_pgc_nature_for_data_che.err";
OK/INFO - 1019061 - Reading Rule SQL Information For Database [Pgc_che].
OK/INFO - 1019025 - Reading Rules From Rule Object For Database [Pgc_che].
OK/INFO - 1003040 - Parallel dataload enabled: [1] block prepare threads, [1] block write threads..
OK/INFO - 1003037 - Data Load Updated [18800] cells.
OK/INFO - 1003053 - Data Load Elapsed Time with [DO_MX_05.rul] : [1.16] seconds.
OK/INFO - 1241113 - Database import completed ['PGC_CHE'.'Pgc_che'].
Could you please help us on this point ?
Thanks in advance for your help.
Essbase server 11.1.2.3.501 server LINUX red hat

Hi John,
it's not quite that
I will provide more detail:
In fact, we are 3 server Essbase : development, acceptance and operational there are a lot the new version of Essbase 11.1.2.3.501.
The maxl treatment are launch since a other server : a treatment server that are a client maxl and ESSCMD in the same version.
Before that, I'm migrate all the application and database from all alder server Essbase to this new architecture Essbase.
All application and DATABASE (in BSO) was migrated by expot-import process, the all object (csc, rul, rep ...) was transfer by copy in each directories of database.
The test after migration are very satisfying.
Now, we are on process of life on the Essbase server 11.1.2.3.501.
The back office of India used the usually process to developed the lot.
They take the source on SVN application (take the rule), deployed the rule on the development server, modify the rule and have this error.
This error not appear after migration with the same rule ...
I am skeptical
Tx to your help on this subject.

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Deployment Issue with MDM Java API exposed as Webservice using EJBS

Hi Experts,
I am implementing MDM Java APIS in Stateless session bean.Exposed that bean as Webservice and using that webservice in
Webdynpro through Adaptive Webservice Model.
I am facing following issue:
Webservice works fine after deployment,after some number of execution webservice stops working and gives exception.After
Redeployment of the Webservice, it starts working again works fine some number of execution.
I am Using new MDMJava API.
MDM Server Details: MDM 5.5 SP06
I am using following code for connetion
//////////////*************Getting Connection************///////
          ConnectionPool pool = null;
          String sessionId = null;
          try {
               pool = ConnectionPoolFactory.getInstance("Server Ip");
          } catch (ConnectionException e1) {
               System.out.println(e1.getMessage());
//////////////*************Repository Session************///////
CreateRepositorySessionCommand repSeession =
               new CreateRepositorySessionCommand(p_pool);
          repSeession.setRepositoryIdentifier(p_repId);
          try {
               repSeession.execute();
          } catch (CommandException e2) {
               System.out.println(e2.getMessage().toString());
          String repIID = repSeession.getRepositorySession();
          //     Authenticate Repository
          AuthenticateRepositorySessionCommand autRepSeesion =
               new AuthenticateRepositorySessionCommand(p_pool);
          try {
               autRepSeesion.setSession(repSeession.getRepositorySession());
               autRepSeesion.setUserName(p_user);
               autRepSeesion.setUserPassword(p_Password);
               autRepSeesion.execute();
          } catch (CommandException e3) {
               System.out.println(
                    "RepSession Seesion" + e3.getMessage().toString());
          return autRepSeesion.getSession();
//////////////*************user Session************///////
GetRepositoryRegionListCommand regionListCommand =
               new GetRepositoryRegionListCommand(p_pool);
          regionListCommand.setRepositoryIdentifier(p_repId);
          try {
               regionListCommand.execute();
          } catch (CommandException e) {
               System.out.println(e.getMessage().toString());
          RegionProperties[] regions = regionListCommand.getRegions();
          //                                 create a user session
          CreateUserSessionCommand UsersessionCommand =
               new CreateUserSessionCommand(p_pool);
          UsersessionCommand.setRepositoryIdentifier(p_repId);
          UsersessionCommand.setDataRegion(regions[0]);
          // use the first region
          try {
               UsersessionCommand.execute();
          } catch (CommandException e) {
               System.out.println("UserSession" + e.getMessage().toString());
          String UsersessionId2 = UsersessionCommand.getUserSession();
AuthenticateUserSessionCommand authUserCommand =
               new AuthenticateUserSessionCommand(p_pool);
          authUserCommand.setSession(UsersessionCommand.getUserSession());
          authUserCommand.setUserName(p_userId);
          authUserCommand.setUserPassword(p_password);
          try {
               authUserCommand.execute();
          } catch (CommandException e) {
               System.out.println("User Seesion" + e.getMessage().toString());
          return authUserCommand.getSession();
//////////////*************Destroy Session************///////
     DestroySessionCommand destroySessionCommand =
               new DestroySessionCommand(p_pool);
          destroySessionCommand.setSession(p_repsession);
          try {
               destroySessionCommand.execute();
          } catch (CommandException e) {
               e.printStackTrace();
          destroySessionCommand.setSession(p_Uesrsession);
               try {
                    destroySessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
Do we need to relase the connection pool object also?
Can anyone help me with the code how that can be achived?
Please Reply if anyone has come accross similar issue or know what can be the solution.
Thanks in Advance.
Regards Shruti
Edited by: Shruti Shah on Dec 18, 2008 12:52 PM

Hi Nitin,
Thanks for the prompt Response.
Even I am guessing that its becose of Connection pool.
I am destroying session as follows
               DestroySessionCommand destroySessionCommand =
               new DestroySessionCommand(p_pool);
          destroySessionCommand.setSession(p_repsession);
          try {
               destroySessionCommand.execute();
          } catch (CommandException e) {
               e.printStackTrace();
          destroySessionCommand.setSession(p_Uesrsession);
               try {
                    destroySessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
But I didnot find any method by which i can close realsse connection from connection pool.
It would be great if you can help me how close or realese those connection.In MDM Console i am able to see those sessions even after destroying them.
Regards Shruti.

Cisco security manager deployment issue with invalid command

Running CSM 3.3.1, to manage an 800 series pre-configured router.
The router has a number of policy ACL's and class-maps configured. When the config is imported to CSM a number of warnings are seen reporting that some of the interfaces are unprotected by ACL's, which is correct, no serious errors are reported and the device is succesfully imported.
But, when I look at the configuration within CSM non of the ACL's or the class maps are shown.
Also, when I configure some feature on the router, during the deployment phase I get an error indicating that there is an invalid protocol under one of the class maps associated with an interface. The protocol in question is bittorrent. This error prevents depolyment of my changes. In fact this causes my client to hang, eventually if I close the application windoes reports that the issue is caused by javaw.exe faiing to respond.
If I take out the bittorrent protocol under the class map then all seems well.
So, I though flexconfigs would resolve this, enabling me to import the config with the unsupported command. I created a flexconfig with the class map and the invalid protocol. When I re-imported the device there is still a lot of configuration features that are on the router but are missing in CSM.
I'm not sure how to resolve this, the router was not configured through CSM in the first place.

Update to this, the CSM is also altering firewall configurations, if I import a configuration from an ASA running 8.0.4 code, then compare that configuration to that running on the same ASA there are quite a few differencies. Some of these are not items that CSM reports as requiring Flexconfig support, which concerns me.
This is not the first time I've seen this occur, customer is concerned about the reliability of the way this system handles configurations, and I cannot explain why it exhibits this process.
Anyone else seen this, and found a work around?

Deployment issue with SOA - OSB 11g environment

Hi,
We have Dev Environment configured with SOA 11g (11.1.1.4) and OSB 11g (11.1.1.4) on a single weblogic domain. Developed SOA composite app and deployed to the SOA Server. We are exposing our SOA Composite thru OSB ( created osb proxy and business services and accessed soa composite from the client. It s working fine ) layer for the client to access it. The issue here is while deploying it to the production environment (configured OSB and SOA in two separate WL domain) located offshore.
What i saw from the soa doc is that we need to deploy SOA composite to the SOA Server and OSB Configuration to the OSB Server.
but the offshore person is asking us to deploy both SOA composite & osb to the same OSB Server as an .ear file.
Is it possible to deploy both SOA composite & osb to the same osb server ? is there any document on project that involve both soa and osb.
please guide me how to do the deployment
I appreciate all your help.
thanks
sumesh.j

I am wondering if could able to solve the problem of deploying both SOA composite & osb to the same osb server. Even I am facing the same problem....
If you could able to solve the problem then please let us know the steps that you have followed to solve the same.

LOB Appx Deployment issue with Configuration Manager 0x80073CF9

Hi,
trying to deploy a ModernUI LOB App with Config Manager 2012. After downloading the content to ccmcache, installation starts and ends up with error message 0x80073CF9.
AppDiscovery.log:
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5" AND Revision = 1)"
AppDiscovery 23.04.2015 14:01:11
6148 (0x1804)
Performing detection of app deployment type SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5, revision 1) for user.
AppDiscovery 23.04.2015 14:01:11
6148 (0x1804)
Working with Package: 0bbc1bc5-a8eb-4bc0-9fbe-2a6141b7c835_2015.416.1305.4090_neutral_~_vv150cwvqh76c
AppDiscovery 23.04.2015 14:01:11
6148 (0x1804)
+++ Application NOT Discovered [AppDT Id: ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5, Revision: 1]
AppDiscovery 23.04.2015 14:01:12
6148 (0x1804)
+++ Did not detect app deployment type SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5, revision 1) for S-1-5-21-2924055433-2284826678-407803137-85917.
AppDiscovery 23.04.2015 14:01:12
6148 (0x1804)
ActionType - Install will use Content Id: Content_c458dc52-e321-40be-ab2f-a4599c387c7b + Content Version: 1 for AppDT "SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)" [ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5],
Revision - 1 AppDiscovery
23.04.2015 14:01:13 6148 (0x1804)
ActionType - Install will use Content Id: Content_c458dc52-e321-40be-ab2f-a4599c387c7b + Content Version: 1 for AppDT "SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)" [ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5],
Revision - 1 AppDiscovery
23.04.2015 14:01:13 6148 (0x1804)
Method EnforceApp failed with error 80073CF9
AppDiscovery 23.04.2015 14:01:15
6148 (0x1804)
CAppProvider::ExecMethodAsync failed. Error 80073cf9
AppDiscovery 23.04.2015 14:01:15
6148 (0x1804)
CITaskMgr.log
Initiating task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 (SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)) for target: S-1-5-21-2924055433-2284826678-407803137-85917,
consumer: {9C03F93F-11ED-4E9A-B3C0-C2CB8F056002}
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Initiating content download : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Contents already available. CITaskMgr
23.04.2015 14:01:13 6940 (0x1B1C)
Contents download already in Success state : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (Success), Param(0) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (Success), Param(0) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Already completed state (Success) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.ContentDownload)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Release task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {9C03F93F-11ED-4E9A-B3C0-C2CB8F056002}
CITaskMgr 23.04.2015 14:01:13
6616 (0x19D8)
Release task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/Application_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {A542B598-30EC-4690-A462-4EA1958EA7C6}
CITaskMgr 23.04.2015 14:01:13
6616 (0x19D8)
Release task ContentDownload for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/RequiredApplication_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {F0354997-44B3-428F-9F46-2D7FF9EE5933}
CITaskMgr 23.04.2015 14:01:13
6616 (0x19D8)
Initiating task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 (SicherUndWeg.Windows - Windows app package (*.appx, *.appxbundle)) for target: S-1-5-21-2924055433-2284826678-407803137-85917,
consumer: {0FC6DA00-8B41-458A-BDF2-130128CAFF57}
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Submitted new MTC request 0a4ea4a5-a0b6-4c41-95a4-0f89861f545f
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (WaitSerialize), Param(0) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
State transition to (WaitSerialize), Param(0) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:13
6940 (0x1B1C)
Sending ack to MTC for task 0a4ea4a5-a0b6-4c41-95a4-0f89861f545f
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
Starting Enforcement : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
Initiated application enforcement. : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
State transition to (InProgress), Param(0) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
State transition to (InProgress), Param(0) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:13
6604 (0x19CC)
Application enforcement completed : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
Enforcement completion state Failure : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
State transition to (Failure), Error(0x80073cf9) : CITask(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.S-1-5-21-2924055433-2284826678-407803137-85917.Install.Enforce)
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
State transition to (Failure), Param(-2147009287) : CTaskConsumer(ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1.{3C50E03E-1849-4371-820E-695BD2986F91})
CITaskMgr 23.04.2015 14:01:15
9060 (0x2364)
Active enforcement task with MTC Id 0a4ea4a5-a0b6-4c41-95a4-0f89861f545f not found
CITaskMgr 23.04.2015 14:01:15
5632 (0x1600)
Release task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/DeploymentType_3838926b-1593-41aa-bec7-f57b8df37ee5.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {0FC6DA00-8B41-458A-BDF2-130128CAFF57}
CITaskMgr 23.04.2015 14:01:15
2972 (0x0B9C)
Release task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/Application_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {550FED48-B73A-4CDA-9CCD-895F4A39BE60}
CITaskMgr 23.04.2015 14:01:15
2972 (0x0B9C)
Release task Enforce for CI ScopeId_11FA4582-378A-44FF-ADF8-174A38635DF5/RequiredApplication_0e314ec1-b991-4c77-a980-58183b18d83f.1 for target: S-1-5-21-2924055433-2284826678-407803137-85917, consumer {C47690C7-AD25-496D-9880-96439013C199}
CITaskMgr 23.04.2015 14:01:15
2972 (0x0B9C)
Any Ideas?

Are you using Windows 8 Enterprise? If so, did you configure the AllowAllTrustedApps
key?
For more information see:
http://blogs.technet.com/b/ryanan/archive/2014/05/16/sideloading-windows-8-appx-applications-via-configmgr.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Content Deployment Issues with MII 12.0

Similar Messages

Maybe you are looking for