Content for 0REFX_3 transfer rules missing.

Hi folks
We are trying to implement content for 0REFX_C03 cube. But the transfer rules from datasource to infosource 0REFX_3 is missing from business content.
Inorder to get that we have implemented SAP note
BW transfer rules missing in delivery
SAP Note Number: 1246385
And we installed BI_CONT 704 SAPK-70401INBICONT New support pack for BI content.
It leads to weird changes in the system like previously available objects in BI content are missing.
Did any body encountered same problem.

Hi,
We are having the same problem - no transfer rules for 0REFX_C03.
Currently on BI_CONT 735 Level 003.
Did this problem get resolved?
Any help greatly appreciated.

Similar Messages

Transfer Rules missing in Business Content (704 lvl 1) for CMS

Hi SDN,
We are currently on BI 7.0, and using Business Content 704 level 1. When collecting BIC InfoSources for Collateral Management Systems (CMS), we notice that the transfer rules are missing in business content.
Has anyone encountered this issue? I have been referencing notes 1171293, and 1179880
Thanks,
Brendon

hi,
If there is missing in Business its problem with the business content patch levels.Check out with your basis team.
Regards,
Shiva.

BI transfer rules missing .

Dear all,
we had made a system copy of the source system (ECC) and with BI (Scm) system i.e both the systems on Quality was refreshed with prod , now we get the error that transfer rules does not exist on the copied BI system .
Could any one help
Regards
kumar

Hi,
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
SAP Note 184754 - Procedure after BW database copy
SAP Note 184322 - Procedure after DB copy of BW source systems
SAP Note 538052 - Maintenance of Myself destination in BW
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Need to activate the objects and then transport.
Thanks
Reddy

RSAU_READ_MASTER_DATA in transfer rules missing results or dump

Hi Guys,
Anybody know about if the RSAU_READ_MASTER_DATA work in transfer rules??
I have a routine for field attribute derivation from a infobject; putting the trans-structure as I_CHAVL and returning the E_ATTRVAL in result. But don't work and is hiring a dump of CALL_FUNCTION_CONFLICT_TYPE.
I tested with I_CHAVL equal to a string that is the key of a field in the infobject that I want to read; i haven´t the dump but don't work. The value is blank.
The code is the next:
CALL FUNCTION 'RSAU_READ_MASTER_DATA'
    EXPORTING
      I_IOBJNM   = 'KSTATSDSK'
      I_CHAVL    = TRAN_STRUCTURE-KSTATSDSK
I_T_CHAVL                     =
I_DATE                        =
I_FLG_WHOLE_TABLE             =
      I_ATTRNM                    = 'KGRALSTA'
      IMPORTING
E_STRUCTURE                   =
E_TABLE                       =
      E_ATTRVAL                   = RESULT
EXCEPTIONS
      READ_ERROR                    = 1
      NO_SUCH_ATTRIBUTE             = 2
      WRONG_IMPORT_PARAMETERS       = 3
      CHAVL_NOT_FOUND               = 4
      OTHERS                        = 5.
Please, help me to see the error, if exist, or help me with other method for do this master data attribute read.
Thank you.

Hi Jeysi,
What's ur purpose here ??
If u're gonna read some data in master data, instead of using function, why don't u directly select to master data table ???
Usually the table name is /BIC/PX
X: Master data name.
/BIC/ => Customized one.
But if you want to get the information regarding what the table is, you can open directly respective master data info-object, and you go to master data tab.
In over there, you'll see the box whose label is Master data tab.
You can use SELECT command in ur corresponding transfer/update rules..
SELECT *
FROM ..
INTO CORRESPONDING FIELD OF TABLE ..
WHERE ..
Hopefully it can help you a lot.
Regards,
Niel.

Transfer rules missing!!!

Hi,
i can not see any tranfer rules in BI content . i have Bi -content 9 and Bw SP15 patch levels.
any suggestions?
regards,
prasad

no am not done any migration of Ds till now,,
m donethe following steps..
1. Rsa5 -DS (3.x)activation ..(master n transaction)
2. replicated in Bi side .
3. installed the 0SD_C03 cube with "dat flow before " and "Automatic collection"
4.while tring to load master data for TEXTS 0BILBLK_ITM ..In Transfer structure it's not proposing the KEy1 field ..if i tries to map manually ..then loading ..it's giivng erroe where as in r3 records are avaialble (RSA3)..
is there any issue with BW SP15 and BI content 9 combination...
please suggegst.
regards

Business content for standard component is missing in BW

In a new BW implementation project what I have done is
1) activate all datasource in R/3
2) Replicate datasource in BW
3) Activate infoobject in business content.
The problem is, when I go to Business content >InfoObject by Application component> All I see is node OBWTCT ( Technical Content ). Why I Don't see the standard component ex FI SD COPA etc ? Is there a step missing ?

Hi,
Maybe you did not activate the infoareas/infocatalogs.
Try this:
-Tx(RSD1)
-Find any of the infoobject that you activate and check where is present the infoobject.
Regards
Assigns point if useful

2LIS_02_SCL Transfer Rules are missing

Good Morning everyone, I recently activated BI Content (7.05 SP4) in BW (7.02 SP8) for infocube 0PUR_C01, and I can not see the transfer rules for 2LIS_02_SCL, what can I do?

Juan Orozco wrote:
I did install BC for 2LIS_02_SCL Transfer Rule (ISMP) again with options "In data flow before and afterwards", I got the right flow of objects from 2LIS_02_SCL ECC datasource to 0PUR_C01 Infocube in BW installed, but the Transfer Rule 2LIS_02_SCL status is Modified(Saved), when I try to activate this Transfer Rule, the system send the message "There is no PSA for InfoSource 2LIS_02_SCL_DA and source system LOGSYS120", what can I do?
Case A. RS_TRANSTRU_ACTIVATE_ALL
Case B. Give the tech name of the CLNT120 & generate it. RSDS_DATASOURCE_ACTIVATE_ALL
Case C. Replicate the datasource after adding/deleting fields in R/3. Right-click on this datasource and select 'replicate metadata' again. Activate using FM in Case A.
Edited by: Arun Bala G on Feb 16, 2012 9:29 PM

Start Routine for transfer rules

Hello experts,
I want to use the SQL DISTINCT keyword to return non-duplicate results from a table in a DataSource (data base) in a the start routine for the transfer rules.
How do I address that table in the start routine of the TR?
I thought about something like that.
TABLES: mytable
DATA: itab_mytable type table of mytable
SELECT DISTINCT CUSTID, etc.
FROM mytable into table i_tab.
I am new to ABAP so I would be happy to get some suggestions!
thanx in advance
Axel

Hello Oscar,
as fa as I understood the entire data package in the transfer structure format is used as parameter (DATAPAK) for the routine.
so I want to perform a SQL statement on DATAPAK!
But it sais it can't find DATAPAK in ABAP-Dictionary as a table!
can I actually perform SQL statements on DATAPAK?
Thanx
Axel

Error while migrating transfer rules

Hi all,
When migrating <b>2LIS_02_SCL</b> transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199 after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
Regards
KK

Hello,
unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
Please adjust the rules to the ABAP OO compliance.
This how to paper should help:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
and
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
I hope this helps.
Michael

How to get Transfer rules or Transformations from SRM Datasources to Infoso

Hi
We are in SRM 7.0 and BI 7.0. We have all the datasources activates from SRM and replicated in BI side. Now we have all of the content in Dataflow ,, from Datasources to DSOs, Cubes and Multiproviders,,,
Except Transdormations from Datasources 0SRM_TD_CF, 0SRM_TD_IV, 0SRM_TD_PO_ACC, 0SRM_TD_PO in SRM EBP to respective Infosources.
I have activated the datasources and tried both in 3.5 and 7.0. But I couldn't find the business content transfer rules/ Transformations.

Hi there are trnasfer rules please have a look under BI content >object type> transfer rule search
0SRM_TD_CF                    DE3_630     from SRM CF Transactional for DE3 Client 630
0SRM_TD_IV                    DE3_630     from SRM IV Transactional for DE3 Client 630
0SRM_TD_LA                    DE3_630     from SRM LA Transactional for DE3 Client 630
0SRM_TD_PO                    DE3_630     from SRM PO Transactional for DE3 Client 630
0SRM_TD_PO_ACC           DE3_630     from SRM PO Accounting for DE3 Client 630
let me knw whether it ws helpful

Cannot See Transfer Rules in Transport Connection

Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
Nick

Bryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

Transfer Rules are Inactive in BI 7.0

Hi,
I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
Object 0PS_CLM_CST object version not found in table
Object 0PS_CLM_CST object version not found in table
Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
Please provide me solution.

>
subba reddy wrote:
> Hi,
>
>
> I installed info bjects from Business Content, after installing transfer rules are inactive for project claims(0PS_CLM_CST). I am getting this type errors, object 0PS_CLM_CST Object version not found in table.
> and also i am running the program in se38 (RS_TRANSTRU_ACTIVATE_ALL) It is showing errors.
> Object 0PS_CLM_CST object version not found in table
> Object 0PS_CLM_CST object version not found in table
> Transfer structure 0PS_CLM_CST_BB NOT activated successfully Activate manually.
> Please provide me solution.
Hi,
After running the above program,catchup your infosurce and do manually activation of your transfer rules and updates as well,if present.
check whether all the InfoObjects are mapped correctly and the status is active or not.
Hope it helps...

Cannot find transfer rules!!!

Hi,
I have to delete an InfoObject which is no longer required.
when I right click and hit delete I get an error message that the IO is being used in a Transfer Rules.
I have searched for that transfer rule but can't locate it.
Is there any way to know where this transfer rules is?
Thanks
NEWBW

I Got the following message when I looked for it in the Metadata Repository. Please help me proceed.
InfoSource ZZXXXX (Master Data) is not known
Message no. RSAR208
Diagnosis
The InfoSource is not known.
System response
The transfer rule maintenance cannot be called.
Procedure
If this concerns an InfoObject for the InfoSource, check whether an application component is assigned to the InfoObject. If not, assign an application component to the InfoObject.

Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1

Hi,
I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
We are at BI Cont 7.03, patch 8.
There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
Does anyone have a solution for this?
Thanks!
Kathleen

Hi Kathleen Cooke ,
I am having similar issue now, can you please let me know if you know the solution for the below problem..
I am trying to activate the Business Content for BW Statistics, but the datasource and the Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
I am on
BI_CONT 703, level 0005, Support Package SAPKIBIIP5
SAP_BW 700, level 0012, Support Package SAPKW70012
Thank You,
Varun.

Transfer rules are missing for selected source system in BI content

Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.

Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna.

Content for 0REFX_3 transfer rules missing.

Similar Messages

Maybe you are looking for