Content filtering, I think...

So I listen to Bubba the Love Sponge on Radioio.com.  There web browser player uses Adobe Flash and there desktop players uses Air.  I can listen to all of the radioio music stations with no problem, but when I try to listen to Bubba's 2 stations the player won't work.  I've contacted the Radioio support team and they have no idea why only the bubba stations are being blocked.  I'm running Windows 7 Pro.  I've checked the content filter on Windows 7 and it's not turned on.  I've check both Internet Explorer's and Firefox content filtering and they are set to the lowest setting possible.  I've tested it on a comple computers in the office that are running XP pro and it work's fine,  I've tested his channels on my home computer that has windows 7 home and it works fine.  So there is something on my windows 7 pro computer at work that is stopping the feed.  I've checked every other part out and I'm down to it either being Adobe Flash or Adobe Air.  I really hope someone knows what's going on.
Thanks for you help
Jeffr

In article <[email protected]>, Sjdimare wrote:
> But if it would be difficult to remove from NDS, then I am not sure it
> will be worth it. It looks like it should be an easy removal but I
> wanted to confirm that.
>
It doesn't really 'integrate with NDS'. You load it (and unload it)
with an NCF file. You use it in BMgr by adding an access rule. Simply
don't load the NCF file and remove the rule, and it doesn't run. To
delete it entirely, you just delete the linkwall folder where it puts
its files.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Similar Messages

  • How do I create Outgoing Mail Policie,Outgoing content filters and individual content filters?

    IronPort C160.
    async OS 6.5.3
    Server 1 and server 2 are communicating through ironport.( and also scanning)
    Server 1 we have setup domain abc.lk and yy.abc.lk in same server, this reside on DMZ. same segment ironport is connected,
    Server 2: we have setup separate server int.abc.lk which is resided on internal lan.
    Server 1 and server 2 should have to communicate internally, but server2 should not communicate to outside the world (eg. [email protected])
    How do I create "Outgoing Mail Policies, Outgoing content filters and the individual content filters?
    Note: Now server 1 and server2 are communicating internal and also communicating external ([email protected]), I need server 2 not to communicate external ([email protected]) it should be block and also do not block server 2 communicating to server1
    I have attached diagram also.
    Thanks.
    sumathi.

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    Hello Sumathi,
    (Thanks for adding a diagram, that helps understanding your situation)
    I think the simplest solution is to create a filter that allows server 2 (based on it's IP) to communicate with the internal domains, and drop the messages when they are targeted to any other domain
    so:
    filter source IP = servers
    condition: message to: is NOT abc.lk or yy.abc.lk
    action: drop message
    hope this helps!
    Steven

  • IOS web content filtering cannot get trend micro filter

    hi, i just wondering how really i can get my router's content filtering connect to trps.trendmicro.com server again. previously it was success to get connect to the server, after i doing some changes on my zone-pair firewall then it cannot connect to the trend micro server anymore.
    sh ip trm subscription status showing that i successfully connected and registerd
    all the installation guide is doing accordingly,then i turn on my debug crypto pli validation and debug ip trm detail, all showing success connection to trendmicro site.
    parameter-map type trend-global <param> are pointing to the trps.trendmicro.com, my class-map and policy-map didn't have any changes since last success connection.
    zone-pair setting also attach with the right policy-map that serve for service-policy urlfilter <name>
    overall, after my zone-pair firewall is UP again, then my web content filtering is gone, while registeration is made..
    anyone have any idea what really happen?
    thanks
    Noel

    Hi Yongkhang,
    I think in order to figure out what is happening, we need to troubleshoot and see the config, data and other show commands.  I'm not sure if you would feel comfortable posting that here.  Therefore, i think its best to open up a case with tac on it so that it can be troubleshot to see why you cant access the trend micro server.
    can you let me know what you mean by when you turn on your ZBF, your web content filtering is gone.  Are you saying, when you turn on zbf, the web content filtering is no longer blocking or allowing sites?
    have you ran the following debugs?
    debug ip urlfilter detail
    debug ip urlfilter event
    debug ip url filter function-trace
    also, what does this show:
    show policy-map type inspect zone-pair urlfilter
    Are you sure you have the class maps in the proper order since its processed sequentially..
    regards,
    scott

  • Re: content filters not available

    Branched from content filters not available
    AdaS (or anyone else @ VZW) --
    So... Here we are again. It is now a year since the issue was originally raised on here.
    Why does Verizon not want to develop content filters for customers on their 4G network with 4G LTE phones?? What are consumers not being told?
    The 3G content filter was developed by Verizon to allow the user filtering controls on the Verizon network. We want Verizon to replicate what it did for their 3G network and do the same when our 4G phones access their 4G network. What's the big deal??
    Please stop the running-in-circles-game. Don't keep sending us to the various manufacturers. That is not where the answer is. Why is this issue not important enough for Verizon to have addressed it by now?
    I apologize if I may be coming across as less than pleasant, but why does this have to be so frustrating??
    Message was edited by: Admin Moderator

    I think you misunderstand.  This thread is looking for the network content filtering to be available.  The S4 does not have content filtering as it has no options available when logged into my account.  The filtering you just suggested simply limits what apps you can choose to download out of the play store, not filtering the web traffic on the device.
    I checked out the link you sent, and under Family Safeguards and Controls, the option we are all wanting is the “Content Filters”.  However, these are the ones that simply display “Content Filters Not Available” when you go to configure them on your account.
    The question is, when is it going to be available or is it never?  If not, what 4G phones will it work on if any?
    This was an awesome feature with the 3G phones, but is a major loss so far with the 4G.

  • Internet content filters

    Any way to provide content filtering for web access (aka: block porn, etc.)? The previously posted solution was "Unite" software which is no longer available.

    I would recommend Content Barrier (www.intego.com), although I think it does block sites based on a list, it is very good and will monitor the admin account as well. Plus a trial version is available which is always a plus.
    The only content filter that monitors based on actual site content is DansGuardian which is free, but I found a pain to set up. Still, it's worth trying if you can find a decent mac setup guide. A mac version is available here: http://mac.softpedia.com/get/Internet-Utilities/DansGuardian.shtml, and the DansGuardian homepage is here: http://dansguardian.org/

  • Content filters not available

    I want to turn on the content filters for a Samsung Galaxy S4, but get the message:
    The cell phone associated with this number is not compatible with the
    Content Filters service. If this is a 4G LTE device please check back at
    a later date as we are currently working to make these devices compatible.
    Go to Support/Device to see if a software update is available for your device.
    Does anybody know when they will be available on the S4?

    I think you misunderstand.  This thread is looking for the network content filtering to be available.  The S4 does not have content filtering as it has no options available when logged into my account.  The filtering you just suggested simply limits what apps you can choose to download out of the play store, not filtering the web traffic on the device.
    I checked out the link you sent, and under Family Safeguards and Controls, the option we are all wanting is the “Content Filters”.  However, these are the ones that simply display “Content Filters Not Available” when you go to configure them on your account.
    The question is, when is it going to be available or is it never?  If not, what 4G phones will it work on if any?
    This was an awesome feature with the 3G phones, but is a major loss so far with the 4G.

  • Weird Content Filtering Issue

    I have had a weird issue come up with our content filtering today, and am wondering if anyone else has come accross it.
    We have a number of Content Filters setup. One of these it looking for various media files including .wmv files (We have used a "Attachment-filename == "\\.wmv"" to look for them).
    This works as required. However this morning out outbound Media File content filter trapped a message containing a wmv file going out that had been received by the user the night before.
    this message last night was processed by the IronPort, the wmv was not hidden or re-named in any way. It was just not stopped by the content filter.
    I have checked everything I can think of and I can see no reason why the message wasn't stopped. WMV's are being stopped OK as I type this.
    Has anyone else come accross or noticed this.
    This is on a C650 Appliance running 5.5.1

    I may have to test this on my machine but it may be that the filename that got pass the filter was in uppercase maybe and that's how it sneaked through. Your filter looks for only lowercase filenames that end with ".wmv".
    The only thing that is case-insensitive by default is the "mail-from" and "rcpt-to". Almost everything else (subject, message-body, other-headers, filenames) are case sensitive. To make these things case insensitive, you'll want to prepend your filter with this:
    Attachment-filename == "(?i)\\.wmv"
    or
    Attachment-filename == "(?i)\\.(exe|bat|com|sh)"
    (?i) --> means ignore the case on whatever follows this regex. You pretty much want to use this in most cases to be safe since match whether it's upper or lowercase. Performance-wise, it should be okay.
    By the way, Ironport filters use Python regex.
    Again, I'll have to test this on my side.
    I have had a weird issue come up with our content filtering today, and am wondering if anyone else has come accross it.
    We have a number of Content Filters setup. One of these it looking for various media files including .wmv files (We have used a "Attachment-filename == "\\.wmv"" to look for them).
    This works as required. However this morning out outbound Media File content filter trapped a message containing a wmv file going out that had been received by the user the night before.
    this message last night was processed by the IronPort, the wmv was not hidden or re-named in any way. It was just not stopped by the content filter.
    I have checked everything I can think of and I can see no reason why the message wasn't stopped. WMV's are being stopped OK as I type this.
    Has anyone else come accross or noticed this.
    This is on a C650 Appliance running 5.5.1

  • High Amount of Spam on Exchange 2013 - Content Filtering is Enabled but Pfizer Spam Filling Up Everyone's Mailboxes

    Hello
    Previously I used Exchange 2010 with Forefront Threat Protection installed and this used to do a good job of stopping all the spam.
    However since updating to Exchange 2013 earlier this year and enabling the integrated spam filtering everyone noticed a sudden increase in the amount of spam which was getting through which has been bad for a long time.
    We have been living with it but in the last 3 weeks everyone has started getting about 40 emails a day from Pfizer for Viagra. All these seem to defeat the content filtering as Viagra is spelt with an extra I and the email address is always different.
    Also images in emails are blocked by default but somehow all the images on these spam messages appear for everyone.
    I am not sure the spam filtering is working at all and I'm not sure how to tell as ForeFront gives you a nice graphical dashboard but I can find nothing similar to this in Exchange and PowerShell seems the only way to configure the limited functionality
    of the content filter.
    Is there any way to get rid of these messages as it doesn't look very good when they are constantly popping up for everyone?
    Thanks
    Robin
    Robin Wilson

    Hello ManU
    Thanks for the reply.
    I have checked the logs and see this quite often:
    AcceptMessage,,SCL,not available: policy is disabled
    But other times it says this:
    RejectMessage,550 5.7.1 Message rejected as spam by Content Filtering
    Which seems to indicate it is rejecting some.
    This is what one of the email headers look like:
    Received: from RWS-MAIL.rwsservices.net (192.168.2.151) by
    RWS-MAIL.rwsservices.net (192.168.2.151) with Microsoft SMTP Server (TLS) id
    15.0.775.38 via Mailbox Transport; Sat, 28 Dec 2013 10:59:26 +0000
    Received: from RWS-MAIL.rwsservices.net (192.168.2.151) by
    rws-mail.rwsservices.net (192.168.2.151) with Microsoft SMTP Server (TLS) id
    15.0.775.38; Sat, 28 Dec 2013 10:58:38 +0000
    Received: from [90.169.106.204] (90.169.106.204) by mail.rwsservices.net
    (192.168.2.151) with Microsoft SMTP Server id 15.0.775.38 via Frontend
    Transport; Sat, 28 Dec 2013 10:58:37 +0000
    Date: Sat, 28 Dec 2013 12:05:58 +0200
    From: US.Pfizer eStore <[email protected]>
    To: robin.wilson <[email protected]>
    Message-ID: <[email protected]>
    Subject: Dear robin.wilson up to 65% OFF!
    X-Mailer: Airmail (223)
    MIME-Version: 1.0
    Content-Type: multipart/mixed; boundary="dd2ee3ea_586bb9e4_6f04"
    Return-Path: [email protected]
    X-MS-Exchange-Organization-PRD: 001-taxis.co.uk
    X-MS-Exchange-Organization-SenderIdResult: Neutral
    Received-SPF: Neutral (rws-mail.rwsservices.net: 90.169.106.204 is neither
    permitted nor denied by domain of [email protected])
    X-MS-Exchange-Organization-Network-Message-Id: e8825204-1f32-48be-a331-08d0d1d30209
    X-MS-Exchange-Organization-SCL: 1
    X-MS-Exchange-Organization-PCL: 2
    X-MS-Exchange-Organization-Antispam-Report: DV:3.3.13223.464;SID:SenderIDStatus Neutral;OrigIP:90.169.106.204
    X-EXCLAIMER-MD-CONFIG: 079171ba-394f-46d5-a160-56e416712e8e
    X-MS-Exchange-Organization-AVStamp-Enterprise: 1.0
    X-MS-Exchange-Organization-AuthSource: rws-mail.rwsservices.net
    X-MS-Exchange-Organization-AuthAs: Anonymous
    The emails use a different sender email address every time and there is always a poem in very light grey writing in the body of the email. The drugs are always misspelt as well. Is this why these are getting through?
    Thanks
    Robin
    Robin Wilson

  • Exchange 2013 SP1 EDGE role content filtering ?

    Hello,
    Have Exchange 2013 SP1 with CU5 with antispam enabled on mailbox role server. And i wonder if i deploy 2013  Edge role, will i get more granular content filter control, like there is in Office 365? For example: i want to treat empty messages as not
    spam.
    I have read that control of Edge server is done ONLY by powershell. So if edge role is deployed, still there is no content filter control in ECP (like in office365) ??

    Hi,
    The Content Filter agent assigns a spam confidence level (SCL) rating to each message. The SCL rating is a number between 0 and 9. A higher SCL rating indicates that a message is more likely to be spam.
    Based on my knowledge, I'm afraid we can't filter the empty messages and treat them as not spam.
    Here is an article about content filtering in Exchange 2013 for your reference.
    Content Filtering
    http://technet.microsoft.com/en-us/library/bb124739(v=exchg.150).aspx
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • Conditions based on "EnvelopSender" in Content Filters

    When defining Content Filters, I need to define conditions based on the sender of an email. For example, if the sender is Jim or John, and Subject Line contains a tag [CONFIDENTIAL], the action should be to encrypt the mesasge.
    I realize this could easily be done using LDAP groups. But my problem is that for a number of opertaional reasons I cannot connect our IronPort to our corp LDAP. 
    An alternative is to directly code the user names in the condition statement. This is ugly and problematic for admins and possibly causes other problems as the number of users grows. Could anyone suggest an alternative?
    Is there any option of having the Condition statement open a file and read the "sender" names from the file maintained somewhere on the local or a remote disk? Any other option?
    Thanks.

    I would suggest looking at creating a dictionary that would list the addresses of the individuals. You can use that dictionary from which to base your planned action.  Using LDAP is by far the better option for keeping a list up to date, as the dictionary will need to be updated regularly as addresses change, added or removed.

  • Using Content filters (HTML Filter)

    Hello.
    I'm having problem displaying an html-page in the portal with an url-iview. The problem is that the portal is accessed using HTTPS, and the url-iview links to a html-page using http.
    This will generate a popup in internet explorer about unsecure content.
    I thought that a way to solve this could be to connect KM to the page and then let the url-iview show the html-page throw the KM Repository.
    This works fine, however there is still one problem.
    Inside the HTML page, there is <IMG src> tags that reffers to the http site.
    How can I configure HTML filters to rewrite all image and stylesheet references via KM instead of to the http-site?
    I've tried to understand the documentation on Content Filters (http://help.sap.com/saphelp_nw04/helpdata/en/55/921d7bb0c611d5993800508b6b8b11/content.htm), but I don't know what to write in "Base Tag" property, or ir this even works.
    Does anyone know if there is an example about this? Or perhaps know how to configure this?
    Regards, Mikael

    This can be done, but it might not be a optimal solution. You would basically parse each HTML file and replace the links before streaming the content. You can create your own version of com.sap.km.cm.docs component which streams the content of a HTML file by replacing the links. And you would use your own component for creating the KM doc iviews that way you will have altered HTML links.

  • [Trend Micro Ios content filtering] parameter-type command under policy map not available

    Hi, all:
    I'm trying to configure TrendMicro IOS content filtering. I have this working on a separate box, running 15.1.
    On this particular testbed, I have a 2900 running:
    System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T1.bin"
    And the following licensing:
    Technology Package License Information for Module:'c2900'
    Technology    Technology-package           Technology-package
                  Current       Type           Next reboot 
    ipbase        ipbasek9      Permanent      ipbasek9
    security      securityk9    Permanent      securityk9
    uc            uck9          Permanent      uck9
    data          datak9        Permanent      datak9
    Configuration register is 0x2102
    CUBE_GOLD_MEX#show ip trm subscription status
           Package Name:  Security & Productivity (Trial)
                 Status:  Active
    Status Update Time:  18:02:51 CST Mon Jul 23 2012
        Expiration-Date:  Mon Aug 20 02:00:00 2012
        Last Req Status:  Processed response successfully
    Last Req Sent Time:  18:02:51 CST Mon Jul 23 2012
    CUBE_GOLD_MEX#
    Also, I have the following config lines on it:
    ip host trps.trendmicro.com 216.104.8.100
    ip name-server 4.2.2.2
    ip cef
    multilink bundle-name authenticated
    parameter-map type urlfpolicy trend tm-pmap
    allow-mode on
    [snip]
    parameter-map type trend-global trend-glob-map
    class-map type inspect match-all http-imap
    match protocol http
    class-map type urlfilter trend match-any drop-category
    match url category Abortion
    match url category Activist-Groups
    match url category Adult-Mature-Content
    match url reputation ADWARE
    match url reputation DIALER
    match url reputation DISEASE-VECTOR
    match url reputation HACKING
    match url reputation PASSWORD-CRACKING-APPLICATIONS
    match url reputation PHISHING
    match url reputation POTENTIALLY-MALICIOUS-SOFTWARE
    match url reputation SPYWARE
    match url reputation VIRUS-ACCOMPLICE
    policy-map type inspect urlfilter trend-policy
    class type urlfilter trend drop-category
    I have not been able to get to the good part of configuring the ZBF.
    I've looked over several configuration examples and can't figure out what I'm doing wrong, since I'm not able to see the command 'parameter-map' under the 'policy-map urlfiltering'
    XXXXXX(config)#policy-map type inspect urlfilter trend-policy
    XXXXXX(config-pmap)#?
    Policy-map configuration commands:
      class        policy criteria
      description  Policy-Map description
      exit         Exit from policy-map configuration mode
      no           Negate or set default values of a command
    XXXXXX(config-pmap)#
    I thought it might be an issue with version 15.2.3, but according to configuration guides, commands are the same.
    Can anyone provide some assistance?
    TIA.
    c.

    Hi Carlos,
    I am having the same problem.  I have seen a few diffenent configuration examples and they all show adding the "parameter type urlfpolicy trend parm-map-name" command but it doesn't exist, at least in 15.2(3)T1 and I see it listed in the the IOS documentation for 15.2.  Maybe they forgot it :-)
    I guess I will open a TAC case as I do not want to downgrade...
    I will keep you posted if I find the answer.
    Regards,
    Troy

  • RV220W - Content filtering not working (?)

    Hello, I bought a router model RV200W fw 1.0.1.0... nice toy.
    It all works very well with the exception of content filtering. The rule only works if connections are made with the HTTP protocol, but if the user connects with HTTPS, then the rule is not considered... (???)
    f.e.:
    http://facebook.com (content filtered)
    https://facebook.com (content NOT filtered)...
    What the hell ! where I'm wrong ?
    Does anyone is experiencing the same ?

    Yes, the correct title was "URL FILTERING NOT WORKING"...thanks abudef000
    I do not want be polemical, but I do not understand where I went wrong.
    Before I buy I looked @
    http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html
    Check it out.
    Could you assume that HTTPS URLs are not in the sentence "Static URL blocking, keyword blocking, approved URL" as stated in the product sheet ?

  • DHCP reservation & DNS for content filtering

    Hi All,
    I am working around with server 2008 for quite a while and facing a problem as below,
    1.DHCP reservation error
    Server Ip:192.168.0.254 (configured as DNS server for local use only with AD & DHCP)
    DHCP scope: 192.168.0.100 to 192.168.0.200 excluded 192.168.0.100 to 192.168.0.110
    earlier the same scope was 192.168.0.10 to 192.168.0.100. I was facing a error when I make a IP reservation against a MAC number error was " The unique identifier may not be correct do you want to use the identifier anyway" when I click yes "DHCP
    server received a message from a client that is not valid" and by this error I am not able to make any reservations now against MAC numbers.
    The same error was also on the earlier scope and that's why changed to a new scope but did not work. Any solutions will me much appreciated
    2.DNS fine tuning. 
    I have an open DNS account on which my WAN IP number is configured to do a content filtering. I have two LAN ports with the below IP number
    Local : 192.168.0.254 ( configured with no gateway and DNS as loopback (127.0.0.1)
    ISP: 192.168.0.253 (with ISP gateway and DNS as loop back adapter & open DNS)
    I have did a content filtering and things are working fine. But I got to open up some machines out of this content filtering and when I try to give the IP number in this below fashion.
    192.168.0.115
    255.255.255.0
    192.168.0.1
    DNS
    192.168.0.254
    ISP DNS to avoid filtering
    I find that 192.168.0.254 does the resolving and things are still filtered as per the schedule. Is there a way where we can configure 192.168.0.254 (Local DNS server) to stop resolving web requests and only cater to resolving local names for connectivity.
    I do know its too long but solutions for the same will be help me out to solve it. Thanks in advance.
    Regards,
    Vaschell

    Hello,
    I have found something strange on the DHCP reservation. When I try to add a MAC number out of the network its able to make out a reservation.
    Is there any way to clear the MAC number cache or something else which I can try.
    A copy of the ipconfig /all for the server is below,
    C:\Users\Administrator>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : server
       Primary Dns Suffix  . . . . . . . : xyzabc.com
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : Yes
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : xyzabc.com
    Ethernet adapter LOCAL:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) I210 Gigabit Network Connectio
    #2
       Physical Address. . . . . . . . . : 00-1E-67-A4-F4-DC
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 192.168.0.254(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . :
       DNS Servers . . . . . . . . . . . : 127.0.0.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter ISP:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) I210 Gigabit Network Connectio
       Physical Address. . . . . . . . . : 00-1E-67-A4-F4-DB
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 192.168.0.253(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.0.1
       DNS Servers . . . . . . . . . . . : 127.0.0.1
                                           208.67.222.222
                                           208.67.220.220
       NetBIOS over Tcpip. . . . . . . . : Enabled
    PPP adapter RAS (Dial In) Interface:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : RAS (Dial In) Interface
       Physical Address. . . . . . . . . :
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 192.168.0.205(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.255
       Default Gateway . . . . . . . . . :
       NetBIOS over Tcpip. . . . . . . . : Disabled
    Tunnel adapter Local Area Connection* 8:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{0602F6CF-4B32-491F-994A-3C0952D
    B54}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 9:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{6A14710B-A078-4AF9-BD7A-989767F
    377}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 11:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 02-00-54-55-4E-01
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 12:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    C:\Users\Administrator>
    Thanks,
    Vaschell

  • Download of Firefox for Mobile is inhibited because "Your content filtering level doesn't allow you to download this item." How do I correct my content filtering level?

    I have a Samsung Galaxy SII with T-Mobile. The model #is SGH-T989, Android version 2.3.6

    "Content filter" is the Android Market's method for restricting certain applications that may provide access to "mature" content. You can disable content filtering in the settings of the Market app on your phone.
    -Michelle

Maybe you are looking for

  • Calendar went to icloud and disappeared where how do i get entries back onto iphone4

    Updated os, connected to iCloud, backed up including calendar, Now all calendar entries have gone. Tried switch off iCloud, switch off calendar, switch on again, unit off/on Have no historical entries, backup - more like bin up, not happy - pls help

  • ABOUT CODE CHECK

    what is the diffrence between code inspector and EPC(Extended programe check)

  • System exception code 0xc0000005 after upgrading to LabVIEW 8.2

    After upgrading to LabVIEW 8.2 from LabVIEW 8.0 I am continously getting a system reboot on my PXI (8187) when attempting to run my real time loops which worked fine with LabVIEW 8.0.  The loops seem to start, and within less than a 30 seconds the sy

  • Camera raw 7.3 and lightroom 4.3

    is it correct to assume that one should update lightroom to 4.3 and camera to 7.3 so that edit in from lightroom to photoshop will not generate a notice? vince

  • 1315 all in one scan problems

    This printer used to work so well, but now there is no HP director with which to choose "scan" on my desktop or in my "all programs" field.  I've tried to hunt through the troubleshooting section to no avail.  No matter what the troubleshooter tells