Content filters on samsung reality--not available?

was trying to set up content filters for my kids on a samsung reality.  i was told that it would not work on that phone and the phone would need to be upgraded to be able to use.  The two other phones on the family plan are balckberries and content filters are available.  WHy can't i use these filters on the reality?

You might be referring to our DLP (Data Loss Prevention) seen on 6.0 and above. Below is a clip from our User Guide, you can search for that section to see if it fits your needs.
DATA SECURITY AND EXTERNAL DLP POLICIES OVERVIEW
In the Information Age, your organization’s data is one of its most prized possessions. Your
organization spends a lot of money making data available to your employees, customers, and
partners. Data is always on the move by traveling over the web and email. This increased
access poses challenges for information security professionals to figure out how to prevent the
malicious, accidental, or unintentional loss of sensitive and proprietary information.
The IronPort Web Security appliance secures your data by providing the following
capabilities:
• IronPort Data Security Filters. The IronPort Data Security Filters on the Web Security
appliance evaluate data leaving the network over HTTP, HTTPS, and FTP to control what
data goes where and how and by whom.
• Third party data loss prevention (DLP) integration. The Web Security appliance integrates
with leading third party content-aware DLP systems that identify and protect sensitive
data. The Web Proxy uses the Internet Content Adaptation Protocol (ICAP) which is a
lightweight HTTP based protocol that allows proxy servers to offload content scanning to
external systems. By offloading the content scanning to dedicated external systems, the
Web Proxy can take advantage of the deep content scanning in other products while
being free to perform other Web Proxy functions with minimal performance impact.

Similar Messages

  • 3930K - what make RAM, when Samsung is not available?

    Sorry, I posted this mistakenly in the software forum.
    Are Samsung 1.35v chips the only ones which work reliably?  What are people using when Samsung is not available is or available in unsuitably small kits (4gb or 8gb)?

    There are several people that use G.Skill Ripjaw-Z 8 GB sticks fully populated without problems, even when overclocked.

  • Filtering - some choices are not available

    When filtering repsonses that belong to a drop-down item I cannot see all available options even though there are some entries using that specific option. I need to filter them as a custom entry although they are not. This happens with the older entries. What is the problem?

    The available options for a drop-down item in filter dialog come from the entries in response table.
    If an option never be submitted into response table, it won't appear in the filter dialog.
    In your question, not sure if you encontered an issue. Can you please share your form with me? You can share your form by clicking on "Share" button at the lower left corner of FormCentral and choose "Add Collaborators". My email address is [email protected] I'll try to filter.
    Thanks,
    Ying

  • Samsung driver not avaiLable for LION?

    My printer does not work with LION

    Hi Greg,
    Thank you for your reply. I had followed the instructions on the Apple Support sheet. The Software Update from the Apple menu led to no success, neither did the contacting of the manufacturer of my printer (Samsung), since Samsung said they wouldn't know whether a driver for this version will be still developed or not. After following the automatic installer on the Samsung website, that automatically installs the right updated drivers for your printer, I still get the below message of my printer: 'You need to install software to use this printer. To install the software, choose Software Update from the Apple menu. If the software for your printer isn’t available in Software Update, contact the manufacturer of your printer.'
    So do they want me to buy a new printer now because the old driver only supports till OS X 10.9.?

  • IOS Content Filtering - Is No More ?

    Cisco very quickly End of Lifed the IOS Content Filtering offering last year
    http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6643/eol_c51-698205.html
    For something with a minimum of a yearly lic involved, the EOL timing is shocking - you could have ordered product with a 1 year lic and come back now to find the offering is now dead (as in our case) so much for ROI !
    Cisco are pushing Scansafe as their current offering, which has probably led toa  falling out with Trend who provided the underlying service for
    IOS Content Filtering. Scansafe does not economically cover the low end application, for which IOS Content Filtering was ideal i.e SMB space with 8xx or low end ISR routers. The Cisco answer is basically "perhaps you want to go and investigate solutions form other suppliers"
    So we are left with a router platform which is fine and  content filtering which was fine but are now unable to re-licence the URL filtering service and will stop working in about 30 days and there is apparently nothing we can do about it
    Does anyone know if Trend still operate the URL filtering subscription service and whether theire is a way of geting a subscription renewal direct ?
    (i'm not holding my breath on that - I am guessing the IOS content filtering hooks for the service being certificate based + Cisco license process will make that hard for anyone but Cisco)
    Or of any alternative simple and cost effective solution we can configure the router to use
    (please tell me we're not back to SurfControl/Websense solutions again..)
    thanks
    Sez

    Approached the Cisco AM - frankly there was little or no interest in fixing such a low value problem. The spin was the Trend relationship ending was beyond Cisco control and Cisco hands tied - i.e. its not our fault (but strangely the problem is the customers)
    Yes we could get some TMP discount - against the original hardware purchase but the hardware for lowend installs is negligible, it is the services time/cost in getting solution (and any replacement) into deployment which is the costly part and TMP makes no allowance for that.
    Also scansafe solution is much more expensive, compared to IOS URL Filtering, so even taking off the minor TMP discount the answer form Cisco is basically - yep spend more money with us and we'll fix the problem we created for you. And why is there so little normal info on Cisoc.com for scansafe - i.e. covering SKU/ordering models etc... It always just ays 'ask your Cisco AM for details' - that may have worked when Scansafe was a separate company but a Cisco AM is unlikely to even answer the phone to talk about a $3K order
    If Cisco really wanted to protect customer investment, why couldn't it provide through Scansafe a replacement service for IOS URL Filtering service, at similar cost and pricing model to that provided by the Trend integration? i.e. same kit, same config but pointed at scansafe cloud rather than Trend cloud. Then there would be no issue and a clean migration path provided for Ciscos valued customers
    Probably answering my own question but scansafe appears to return to a cost related to the user count, whereas IOS URL Filtering service was a simple one off cost per router. This was ideal for low end application (the ISR800 series size of deployment) and comparable scansafe is way more expensive.
    I have found we are not alone in this, most customers are only finding out about this mess when existing IOS URL Filtering licence's expire and go for renewal only to find the 3 month EOL process has stealthily boatanchored their implementation.
    Sez

  • Internet Content Filtering

    Hello; I am looking at Purchasing a BB Curve from Verizon Wireless (all of our phones are with them now).
    I need to figure out how to set-up Internet (WEB) content filtering without using BES.  We are not setup with Microsoft exchange server etc.  I will be the only employee with a Blackberry.
    Can this be done without using BES?  I have searched HIGH and LOW and have found NOTHING that tells me if this can be acheived and how.
    Verizon Wireless offers Web Content filtering but of course NOT for BBs.
    HELP!!
    Solved!
    Go to Solution.

    Hi and welcome to the forums,
    I was unable to come up with any content filtering for a BIS device as well.
    They are all designed for BES.
    Sorry!
    If this answers your question please resolve the thread by using the options over the kudo's star.
    If you need more assistance please let us know!
    Thanks!
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Content filters not available

    I want to turn on the content filters for a Samsung Galaxy S4, but get the message:
    The cell phone associated with this number is not compatible with the
    Content Filters service. If this is a 4G LTE device please check back at
    a later date as we are currently working to make these devices compatible.
    Go to Support/Device to see if a software update is available for your device.
    Does anybody know when they will be available on the S4?

    I think you misunderstand.  This thread is looking for the network content filtering to be available.  The S4 does not have content filtering as it has no options available when logged into my account.  The filtering you just suggested simply limits what apps you can choose to download out of the play store, not filtering the web traffic on the device.
    I checked out the link you sent, and under Family Safeguards and Controls, the option we are all wanting is the “Content Filters”.  However, these are the ones that simply display “Content Filters Not Available” when you go to configure them on your account.
    The question is, when is it going to be available or is it never?  If not, what 4G phones will it work on if any?
    This was an awesome feature with the 3G phones, but is a major loss so far with the 4G.

  • Re: content filters not available

    Branched from content filters not available
    AdaS (or anyone else @ VZW) --
    So... Here we are again. It is now a year since the issue was originally raised on here.
    Why does Verizon not want to develop content filters for customers on their 4G network with 4G LTE phones?? What are consumers not being told?
    The 3G content filter was developed by Verizon to allow the user filtering controls on the Verizon network. We want Verizon to replicate what it did for their 3G network and do the same when our 4G phones access their 4G network. What's the big deal??
    Please stop the running-in-circles-game. Don't keep sending us to the various manufacturers. That is not where the answer is. Why is this issue not important enough for Verizon to have addressed it by now?
    I apologize if I may be coming across as less than pleasant, but why does this have to be so frustrating??
    Message was edited by: Admin Moderator

    I think you misunderstand.  This thread is looking for the network content filtering to be available.  The S4 does not have content filtering as it has no options available when logged into my account.  The filtering you just suggested simply limits what apps you can choose to download out of the play store, not filtering the web traffic on the device.
    I checked out the link you sent, and under Family Safeguards and Controls, the option we are all wanting is the “Content Filters”.  However, these are the ones that simply display “Content Filters Not Available” when you go to configure them on your account.
    The question is, when is it going to be available or is it never?  If not, what 4G phones will it work on if any?
    This was an awesome feature with the 3G phones, but is a major loss so far with the 4G.

  • When will content filters be available for the samsung s5?

    When will content filters be available for the samsung s5?

    When we reach the screen for filters...
    I also have the Samsung S5.
    This is the message we get:

  • [Trend Micro Ios content filtering] parameter-type command under policy map not available

    Hi, all:
    I'm trying to configure TrendMicro IOS content filtering. I have this working on a separate box, running 15.1.
    On this particular testbed, I have a 2900 running:
    System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T1.bin"
    And the following licensing:
    Technology Package License Information for Module:'c2900'
    Technology    Technology-package           Technology-package
                  Current       Type           Next reboot 
    ipbase        ipbasek9      Permanent      ipbasek9
    security      securityk9    Permanent      securityk9
    uc            uck9          Permanent      uck9
    data          datak9        Permanent      datak9
    Configuration register is 0x2102
    CUBE_GOLD_MEX#show ip trm subscription status
           Package Name:  Security & Productivity (Trial)
                 Status:  Active
    Status Update Time:  18:02:51 CST Mon Jul 23 2012
        Expiration-Date:  Mon Aug 20 02:00:00 2012
        Last Req Status:  Processed response successfully
    Last Req Sent Time:  18:02:51 CST Mon Jul 23 2012
    CUBE_GOLD_MEX#
    Also, I have the following config lines on it:
    ip host trps.trendmicro.com 216.104.8.100
    ip name-server 4.2.2.2
    ip cef
    multilink bundle-name authenticated
    parameter-map type urlfpolicy trend tm-pmap
    allow-mode on
    [snip]
    parameter-map type trend-global trend-glob-map
    class-map type inspect match-all http-imap
    match protocol http
    class-map type urlfilter trend match-any drop-category
    match url category Abortion
    match url category Activist-Groups
    match url category Adult-Mature-Content
    match url reputation ADWARE
    match url reputation DIALER
    match url reputation DISEASE-VECTOR
    match url reputation HACKING
    match url reputation PASSWORD-CRACKING-APPLICATIONS
    match url reputation PHISHING
    match url reputation POTENTIALLY-MALICIOUS-SOFTWARE
    match url reputation SPYWARE
    match url reputation VIRUS-ACCOMPLICE
    policy-map type inspect urlfilter trend-policy
    class type urlfilter trend drop-category
    I have not been able to get to the good part of configuring the ZBF.
    I've looked over several configuration examples and can't figure out what I'm doing wrong, since I'm not able to see the command 'parameter-map' under the 'policy-map urlfiltering'
    XXXXXX(config)#policy-map type inspect urlfilter trend-policy
    XXXXXX(config-pmap)#?
    Policy-map configuration commands:
      class        policy criteria
      description  Policy-Map description
      exit         Exit from policy-map configuration mode
      no           Negate or set default values of a command
    XXXXXX(config-pmap)#
    I thought it might be an issue with version 15.2.3, but according to configuration guides, commands are the same.
    Can anyone provide some assistance?
    TIA.
    c.

    Hi Carlos,
    I am having the same problem.  I have seen a few diffenent configuration examples and they all show adding the "parameter type urlfpolicy trend parm-map-name" command but it doesn't exist, at least in 15.2(3)T1 and I see it listed in the the IOS documentation for 15.2.  Maybe they forgot it :-)
    I guess I will open a TAC case as I do not want to downgrade...
    I will keep you posted if I find the answer.
    Regards,
    Troy

  • Content format is not available

    Hi,
    When I am trying to watch any programme, live or on catch up on my phone I keep getting an error saying "aa technical error occurred. The content format is not available".
    does anyone know what this is or how to fix it?
    Thanks.

    Hi  I had same issue on my Samsung mobile phone, I have uninstalled the SkyGo app and reinstalled it, all working fine now.  Hope this helps. Cheers

  • When I click on my Facebook album, it just takes me to a page that says 'content not available' and the pictures do not show up on my page. Why?

    Hi everyone,
    I'm having some trouble with Facebook for iPhoto. I recently migrated my buisness profile to a Page, per Facebook's rules, so when I log-in, I only have my Page. I connected the e-mail and password with iPhoto and have been trying to upload pictures. The pictures go to iPhoto, and they pend and then get approved. However, they do no show up on my Page, and when I try to click on the album through iPhoto is just says 'content not available.'
    Does anyone know a solution to this problem?
    Thanks,
    Louise

    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • I have an ipad that I purchased in Australia and my iTunes account is Australian, but when I try and watch Australian TV shows on Australian websites it says that the content is not available because I am not in Australia.

    Please help! I have an ipad that I purchased in Australia and my iTunes account is Australian, but when I try and watch Australian TV shows on Australian websites it says that the content is not available because I am not in Australia. How can I fix this?

    Are you using a proxy server to access the net?
    Or another cause could be that your router thinks it's in its home country (probably china)
    I just don't know how to fix it. There's a way but I don't know enough to advise.
    You could try googling your router model and 'wrong country' or keywords like that and see if something comes up.

  • "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
    Is there a way to tell Safari what encoding to use if the web page fails to do that?

  • Link to content area - portlet not available

    I have a link to a content area in that I open from another application. Occassionally, I get a "portlet not available" message. Is this related to navigating directly to the document repository? It works most of the time.
    So 3 questions:
    Is it acceptable to navigate directly to the content area? (My users then log on and store documents)
    Am I getting the "portlet not available" message because of navigating to the content area this way?
    Is there another reason I'm getting this message?
    Thank you

    Unfortunately, the only way to do this would be to not show the sub-folder region and add URL items in another region that link to the folder page in question.

Maybe you are looking for

  • So you want to change your primary mail but can't ...

    Hi! I ran into the same problem as a lot of other people seem to have done. I am changing ISP and because of that I have to change my mail address from my 10 year old [e-mail removed for privacy and security] to something else, this time I choose to

  • How can I find duplicates within my form?

    I'm trying to find a way to track down if we get any duplicate entries in our form. I've seen the filter option but not sure I'm using it correctly as it seems I would still need to go through all the names to find the duplicates.

  • Old to the New

    How do I get my music and apps transfered from my iTunes in my old mac laptop to the new?

  • CS4 Cannot place PSD files in Yosomite

    Like a LOT of other users, I am working using CS4, a great package and I have always been happy with it and very stable, and I do not want to update to CS6 as cost is an issue. Please can anyone answer the question of how to fix the problem of not be

  • ODBC throwsqlException error

    I am trying to communicate between an Oracle 9.2.0.4 database on AIX 5.2 and applications sitting on Windows 2000 Professional, using the Oracle ODBC driver. I have tried a number of the drivers but they bring back the message 'oracle.jdbc.dbaccess.D