Content in Message Monitoring

Hi,
Can anybody help me to know the exact message(message content) in Message monitoring..
Thanks in Advance.

Hi Ravi,
Please refer the below blog
Michal's PI tips: Authorizations for viewing payload of messages on Java stack - implementation

Similar Messages

Displaying Message contents in Message Monitoring

Hi all,
I want to activate the Message contents displaying option in Message Display tool under the details option for messages in Message monitoring. I am not aware where to activate this field. Kindly help me as early as u can.
Regards,
Rookie

Hi prateek,
Thanks for quick respons. But prateek can you pleas tell me how can we activate the window to display the same information in RWB message monitoring.
As per my knowledge in Message monitoring if we select a message and click Details. We get a window with options like Message Data\ Message Contents and xml...
How can I activate the Contents window in RWB.

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

Message monitoring Status Waiting for email receiver

Hi Guru,
Scenario: SAP ECC will call Error Handling interface class. The communication channel for the Error Handling interface is Email Adapter.
Below is CC setting:
Adapter Type: Mail (Receiver)
Transport Protocol: SMTP
Message Protocol: XIALL
Adapter Engine: Integration Server
URL: smtp://11.11.11.111/
Check - Configure User Authentication
User : user1
Password: password
Mail Attributes:
From: [email protected]
To : [email protected]
Subject : test
Content Encoding: base64
I encountered one problem where my email receiver status in message monitoring is always 'Waiting'. I do not know what went wrong in the setting? Does anyone know how to solve my problem ?
Thanks in advance.
Regards

XI tries 3 times before changing the status of the message to System Error. One can Manually resend the error messages by using the RESEND button in RWB. In scenarios where XI was trying to send the message to an end system that was down for maintenance, you would want XI to resubmit the message automatically without human intervention. What would be nice is to able to tune the retries like IS_Retry which is available for Integration engine.
We can achieve this by changing the retry count used by the Adapter Engine, by default its set to 3 times, 5 minutes apart. This count can be changed in Visual Admin->server->services-> SAP XI Adapter: XI.
Here change the number Retries parameter from 3 to 10 and change the retry retryInterval to around 10minutes. For these configuration changes to be picked up, restart SAP XI Adapter: XI.
please visit the blog
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

To Be delivered status in Message monitoring

Hi,
There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
any input reg. this will be appreciated.
I didn't see any messages with TO BE delivered status in adapater engine.
I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
I have seen this thread & link also.
To Be Delivered
Re: "To be delivered" status in RWB -- Any solution?
http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
I could not see any entry in SMQ1, SMQ2, SM58 also
Thanks
Praba
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

Hi,
You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
Hope it will helps you
Cheers
Veera

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

In Message Monitoring Message showing holding status

Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
Holding
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Roy

Hi Debraj
HOLDING is a status which occurs normally for EOIO (Exactly Once In Order), so your message is set to Holding means some earlier message has not gone through. So until those messages are through this message will be in HOLDING state.
Have a look at this link which explains how to handle such scenarios.
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
cheers
Sameer
Assign points if it helped you

File Adapter picks up the file but cant see it in MONI/Message Monitoring

Hi
I am using FCC in Sender File Adapter and have only one sub structure under Recordset hence I have not used the 'Key Field Name' though ''Key Field Type' by default is 'String(Case-Sensitive)'. Besides the 'fieldNames' heading I have mentioned all the fields of the sub structure in the same order as I have mentioned in the Data Type.
The problem that I am facing is that even though the file is picked up from ftp successfully still I cant see any traces of it in either MONI or Message Monitoring though
The error that I receive in the MDT is -
Success : Entire file content converted to XML format
Warning : Empty document found. Proceed without sending message
Success : File "Test.csv" deleted after processing
and I have data in the file.
Can u suggest a solution?
Warm regards,
Vaibhav

> Hey
> >>So I have filled my test excel file with the values
> A and B in adjacent columns
> are you picking up some .xls file?if yes,then Content
> conversion wont work,You have to create adapter
> module processor and you have to add to your module
> processor bean to the adapter...Just check the
> following procedure...
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1967
> Thanx
> Aamir suhail
Hi Aamir
I had a look at the blog and according to that I will need to create a module...the prob with that is in the blog he hasnt provided the full steps for that. Also I had tried this thing earlier of using an excel file and saving it in .csv format and it had worked. I cant figure out what the error is this time
Have u worked on creating amodule for excel files b4?
Vaibhav

Messages are Holding in message monitoring tool

Hi All,
I am facing the problem with messages which are in holding state.
My scenario is file to proxy. The file content contains of EDI. my scenario is already gone to production last year.
and its working fine. Used java mappings for validation of EDI file. its running successfully.
where as in Dev system till october first i used to load the files in FTP inbox folder and messages were processed successfully.
But from october first week when i load the files in FTP inbox, file has been picking succesfully and can see the logs in sender comm channel but the i can see that my interface is in holding state in message monitoring tool and its not going to receiver comm channel. I have loaded 5 files and all are in holding state.
even i have cancelled first error message and tried to resend the next message swhich is in holding state, but this is not happening.
i am using EOIO queue.
when i cancel the error message remaining messages should processed automatically but its not getting processed here.
sequencing of the interface triggering is
1. Interface_1
2. Interface_2
3. Interface_3
4. Interface_4
Here i am stucking up with the first interface itself.Here only first interface is in holding state.
can any one advise what could be the problem..
I m on SP 10.
Thanks,
Bhaskar

Hi Abhijit,
Even after unchecking the checkbox maintain order at runtime, its not working.
i think there is no disturbed in message processing sequence.
my first sender interface itself going into hold state.
i have cancelled the hold message, even after that remaining messages are processing automatically.
and also i could not fine any messages in SMQ1 and SMQ2.
I also deresister and registered te queues and activated.
Kindly advise what would be the problem..
in production its working fine and development its not working fine.
Thanks,
Bhaskar

Errors in Message Display Tool (MDT) in Message Monitoring view of RWB

Hi mates,
Issue #1
When I select the message processed by an Adapter engine and click on 'Details' button, MDT window pops up and has three tabs. When I click on the tab 'Message Content' (which normally shows SOAP envelope and actuall payload) I get an error 'Content of message deleted to save memory'. I can see the content in other two tabs, Message Data and Audit Log properly though.
Whats wrong/missing? Plz clarify.
Issue #2
When I select the message processed by an Integration engine and click on 'Details' button, MDT window pops up and has four tabs.
When I click the the tab 'Message Content', I get cpl of warning messages 'SSO logon not possible; logon tickets not activated on the server' & 'No switch made to HTTPS; so it is unsafe to send your password'.
It gives someother info 'Choose "Log on" to continue A dialog box appears, where you can enter your user and password' When I click 'log on' and key in user credentials, it doesnot accept the correct values and after repeated attempts it says 'Either client, name, or password is incorrect; repeat logon' and doesnt show any payload.
Whats wrong/missing? Plz help me out.
I appreciate your inputs.
thx in adv
praveen

Gil,
Take a look at this thread. Should solve your problem,
Monitoring SOAP Message Payload
Regards,
Bhavesh

Loaded File not visible in XI Message Monitoring

Hi,
I have a configured a scenario where a flat file is integrated via XI File Sender Adapter. The file was loaded out of the file directory, but in XI Message Monitoring I can't see the message. In the Adapter Monitoring, the respective Communication Channel is green.
Any idea what this might be?
Thanks in advance.
Alex

Hi,
In general , we will follow the below steps
--First we we check for the file is picked or no, if not see the Sender side CC parameters like mode and path details
--If file was picked then we need to check whether we are using the File content conversion parameters or not if yes we need to check the FCC parameters ,
-- Goto RWB-Channelmonitoring by the following link
http://host:port/mdt/channelmonitorservlet
select the sender side CC name and check for errors
-- If no errors in above, goto SXMB_MONI for Integration Engine xml processing , check for successful or error occured black or red color
--if success in SXMB_MONI then we need to check in RWB as above channel monitor now select the receiver side CC
-- If no errors then check for output file is placed intarget or not
Regards
Chilla

Message Monitoring and Web services Sequences .. SOAMANAGER

When can I use Mesage Monitoring and Sequence Monitoring .
We are making a proof a concept and we are the following.
1. A program which executes a proxy and with this proxy we are consuming a web services.
2. The proxy and web services were implemented in the same Abap Machine .
3. We execute the test and everything works very well and we consume the webservice and the program displays the expected result.
Now want to know How can we use the Message Monitoring and the Sequence Monitoring . Is this posible ? Do we have to make any previous configuration?
We don´t have any XI installation and for that we wonder if we can monitorize the webservices sequences ?
Any idea about if we can realize such king of actions ..
Many Thanks

Hi
I assumes u have dual stack.
You can do the sequence monitoring with or without PI. But without PI you would achieve that thing on the local machine.
You have to do those things at Java End using SAP NWA.
Please see this link
http://help.sap.com/saphelp_nwce10/helpdata/en/46/b00c2a99930764e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/46/9cb2b57ded371ae10000000a11466f/content.htm

No authorization to view payload in auditLog Of Message Monitoring in RWB

Hello,
I am not able to view the message payload in the audit Log In Message Monitoring in RWB.
It says no authorization.
Can anybody tell me what authorization object is required for this?
Thanks,
Loveena

Hello,
Check the link below:
community/pi-and-soa-middleware/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
The configuration consist to set a parameter on NWA. Check the following step:
1. Go to <host>:<port>/nwa;
2. Go to Configuration Management and then Infrastructure;
3. Java System Properties;
4. Click on services tab and then search for XPI Service: Messaging System;
5. Search for messaging.syncMessageRemover.removeBody on parameters tab and modify from true to false. False value should be displayed in the custom value column.
After that, you'll be able to see the payload in RWB.
Regards,
Arthur Silva

Messages in Message Monitoring are being deleted?

Hi folks!
I'm facing a strage situation in our PI PRD system.
When I have to search for a message in the RWB Message Monitoring, sometimes happens that I got a specific message with its message ID, and then.. i look for it an hour later and the message isn't found anymore.. as it is being deleted or something.. the fact is I lose some messages there..
Does anybody know where can I find something about this? or where to look if they are being deleted?
Thanx in advance!
Juan

Hello Juan
What is the Quality of Service of the message?
Synchronous Message Processing (BE)
The message is only persisted by the Integration Engine in case of error (as an error version). Once a message has been processed in the target system it performs an implicit database commit.
Quality of Service
http://help.sap.com/saphelp_nw70/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
If you have configured Archiving and Deletion, check the link below:
Defining Interfaces and Retention Periods for Archiving
http://help.sap.com/saphelp_nw70/helpdata/en/41/b715015ffc11d5b3ea0050da403d6a/content.htm
Regards
Mark

Content in Message Monitoring

Similar Messages

Maybe you are looking for