Content for SAP Mill Products

Hi there
does anybody know as of when SAP plans to have a Business Content for SAP Mill Products available?
Thanks and regards
Gerald

There is none and nothing planned yet by SAP...

Similar Messages

Documentation for SAP MILL

Dear Seniors,
I am a SAP Consultant with experience in PP. I have now a request for a customer that uses SAP MILL.
I was trying to find on the internet some resources about SAP MILL and I did not find much.
Do you know where I can find documentation about SAP MILL or some SAP standard courses about this ?
Many thanks in advance for your great support,

Dear Alex,
can yuo help me and explain briefly what you mean with "SAP Mill"?
Has the customer activated the DIMP (Discrete Industries Mill Products)-Industry Externsion in ECC - and you would thus like to learn more about IS-MP-PP?
Are you interested only in PP functionality, or also functionality related to SAP APO?
As a starting point you always use help.sap.com and follow the path:
SAP Business Suite - SAP ERP - you release - and application help.
Further on to "Industries in SAP ERP" - SAP Discrete Industries and Mill Products" - SAP Mill Products.
Or you can directly click here: SAP Mil Products and select the application area you are interested in.
Are you looking for a solution to a specific problem?
Regards,
Stefan

SQVI Report for SAP CRM Product Hierarchy and its Product

Hi
How to create a SQVI report for generating a list for SAP CRM Product Hierarchy which should show the outputs->Level 1, level 2, level 3 and level 4 categories and its products?
I tried COMM_Hierarchy table and Comm_product but not able to achieve this requirement.
or Is there any chance of getting related tables so that I could try more for this requirement.
In which table both product id and its category Id can be found?
Pravin

Thanks DJ
Is there any possibility to get a report for product hierarchy in SQVI ?
say in SAP CRM system, the product category is maintained in COMM_HIERARCHY as
Parent category Id->
                                Level2 Category Id->
                                                                 Level 3 Category Id->
Level 4 category Id ->
Product Id's
(I understood the link between Level 4 category id and product id with your info.) but not able to achieve the requirement fully.
Is there any possiblity to achive for generateing a report?

Unable to find ESR XI Content for SAP PI 7.1 EHP1

Hi all,
I check on Marketplace but I don't find the ESR Content (XI Content) for the SAP PI 7.1 EHP1, only ESR Content for SAP PI 701.
I follow the link:
[http://help.sap.com/saphelp_nwpi711/helpdata/en/48/d113f7b4073254e10000000a42189b/frameset.htm|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/d113f7b4073254e10000000a42189b/frameset.htm]
Any ideas?
Thanks in advance.
GB

Hi,
the page you refer to only mentioned that you can import any XI content (form any of the earlier PI releases)
into SAP PI 7.11 (PI 7.1 with EhP1)
so if there is no XI content for 7.11 you can import any other from any of the previous releases
Regards,
Michal Krawczyk

PI 730 - XI Content for SAP BASIS

Dear Support,
When I searched the SAP Marketplace for "PI 730 - XI Content for SAP BASIS", I have found the files which has .SCA extension instead of .tpz or .zip file extension.
Am I looking into a wrong directry if so, could you please help me in pointing to the correct directory?
Otherwise, could you please let me know the way to Import the Design Objects onto PI 730 system?
Thank you,
Nikee

Hello
The 7.30 SAP Basis content is delivered as a *sca file. You need to extract the *tpz file from this and import into the ESR in the normal manner. See the kba #1637955 PI ESR Content for SAP BASIS 7.30 for further details.
P.S. point 6 of the previous post is incorrect - "Under this you can get XI CONTENT PI_BASIS". It is available under XI CONTENT SAP_BASIS (not PI_BASIS)
Regards
Mark

PI / XI content for SAP APPL 6.04?

Hi guys,
I would like to use the Business Partner functionality (create, read etc) in SAP PI 7.1. We currently only have PI content for SAP APPL 6.03.....but the SYNCHRONOUS interfaces I really want are in SAP APPL 6.04.
Here are the interfaces I need to use...
http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE04284687BEBDF19515001A64D3F462&id=26423549723411DA36BB000F20DAC9EF
There is only an ABAP / SAR file download from the service marketplace for 6.04.........for 6.03 there is both the ABAP and XI related content download.
Does anyone have any idea when the SAP XI / PI will get content for SAP APPL 6.04?
I know the interfaces are synchronous and that they will be available on the SAP Backend system if I load the SAP APPL 6.04 there. And then they would be available through transaction SOAMANAGER etc......but we are wanting to use XI as the central repository for our interfaces, and then generate ABAP proxies in the SAP backend.
Any help in this regard would be greatly appreciated
Regards
Lynton

Hi Lynton
See the note #1152640 SAP NetWeaver 7.1: Importing ESR content. This contains the links to the location of all PI Content. I believe SAP APPL 6.04 is now available.
Regards
Mark

Business Content for SAP BW ,WAM work order ans asset management

Hi All,
where can i see the business content for sap work order and asset management. can i see it in help.sap.com
i tried but could not get . any url would be appreciated.
Regards
Srini

Thanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag

Business Process documents for SAP ESHM-Product Compliance

Hello All
Can anybody please the share the links or documents for standard SAP Business Process documents for SAP ESHM-Product Compliance.
What I am looking is for Compliance of Product, IMDS, CDO, Material Data Exchange in the automotive supply-chain, generation of RRR reports.
Well I would be using this for self learning purpose.
Thanks & Regards
Satish

Dear Satis
because of historic reason in history of SAP there might be the risk to misinterpret your question. This would be my first answer:
1.) check this document first: SAP EHS Management for Beginners
2.) check may be:SAP Product and REACH Compliance - SAP Library
Some "topics" are dealed with this SAP solution
3e.) years ago a product if TechniData was available called "Compliance for products". Regarding many of the functions therein: these are now mainly available in the above mentioned solution or in the new solution as shown here:
Component Extension 5.0 for SAP EHS Management – SAP Help Portal Page
Take first a survey in the doucments and links given and then coe back with furthere questions etc.
C.B.
PS: you need to drill down in any of the documents etc. as mentioned above to get the "details"to most of your questions

SAP Mill Products!

Hello all,
I am starting a upgrade from 4.6c CS to ECC 6.0 DIMP. Does anyone have any documentation about ECC 6.0 DIMP?
Thanks in advance,
Adelmo R Silva

Hi,
[SAP ECC-DIMP and SAP DBM|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cee822-8d16-2a10-9b99-83e017ac1952]
[Security Guide for SAP for Mill Products|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/005c36a1-9516-2a10-34a7-e1ca04acf762]
[SAP Industry Solution - SAP for Aerospace and Defense|help.sap.com/content/documentation/industry/docu_is_aero.htm]
[SAP ECC DIMP 5.0|help.sap.com/content/documentation/industry/index.htm]
Reward if helpful.
Thanks and Regards,
Naveen Dasari.

Predelivered Content for SAP EREC to be imported in PI

Hi ,
Could you explain how can i get the SAP's standard predelivered content of SAP EREC (TPZ file ) to be imported in PI ?
I need to do this inorder to use the SAP's recommended Message Interface / Service Interface .
Regards.
S

Hello,
The procedure for this case next:
Go to service.sap.com\swdc ->downloads -> Support Packages and Patches - Entry by Application Group -> SAP Content -> XI Content -> Choose required version of EREC.
After download maybe you should Unzip file (now you get TPZ file) and place them in import directory for ES Repository. Now you have to do in ES Repository next: Tools -> Import design objects.
BR,
Dzmitry

XI Content for SAP TM

Hi,
we are just preparing for coming projects in SAP Transportation Management.
After the training, I thought that there is an XI content available that can be used to import SD deliveries from an ERP system into TM.
Does anybody know about XI contents for TM? Is it contained in some basic XI contents? Or is there not yet a content available?
Of course we could try to create the interface manually, but I think this might take much time from design to execution ...
Best regards,
Martin

XI content is available for integration between ERP and TM. You can integrate SAP TM with SAP ERP using IDocs. The IDocs are converted via XI interfaces to the corresponding Business Objects in SAP TM.
The integration relates to following transmissions -
- Deliveries in ERP to Transportation Request (Shipment Request) in TM
- Shipments in ERP to TM for Tendering purpose
- Freight orders in TM to shipments in ERP for execution purpose
Shailesh

XI content for SAP SRM SERVER 6.0

Hi All,
I want to implement SRM-MDM CATALOG Business scenario, but i am not getting the XI content for Software Component Version <b>SAP SRM SERVER 6.0</b>.
Can anybody tell me from where to get the XI content for Software Component Version <b>SAP SRM SERVER 6.0</b>.
Helpful answers will be rewarded.
Thanks,
Shiv

Hi Shiv,
You can get the XI contents for SRM Server 6.0 under this URL:
https://websmp107.sap-ag.de/swdc
Support Packages and Patches -> SAP Application Components -> SAP SRM (WITH SAP EBP) -> SAP SRM 6.0 -> Entry by Component -> XI Content
But for this, you requires a valid marketplace user-id and password.
But according to my understanding, you can use the XI contents for SRM MDM Catalog 1.0 under SAP SRM 5.0 also.
The file name is SRMMDMCAT1000_2-20001719.ZIP.
Thanks

BI Content for SAP CRM

Hi,
We have a core CRM 2007 system and a BI 7.0 system that we are implementing on top of it.
We have BI cont 7.03 installed. The predelivered BI content for CRM that I find are all in the BI 3.x version. My question is - is it advisable to try to upgrade it to BI 7.0 version before use since this is a fresh implementation? What are the Pros & Cons of the same?
If we should convert the Business Content Objects individually to BI 7.0 version, what is the process? Do the transfer rules, update rules etc get converetd automatically into Transformation rules and DTPs?
Is there a way to upgrade the entire chain of objects (the way we activate them "in dataflow before or after the object")?
Any input will be highly appreciated.
Thanks & regards,
Nikhil

Hi,
Below the information you can get insights about the loyalty and BW Loyalty Implementaion .
http://wiki.sdn.sap.com/wiki/display/CRM/Marketing
below link would explain how the loyalty engne works..
want table details where rules in loyalty management stores
http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/d9/8f52a192b54e7c94e3aa22098e68b9/frameset.htm
trough below tables you can get number of points earned by a member based on Membership and for the same for redemption .
LOYD_MEM_MEMBER--- master data for member ship for loyalty man
LOYD_MSH_MEMS
LOYD_MSH_MS_MEMB -- Link Table for Membership and Member
LOYD_MA_SPECATTR --- table for membership activty .
Also you can search the tables by the key word LOYD* Most of the loyalty table start with LOYD*
Regards,
Satya

How/where do I get BPR-content for SAP best practices into solar01/solar02?

I am looking to use SAP Solution Manager to perform a blueprint & (parts of) a configuration/realization with a number of SAP ERP best practices as the starting point. Unfortunately the BPR-content for my solman seems to be missing as I cannot find any of the processes defined on http://service.sap.com/bestpractices when scoping the blueprint for my project in solar01. We have ST ICO150 loaded, or so I am told.
Is there additional content out there somewhere so I can add processes/scenarios into solar01 from best practices?

Hi
follow this guide
this is a step by step screenshot guide
https://websmp110.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
Hope query answered.
Regards
Prakhar

Business content for SAP Manufacturing Integration & Intelligence (SAP xMII

Hi,
Our requirement is to extract data from SAP xMII into BW. Are there any pre-configured extractors available to extract data for OEE, Down time etc. Are there any standard cubes / reports available in BI content that can be installed?
Appreciate your inputs.
Thanks in advance.
Best Regards,
Meera

Thanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag

Content for SAP Mill Products

Similar Messages

Maybe you are looking for