Content distribution in SCCM 2012, Will the application be installed automatically?

Lets suppose If I have not distributed the content before the deployment
and it got failed to deploy and in later time if I distribute the content will it get installed automatically (which I don’t want obviously), or will that be based on required or available deployment settings?

Why would you not want the deployment to be enforced automatically after distributing the content?
Exact behavior in this scenario is dependent upon your settings; however a deployment cannot be both available and required. It is one or the other. There is however an available time and deadline time in required deployments. Deployments are enforced at
the deadline time -- the available time in required deployments is simply when the content will begin downloading and when the deployment is visible on the client. Available deployments are never enforced automatically.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Will the Application Scope be shared across the cluster in a multi-node OC4

Hi,
I have the following requirement:
Users of the application can only have single (browser) session. When a user who already has a session connects again, he should no longer be allowed to access the older session.
My proposed implementation is:
- After successful login – possibly using a Session Listener - an entry is made in a HashMap UserSessions that lives in the application scope. Key is the username, value is the session id (HttpSession.getId()).
- For every request, using a ServletFilter, we check whether the session is still in the UserSessions HashMap for the current user. If a new session has been created for the same user, the session id for that new session is in the UserSessions map and the servletfilter will not find the session. In that case, the filter should invalidate the session and forward to the user to an error page.
However, the application will run on a multi-node OC4J cluster. I am starting to wonder:
Will the Application Scope be shared across the cluster in a multi-node OC4J environment?
I know session state can be shared. But what application state/scope?
Does anyone know? Do I have to do anything special in the cluster or the application to get this to work?
Thanks for your help.
Lucas

gday Lucas --
Application scope is not replicated across JVM boundaries with OC4J.
I'm sure this used to be described in the doc, but I can't find it now from a quick scan.
If you wanted to use this type of pattern, you could look to use a Coherence cache as distribution mechanism to share objects across multiple JVMs/nodes.
-steve-

Tried to install a new game but got error message "You can't open the application "XIII Install" because PowerPC applications are no longer supported." I have since read that Yosemite doesn't have the program. What can I do?

Tried to install a new game that I bought (Xiii) for my MBP. All system req have been met and exceeded, however when trying to install it I get an error message saying "You can’t open the application “XIII Install” because PowerPC applications are no longer supported."
I have since read online that the operating software Yosemite has got rid of PowerPC applications, meaning I can't install my new game.
Is there anything simple that I can do to get this game to work. I'll be gutted if not as I have opened the game therefore the shop will not give a full refund, I'm sure .
Regards
Simon

A lot longer ago than that. PowerPC apps haven't been supported since Lion, 10.7.x.
You may have just purchased the game, but the developers obviously haven't kept up to date with the requirements for newer versions of the Mac OS.
You have three options, depending on how old your Mac is.
1) If it were ever able to boot directly to Snow Leopard, you could create a separate partition and install SL onto that partition. Make sure to turn on the option during the installation to install Rosetta. That is OS X's PPC emulator.
2) If your Mac is too new to install Snow Leopard, then you can purchase and install Snow Leopard Server within a VM, such as Parallels, VirtualBox, or Vmware.
3) Use a separate older Mac for running outdated software.

TS1702 Whenever i download any application, i got this message-" the application not installed on the iPhone because an unknown error occurred (0xE800000C)"...Please give me some solutions to resolve this issue..

Whenever i download any application, i got this message-" the application not installed on the iPhone because an unknown error occurred (0xE800000C)"...Please give me some solutions to resolve this issue..

Read here:
http://support.apple.com/kb/TS3221

We are buying a Mac, will the Apple Store transfer our files from the PC to the new Mac? Also, will the Apple store install Microsoft Office when we purchase it?

We are buying a Mac.
1- Will the Apple Store transfer the files from the PC to the Mac?
2- Will the Apple Store install Microsoft knowing we have to purchase it first.

Will the Apple Store transfer the files from the PC to the Mac? Yes
Will the Apple Store install Microsoft Office for Mac 2011? Yes

When Lion officially comes out from the Mac App Store, I understand that I can just buy it from there. However, will the laptops have Lion automatically? Or does it come with Snow leopard still.

When Lion officially comes out from the Mac App Store, I understand that I can just buy it from there. However, will the laptops have Lion automatically? Or does it come with Snow leopard still.

The ones sold that day will come with Snow Leopard most likely but they will be able to get a free upgrade to LIon if they apply within 30 days. Hardware coming through the supply chain from the day of the announcement will have Lion installed so it depends what stock people have to move before buyers see those.

Will The Genius Bar Install Snow Leopard in 2014?

I have an intel-based MacBook Pro from 2009 (I think) that is running 10.5 and I'd like to upgrade to Mavericks.
If I make a genius bar appointment, will the tech there install Snow Leopard for me (I'd pay for Snow Leopard) as opposed to me ordering a disk from Apple?
Thanks,
K

Call them and ask, although they may not have the retail media available (and otherwise would only install it for you if part of a hardware repair and if that was the original OS for your machine). Either way, they will charge you for the media, and if they do it, they will likely charge for time as well.
The disc is only $20 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard and its not hard to upgrade yourself. Just make sure, as always, to make a full backup before attempting any system changes.

That application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed

what is the problems?

Hi windows phone app can not debugging,
>>that application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed.
Based on the error information, it seems that you are trying to deploy the application on the Windows Phone Device. Then what Windows Phone OS are you using? Can you run
the application by using the Windows Phone Emulator?
For deploying the application on the Windows Phone Device, first please try to make sure you have registered your phone for Windows Phone development. For more information, please refer to:
https://msdn.microsoft.com/en-us/library/windows/apps/ff769508(v=vs.105).aspx .
After that please try to make sure that phone screen is unlocked and the project you want to run is set as the default Startup project.
Besides, please try to refer to the following article about how to deploy and run apps on a Windows Phone device:
https://msdn.microsoft.com/library/windows/apps/ff402565(v=vs.105).aspx#BKMK_device .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SCCM 2012 CU2: Download application stay at 0%

Hi,
Since a few days, I'm no more able to install a new packaged application. The older packages are still working and I can install it correctly.
When I try to install a new package on a client from the software center the download stay at 0%.
In the following log I found that:
DataTransferService.log:
[CCMHTTP] ERROR: URL=<my_server>:80/SMS_DP_SMSPKG$/Content_a0639914-557d-47dd-8ab5-3578e9cae125.1, Port=80, Options=224, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
Successfully sent location services HTTP failure message.
Error sending DAV request. HTTP code 404, status 'Not Found'
GetDirectoryList_HTTP('http://<my_server>:80/SMS_DP_SMSPKG$/Content_a0639914-557d-47dd-8ab5-3578e9cae125.1') failed with code 0x87d0027e.
I use SCCM 2012 R2 CU2 on windows 2008 R2. In the monitoring tab, I see that the package has been correctly distributed and deployed. I try to redistributed the application but nothing change.
When I open the URL from the log in firefox, I also got the 404 error (http://<my_server>:80/SMS_DP_SMSPKG$/Content_a0639914-557d-47dd-8ab5-3578e9cae125.1)
My DP is configured in HTTP and I allow the client to connect anonymously.
My Boundaries typs is "Active Directory Site"
I try to rest IIS with the command "IISRESET"
The services "IIS admin Service" and "World Wide Web Publishing Service" are started.
The Physical path of the "SMS_DP_SMSPKG$" is also correct.
I verified that the files are correctly copied on the DP after the distribution.
I read a lot of blog about this king of problem but nothing help, any suggestion to resolve the problem?
Many thanks in advance!

Hi Joyce,
Thanks for the reply. I don't find any error on the ISS log. The only one thing that I found and that I dont understnd is:
"<ip_server> PROPFIND /SMS_DP_SMSPKG$/Content_a0639914-557d-47dd-8ab5-3578e9cae125.1 - 80 - <client_ip> SMS+CCM+5.0 404 0 0 1402 3"
I try to redistribute and and validate it. For SCCM everything is ok but it still not working and I got the same error in "Datatransferservice.log". In "distmgr.log" there's no error.

Understanding background work for software distribution in SCCM 2012

Hi Team,
1.I want to know site to site communication for SCCM 2012.. and
2. want to know about package transfer to secondary site or content share background process.
3. In many of the content share server 200 package out of this 90 still showing inprogress.. I checked distribution point but no error.. I checked conponent status " saying xxx001 package processed.
Can some one answer this three question?

Hi,
Configuration Manager uses file-based replication to transfer packages between sites in your hierarchy.
Reference:http://technet.microsoft.com/en-us/library/gg712701.aspx#BKMK_File_based
The blog below is talking about the Site to Site Communication in SCCM 2007, but it can help you understand the process of packages transfer to secondary site.
Understanding Site to Site Communication in SMS/SCCM
http://blogs.msdn.com/b/steverac/archive/2010/07/16/understanding-site-to-site-communication-in-sms-sccm.aspx
You could check Distmgr.log and sender.log to get more information. It should take some time in order to transfer so many packages.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Moving the Database to Another Drive

Due to space constraints I need to move my SCCM 2012 R2 database to another drive on the same system(server). I will run preinst/stopsite command to stop all sccm services, but wanted to know if I could copy and move the DB and Log files to their
new drive location, instead of performing a SQL backup and restore? We are currently running SCCM 2012 R2 with SQL 2012 SP1 CU4 as our backend database.
Thanks,
-Bern

you may have already seen these posts... worth a quick look:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/3462715c-d1b7-4f1b-b5f2-1f35235e4179/move-sccm-database-to-another-drive?forum=configmgradminconsole
http://support.microsoft.com/kb/2709082
http://damatisystemcenter.com/2013/05/23/moving-sccm-2012-sp1-database-to-new-folder/

How will the applications gets translated using Globalization

Hi,
By using the Apex user guide, I have done with the multilingual process but not able to view the translated application in the application builder list, How can I get the arabic language gets effected in my applications(Apex).
What are the steps I need to follow?
Please help.
Thanks in advance.
PNR

If you're asking about compatibility, that would be something you would need to ask of the app developers, though most apps compatible with Mountain Lion should be compatible with Mavericks. You can also consult the tables here:
http://roaringapps.com/apps
though that information comes from user reports and so should not be considered authoritative.
If you're asking whether installing Mavericks will delete your apps, no, it won't, though a good backup is always highly recommended.
Regards.

Sccm 2012 extent the active directory schema error

Hello
I am experiecing an issue when attempting to extend my AD Schema for SCCM 2012
<12-10-2014 20:04:33> Modifying Active Directory Schema - with SMS extensions.
<12-10-2014 20:04:33> DS Root:CN=Schema,CN=Configuration,DC=,DC=com
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Assignment-Site-Code. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Site-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Roaming-Boundaries. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Default-MP. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Device-Management-Point. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Name. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-MP-Address. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Health-State. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Source-Forest. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-Low. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=MS-SMS-Ranged-IP-High. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Version. Error code = 8224.
<12-10-2014 20:04:33> Failed to create attribute cn=mS-SMS-Capabilities. Error code = 8224.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Management-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Server-Locator-Point. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Site. Error code = 8202.
<12-10-2014 20:04:33> Failed to create class cn=MS-SMS-Roaming-Boundary-Range. Error code = 8202.
<12-10-2014 20:04:33> Failed to extend the Active Directory schema, please find details in "C:\ExtADSch.log".
any one help me to fix this issue

Hi,
It is most likley due to a replication Issue in your AD, check the previous thread on the topic:https://social.technet.microsoft.com/Forums/systemcenter/en-US/1d377109-4fa9-4608-8a3a-cefd436e82ee/error-8224-when-extending-active-directory-schema
Make sure that all replication issues are solved and try again.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Distribute content failed on sccm 2012

Hello all,
As part of OS deployment, I first did a 'build and capture' a Windows 2008 x64 bit image (.wim) and saved it as part of a shared folder (with full permissions). Next, I wanted to create a 'Operating System Images' under 'Software Library' and was successfully
able to add the .wim image previously created. Next, I wanted to 'Distribute content' to Distribution Point (DP) which happens to be the same server as my Site server and where my 'shared' folder is.
As part of this 'Distribute content' when I check the 'content status' under Monitoring, I see the status in 'RED' (Failed). I checked the 'more details' on the error status and found this:
Can anyone help me understand what is missing and what needs to be done. I'm also going through documentation to troubleshoot this. thanks

Hi,
Have you configure the machine account(site server machine) to at least Read permission?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

If i upgrade Mac OS X mavericks,they will erase the application i installed

if i upgrade Mac OS X mavericks,they will erase the application i installed

You then will have to determine how important that application to you and if there is a replacement version that runs under Mavericks.
There is an alternative that you might consider which is partitioning your HDD with one for Snow Leopard and the other for Mavericks. To execute this in the best possible way may require a larger HDD for your MBP. HDDs are now available up to 1.5 TB in capacity.
Ciao.

Content distribution in SCCM 2012, Will the application be installed automatically?

Similar Messages

Maybe you are looking for